diff --git a/TestON/tests/FuncIntent/Dependency/FuncIntentFunction.py b/TestON/tests/FuncIntent/Dependency/FuncIntentFunction.py
index 10930e3..3f41180 100644
--- a/TestON/tests/FuncIntent/Dependency/FuncIntentFunction.py
+++ b/TestON/tests/FuncIntent/Dependency/FuncIntentFunction.py
@@ -525,6 +525,7 @@
         else:
             srcMac = macsDict[ ingressDevice ]
             if srcMac == None:
+                main.log.debug( "There is no MAC in device - " + ingressDevice )
                 srcMac = ""
 
         intentsId.append( main.CLIs[ 0 ].addSinglepointToMultipointIntent(
@@ -613,6 +614,235 @@
 
     return stepResult
 
+def multiToSingleIntent( main,
+                         name,
+                         hostNames,
+                         devices="",
+                         ports=None,
+                         ethType="",
+                         macs=None,
+                         bandwidth="",
+                         lambdaAlloc=False,
+                         ipProto="",
+                         ipAddresses="",
+                         tcp="",
+                         sw1="",
+                         sw2="",
+                         expectedLink=0 ):
+    """
+        Verify Single to Multi Point intents
+        NOTE:If main.hostsData is not defined, variables data should be passed in the
+        same order index wise. All devices in the list should have the same
+        format, either all the devices have its port or it doesn't.
+        eg. hostName = [ 'h1', 'h2' ,..  ]
+            devices = [ 'of:0000000000000001', 'of:0000000000000002', ...]
+            ports = [ '1', '1', ..]
+            ...
+        Description:
+            Verify add-multi-to-single-intent
+        Steps:
+            - Get device ids | ports
+            - Add single to multi point intents
+            - Check intents
+            - Verify flows
+            - Ping hosts
+            - Reroute
+                - Link down
+                - Verify flows
+                - Check topology
+                - Ping hosts
+                - Link up
+                - Verify flows
+                - Check topology
+                - Ping hosts
+            - Remove intents
+        Required:
+            name - Type of point intent to add eg. IPV4 | VLAN | Dualstack
+            hostNames - List of host names
+        Optional:
+            devices - List of device ids in the same order as the hosts
+                      in hostNames
+            ports - List of port numbers in the same order as the device in
+                    devices
+            ethType - Ethernet type eg. IPV4, IPV6
+            macs - List of hosts mac address in the same order as the hosts in
+                   hostNames
+            bandwidth - Bandwidth capacity
+            lambdaAlloc - Allocate lambda, defaults to False
+            ipProto - IP protocol
+            ipAddresses - IP addresses of host in the same order as the hosts in
+                          hostNames
+            tcp - TCP ports in the same order as the hosts in hostNames
+            sw1 - First switch to bring down & up for rerouting purpose
+            sw2 - Second switch to bring down & up for rerouting purpose
+            expectedLink - Expected link when the switches are down, it should
+                           be two links lower than the links before the two
+                           switches are down
+    """
+
+    import time
+    import copy
+    assert main, "There is no main variable"
+    assert hostNames, "You must specify hosts"
+    assert devices or main.hostsData, "You must specify devices"
+
+    global itemName
+    itemName = name
+    tempHostsData = {}
+    intentsId = []
+
+    macsDict = {}
+    ipDict = {}
+    if hostNames and devices:
+        if len( hostNames ) != len( devices ):
+            main.log.debug( "hosts and devices does not have the same length" )
+            #print "len hostNames = ", len( hostNames )
+            #print "len devices = ", len( devices )
+            return main.FALSE
+        if ports:
+            if len( ports ) != len( devices ):
+                main.log.error( "Ports and devices does " +
+                                "not have the same length" )
+                #print "len devices = ", len( devices )
+                #print "len ports = ", len( ports )
+                return main.FALSE
+        for i in range( len( devices ) ):
+            macsDict[ devices[ i ] ] = macs[ i ]
+        else:
+            main.log.info( "Device Ports are not specified" )
+    elif hostNames and not devices and main.hostsData:
+        devices = []
+        main.log.info( "singleToMultiIntent function is using main.hostsData" ) 
+        for host in hostNames:
+               devices.append( main.hostsData.get( host ).get( 'location' ) )
+               macsDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+                           main.hostsData.get( host ).get( 'mac' )
+               ipDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+                           main.hostsData.get( host ).get( 'ipAddresses' )
+        #print main.hostsData
+
+    #print 'host names = ', hostNames
+    #print 'devices = ', devices
+    #print "macsDict = ", macsDict
+
+    pingResult = main.TRUE
+    intentResult = main.TRUE
+    removeIntentResult = main.TRUE
+    flowResult = main.TRUE
+    topoResult = main.TRUE
+    linkDownResult = main.TRUE
+    linkUpResult = main.TRUE
+
+    devicesCopy = copy.copy( devices )
+    if ports:
+        portsCopy = copy.copy( ports )
+    main.log.info( itemName + ": Adding single point to multi point intents" )
+    # Adding bidirectional point  intents
+    for i in range( len( devices ) ):
+        egressDevice = devicesCopy[ i ]
+        ingressDeviceList = copy.copy( devicesCopy )
+        ingressDeviceList.remove( egressDevice )
+        if ports:
+            portEgress = portsCopy[ i ]
+            portIngressList = copy.copy( portsCopy )
+            del portIngressList[ i ]
+        else:
+            portEgress = ""
+            portIngressList = None
+        if not macsDict:
+            dstMac = ""
+        else:
+            dstMac = macsDict[ egressDevice ]
+            if dstMac == None:
+                main.log.debug( "There is no MAC in device - " + egressDevice )
+                dstMac = ""
+
+        intentsId.append( main.CLIs[ 0 ].addMultipointToSinglepointIntent(
+                                            ingressDeviceList=ingressDeviceList,
+                                            egressDevice=egressDevice,
+                                            portIngressList=portIngressList,
+                                            portEgress=portEgress,
+                                            ethType=ethType,
+                                            ethDst=dstMac,
+                                            bandwidth=bandwidth,
+                                            lambdaAlloc=lambdaAlloc,
+                                            ipProto=ipProto,
+                                            ipSrc="",
+                                            ipDst="",
+                                            tcpSrc="",
+                                            tcpDst="" ) )
+
+    pingResult = pingallHosts( main, hostNames )
+
+    # Check intents state
+    time.sleep( 30 )
+    intentResult = checkIntentState( main, intentsId )
+
+    # Check intents state again if first check fails...
+    if not intentResult:
+        intentResult = checkIntentState( main, intentsId )
+
+    # Verify flows
+    checkFlowsState( main )
+
+    # Ping hosts
+    pingResult = pingResult and pingallHosts( main, hostNames )
+    # Ping hosts again...
+    pingResult = pingResult and pingallHosts( main, hostNames )
+    time.sleep( 5 )
+
+    # Test rerouting if these variables exist
+    if sw1 and sw2 and expectedLink:
+        # link down
+        linkDownResult = link( main, sw1, sw2, "down" )
+        intentResult = intentResult and checkIntentState( main, intentsId )
+
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, expectedLink )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link down
+        if linkDownResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link down" )
+        else:
+            main.log.error( itemName + ": Failed to bring link down" )
+
+        # link up
+        linkUpResult = link( main, sw1, sw2, "up" )
+        time.sleep( 5 )
+
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, main.numLinks )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link up
+        if linkUpResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link back up" )
+        else:
+            main.log.error( itemName + ": Failed to bring link back up" )
+
+    # Remove all intents
+    removeIntentResult = removeAllIntents( main, intentsId )
+
+    stepResult = pingResult and linkDownResult and linkUpResult \
+                 and intentResult and removeIntentResult
+
+    return stepResult
+
 def pingallHosts( main, hostList, pingType="ipv4" ):
     # Ping all host in the hosts list variable
     print "Pinging : ", hostList
diff --git a/TestON/tests/FuncIntent/FuncIntent.params b/TestON/tests/FuncIntent/FuncIntent.params
deleted file mode 100755
index 7535811..0000000
--- a/TestON/tests/FuncIntent/FuncIntent.params
+++ /dev/null
@@ -1,34 +0,0 @@
-<PARAMS>
-
-    <testcases>10,11,12,13,1001,1002,1003</testcases>
-
-    <SCALE>1,3</SCALE>
-    <availableNodes>3</availableNodes>
-    <ENV>
-        <cellName>functionality</cellName>
-        <cellApps>drivers,openflow,proxyarp,mobility</cellApps>
-    </ENV>
-    <GIT>
-        <pull>False</pull>
-        <branch>master</branch>
-    </GIT>
-    <CTRL>
-        <num>3</num>
-        <ip1>OC1</ip1>
-        <port1>6633</port1>
-        <ip2>OC2</ip2>
-        <port2>6633</port2>
-        <ip3>OC3</ip3>
-        <port3>6633</port3>
-    </CTRL>
-    <BENCH>
-        <user>admin</user>
-        <ip1>OCN</ip1>
-    </BENCH>
-    <MININET>
-        <switch>7</switch>
-        <links>20</links>
-        <topo>~/mininet/custom/newFuncTopo.py</topo>
-    </MININET>
-
-</PARAMS>
diff --git a/TestON/tests/FuncIntent/FuncIntent.py b/TestON/tests/FuncIntent/FuncIntent.py
index 4bab329..d5dc2a7 100644
--- a/TestON/tests/FuncIntent/FuncIntent.py
+++ b/TestON/tests/FuncIntent/FuncIntent.py
@@ -433,6 +433,7 @@
                                  onpass="DUALSTACK1: Add point intent" +
                                         " successful",
                                  onfail="DUALSTACK1: Add point intent failed" )
+
     def CASE1003( self, main ):
         """
             Add single point to multi point intents
@@ -492,9 +493,6 @@
 
         main.step( "IPV4_2: Add single point to multi point intents" )
         hostNames = [ 'h8', 'h16', 'h24' ]
-        devices = [ 'of:0000000000000005/8', 'of:0000000000000006/8', \
-                    'of:0000000000000007/8' ]
-        macs = [ '00:00:00:00:00:08', '00:00:00:00:00:10', '00:00:00:00:00:18' ]
         stepResult = main.wrapper.singleToMultiIntent(
                                          main,
                                          name="IPV4",
@@ -527,3 +525,56 @@
                     - Ping hosts
                 - Remove intents
         """
+        assert main, "There is no main"
+        assert main.CLIs, "There is no main.CLIs"
+        assert main.Mininet1, "Mininet handle should be named Mininet1"
+        assert main.numSwitch, "Placed the total number of switch topology in \
+                                main.numSwitch"
+
+        main.case( "Add multi point to single point intents between devices" )
+
+        stepResult = main.TRUE
+        main.step( "IPV4: Add multi point to single point intents" )
+        hostNames = [ 'h8', 'h16', 'h24' ]
+        devices = [ 'of:0000000000000005/8', 'of:0000000000000006/8', \
+                    'of:0000000000000007/8' ]
+        macs = [ '00:00:00:00:00:08', '00:00:00:00:00:10', '00:00:00:00:00:18' ]
+        stepResult = main.wrapper.multiToSingleIntent(
+                                         main,
+                                         name="IPV4",
+                                         hostNames=hostNames,
+                                         devices=devices,
+                                         ports=None,
+                                         ethType="IPV4",
+                                         macs=macs,
+                                         bandwidth="",
+                                         lambdaAlloc=False,
+                                         ipProto="",
+                                         ipAddresses="",
+                                         tcp="",
+                                         sw1="s5",
+                                         sw2="s2",
+                                         expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="IPV4: Successfully added multi point"
+                                        + " to single point intents",
+                                 onfail="IPV4: Failed to add multi point" +
+                                        " to single point intents" )
+
+        main.step( "IPV4_2: Add multi point to single point intents" )
+        hostNames = [ 'h8', 'h16', 'h24' ]
+        stepResult = main.wrapper.multiToSingleIntent(
+                                         main,
+                                         name="IPV4",
+                                         hostNames=hostNames,
+                                         ethType="IPV4",
+                                         lambdaAlloc=False )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="IPV4_2: Successfully added multi point"
+                                        + " to single point intents",
+                                 onfail="IPV4_2: Failed to add multi point" +
+                                        " to single point intents" )