add test case 10, 11 for I2, add check flow status to test cases
Change-Id: I9eba42059393289b0337dccc9af3d25e0126259e
diff --git a/TestON/tests/USECASE_SdnipI2/USECASE_SdnipI2.py b/TestON/tests/USECASE_SdnipI2/USECASE_SdnipI2.py
index c1ff688..45ea369 100644
--- a/TestON/tests/USECASE_SdnipI2/USECASE_SdnipI2.py
+++ b/TestON/tests/USECASE_SdnipI2/USECASE_SdnipI2.py
@@ -232,12 +232,20 @@
onfail = "***MultiPointToSinglePoint Intent Num in SDN-IP is \
wrong!***" )
+ main.step( "Check whether all flow status are ADDED" )
+ utilities.assertEquals( \
+ expect = main.TRUE,
+ actual = main.ONOScli.checkFlowsState( isPENDING_ADD = False ),
+ onpass = "***Flow status is correct!***",
+ onfail = "***Flow status is wrong!***" )
+
def CASE4( self, main ):
'''
Ping test in data plane for each route
'''
main.case( "This case is to check ping for each route" )
+ main.step( "Start ping tests between hosts behind BGP peers" )
result1 = main.Mininet.pingHost( src = "host64514", target = "host64515" )
result2 = main.Mininet.pingHost( src = "host64515", target = "host64516" )
result3 = main.Mininet.pingHost( src = "host64514", target = "host64516" )
@@ -291,6 +299,13 @@
main.log.info( "Bring down link failed!!!" )
main.exit();
+ main.step( "Check whether all flow status are ADDED" )
+ utilities.assertEquals( \
+ expect = main.TRUE,
+ actual = main.ONOScli.checkFlowsState( isPENDING_ADD = False ),
+ onpass = "***Flow status is correct!***",
+ onfail = "***Flow status is wrong!***" )
+
def CASE6(self, main):
'''
@@ -330,6 +345,13 @@
else:
main.log.info( "Bring up link failed!!!" )
main.exit();
+
+ main.step( "Check whether all flow status are ADDED" )
+ utilities.assertEquals( \
+ expect = main.TRUE,
+ actual = main.ONOScli.checkFlowsState( isPENDING_ADD = False ),
+ onpass = "***Flow status is correct!***",
+ onfail = "***Flow status is wrong!***" )
'''
Note: at the end of this test case, we should carry out ping test.
So we run CASE4 again after CASE6
@@ -354,6 +376,13 @@
main.log.info( "Stop switch failed!!!" )
main.exit();
+ main.step( "Check whether all flow status are ADDED" )
+ utilities.assertEquals( \
+ expect = main.TRUE,
+ actual = main.ONOScli.checkFlowsState( isPENDING_ADD = False ),
+ onpass = "***Flow status is correct!***",
+ onfail = "***Flow status is wrong!***" )
+
'''
main.step( "Stop sw8" )
result = main.Mininet.switch( SW = "sw8", OPTION = "stop" )
@@ -407,12 +436,99 @@
main.cleanup()
main.exit();
+ main.step( "Check whether all flow status are ADDED" )
+ utilities.assertEquals( \
+ expect = main.TRUE,
+ actual = main.ONOScli.checkFlowsState( isPENDING_ADD = False ),
+ onpass = "***Flow status is correct!***",
+ onfail = "***Flow status is wrong!***" )
+
+
+ def CASE9(self, main):
+ '''
+ Bring down a switch in best path, check:
+ route number, P2P intent number, M2S intent number, ping test
+ '''
+ main.case( "This case is to stop switch in best path, \
+ check route number, P2P intent number, M2S intent number, ping test" )
+
+ main.step( "Check the flow status before stopping sw11" )
+ main.Functions.checkFlowNum( main, "sw11", 13 )
+ main.Functions.checkFlowNum( main, "sw1", 3 )
+ main.Functions.checkFlowNum( main, "sw7", 3 )
+ main.log.info( main.Mininet.checkFlows( "sw11" ) )
+ main.log.info( main.Mininet.checkFlows( "sw1" ) )
+ main.log.info( main.Mininet.checkFlows( "sw7" ) )
+
+ main.step( "Stop sw11" )
+ result = main.Mininet.switch( SW = "sw11", OPTION = "stop" )
+ if result:
+ time.sleep( int( main.params[ 'timers' ][ 'RouteDelivery' ] ) )
+ main.Functions.checkRouteNum( main, 3 )
+ main.Functions.checkM2SintentNum( main, 3 )
+ main.Functions.checkP2PintentNum( main, 18 )
+
+ else:
+ main.log.info( "Stop switch failed!!!" )
+ main.cleanup()
+ main.exit();
+
+ main.step( "Check whether all flow status are ADDED" )
+ utilities.assertEquals( \
+ expect = main.TRUE,
+ actual = main.ONOScli.checkFlowsState( isPENDING_ADD = False ),
+ onpass = "***Flow status is correct!***",
+ onfail = "***Flow status is wrong!***" )
+ '''
+ Note: this test case should be followed by ping test, CASE1 and CASE4
+ '''
+
+
+ def CASE10( self, main ):
+ '''
+ Bring up the switch which was stopped in CASE9, check:
+ route number, P2P intent number, M2S intent number, ping test
+ '''
+ main.case( "This case is to start switch which was stopped in CASE9, \
+ check route number, P2P intent number, M2S intent number, ping test" )
+ main.step( "Start sw11" )
+ result = main.Mininet.switch( SW = "sw11", OPTION = "start" )
+ if result:
+ time.sleep( int( main.params[ 'timers' ][ 'RouteDelivery' ] ) )
+ main.Functions.checkRouteNum( main, 3 )
+ main.Functions.checkM2SintentNum( main, 3 )
+ main.Functions.checkP2PintentNum( main, 18 )
+
+ main.step( "Check the flow status after stop and start sw11" )
+ main.Functions.checkFlowNum( main, "sw11", 3 )
+ main.Functions.checkFlowNum( main, "sw1", 11 )
+ main.Functions.checkFlowNum( main, "sw7", 5 )
+ main.log.info( main.Mininet.checkFlows( "sw11" ) )
+ main.log.info( main.Mininet.checkFlows( "sw1" ) )
+ main.log.info( main.Mininet.checkFlows( "sw7" ) )
+ else:
+ main.log.info( "Start switch failed!!!" )
+ main.cleanup()
+ main.exit();
+
+ main.step( "Check whether all flow status are ADDED" )
+ utilities.assertEquals( \
+ expect = main.TRUE,
+ actual = main.ONOScli.checkFlowsState( isPENDING_ADD = False ),
+ onpass = "***Flow status is correct!***",
+ onfail = "***Flow status is wrong!***" )
+ '''
+ Note: this test case should be followed by ping test, CASE1 and CASE4
+ '''
+
def CASE20( self, main ):
'''
ping test from 3 bgp peers to BGP speaker
'''
- main.case( "This case is to check ping between BGP peers and speakers" )
+ main.case( "This case is to check ping between BGP peers and speakers, \
+ and expect all ping tests to fail." )
+ main.step( "Start ping tests between BGP speaker and BGP peers" )
result1 = main.Mininet.pingHost( src = "speaker1", target = "peer64514" )
result2 = main.Mininet.pingHost( src = "speaker1", target = "peer64515" )
result3 = main.Mininet.pingHost( src = "speaker1", target = "peer64516" )
@@ -432,7 +548,9 @@
'''
Ping test in data plane for each route
'''
- main.case( "This case is to check ping for each route" )
+ main.case( "This case is to check ping for each route, and expect \
+ all ping tests to fail." )
+ main.step( "Start ping tests between hosts behind BGP peers" )
result1 = main.Mininet.pingHost( src = "host64514", target = "host64515" )
result2 = main.Mininet.pingHost( src = "host64515", target = "host64516" )
result3 = main.Mininet.pingHost( src = "host64514", target = "host64516" )