diff --git a/TestON/lib/Mininet/INSTALL b/TestON/lib/Mininet/INSTALL
new file mode 100644
index 0000000..d3e4695
--- /dev/null
+++ b/TestON/lib/Mininet/INSTALL
@@ -0,0 +1,123 @@
+
+Mininet Installation/Configuration Notes
+----------------------------------------
+
+Mininet 2.0.0
+---
+
+The supported installation methods for Mininet are 1) using a
+pre-built VM image, and 2) native installation on Ubuntu. You can also
+easily create your own Mininet VM image (4).
+
+(Other distributions may be supported in the future - if you would
+like to contribute an installation script, we would welcome it!)
+
+1. Easiest "installation" - use our pre-built VM image!
+
+   The easiest way to get Mininet running is to start with one of our
+   pre-built virtual machine images from <http://openflow.org/mininet>
+
+   Boot up the VM image, log in, and follow the instructions on the
+   Mininet web site.
+
+   One advantage of using the VM image is that it doesn't mess with
+   your native OS installation or damage it in any way.
+
+   Although a single Mininet instance can simulate multiple networks
+   with multiple controllers, only one Mininet instance may currently
+   be run at a time, and Mininet requires root access in the machine
+   it's running on.  Therefore, if you have a multiuser system, you
+   may wish to consider running Mininet in a VM.
+
+2. Next-easiest option: use our Ubuntu package!
+
+   To install Mininet itself (i.e. `mn` and the Python API) on Ubuntu
+   12.10+:
+
+        sudo apt-get install mininet
+
+   Note: if you are upgrading from an older version of Mininet, make
+   sure you remove the old OVS from `/usr/local`:
+
+        sudo rm /usr/local/bin/ovs*
+        sudo rm /usr/local/sbin/ovs*
+
+3. Native installation from source on Ubuntu 11.10+
+
+   If you're reading this, you've probably already done so, but the
+   command to download the Mininet source code is:
+
+        git clone git://github.com/mininet/mininet.git
+
+   If you are running Ubuntu, you may be able to use our handy
+   `install.sh` script, which is in `mininet/util`.
+
+   *WARNING: USE AT YOUR OWN RISK!*
+
+   `install.sh` is a bit intrusive and may possibly damage your OS
+   and/or home directory, by creating/modifying several directories
+   such as `mininet`, `openflow`, `oftest`, `pox`, or `noxcosre`.
+   Although we hope it won't do anything completely terrible, you may
+   want to look at the script before you run it, and you should make
+   sure your system and home directory are backed up just in case!
+
+   To install Mininet itself, the OpenFlow reference implementation, and
+   Open vSwitch, you may use:
+
+        mininet/util/install.sh -fnv
+
+   This should be reasonably quick, and the following command should
+   work after the installation:
+
+        sudo mn --test pingall
+
+   To install ALL of the software which we use for OpenFlow tutorials,
+   including POX, the OpenFlow WireShark dissector, the `oftest`
+   framework, and other potentially useful software (and to add some
+   stuff to `/etc/sysctl.conf` which may or may not be useful) you may
+   use:
+
+        mininet/util/install.sh -a
+
+   This takes about 4 minutes on our test system.
+
+4. Creating your own Mininet/OpenFlow tutorial VM
+
+   Creating your own Ubuntu Mininet VM for use with the OpenFlow tutorial
+   is easy! First, create a new Ubuntu VM. Next, run two commands in it:
+
+        wget https://raw.github.com/mininet/mininet/master/util/vm/install-mininet-vm.sh
+        time install-mininet-vm.sh
+
+   Finally, verify that Mininet is installed and working in the VM:
+
+        sudo mn --test pingall
+
+5. Installation on other Linux distributions
+
+   Although we don't support other Linux distributions directly, it
+   should be possible to install and run Mininet with some degree of
+   manual effort.
+
+   In general, you must have:
+
+   * A Linux kernel compiled with network namespace support enabled
+
+   * An OpenFlow implementation (either the reference user or kernel
+     space implementations, or Open vSwitch.) Appropriate kernel
+     modules (e.g. tun and ofdatapath for the reference kernel
+     implementation) must be loaded.
+
+   * Python, `bash`, `ping`, `iperf`, etc.`
+
+   * Root privileges (required for network device access)
+
+   We encourage contribution of patches to the `install.sh` script to
+   support other Linux distributions.
+
+
+Good luck!
+
+Mininet Team
+
+---