"""
Description: This test is to determine if ONOS can handle
    all of it's nodes restarting

List of test cases:
CASE1: Compile ONOS and push it to the test machines
CASE2: Assign mastership to controllers
CASE3: Assign intents
CASE4: Ping across added host intents
CASE5: Reading state of ONOS
CASE6: The Failure case.
CASE7: Check state after control plane failure
CASE8: Compare topo
CASE9: Link s3-s28 down
CASE10: Link s3-s28 up
CASE11: Switch down
CASE12: Switch up
CASE13: Clean up
CASE14: start election app on all onos nodes
CASE15: Check that Leadership Election is still functional
CASE16: Install Distributed Primitives app
CASE17: Check for basic functionality with distributed primitives
"""


class HATestClusterRestart:

    def __init__( self ):
        self.default = ''

    def CASE1( self, main ):
        """
        CASE1 is to compile ONOS and push it to the test machines

        Startup sequence:
        cell <name>
        onos-verify-cell
        NOTE: temporary - onos-remove-raft-logs
        onos-uninstall
        start mininet
        git pull
        mvn clean install
        onos-package
        onos-install -f
        onos-wait-for-start
        start cli sessions
        start tcpdump
        """
        main.log.info( "ONOS HA test: Restart all ONOS nodes - " +
                         "initialization" )
        main.case( "Setting up test environment" )
        main.caseExplaination = "Setup the test environment including " +\
                                "installing ONOS, starting Mininet and ONOS" +\
                                "cli sessions."
        # TODO: save all the timers and output them for plotting

        # load some variables from the params file
        PULLCODE = False
        if main.params[ 'Git' ] == 'True':
            PULLCODE = True
        gitBranch = main.params[ 'branch' ]
        cellName = main.params[ 'ENV' ][ 'cellName' ]

        # set global variables
        global ONOS1Port
        global ONOS2Port
        global ONOS3Port
        global ONOS4Port
        global ONOS5Port
        global ONOS6Port
        global ONOS7Port
        global numControllers
        numControllers = int( main.params[ 'num_controllers' ] )

        # FIXME: just get controller port from params?
        # TODO: do we really need all these?
        ONOS1Port = main.params[ 'CTRL' ][ 'port1' ]
        ONOS2Port = main.params[ 'CTRL' ][ 'port2' ]
        ONOS3Port = main.params[ 'CTRL' ][ 'port3' ]
        ONOS4Port = main.params[ 'CTRL' ][ 'port4' ]
        ONOS5Port = main.params[ 'CTRL' ][ 'port5' ]
        ONOS6Port = main.params[ 'CTRL' ][ 'port6' ]
        ONOS7Port = main.params[ 'CTRL' ][ 'port7' ]

        global CLIs
        CLIs = []
        global nodes
        nodes = []
        for i in range( 1, numControllers + 1 ):
            CLIs.append( getattr( main, 'ONOScli' + str( i ) ) )
            nodes.append( getattr( main, 'ONOS' + str( i ) ) )

        main.step( "Applying cell variable to environment" )
        cellResult = main.ONOSbench.setCell( cellName )
        verifyResult = main.ONOSbench.verifyCell()

        # FIXME:this is short term fix
        main.log.info( "Removing raft logs" )
        main.ONOSbench.onosRemoveRaftLogs()

        main.log.info( "Uninstalling ONOS" )
        for node in nodes:
            main.ONOSbench.onosUninstall( node.ip_address )

        # Make sure ONOS is DEAD
        main.log.info( "Killing any ONOS processes" )
        killResults = main.TRUE
        for node in nodes:
            killed = main.ONOSbench.onosKill( node.ip_address )
            killResults = killResults and killed

        cleanInstallResult = main.TRUE
        gitPullResult = main.TRUE

        main.step( "Starting Mininet" )
        mnResult = main.Mininet1.startNet( )
        utilities.assert_equals( expect=main.TRUE, actual=mnResult,
                                 onpass="Mininet Started",
                                 onfail="Error starting Mininet" )

        main.step( "Git checkout and pull " + gitBranch )
        if PULLCODE:
            main.ONOSbench.gitCheckout( gitBranch )
            gitPullResult = main.ONOSbench.gitPull()
            # values of 1 or 3 are good
            utilities.assert_lesser( expect=0, actual=gitPullResult,
                                      onpass="Git pull successful",
                                      onfail="Git pull failed" )
        main.ONOSbench.getVersion( report=True )

        main.step( "Using mvn clean install" )
        cleanInstallResult = main.TRUE
        if PULLCODE and gitPullResult == main.TRUE:
            cleanInstallResult = main.ONOSbench.cleanInstall()
        else:
            main.log.warn( "Did not pull new code so skipping mvn " +
                           "clean install" )
        utilities.assert_equals( expect=main.TRUE,
                                 actual=cleanInstallResult,
                                 onpass="MCI successful",
                                 onfail="MCI failed" )
        # GRAPHS
        # NOTE: important params here:
        #       job = name of Jenkins job
        #       Plot Name = Plot-HA, only can be used if multiple plots
        #       index = The number of the graph under plot name
        job = "HAClusterRestart"
        plotName = "Plot-HA"
        graphs = '<ac:structured-macro ac:name="html">\n'
        graphs += '<ac:plain-text-body><![CDATA[\n'
        graphs += '<iframe src="https://onos-jenkins.onlab.us/job/' + job +\
                  '/plot/' + plotName + '/getPlot?index=0' +\
                  '&width=500&height=300"' +\
                  'noborder="0" width="500" height="300" scrolling="yes" ' +\
                  'seamless="seamless"></iframe>\n'
        graphs += ']]></ac:plain-text-body>\n'
        graphs += '</ac:structured-macro>\n'
        main.log.wiki(graphs)

        main.step( "Creating ONOS package" )
        packageResult = main.ONOSbench.onosPackage()
        utilities.assert_equals( expect=main.TRUE, actual=packageResult,
                                 onpass="ONOS package successful",
                                 onfail="ONOS package failed" )

        main.step( "Installing ONOS package" )
        onosInstallResult = main.TRUE
        for node in nodes:
            tmpResult = main.ONOSbench.onosInstall( options="-f",
                                                    node=node.ip_address )
            onosInstallResult = onosInstallResult and tmpResult
        utilities.assert_equals( expect=main.TRUE, actual=onosInstallResult,
                                 onpass="ONOS install successful",
                                 onfail="ONOS install failed" )

        main.step( "Checking if ONOS is up yet" )
        for i in range( 2 ):
            onosIsupResult = main.TRUE
            for node in nodes:
                started = main.ONOSbench.isup( node.ip_address )
                if not started:
                    main.log.error( node.name + " didn't start!" )
                    main.ONOSbench.onosStop( node.ip_address )
                    main.ONOSbench.onosStart( node.ip_address )
                onosIsupResult = onosIsupResult and started
            if onosIsupResult == main.TRUE:
                break
        utilities.assert_equals( expect=main.TRUE, actual=onosIsupResult,
                                 onpass="ONOS startup successful",
                                 onfail="ONOS startup failed" )

        main.log.step( "Starting ONOS CLI sessions" )
        cliResults = main.TRUE
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].startOnosCli,
                             name="startOnosCli-" + str( i ),
                             args=[nodes[i].ip_address] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            cliResults = cliResults and t.result
        utilities.assert_equals( expect=main.TRUE, actual=cliResults,
                                 onpass="ONOS cli startup successful",
                                 onfail="ONOS cli startup failed" )

        if main.params[ 'tcpdump' ].lower() == "true":
            main.step( "Start Packet Capture MN" )
            main.Mininet2.startTcpdump(
                str( main.params[ 'MNtcpdump' ][ 'folder' ] ) + str( main.TEST )
                + "-MN.pcap",
                intf=main.params[ 'MNtcpdump' ][ 'intf' ],
                port=main.params[ 'MNtcpdump' ][ 'port' ] )

        main.step( "App Ids check" )
        appCheck = main.TRUE
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].appToIDCheck,
                             name="appToIDCheck-" + str( i ),
                             args=[] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            appCheck = appCheck and t.result
        if appCheck != main.TRUE:
            main.log.warn( CLIs[0].apps() )
            main.log.warn( CLIs[0].appIDs() )
        utilities.assert_equals( expect=main.TRUE, actual=appCheck,
                                 onpass="App Ids seem to be correct",
                                 onfail="Something is wrong with app Ids" )

        if cliResults == main.FALSE:
            main.log.error( "Failed to start ONOS, stopping test" )
            main.cleanup()
            main.exit()

    def CASE2( self, main ):
        """
        Assign mastership to controllers
        """
        import re
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"
        assert ONOS1Port, "ONOS1Port not defined"
        assert ONOS2Port, "ONOS2Port not defined"
        assert ONOS3Port, "ONOS3Port not defined"
        assert ONOS4Port, "ONOS4Port not defined"
        assert ONOS5Port, "ONOS5Port not defined"
        assert ONOS6Port, "ONOS6Port not defined"
        assert ONOS7Port, "ONOS7Port not defined"

        main.case( "Assigning Controllers" )
        main.caseExplaination = "Assign switches to ONOS using 'ovs-vsctl' " +\
                                "and check that an ONOS node becomes the " +\
                                "master of the device. Then manually assign" +\
                                " mastership to specific ONOS nodes using" +\
                                " 'device-role'"
        main.step( "Assign switches to controllers" )

        # TODO: rewrite this function to take lists of ips and ports?
        #       or list of tuples?
        for i in range( 1, 29 ):
            main.Mininet1.assignSwController(
                sw=str( i ),
                count=numControllers,
                ip1=nodes[ 0 ].ip_address, port1=ONOS1Port,
                ip2=nodes[ 1 ].ip_address, port2=ONOS2Port,
                ip3=nodes[ 2 ].ip_address, port3=ONOS3Port,
                ip4=nodes[ 3 ].ip_address, port4=ONOS4Port,
                ip5=nodes[ 4 ].ip_address, port5=ONOS5Port,
                ip6=nodes[ 5 ].ip_address, port6=ONOS6Port,
                ip7=nodes[ 6 ].ip_address, port7=ONOS7Port )

        mastershipCheck = main.TRUE
        for i in range( 1, 29 ):
            response = main.Mininet1.getSwController( "s" + str( i ) )
            try:
                main.log.info( str( response ) )
            except Exception:
                main.log.info( repr( response ) )
            for node in nodes:
                if re.search( "tcp:" + node.ip_address, response ):
                    mastershipCheck = mastershipCheck and main.TRUE
                else:
                    main.log.error( "Error, node " + node.ip_address + " is " +
                                    "not in the list of controllers s" +
                                    str( i ) + " is connecting to." )
                    mastershipCheck = main.FALSE
        utilities.assert_equals(
            expect=main.TRUE,
            actual=mastershipCheck,
            onpass="Switch mastership assigned correctly",
            onfail="Switches not assigned correctly to controllers" )

        main.step( "Assign mastership of switches to specific controllers" )
        # Manually assign mastership to the controller we want
        roleCall = main.TRUE

        ipList = [ ]
        deviceList = []
        try:
            for i in range( 1, 29 ):  # switches 1 through 28
                # set up correct variables:
                if i == 1:
                    ip = nodes[ 0 ].ip_address  # ONOS1
                    deviceId = main.ONOScli1.getDevice( "1000" ).get( 'id' )
                elif i == 2:
                    ip = nodes[ 1 ].ip_address  # ONOS2
                    deviceId = main.ONOScli1.getDevice( "2000" ).get( 'id' )
                elif i == 3:
                    ip = nodes[ 1 ].ip_address  # ONOS2
                    deviceId = main.ONOScli1.getDevice( "3000" ).get( 'id' )
                elif i == 4:
                    ip = nodes[ 3 ].ip_address  # ONOS4
                    deviceId = main.ONOScli1.getDevice( "3004" ).get( 'id' )
                elif i == 5:
                    ip = nodes[ 2 ].ip_address  # ONOS3
                    deviceId = main.ONOScli1.getDevice( "5000" ).get( 'id' )
                elif i == 6:
                    ip = nodes[ 2 ].ip_address  # ONOS3
                    deviceId = main.ONOScli1.getDevice( "6000" ).get( 'id' )
                elif i == 7:
                    ip = nodes[ 5 ].ip_address  # ONOS6
                    deviceId = main.ONOScli1.getDevice( "6007" ).get( 'id' )
                elif i >= 8 and i <= 17:
                    ip = nodes[ 4 ].ip_address  # ONOS5
                    dpid = '3' + str( i ).zfill( 3 )
                    deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' )
                elif i >= 18 and i <= 27:
                    ip = nodes[ 6 ].ip_address  # ONOS7
                    dpid = '6' + str( i ).zfill( 3 )
                    deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' )
                elif i == 28:
                    ip = nodes[ 0 ].ip_address  # ONOS1
                    deviceId = main.ONOScli1.getDevice( "2800" ).get( 'id' )
                else:
                    main.log.error( "You didn't write an else statement for " +
                                    "switch s" + str( i ) )
                # Assign switch
                assert deviceId, "No device id for s" + str( i ) + " in ONOS"
                # TODO: make this controller dynamic
                roleCall = roleCall and main.ONOScli1.deviceRole( deviceId,
                                                                  ip )
                ipList.append( ip )
                deviceList.append( deviceId )
        except ( AttributeError, AssertionError ):
            main.log.exception( "Something is wrong with ONOS device view" )
            main.log.info( main.ONOScli1.devices() )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=roleCall,
            onpass="Re-assigned switch mastership to designated controller",
            onfail="Something wrong with deviceRole calls" )

        main.step( "Check mastership was correctly assigned" )
        roleCheck = main.TRUE
        # NOTE: This is due to the fact that device mastership change is not
        #       atomic and is actually a multi step process
        time.sleep( 5 )
        for i in range( len( ipList ) ):
            ip = ipList[i]
            deviceId = deviceList[i]
            # Check assignment
            master = main.ONOScli1.getRole( deviceId ).get( 'master' )
            if ip in master:
                roleCheck = roleCheck and main.TRUE
            else:
                roleCheck = roleCheck and main.FALSE
                main.log.error( "Error, controller " + ip + " is not" +
                                " master " + "of device " +
                                str( deviceId ) + ". Master is " +
                                repr( master ) + "." )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=roleCheck,
            onpass="Switches were successfully reassigned to designated " +
                   "controller",
            onfail="Switches were not successfully reassigned" )
        mastershipCheck = mastershipCheck and roleCall and roleCheck
        utilities.assert_equals( expect=main.TRUE, actual=mastershipCheck,
                                 onpass="Switch mastership correctly assigned",
                                 onfail="Error in (re)assigning switch" +
                                 " mastership" )

    def CASE3( self, main ):
        """
        Assign intents
        """
        import time
        import json
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"
        # NOTE: we must reinstall intents until we have a persistant intent
        #        datastore!
        main.case( "Adding host Intents" )
        main.caseExplaination = "Discover hosts by using pingall then " +\
                                "assign predetermined host-to-host intents." +\
                                " After installation, check that the intent" +\
                                " is distributed to all nodes and the state" +\
                                " is INSTALLED"

        # install onos-app-fwd
        main.step( "Install reactive forwarding app" )
        installResults = CLIs[0].activateApp( "org.onosproject.fwd" )
        utilities.assert_equals( expect=main.TRUE, actual=installResults,
                                 onpass="Install fwd successful",
                                 onfail="Install fwd failed" )

        main.step( "Check app ids" )
        appCheck = main.TRUE
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].appToIDCheck,
                             name="appToIDCheck-" + str( i ),
                             args=[] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            appCheck = appCheck and t.result
        if appCheck != main.TRUE:
            main.log.warn( CLIs[0].apps() )
            main.log.warn( CLIs[0].appIDs() )
        utilities.assert_equals( expect=main.TRUE, actual=appCheck,
                                 onpass="App Ids seem to be correct",
                                 onfail="Something is wrong with app Ids" )

        main.step( "Discovering Hosts( Via pingall for now )" )
        # FIXME: Once we have a host discovery mechanism, use that instead
        # REACTIVE FWD test
        pingResult = main.FALSE
        for i in range(2):  # Retry if pingall fails first time
            time1 = time.time()
            pingResult = main.Mininet1.pingall()
            utilities.assert_equals(
                expect=main.TRUE,
                actual=pingResult,
                onpass="Reactive Pingall test passed",
                onfail="Reactive Pingall failed, " +
                       "one or more ping pairs failed" )
            time2 = time.time()
            main.log.info( "Time for pingall: %2f seconds" %
                           ( time2 - time1 ) )
        # timeout for fwd flows
        time.sleep( 11 )
        # uninstall onos-app-fwd
        main.step( "Uninstall reactive forwarding app" )
        uninstallResult = CLIs[0].deactivateApp( "org.onosproject.fwd" )
        utilities.assert_equals( expect=main.TRUE, actual=uninstallResult,
                                 onpass="Uninstall fwd successful",
                                 onfail="Uninstall fwd failed" )

        main.step( "Check app ids" )
        threads = []
        appCheck2 = main.TRUE
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].appToIDCheck,
                             name="appToIDCheck-" + str( i ),
                             args=[] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            appCheck2 = appCheck2 and t.result
        if appCheck2 != main.TRUE:
            main.log.warn( CLIs[0].apps() )
            main.log.warn( CLIs[0].appIDs() )
        utilities.assert_equals( expect=main.TRUE, actual=appCheck2,
                                 onpass="App Ids seem to be correct",
                                 onfail="Something is wrong with app Ids" )

        main.step( "Add host intents via cli" )
        intentIds = []
        # TODO:  move the host numbers to params
        #        Maybe look at all the paths we ping?
        intentAddResult = True
        hostResult = main.TRUE
        for i in range( 8, 18 ):
            main.log.info( "Adding host intent between h" + str( i ) +
                           " and h" + str( i + 10 ) )
            host1 = "00:00:00:00:00:" + \
                str( hex( i )[ 2: ] ).zfill( 2 ).upper()
            host2 = "00:00:00:00:00:" + \
                str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper()
            # NOTE: getHost can return None
            host1Dict = main.ONOScli1.getHost( host1 )
            host2Dict = main.ONOScli1.getHost( host2 )
            host1Id = None
            host2Id = None
            if host1Dict and host2Dict:
                host1Id = host1Dict.get( 'id', None )
                host2Id = host2Dict.get( 'id', None )
            if host1Id and host2Id:
                nodeNum = ( i % 7 )
                tmpId = CLIs[ nodeNum ].addHostIntent( host1Id, host2Id )
                if tmpId:
                    main.log.info( "Added intent with id: " + tmpId )
                    intentIds.append( tmpId )
                else:
                    main.log.error( "addHostIntent returned: " +
                                     repr( tmpId ) )
            else:
                main.log.error( "Error, getHost() failed for h" + str( i ) +
                                " and/or h" + str( i + 10 ) )
                hosts = CLIs[ 0 ].hosts()
                main.log.warn( "Hosts output: " )
                try:
                    main.log.warn( json.dumps( json.loads( hosts ),
                                               sort_keys=True,
                                               indent=4,
                                               separators=( ',', ': ' ) ) )
                except ( ValueError, TypeError ):
                    main.log.warn( repr( hosts ) )
                hostResult = main.FALSE
        utilities.assert_equals( expect=main.TRUE, actual=hostResult,
                                 onpass="Found a host id for each host",
                                 onfail="Error looking up host ids" )

        intentStart = time.time()
        onosIds = main.ONOScli1.getAllIntentsId()
        main.log.info( "Submitted intents: " + str( intentIds ) )
        main.log.info( "Intents in ONOS: " + str( onosIds ) )
        for intent in intentIds:
            if intent in onosIds:
                pass  # intent submitted is in onos
            else:
                intentAddResult = False
        if intentAddResult:
            intentStop = time.time()
        else:
            intentStop = None
        # Print the intent states
        intents = main.ONOScli1.intents()
        intentStates = []
        installedCheck = True
        main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
        count = 0
        try:
            for intent in json.loads( intents ):
                state = intent.get( 'state', None )
                if "INSTALLED" not in state:
                    installedCheck = False
                intentId = intent.get( 'id', None )
                intentStates.append( ( intentId, state ) )
        except ( ValueError, TypeError ):
            main.log.exception( "Error parsing intents" )
        # add submitted intents not in the store
        tmplist = [ i for i, s in intentStates ]
        missingIntents = False
        for i in intentIds:
            if i not in tmplist:
                intentStates.append( ( i, " - " ) )
                missingIntents = True
        intentStates.sort()
        for i, s in intentStates:
            count += 1
            main.log.info( "%-6s%-15s%-15s" %
                           ( str( count ), str( i ), str( s ) ) )
        leaders = main.ONOScli1.leaders()
        try:
            if leaders:
                parsedLeaders = json.loads( leaders )
                main.log.warn( json.dumps( parsedLeaders,
                                           sort_keys=True,
                                           indent=4,
                                           separators=( ',', ': ' ) ) )
                # check for all intent partitions
                topics = []
                for i in range( 14 ):
                    topics.append( "intent-partition-" + str( i ) )
                main.log.debug( topics )
                ONOStopics = [ j['topic'] for j in parsedLeaders ]
                for topic in topics:
                    if topic not in ONOStopics:
                        main.log.error( "Error: " + topic +
                                        " not in leaders" )
            else:
                main.log.error( "leaders() returned None" )
        except ( ValueError, TypeError ):
            main.log.exception( "Error parsing leaders" )
            main.log.error( repr( leaders ) )
        partitions = main.ONOScli1.partitions()
        try:
            if partitions :
                parsedPartitions = json.loads( partitions )
                main.log.warn( json.dumps( parsedPartitions,
                                           sort_keys=True,
                                           indent=4,
                                           separators=( ',', ': ' ) ) )
                # TODO check for a leader in all paritions
                # TODO check for consistency among nodes
            else:
                main.log.error( "partitions() returned None" )
        except ( ValueError, TypeError ):
            main.log.exception( "Error parsing partitions" )
            main.log.error( repr( partitions ) )
        pendingMap = main.ONOScli1.pendingMap()
        try:
            if pendingMap :
                parsedPending = json.loads( pendingMap )
                main.log.warn( json.dumps( parsedPending,
                                           sort_keys=True,
                                           indent=4,
                                           separators=( ',', ': ' ) ) )
                # TODO check something here?
            else:
                main.log.error( "pendingMap() returned None" )
        except ( ValueError, TypeError ):
            main.log.exception( "Error parsing pending map" )
            main.log.error( repr( pendingMap ) )

        intentAddResult = bool( intentAddResult and not missingIntents and
                                installedCheck )
        if not intentAddResult:
            main.log.error( "Error in pushing host intents to ONOS" )

        main.step( "Intent Anti-Entropy dispersion" )
        for i in range(100):
            correct = True
            main.log.info( "Submitted intents: " + str( sorted( intentIds ) ) )
            for cli in CLIs:
                onosIds = []
                ids = cli.getAllIntentsId()
                onosIds.append( ids )
                main.log.debug( "Intents in " + cli.name + ": " +
                                str( sorted( onosIds ) ) )
                if sorted( ids ) != sorted( intentIds ):
                    # IF intents are missing
                    correct = False
                    break
                else:
                    intents = json.loads( cli.intents() )
                    for intent in intents:
                        if intent[ 'state' ] != "INSTALLED":
                            correct = False
                            break
            if correct:
                break
            else:
                time.sleep(1)
        if not intentStop:
            intentStop = time.time()
        global gossipTime
        gossipTime = intentStop - intentStart
        main.log.info( "It took about " + str( gossipTime ) +
                        " seconds for all intents to appear in each node" )
        # FIXME: make this time configurable/calculate based off of number of
        #        nodes and gossip rounds
        utilities.assert_greater_equals(
                expect=40, actual=gossipTime,
                onpass="ECM anti-entropy for intents worked within " +
                       "expected time",
                onfail="Intent ECM anti-entropy took too long" )
        if gossipTime <= 40:
            intentAddResult = True

        if not intentAddResult or "key" in pendingMap:
            import time
            installedCheck = True
            main.log.info( "Sleeping 60 seconds to see if intents are found" )
            time.sleep( 60 )
            onosIds = main.ONOScli1.getAllIntentsId()
            main.log.info( "Submitted intents: " + str( intentIds ) )
            main.log.info( "Intents in ONOS: " + str( onosIds ) )
            # Print the intent states
            intents = main.ONOScli1.intents()
            intentStates = []
            main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
            count = 0
            try:
                for intent in json.loads( intents ):
                    # Iter through intents of a node
                    state = intent.get( 'state', None )
                    if "INSTALLED" not in state:
                        installedCheck = False
                    intentId = intent.get( 'id', None )
                    intentStates.append( ( intentId, state ) )
            except ( ValueError, TypeError ):
                main.log.exception( "Error parsing intents" )
            # add submitted intents not in the store
            tmplist = [ i for i, s in intentStates ]
            for i in intentIds:
                if i not in tmplist:
                    intentStates.append( ( i, " - " ) )
            intentStates.sort()
            for i, s in intentStates:
                count += 1
                main.log.info( "%-6s%-15s%-15s" %
                               ( str( count ), str( i ), str( s ) ) )
            leaders = main.ONOScli1.leaders()
            try:
                if leaders:
                    parsedLeaders = json.loads( leaders )
                    main.log.warn( json.dumps( parsedLeaders,
                                               sort_keys=True,
                                               indent=4,
                                               separators=( ',', ': ' ) ) )
                    # check for all intent partitions
                    # check for election
                    topics = []
                    for i in range( 14 ):
                        topics.append( "intent-partition-" + str( i ) )
                    # FIXME: this should only be after we start the app
                    topics.append( "org.onosproject.election" )
                    main.log.debug( topics )
                    ONOStopics = [ j['topic'] for j in parsedLeaders ]
                    for topic in topics:
                        if topic not in ONOStopics:
                            main.log.error( "Error: " + topic +
                                            " not in leaders" )
                else:
                    main.log.error( "leaders() returned None" )
            except ( ValueError, TypeError ):
                main.log.exception( "Error parsing leaders" )
                main.log.error( repr( leaders ) )
            partitions = main.ONOScli1.partitions()
            try:
                if partitions :
                    parsedPartitions = json.loads( partitions )
                    main.log.warn( json.dumps( parsedPartitions,
                                               sort_keys=True,
                                               indent=4,
                                               separators=( ',', ': ' ) ) )
                    # TODO check for a leader in all paritions
                    # TODO check for consistency among nodes
                else:
                    main.log.error( "partitions() returned None" )
            except ( ValueError, TypeError ):
                main.log.exception( "Error parsing partitions" )
                main.log.error( repr( partitions ) )
            pendingMap = main.ONOScli1.pendingMap()
            try:
                if pendingMap :
                    parsedPending = json.loads( pendingMap )
                    main.log.warn( json.dumps( parsedPending,
                                               sort_keys=True,
                                               indent=4,
                                               separators=( ',', ': ' ) ) )
                    # TODO check something here?
                else:
                    main.log.error( "pendingMap() returned None" )
            except ( ValueError, TypeError ):
                main.log.exception( "Error parsing pending map" )
                main.log.error( repr( pendingMap ) )

    def CASE4( self, main ):
        """
        Ping across added host intents
        """
        import json
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"
        main.case( "Verify connectivity by sendind traffic across Intents" )
        main.caseExplaination = "Ping across added host intents to check " +\
                                "functionality and check the state of " +\
                                "the intent"
        main.step( "Ping across added host intents" )
        PingResult = main.TRUE
        for i in range( 8, 18 ):
            ping = main.Mininet1.pingHost( src="h" + str( i ),
                                           target="h" + str( i + 10 ) )
            PingResult = PingResult and ping
            if ping == main.FALSE:
                main.log.warn( "Ping failed between h" + str( i ) +
                               " and h" + str( i + 10 ) )
            elif ping == main.TRUE:
                main.log.info( "Ping test passed!" )
                # Don't set PingResult or you'd override failures
        if PingResult == main.FALSE:
            main.log.error(
                "Intents have not been installed correctly, pings failed." )
            # TODO: pretty print
            main.log.warn( "ONOS1 intents: " )
            try:
                tmpIntents = main.ONOScli1.intents()
                main.log.warn( json.dumps( json.loads( tmpIntents ),
                                           sort_keys=True,
                                           indent=4,
                                           separators=( ',', ': ' ) ) )
            except ( ValueError, TypeError ):
                main.log.warn( repr( tmpIntents ) )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=PingResult,
            onpass="Intents have been installed correctly and pings work",
            onfail="Intents have not been installed correctly, pings failed." )

        main.step( "Check Intent state" )
        installedCheck = False
        count = 0
        while not installedCheck and count < 40:
            installedCheck = True
            # Print the intent states
            intents = main.ONOScli1.intents()
            intentStates = []
            main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
            count = 0
            # Iter through intents of a node
            try:
                for intent in json.loads( intents ):
                    state = intent.get( 'state', None )
                    if "INSTALLED" not in state:
                        installedCheck = False
                    intentId = intent.get( 'id', None )
                    intentStates.append( ( intentId, state ) )
            except ( ValueError, TypeError ):
                main.log.exception( "Error parsing intents." )
            # Print states
            intentStates.sort()
            for i, s in intentStates:
                count += 1
                main.log.info( "%-6s%-15s%-15s" %
                               ( str( count ), str( i ), str( s ) ) )
            if not installedCheck:
                time.sleep( 1 )
                count += 1
        utilities.assert_equals( expect=True, actual=installedCheck,
                                 onpass="Intents are all INSTALLED",
                                 onfail="Intents are not all in " +
                                        "INSTALLED state" )

        main.step( "Check leadership of topics" )
        leaders = main.ONOScli1.leaders()
        topicCheck = main.TRUE
        try:
            if leaders:
                parsedLeaders = json.loads( leaders )
                main.log.warn( json.dumps( parsedLeaders,
                                           sort_keys=True,
                                           indent=4,
                                           separators=( ',', ': ' ) ) )
                # check for all intent partitions
                # check for election
                # TODO: Look at Devices as topics now that it uses this system
                topics = []
                for i in range( 14 ):
                    topics.append( "intent-partition-" + str( i ) )
                # FIXME: this should only be after we start the app
                # FIXME: topics.append( "org.onosproject.election" )
                # Print leaders output
                main.log.debug( topics )
                ONOStopics = [ j['topic'] for j in parsedLeaders ]
                for topic in topics:
                    if topic not in ONOStopics:
                        main.log.error( "Error: " + topic +
                                        " not in leaders" )
                        topicCheck = main.FALSE
            else:
                main.log.error( "leaders() returned None" )
                topicCheck = main.FALSE
        except ( ValueError, TypeError ):
            topicCheck = main.FALSE
            main.log.exception( "Error parsing leaders" )
            main.log.error( repr( leaders ) )
            # TODO: Check for a leader of these topics
        utilities.assert_equals( expect=main.TRUE, actual=topicCheck,
                                 onpass="intent Partitions is in leaders",
                                 onfail="Some topics were lost " )
        # Print partitions
        partitions = main.ONOScli1.partitions()
        try:
            if partitions :
                parsedPartitions = json.loads( partitions )
                main.log.warn( json.dumps( parsedPartitions,
                                           sort_keys=True,
                                           indent=4,
                                           separators=( ',', ': ' ) ) )
                # TODO check for a leader in all paritions
                # TODO check for consistency among nodes
            else:
                main.log.error( "partitions() returned None" )
        except ( ValueError, TypeError ):
            main.log.exception( "Error parsing partitions" )
            main.log.error( repr( partitions ) )
        # Print Pending Map
        pendingMap = main.ONOScli1.pendingMap()
        try:
            if pendingMap :
                parsedPending = json.loads( pendingMap )
                main.log.warn( json.dumps( parsedPending,
                                           sort_keys=True,
                                           indent=4,
                                           separators=( ',', ': ' ) ) )
                # TODO check something here?
            else:
                main.log.error( "pendingMap() returned None" )
        except ( ValueError, TypeError ):
            main.log.exception( "Error parsing pending map" )
            main.log.error( repr( pendingMap ) )
        main.log.info( "Waiting 60 seconds to see if the state of " +
                       "intents change" )
        time.sleep( 60 )
        if not installedCheck:
            # Print the intent states
            intents = main.ONOScli1.intents()
            intentStates = []
            main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
            count = 0
            # Iter through intents of a node
            try:
                for intent in json.loads( intents ):
                    state = intent.get( 'state', None )
                    if "INSTALLED" not in state:
                        installedCheck = False
                    intentId = intent.get( 'id', None )
                    intentStates.append( ( intentId, state ) )
            except ( ValueError, TypeError ):
                main.log.exception( "Error parsing intents." )
            intentStates.sort()
            for i, s in intentStates:
                count += 1
                main.log.info( "%-6s%-15s%-15s" %
                               ( str( count ), str( i ), str( s ) ) )
            leaders = main.ONOScli1.leaders()
            try:
                if leaders:
                    parsedLeaders = json.loads( leaders )
                    main.log.warn( json.dumps( parsedLeaders,
                                               sort_keys=True,
                                               indent=4,
                                               separators=( ',', ': ' ) ) )
                    # check for all intent partitions
                    # check for election
                    topics = []
                    for i in range( 14 ):
                        topics.append( "intent-partition-" + str( i ) )
                    # FIXME: this should only be after we start the app
                    topics.append( "org.onosproject.election" )
                    main.log.debug( topics )
                    ONOStopics = [ j['topic'] for j in parsedLeaders ]
                    for topic in topics:
                        if topic not in ONOStopics:
                            main.log.error( "Error: " + topic +
                                            " not in leaders" )
                else:
                    main.log.error( "leaders() returned None" )
            except ( ValueError, TypeError ):
                main.log.exception( "Error parsing leaders" )
                main.log.error( repr( leaders ) )
            partitions = main.ONOScli1.partitions()
            try:
                if partitions :
                    parsedPartitions = json.loads( partitions )
                    main.log.warn( json.dumps( parsedPartitions,
                                               sort_keys=True,
                                               indent=4,
                                               separators=( ',', ': ' ) ) )
                    # TODO check for a leader in all paritions
                    # TODO check for consistency among nodes
                else:
                    main.log.error( "partitions() returned None" )
            except ( ValueError, TypeError ):
                main.log.exception( "Error parsing partitions" )
                main.log.error( repr( partitions ) )
            pendingMap = main.ONOScli1.pendingMap()
            try:
                if pendingMap :
                    parsedPending = json.loads( pendingMap )
                    main.log.warn( json.dumps( parsedPending,
                                               sort_keys=True,
                                               indent=4,
                                               separators=( ',', ': ' ) ) )
                    # TODO check something here?
                else:
                    main.log.error( "pendingMap() returned None" )
            except ( ValueError, TypeError ):
                main.log.exception( "Error parsing pending map" )
                main.log.error( repr( pendingMap ) )
        # Print flowrules
        main.log.debug( CLIs[0].flows( jsonFormat=False ) )
        main.step( "Wait a minute then ping again" )
        # the wait is above
        PingResult = main.TRUE
        for i in range( 8, 18 ):
            ping = main.Mininet1.pingHost( src="h" + str( i ),
                                           target="h" + str( i + 10 ) )
            PingResult = PingResult and ping
            if ping == main.FALSE:
                main.log.warn( "Ping failed between h" + str( i ) +
                               " and h" + str( i + 10 ) )
            elif ping == main.TRUE:
                main.log.info( "Ping test passed!" )
                # Don't set PingResult or you'd override failures
        if PingResult == main.FALSE:
            main.log.error(
                "Intents have not been installed correctly, pings failed." )
            # TODO: pretty print
            main.log.warn( "ONOS1 intents: " )
            try:
                tmpIntents = main.ONOScli1.intents()
                main.log.warn( json.dumps( json.loads( tmpIntents ),
                                           sort_keys=True,
                                           indent=4,
                                           separators=( ',', ': ' ) ) )
            except ( ValueError, TypeError ):
                main.log.warn( repr( tmpIntents ) )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=PingResult,
            onpass="Intents have been installed correctly and pings work",
            onfail="Intents have not been installed correctly, pings failed." )

    def CASE5( self, main ):
        """
        Reading state of ONOS
        """
        import json
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"
        # assumes that sts is already in you PYTHONPATH
        from sts.topology.teston_topology import TestONTopology

        main.case( "Setting up and gathering data for current state" )
        # The general idea for this test case is to pull the state of
        # ( intents,flows, topology,... ) from each ONOS node
        # We can then compare them with each other and also with past states

        main.step( "Check that each switch has a master" )
        global mastershipState
        mastershipState = '[]'

        # Assert that each device has a master
        rolesNotNull = main.TRUE
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].rolesNotNull,
                             name="rolesNotNull-" + str( i ),
                             args=[] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            rolesNotNull = rolesNotNull and t.result
        utilities.assert_equals(
            expect=main.TRUE,
            actual=rolesNotNull,
            onpass="Each device has a master",
            onfail="Some devices don't have a master assigned" )

        main.step( "Get the Mastership of each switch from each controller" )
        ONOSMastership = []
        mastershipCheck = main.FALSE
        consistentMastership = True
        rolesResults = True
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].roles,
                             name="roles-" + str( i ),
                             args=[] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            ONOSMastership.append( t.result )

        for i in range( numControllers ):
            if not ONOSMastership[i] or "Error" in ONOSMastership[i]:
                main.log.error( "Error in getting ONOS" + str( i + 1 ) +
                                 " roles" )
                main.log.warn(
                    "ONOS" + str( i + 1 ) + " mastership response: " +
                    repr( ONOSMastership[i] ) )
                rolesResults = False
        utilities.assert_equals(
            expect=True,
            actual=rolesResults,
            onpass="No error in reading roles output",
            onfail="Error in reading roles from ONOS" )

        main.step( "Check for consistency in roles from each controller" )
        if all([ i == ONOSMastership[ 0 ] for i in ONOSMastership ] ):
            main.log.info(
                "Switch roles are consistent across all ONOS nodes" )
        else:
            consistentMastership = False
        utilities.assert_equals(
            expect=True,
            actual=consistentMastership,
            onpass="Switch roles are consistent across all ONOS nodes",
            onfail="ONOS nodes have different views of switch roles" )

        if rolesResults and not consistentMastership:
            for i in range( numControllers ):
                try:
                    main.log.warn(
                        "ONOS" + str( i + 1 ) + " roles: ",
                        json.dumps(
                            json.loads( ONOSMastership[ i ] ),
                            sort_keys=True,
                            indent=4,
                            separators=( ',', ': ' ) ) )
                except ( ValueError, TypeError ):
                    main.log.warn( repr( ONOSMastership[ i ] ) )
        elif rolesResults and consistentMastership:
            mastershipCheck = main.TRUE
            mastershipState = ONOSMastership[ 0 ]

        main.step( "Get the intents from each controller" )
        global intentState
        intentState = []
        ONOSIntents = []
        intentCheck = main.FALSE
        consistentIntents = True
        intentsResults = True
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].intents,
                             name="intents-" + str( i ),
                             args=[],
                             kwargs={ 'jsonFormat': True } )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            ONOSIntents.append( t.result )

        for i in range( numControllers ):
            if not ONOSIntents[ i ] or "Error" in ONOSIntents[ i ]:
                main.log.error( "Error in getting ONOS" + str( i + 1 ) +
                                 " intents" )
                main.log.warn( "ONOS" + str( i + 1 ) + " intents response: " +
                               repr( ONOSIntents[ i ] ) )
                intentsResults = False
        utilities.assert_equals(
            expect=True,
            actual=intentsResults,
            onpass="No error in reading intents output",
            onfail="Error in reading intents from ONOS" )

        main.step( "Check for consistency in Intents from each controller" )
        if all([ sorted( i ) == sorted( ONOSIntents[ 0 ] ) for i in ONOSIntents ] ):
            main.log.info( "Intents are consistent across all ONOS " +
                             "nodes" )
        else:
            consistentIntents = False
            main.log.error( "Intents not consistent" )
        utilities.assert_equals(
            expect=True,
            actual=consistentIntents,
            onpass="Intents are consistent across all ONOS nodes",
            onfail="ONOS nodes have different views of intents" )

        if intentsResults:
            # Try to make it easy to figure out what is happening
            #
            # Intent      ONOS1      ONOS2    ...
            #  0x01     INSTALLED  INSTALLING
            #  ...        ...         ...
            #  ...        ...         ...
            title = "   Id"
            for n in range( numControllers ):
                title += " " * 10 + "ONOS" + str( n + 1 )
            main.log.warn( title )
            # get all intent keys in the cluster
            keys = []
            for nodeStr in ONOSIntents:
                node = json.loads( nodeStr )
                for intent in node:
                    keys.append( intent.get( 'id' ) )
            keys = set( keys )
            for key in keys:
                row = "%-13s" % key
                for nodeStr in ONOSIntents:
                    node = json.loads( nodeStr )
                    for intent in node:
                        if intent.get( 'id', "Error" ) == key:
                            row += "%-15s" % intent.get( 'state' )
                main.log.warn( row )
            # End table view

        if intentsResults and not consistentIntents:
            # print the json objects
            n = len(ONOSIntents)
            main.log.debug( "ONOS" + str( n ) + " intents: " )
            main.log.debug( json.dumps( json.loads( ONOSIntents[ -1 ] ),
                                        sort_keys=True,
                                        indent=4,
                                        separators=( ',', ': ' ) ) )
            for i in range( numControllers ):
                if ONOSIntents[ i ] != ONOSIntents[ -1 ]:
                    main.log.debug( "ONOS" + str( i + 1 ) + " intents: " )
                    main.log.debug( json.dumps( json.loads( ONOSIntents[i] ),
                                                sort_keys=True,
                                                indent=4,
                                                separators=( ',', ': ' ) ) )
                else:
                    main.log.debug( nodes[ i ].name + " intents match ONOS" +
                                    str( n ) + " intents" )
        elif intentsResults and consistentIntents:
            intentCheck = main.TRUE
            intentState = ONOSIntents[ 0 ]

        main.step( "Get the flows from each controller" )
        global flowState
        flowState = []
        ONOSFlows = []
        ONOSFlowsJson = []
        flowCheck = main.FALSE
        consistentFlows = True
        flowsResults = True
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].flows,
                             name="flows-" + str( i ),
                             args=[],
                             kwargs={ 'jsonFormat': True } )
            threads.append( t )
            t.start()

        # NOTE: Flows command can take some time to run
        time.sleep(30)
        for t in threads:
            t.join()
            result = t.result
            ONOSFlows.append( result )

        for i in range( numControllers ):
            num = str( i + 1 )
            if not ONOSFlows[ i ] or "Error" in ONOSFlows[ i ]:
                main.log.error( "Error in getting ONOS" + num + " flows" )
                main.log.warn( "ONOS" + num + " flows response: " +
                               repr( ONOSFlows[ i ] ) )
                flowsResults = False
                ONOSFlowsJson.append( None )
            else:
                try:
                    ONOSFlowsJson.append( json.loads( ONOSFlows[ i ] ) )
                except ( ValueError, TypeError ):
                    # FIXME: change this to log.error?
                    main.log.exception( "Error in parsing ONOS" + num +
                                        " response as json." )
                    main.log.error( repr( ONOSFlows[ i ] ) )
                    ONOSFlowsJson.append( None )
                    flowsResults = False
        utilities.assert_equals(
            expect=True,
            actual=flowsResults,
            onpass="No error in reading flows output",
            onfail="Error in reading flows from ONOS" )

        main.step( "Check for consistency in Flows from each controller" )
        tmp = [ len( i ) == len( ONOSFlowsJson[ 0 ] ) for i in ONOSFlowsJson ]
        if all( tmp ):
            main.log.info( "Flow count is consistent across all ONOS nodes" )
        else:
            consistentFlows = False
        utilities.assert_equals(
            expect=True,
            actual=consistentFlows,
            onpass="The flow count is consistent across all ONOS nodes",
            onfail="ONOS nodes have different flow counts" )

        if flowsResults and not consistentFlows:
            for i in range( numControllers ):
                try:
                    main.log.warn(
                        "ONOS" + str( i + 1 ) + " flows: " +
                        json.dumps( json.loads( ONOSFlows[i] ), sort_keys=True,
                                    indent=4, separators=( ',', ': ' ) ) )
                except ( ValueError, TypeError ):
                    main.log.warn(
                        "ONOS" + str( i + 1 ) + " flows: " +
                        repr( ONOSFlows[ i ] ) )
        elif flowsResults and consistentFlows:
            flowCheck = main.TRUE
            flowState = ONOSFlows[ 0 ]

        main.step( "Get the OF Table entries" )
        global flows
        flows = []
        for i in range( 1, 29 ):
            flows.append( main.Mininet2.getFlowTable( 1.3, "s" + str( i ) ) )
        if flowCheck == main.FALSE:
            for table in flows:
                main.log.warn( table )
        # TODO: Compare switch flow tables with ONOS flow tables

        main.step( "Start continuous pings" )
        main.Mininet2.pingLong(
            src=main.params[ 'PING' ][ 'source1' ],
            target=main.params[ 'PING' ][ 'target1' ],
            pingTime=500 )
        main.Mininet2.pingLong(
            src=main.params[ 'PING' ][ 'source2' ],
            target=main.params[ 'PING' ][ 'target2' ],
            pingTime=500 )
        main.Mininet2.pingLong(
            src=main.params[ 'PING' ][ 'source3' ],
            target=main.params[ 'PING' ][ 'target3' ],
            pingTime=500 )
        main.Mininet2.pingLong(
            src=main.params[ 'PING' ][ 'source4' ],
            target=main.params[ 'PING' ][ 'target4' ],
            pingTime=500 )
        main.Mininet2.pingLong(
            src=main.params[ 'PING' ][ 'source5' ],
            target=main.params[ 'PING' ][ 'target5' ],
            pingTime=500 )
        main.Mininet2.pingLong(
            src=main.params[ 'PING' ][ 'source6' ],
            target=main.params[ 'PING' ][ 'target6' ],
            pingTime=500 )
        main.Mininet2.pingLong(
            src=main.params[ 'PING' ][ 'source7' ],
            target=main.params[ 'PING' ][ 'target7' ],
            pingTime=500 )
        main.Mininet2.pingLong(
            src=main.params[ 'PING' ][ 'source8' ],
            target=main.params[ 'PING' ][ 'target8' ],
            pingTime=500 )
        main.Mininet2.pingLong(
            src=main.params[ 'PING' ][ 'source9' ],
            target=main.params[ 'PING' ][ 'target9' ],
            pingTime=500 )
        main.Mininet2.pingLong(
            src=main.params[ 'PING' ][ 'source10' ],
            target=main.params[ 'PING' ][ 'target10' ],
            pingTime=500 )

        main.step( "Create TestONTopology object" )
        ctrls = []
        for node in nodes:
            temp = ( node, node.name, node.ip_address, 6633 )
            ctrls.append( temp )
        MNTopo = TestONTopology( main.Mininet1, ctrls )

        main.step( "Collecting topology information from ONOS" )
        devices = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].devices,
                             name="devices-" + str( i ),
                             args=[ ] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            devices.append( t.result )
        hosts = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].hosts,
                             name="hosts-" + str( i ),
                             args=[ ] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            try:
                hosts.append( json.loads( t.result ) )
            except ( ValueError, TypeError ):
                # FIXME: better handling of this, print which node
                #        Maybe use thread name?
                main.log.exception( "Error parsing json output of hosts" )
                # FIXME: should this be an empty json object instead?
                hosts.append( None )

        ports = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].ports,
                             name="ports-" + str( i ),
                             args=[ ] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            ports.append( t.result )
            try:
                # FIXME: DEBUG
                main.log.debug( json.dumps( json.loads( t.result ),
                                            sort_keys=True,
                                            indent=4,
                                            separators=( ',', ': ' ) ) )
            except:
                main.log.debug( repr( t.result ) )
        links = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].links,
                             name="links-" + str( i ),
                             args=[ ] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            links.append( t.result )
        clusters = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].clusters,
                             name="clusters-" + str( i ),
                             args=[ ] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            clusters.append( t.result )
        # Compare json objects for hosts and dataplane clusters

        # hosts
        main.step( "Host view is consistent across ONOS nodes" )
        consistentHostsResult = main.TRUE
        for controller in range( len( hosts ) ):
            controllerStr = str( controller + 1 )
            if "Error" not in hosts[ controller ]:
                if hosts[ controller ] == hosts[ 0 ]:
                    continue
                else:  # hosts not consistent
                    main.log.error( "hosts from ONOS" +
                                     controllerStr +
                                     " is inconsistent with ONOS1" )
                    main.log.warn( repr( hosts[ controller ] ) )
                    consistentHostsResult = main.FALSE

            else:
                main.log.error( "Error in getting ONOS hosts from ONOS" +
                                 controllerStr )
                consistentHostsResult = main.FALSE
                main.log.warn( "ONOS" + controllerStr +
                               " hosts response: " +
                               repr( hosts[ controller ] ) )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=consistentHostsResult,
            onpass="Hosts view is consistent across all ONOS nodes",
            onfail="ONOS nodes have different views of hosts" )

        main.step( "Each host has an IP address" )
        ipResult = main.TRUE
        for controller in range( 0, len( hosts ) ):
            controllerStr = str( controller + 1 )
            for host in hosts[ controller ]:
                if not host.get( 'ipAddresses', [ ] ):
                    main.log.error( "DEBUG:Error with host ips on controller" +
                                    controllerStr + ": " + str( host ) )
                    ipResult = main.FALSE
        utilities.assert_equals(
            expect=main.TRUE,
            actual=ipResult,
            onpass="The ips of the hosts aren't empty",
            onfail="The ip of at least one host is missing" )

        # Strongly connected clusters of devices
        main.step( "Cluster view is consistent across ONOS nodes" )
        consistentClustersResult = main.TRUE
        for controller in range( len( clusters ) ):
            controllerStr = str( controller + 1 )
            if "Error" not in clusters[ controller ]:
                if clusters[ controller ] == clusters[ 0 ]:
                    continue
                else:  # clusters not consistent
                    main.log.error( "clusters from ONOS" + controllerStr +
                                     " is inconsistent with ONOS1" )
                    consistentClustersResult = main.FALSE

            else:
                main.log.error( "Error in getting dataplane clusters " +
                                 "from ONOS" + controllerStr )
                consistentClustersResult = main.FALSE
                main.log.warn( "ONOS" + controllerStr +
                               " clusters response: " +
                               repr( clusters[ controller ] ) )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=consistentClustersResult,
            onpass="Clusters view is consistent across all ONOS nodes",
            onfail="ONOS nodes have different views of clusters" )
        # there should always only be one cluster
        main.step( "Cluster view correct across ONOS nodes" )
        try:
            numClusters = len( json.loads( clusters[ 0 ] ) )
        except ( ValueError, TypeError ):
            main.log.exception( "Error parsing clusters[0]: " +
                                repr( clusters[ 0 ] ) )
        clusterResults = main.FALSE
        if numClusters == 1:
            clusterResults = main.TRUE
        utilities.assert_equals(
            expect=1,
            actual=numClusters,
            onpass="ONOS shows 1 SCC",
            onfail="ONOS shows " + str( numClusters ) + " SCCs" )

        main.step( "Comparing ONOS topology to MN" )
        devicesResults = main.TRUE
        portsResults = main.TRUE
        linksResults = main.TRUE
        for controller in range( numControllers ):
            controllerStr = str( controller + 1 )
            if devices[ controller ] or "Error" not in devices[ controller ]:
                currentDevicesResult = main.Mininet1.compareSwitches(
                    MNTopo,
                    json.loads( devices[ controller ] ) )
            else:
                currentDevicesResult = main.FALSE
            utilities.assert_equals( expect=main.TRUE,
                                     actual=currentDevicesResult,
                                     onpass="ONOS" + controllerStr +
                                     " Switches view is correct",
                                     onfail="ONOS" + controllerStr +
                                     " Switches view is incorrect" )

            if ports[ controller ] or "Error" not in ports[ controller ]:
                currentPortsResult = main.Mininet1.comparePorts(
                    MNTopo,
                    json.loads( ports[ controller ] ) )
            else:
                currentPortsResult = main.FALSE
            utilities.assert_equals( expect=main.TRUE,
                                     actual=currentPortsResult,
                                     onpass="ONOS" + controllerStr +
                                     " ports view is correct",
                                     onfail="ONOS" + controllerStr +
                                     " ports view is incorrect" )

            if links[ controller ] or "Error" not in links[ controller ]:
                currentLinksResult = main.Mininet1.compareLinks(
                    MNTopo,
                    json.loads( links[ controller ] ) )
            else:
                currentLinksResult = main.FALSE
            utilities.assert_equals( expect=main.TRUE,
                                     actual=currentLinksResult,
                                     onpass="ONOS" + controllerStr +
                                     " links view is correct",
                                     onfail="ONOS" + controllerStr +
                                     " links view is incorrect" )

            devicesResults = devicesResults and currentDevicesResult
            portsResults = portsResults and currentPortsResult
            linksResults = linksResults and currentLinksResult

        topoResult = ( devicesResults and portsResults and linksResults
                       and consistentHostsResult and consistentClustersResult
                       and clusterResults and ipResult )
        utilities.assert_equals( expect=main.TRUE, actual=topoResult,
                                 onpass="Topology Check Test successful",
                                 onfail="Topology Check Test NOT successful" )

    def CASE6( self, main ):
        """
        The Failure case.
        """
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"

        # Reset non-persistent variables
        try:
            iCounterValue = 0
        except NameError:
            main.log.error( "iCounterValue not defined, setting to 0" )
            iCounterValue = 0

        main.case( "Restart entire ONOS cluster" )
        # FIXME: DEBUG
        main.step( "Start Packet Capture MN" )
        main.Mininet2.startTcpdump(
            str( main.params[ 'MNtcpdump' ][ 'folder' ] ) + str( main.TEST )
            + "-MN.pcap",
            intf=main.params[ 'MNtcpdump' ][ 'intf' ],
            port=main.params[ 'MNtcpdump' ][ 'port' ] )
        # FIXME: DEBUG

        main.step( "Killing ONOS nodes" )
        killResults = main.TRUE
        killTime = time.time()
        for node in nodes:
            killed = main.ONOSbench.onosKill( node.ip_address )
            killResults = killResults and killed
        utilities.assert_equals( expect=main.TRUE, actual=killResults,
                                 onpass="ONOS nodes killed",
                                 onfail="ONOS kill unsuccessful" )

        main.step( "Checking if ONOS is up yet" )
        for i in range( 2 ):
            onosIsupResult = main.TRUE
            for node in nodes:
                started = main.ONOSbench.isup( node.ip_address )
                if not started:
                    main.log.error( node.name + " didn't start!" )
                onosIsupResult = onosIsupResult and started
            if onosIsupResult == main.TRUE:
                break
        utilities.assert_equals( expect=main.TRUE, actual=onosIsupResult,
                                 onpass="ONOS restarted",
                                 onfail="ONOS restart NOT successful" )

        main.log.step( "Starting ONOS CLI sessions" )
        cliResults = main.TRUE
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].startOnosCli,
                             name="startOnosCli-" + str( i ),
                             args=[nodes[i].ip_address] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            cliResults = cliResults and t.result
        utilities.assert_equals( expect=main.TRUE, actual=cliResults,
                                 onpass="ONOS cli started",
                                 onfail="ONOS clis did not restart" )

        # Grab the time of restart so we chan check how long the gossip
        # protocol has had time to work
        main.restartTime = time.time() - killTime
        main.log.debug( "Restart time: " + str( main.restartTime ) )

        # FIXME: revisit test plan for election with madan
        # Rerun for election on restarted nodes
        runResults = main.TRUE
        for cli in CLIs:
            run = CLIs[0].electionTestRun()
            if run != main.TRUE:
                main.log.error( "Error running for election on " + cli.name )
            runResults = runResults and run
        utilities.assert_equals( expect=main.TRUE, actual=runResults,
                                 onpass="Reran for election",
                                 onfail="Failed to rerun for election" )

        # TODO: Make this configurable
        time.sleep( 60 )
        main.log.debug( CLIs[0].nodes( jsonFormat=False ) )
        main.log.debug( CLIs[0].leaders( jsonFormat=False ) )
        main.log.debug( CLIs[0].partitions( jsonFormat=False ) )

    def CASE7( self, main ):
        """
        Check state after ONOS failure
        """
        import json
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"
        main.case( "Running ONOS Constant State Tests" )

        main.step( "Check that each switch has a master" )
        # Assert that each device has a master
        rolesNotNull = main.TRUE
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].rolesNotNull,
                             name="rolesNotNull-" + str( i ),
                             args=[ ] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            rolesNotNull = rolesNotNull and t.result
        utilities.assert_equals(
            expect=main.TRUE,
            actual=rolesNotNull,
            onpass="Each device has a master",
            onfail="Some devices don't have a master assigned" )

        main.step( "Read device roles from ONOS" )
        ONOSMastership = []
        mastershipCheck = main.FALSE
        consistentMastership = True
        rolesResults = True
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].roles,
                             name="roles-" + str( i ),
                             args=[] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            ONOSMastership.append( t.result )

        for i in range( numControllers ):
            if not ONOSMastership[i] or "Error" in ONOSMastership[i]:
                main.log.error( "Error in getting ONOS" + str( i + 1 ) +
                                 " roles" )
                main.log.warn(
                    "ONOS" + str( i + 1 ) + " mastership response: " +
                    repr( ONOSMastership[i] ) )
                rolesResults = False
        utilities.assert_equals(
            expect=True,
            actual=rolesResults,
            onpass="No error in reading roles output",
            onfail="Error in reading roles from ONOS" )

        main.step( "Check for consistency in roles from each controller" )
        if all([ i == ONOSMastership[ 0 ] for i in ONOSMastership ] ):
            main.log.info(
                "Switch roles are consistent across all ONOS nodes" )
        else:
            consistentMastership = False
        utilities.assert_equals(
            expect=True,
            actual=consistentMastership,
            onpass="Switch roles are consistent across all ONOS nodes",
            onfail="ONOS nodes have different views of switch roles" )

        if rolesResults and not consistentMastership:
            for i in range( numControllers ):
                main.log.warn(
                    "ONOS" + str( i + 1 ) + " roles: ",
                    json.dumps(
                        json.loads( ONOSMastership[ i ] ),
                        sort_keys=True,
                        indent=4,
                        separators=( ',', ': ' ) ) )
        elif rolesResults and not consistentMastership:
            mastershipCheck = main.TRUE

        '''
        description2 = "Compare switch roles from before failure"
        main.step( description2 )
        try:
            currentJson = json.loads( ONOSMastership[0] )
            oldJson = json.loads( mastershipState )
        except ( ValueError, TypeError ):
            main.log.exception( "Something is wrong with parsing " +
                                "ONOSMastership[0] or mastershipState" )
            main.log.error( "ONOSMastership[0]: " + repr( ONOSMastership[0] ) )
            main.log.error( "mastershipState" + repr( mastershipState ) )
            main.cleanup()
            main.exit()
        mastershipCheck = main.TRUE
        for i in range( 1, 29 ):
            switchDPID = str(
                main.Mininet1.getSwitchDPID( switch="s" + str( i ) ) )
            current = [ switch[ 'master' ] for switch in currentJson
                        if switchDPID in switch[ 'id' ] ]
            old = [ switch[ 'master' ] for switch in oldJson
                    if switchDPID in switch[ 'id' ] ]
            if current == old:
                mastershipCheck = mastershipCheck and main.TRUE
            else:
                main.log.warn( "Mastership of switch %s changed" % switchDPID )
                mastershipCheck = main.FALSE
        utilities.assert_equals(
            expect=main.TRUE,
            actual=mastershipCheck,
            onpass="Mastership of Switches was not changed",
            onfail="Mastership of some switches changed" )
        '''
        # NOTE: we expect mastership to change on controller failure

        main.step( "Get the intents and compare across all nodes" )
        ONOSIntents = []
        intentCheck = main.FALSE
        consistentIntents = True
        intentsResults = True
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].intents,
                             name="intents-" + str( i ),
                             args=[],
                             kwargs={ 'jsonFormat': True } )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            ONOSIntents.append( t.result )

        for i in range( numControllers ):
            if not ONOSIntents[ i ] or "Error" in ONOSIntents[ i ]:
                main.log.error( "Error in getting ONOS" + str( i + 1 ) +
                                 " intents" )
                main.log.warn( "ONOS" + str( i + 1 ) + " intents response: " +
                               repr( ONOSIntents[ i ] ) )
                intentsResults = False
        utilities.assert_equals(
            expect=True,
            actual=intentsResults,
            onpass="No error in reading intents output",
            onfail="Error in reading intents from ONOS" )

        main.step( "Check for consistency in Intents from each controller" )
        if all([ sorted( i ) == sorted( ONOSIntents[ 0 ] ) for i in ONOSIntents ] ):
            main.log.info( "Intents are consistent across all ONOS " +
                             "nodes" )
        else:
            consistentIntents = False

        # Try to make it easy to figure out what is happening
        #
        # Intent      ONOS1      ONOS2    ...
        #  0x01     INSTALLED  INSTALLING
        #  ...        ...         ...
        #  ...        ...         ...
        title = "   ID"
        for n in range( numControllers ):
            title += " " * 10 + "ONOS" + str( n + 1 )
        main.log.warn( title )
        # get all intent keys in the cluster
        keys = []
        for nodeStr in ONOSIntents:
            node = json.loads( nodeStr )
            for intent in node:
                keys.append( intent.get( 'id' ) )
        keys = set( keys )
        for key in keys:
            row = "%-13s" % key
            for nodeStr in ONOSIntents:
                node = json.loads( nodeStr )
                for intent in node:
                    if intent.get( 'id' ) == key:
                        row += "%-15s" % intent.get( 'state' )
            main.log.warn( row )
        # End table view

        utilities.assert_equals(
            expect=True,
            actual=consistentIntents,
            onpass="Intents are consistent across all ONOS nodes",
            onfail="ONOS nodes have different views of intents" )
        intentStates = []
        for node in ONOSIntents:  # Iter through ONOS nodes
            nodeStates = []
            # Iter through intents of a node
            try:
                for intent in json.loads( node ):
                    nodeStates.append( intent[ 'state' ] )
            except ( ValueError, TypeError ):
                main.log.exception( "Error in parsing intents" )
                main.log.error( repr( node ) )
            intentStates.append( nodeStates )
            out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ]
            main.log.info( dict( out ) )

        if intentsResults and not consistentIntents:
            for i in range( numControllers ):
                main.log.warn( "ONOS" + str( i + 1 ) + " intents: " )
                main.log.warn( json.dumps(
                    json.loads( ONOSIntents[ i ] ),
                    sort_keys=True,
                    indent=4,
                    separators=( ',', ': ' ) ) )
        elif intentsResults and consistentIntents:
            intentCheck = main.TRUE

        # NOTE: Store has no durability, so intents are lost across system
        #       restarts
        """
        main.step( "Compare current intents with intents before the failure" )
        # NOTE: this requires case 5 to pass for intentState to be set.
        #      maybe we should stop the test if that fails?
        sameIntents = main.FALSE
        if intentState and intentState == ONOSIntents[ 0 ]:
            sameIntents = main.TRUE
            main.log.info( "Intents are consistent with before failure" )
        # TODO: possibly the states have changed? we may need to figure out
        #       what the acceptable states are
        elif len( intentState ) == len( ONOSIntents[ 0 ] ):
            sameIntents = main.TRUE
            try:
                before = json.loads( intentState )
                after = json.loads( ONOSIntents[ 0 ] )
                for intent in before:
                    if intent not in after:
                        sameIntents = main.FALSE
                        main.log.debug( "Intent is not currently in ONOS " +\
                                        "(at least in the same form):" )
                        main.log.debug( json.dumps( intent ) )
            except ( ValueError, TypeError ):
                main.log.exception( "Exception printing intents" )
                main.log.debug( repr( ONOSIntents[0] ) )
                main.log.debug( repr( intentState ) )
        if sameIntents == main.FALSE:
            try:
                main.log.debug( "ONOS intents before: " )
                main.log.debug( json.dumps( json.loads( intentState ),
                                            sort_keys=True, indent=4,
                                            separators=( ',', ': ' ) ) )
                main.log.debug( "Current ONOS intents: " )
                main.log.debug( json.dumps( json.loads( ONOSIntents[ 0 ] ),
                                            sort_keys=True, indent=4,
                                            separators=( ',', ': ' ) ) )
            except ( ValueError, TypeError ):
                main.log.exception( "Exception printing intents" )
                main.log.debug( repr( ONOSIntents[0] ) )
                main.log.debug( repr( intentState ) )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=sameIntents,
            onpass="Intents are consistent with before failure",
            onfail="The Intents changed during failure" )
        intentCheck = intentCheck and sameIntents
        """
        main.step( "Get the OF Table entries and compare to before " +
                   "component failure" )
        FlowTables = main.TRUE
        flows2 = []
        for i in range( 28 ):
            main.log.info( "Checking flow table on s" + str( i + 1 ) )
            tmpFlows = main.Mininet2.getFlowTable( 1.3, "s" + str( i + 1 ) )
            flows2.append( tmpFlows )
            tempResult = main.Mininet2.flowComp(
                flow1=flows[ i ],
                flow2=tmpFlows )
            FlowTables = FlowTables and tempResult
            if FlowTables == main.FALSE:
                main.log.info( "Differences in flow table for switch: s" +
                               str( i + 1 ) )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=FlowTables,
            onpass="No changes were found in the flow tables",
            onfail="Changes were found in the flow tables" )

        # main.step( "Check the continuous pings to ensure that no packets " +
        #            "were dropped during component failure" )
        main.Mininet2.pingKill( main.params[ 'TESTONUSER' ],
                                main.params[ 'TESTONIP' ] )
        LossInPings = main.FALSE
        # NOTE: checkForLoss returns main.FALSE with 0% packet loss
        for i in range( 8, 18 ):
            main.log.info(
                "Checking for a loss in pings along flow from s" +
                str( i ) )
            LossInPings = main.Mininet2.checkForLoss(
                "/tmp/ping.h" +
                str( i ) ) or LossInPings
        if LossInPings == main.TRUE:
            main.log.info( "Loss in ping detected" )
        elif LossInPings == main.ERROR:
            main.log.info( "There are multiple mininet process running" )
        elif LossInPings == main.FALSE:
            main.log.info( "No Loss in the pings" )
            main.log.info( "No loss of dataplane connectivity" )
        # utilities.assert_equals(
        #     expect=main.FALSE,
        #     actual=LossInPings,
        #     onpass="No Loss of connectivity",
        #     onfail="Loss of dataplane connectivity detected" )

        # NOTE: Since intents are not persisted with IntnentStore,
        #       we expect loss in dataplane connectivity
        LossInPings = main.FALSE

        main.step( "Leadership Election is still functional" )
        # Test of LeadershipElection
        leaderList = []
        leaderResult = main.TRUE
        for cli in CLIs:
            leaderN = cli.electionTestLeader()
            leaderList.append( leaderN )
            if leaderN == main.FALSE:
                # error in response
                main.log.error( "Something is wrong with " +
                                 "electionTestLeader function, check the" +
                                 " error logs" )
                leaderResult = main.FALSE
            elif leaderN is None:
                main.log.error( cli.name +
                                 " shows no leader for the election-app." )
                leaderResult = main.FALSE
        if len( set( leaderList ) ) != 1:
            leaderResult = main.FALSE
            main.log.error(
                "Inconsistent view of leader for the election test app" )
            # TODO: print the list
        utilities.assert_equals(
            expect=main.TRUE,
            actual=leaderResult,
            onpass="Leadership election passed",
            onfail="Something went wrong with Leadership election" )

    def CASE8( self, main ):
        """
        Compare topo
        """
        import sys
        # FIXME add this path to params
        sys.path.append( "/home/admin/sts" )
        # assumes that sts is already in you PYTHONPATH
        from sts.topology.teston_topology import TestONTopology
        import json
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"

        main.case( "Compare ONOS Topology view to Mininet topology" )
        main.caseExplaination = "Compare topology objects between Mininet" +\
                                " and ONOS"
        main.step( "Create TestONTopology object" )
        try:
            ctrls = []
            for node in nodes:
                temp = ( node, node.name, node.ip_address, 6633 )
                ctrls.append( temp )
            MNTopo = TestONTopology( main.Mininet1, ctrls )
        except Exception:
            objResult = main.FALSE
        else:
            objResult = main.TRUE
        utilities.assert_equals( expect=main.TRUE, actual=objResult,
                                 onpass="Created TestONTopology object",
                                 onfail="Exception while creating " +
                                        "TestONTopology object" )

        main.step( "Comparing ONOS topology to MN" )
        devicesResults = main.TRUE
        portsResults = main.TRUE
        linksResults = main.TRUE
        hostsResults = main.TRUE
        topoResult = main.FALSE
        elapsed = 0
        count = 0
        main.step( "Collecting topology information from ONOS" )
        startTime = time.time()
        # Give time for Gossip to work
        while topoResult == main.FALSE and elapsed < 120:
            count += 1
            if count > 1:
                # TODO: Deprecate STS usage
                MNTopo = TestONTopology( main.Mininet1, ctrls )
                time.sleep( 1 )
            cliStart = time.time()
            devices = []
            threads = []
            for i in range( numControllers ):
                t = main.Thread( target=CLIs[i].devices,
                                 name="devices-" + str( i ),
                                 args=[ ] )
                threads.append( t )
                t.start()

            for t in threads:
                t.join()
                devices.append( t.result )
            hosts = []
            ipResult = main.TRUE
            threads = []
            for i in range( numControllers ):
                t = main.Thread( target=CLIs[i].hosts,
                                 name="hosts-" + str( i ),
                                 args=[ ] )
                threads.append( t )
                t.start()

            for t in threads:
                t.join()
                try:
                    hosts.append( json.loads( t.result ) )
                except ( ValueError, TypeError ):
                    main.log.exception( "Error parsing hosts results" )
                    main.log.error( repr( t.result ) )
            for controller in range( 0, len( hosts ) ):
                controllerStr = str( controller + 1 )
                for host in hosts[ controller ]:
                    if host is None or host.get( 'ipAddresses', [] ) == []:
                        main.log.error(
                            "DEBUG:Error with host ipAddresses on controller" +
                            controllerStr + ": " + str( host ) )
                        ipResult = main.FALSE
            ports = []
            threads = []
            for i in range( numControllers ):
                t = main.Thread( target=CLIs[i].ports,
                                 name="ports-" + str( i ),
                                 args=[ ] )
                threads.append( t )
                t.start()

            for t in threads:
                t.join()
                ports.append( t.result )
                try:
                    # FIXME: DEBUG
                    main.log.debug( json.dumps( json.loads( t.result ),
                                                sort_keys=True,
                                                indent=4,
                                                separators=( ',', ': ' ) ) )
                except:
                    main.log.debug( repr( t.result ) )
            links = []
            threads = []
            for i in range( numControllers ):
                t = main.Thread( target=CLIs[i].links,
                                 name="links-" + str( i ),
                                 args=[ ] )
                threads.append( t )
                t.start()

            for t in threads:
                t.join()
                links.append( t.result )
            clusters = []
            threads = []
            for i in range( numControllers ):
                t = main.Thread( target=CLIs[i].clusters,
                                 name="clusters-" + str( i ),
                                 args=[ ] )
                threads.append( t )
                t.start()

            for t in threads:
                t.join()
                clusters.append( t.result )

            elapsed = time.time() - startTime
            cliTime = time.time() - cliStart
            print "Elapsed time: " + str( elapsed )
            print "CLI time: " + str( cliTime )

            for controller in range( numControllers ):
                controllerStr = str( controller + 1 )
                if devices[ controller ] or "Error" not in devices[
                        controller ]:
                    currentDevicesResult = main.Mininet1.compareSwitches(
                        MNTopo,
                        json.loads( devices[ controller ] ) )
                else:
                    currentDevicesResult = main.FALSE
                utilities.assert_equals( expect=main.TRUE,
                                         actual=currentDevicesResult,
                                         onpass="ONOS" + controllerStr +
                                         " Switches view is correct",
                                         onfail="ONOS" + controllerStr +
                                         " Switches view is incorrect" )

                if ports[ controller ] or "Error" not in ports[ controller ]:
                    currentPortsResult = main.Mininet1.comparePorts(
                        MNTopo,
                        json.loads( ports[ controller ] ) )
                else:
                    currentPortsResult = main.FALSE
                utilities.assert_equals( expect=main.TRUE,
                                         actual=currentPortsResult,
                                         onpass="ONOS" + controllerStr +
                                         " ports view is correct",
                                         onfail="ONOS" + controllerStr +
                                         " ports view is incorrect" )

                if links[ controller ] or "Error" not in links[ controller ]:
                    currentLinksResult = main.Mininet1.compareLinks(
                        MNTopo,
                        json.loads( links[ controller ] ) )
                else:
                    currentLinksResult = main.FALSE
                utilities.assert_equals( expect=main.TRUE,
                                         actual=currentLinksResult,
                                         onpass="ONOS" + controllerStr +
                                         " links view is correct",
                                         onfail="ONOS" + controllerStr +
                                         " links view is incorrect" )

                if hosts[ controller ] or "Error" not in hosts[ controller ]:
                    currentHostsResult = main.Mininet1.compareHosts(
                        MNTopo, hosts[ controller ] )
                else:
                    currentHostsResult = main.FALSE
                utilities.assert_equals( expect=main.TRUE,
                                         actual=currentHostsResult,
                                         onpass="ONOS" + controllerStr +
                                         " hosts exist in Mininet",
                                         onfail="ONOS" + controllerStr +
                                         " hosts don't match Mininet" )

                devicesResults = devicesResults and currentDevicesResult
                portsResults = portsResults and currentPortsResult
                linksResults = linksResults and currentLinksResult
                hostsResults = hostsResults and currentHostsResult

            # Compare json objects for hosts and dataplane clusters

            # hosts
            main.step( "Hosts view is consistent across all ONOS nodes" )
            consistentHostsResult = main.TRUE
            for controller in range( len( hosts ) ):
                controllerStr = str( controller + 1 )
                if "Error" not in hosts[ controller ]:
                    if hosts[ controller ] == hosts[ 0 ]:
                        continue
                    else:  # hosts not consistent
                        main.log.error( "hosts from ONOS" + controllerStr +
                                         " is inconsistent with ONOS1" )
                        main.log.warn( repr( hosts[ controller ] ) )
                        consistentHostsResult = main.FALSE

                else:
                    main.log.error( "Error in getting ONOS hosts from ONOS" +
                                     controllerStr )
                    consistentHostsResult = main.FALSE
                    main.log.warn( "ONOS" + controllerStr +
                                   " hosts response: " +
                                   repr( hosts[ controller ] ) )
            utilities.assert_equals(
                expect=main.TRUE,
                actual=consistentHostsResult,
                onpass="Hosts view is consistent across all ONOS nodes",
                onfail="ONOS nodes have different views of hosts" )

            # Strongly connected clusters of devices
            main.step( "Clusters view is consistent across all ONOS nodes" )
            consistentClustersResult = main.TRUE
            for controller in range( len( clusters ) ):
                controllerStr = str( controller + 1 )
                if "Error" not in clusters[ controller ]:
                    if clusters[ controller ] == clusters[ 0 ]:
                        continue
                    else:  # clusters not consistent
                        main.log.error( "clusters from ONOS" +
                                         controllerStr +
                                         " is inconsistent with ONOS1" )
                        consistentClustersResult = main.FALSE

                else:
                    main.log.error( "Error in getting dataplane clusters " +
                                     "from ONOS" + controllerStr )
                    consistentClustersResult = main.FALSE
                    main.log.warn( "ONOS" + controllerStr +
                                   " clusters response: " +
                                   repr( clusters[ controller ] ) )
            utilities.assert_equals(
                expect=main.TRUE,
                actual=consistentClustersResult,
                onpass="Clusters view is consistent across all ONOS nodes",
                onfail="ONOS nodes have different views of clusters" )
            # there should always only be one cluster
            main.step( "Topology view is correct and consistent across all " +
                       "ONOS nodes" )
            try:
                numClusters = len( json.loads( clusters[ 0 ] ) )
            except ( ValueError, TypeError ):
                main.log.exception( "Error parsing clusters[0]: " +
                                    repr( clusters[0] ) )
            clusterResults = main.FALSE
            if numClusters == 1:
                clusterResults = main.TRUE
            utilities.assert_equals(
                expect=1,
                actual=numClusters,
                onpass="ONOS shows 1 SCC",
                onfail="ONOS shows " + str( numClusters ) + " SCCs" )

            topoResult = ( devicesResults and portsResults and linksResults
                           and hostsResults and consistentHostsResult
                           and consistentClustersResult and clusterResults
                           and ipResult )

        topoResult = topoResult and int( count <= 2 )
        note = "note it takes about " + str( int( cliTime ) ) + \
            " seconds for the test to make all the cli calls to fetch " +\
            "the topology from each ONOS instance"
        main.log.info(
            "Very crass estimate for topology discovery/convergence( " +
            str( note ) + " ): " + str( elapsed ) + " seconds, " +
            str( count ) + " tries" )
        utilities.assert_equals( expect=main.TRUE, actual=topoResult,
                                 onpass="Topology Check Test successful",
                                 onfail="Topology Check Test NOT successful" )

        # FIXME: move this to an ONOS state case
        main.step( "Checking ONOS nodes" )
        nodesOutput = []
        nodeResults = main.TRUE
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].nodes,
                             name="nodes-" + str( i ),
                             args=[ ] )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            nodesOutput.append( t.result )
        ips = [ node.ip_address for node in nodes ]
        for i in nodesOutput:
            try:
                current = json.loads( i )
                for node in current:
                    currentResult = main.FALSE
                    if node['ip'] in ips:  # node in nodes() output is in cell
                        if node['state'] == 'ACTIVE':
                            currentResult = main.TRUE
                        else:
                            main.log.error( "Error in ONOS node availability" )
                            main.log.error(
                                    json.dumps( current,
                                                sort_keys=True,
                                                indent=4,
                                                separators=( ',', ': ' ) ) )
                            break
                    nodeResults = nodeResults and currentResult
            except ( ValueError, TypeError ):
                main.log.error( "Error parsing nodes output" )
                main.log.warn( repr( i ) )
        utilities.assert_equals( expect=main.TRUE, actual=nodeResults,
                                 onpass="Nodes check successful",
                                 onfail="Nodes check NOT successful" )

    def CASE9( self, main ):
        """
        Link s3-s28 down
        """
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"
        # NOTE: You should probably run a topology check after this

        linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] )

        description = "Turn off a link to ensure that Link Discovery " +\
                      "is working properly"
        main.case( description )

        main.step( "Kill Link between s3 and s28" )
        LinkDown = main.Mininet1.link( END1="s3", END2="s28", OPTION="down" )
        main.log.info( "Waiting " + str( linkSleep ) +
                       " seconds for link down to be discovered" )
        time.sleep( linkSleep )
        utilities.assert_equals( expect=main.TRUE, actual=LinkDown,
                                 onpass="Link down successful",
                                 onfail="Failed to bring link down" )
        # TODO do some sort of check here

    def CASE10( self, main ):
        """
        Link s3-s28 up
        """
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"
        # NOTE: You should probably run a topology check after this

        linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] )

        description = "Restore a link to ensure that Link Discovery is " + \
                      "working properly"
        main.case( description )

        main.step( "Bring link between s3 and s28 back up" )
        LinkUp = main.Mininet1.link( END1="s3", END2="s28", OPTION="up" )
        main.log.info( "Waiting " + str( linkSleep ) +
                       " seconds for link up to be discovered" )
        time.sleep( linkSleep )
        utilities.assert_equals( expect=main.TRUE, actual=LinkUp,
                                 onpass="Link up successful",
                                 onfail="Failed to bring link up" )
        # TODO do some sort of check here

    def CASE11( self, main ):
        """
        Switch Down
        """
        # NOTE: You should probably run a topology check after this
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"

        switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] )

        description = "Killing a switch to ensure it is discovered correctly"
        main.case( description )
        switch = main.params[ 'kill' ][ 'switch' ]
        switchDPID = main.params[ 'kill' ][ 'dpid' ]

        # TODO: Make this switch parameterizable
        main.step( "Kill " + switch )
        main.log.info( "Deleting " + switch )
        main.Mininet1.delSwitch( switch )
        main.log.info( "Waiting " + str( switchSleep ) +
                       " seconds for switch down to be discovered" )
        time.sleep( switchSleep )
        device = main.ONOScli1.getDevice( dpid=switchDPID )
        # Peek at the deleted switch
        main.log.warn( str( device ) )
        result = main.FALSE
        if device and device[ 'available' ] is False:
            result = main.TRUE
        utilities.assert_equals( expect=main.TRUE, actual=result,
                                 onpass="Kill switch successful",
                                 onfail="Failed to kill switch?" )

    def CASE12( self, main ):
        """
        Switch Up
        """
        # NOTE: You should probably run a topology check after this
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"
        assert ONOS1Port, "ONOS1Port not defined"
        assert ONOS2Port, "ONOS2Port not defined"
        assert ONOS3Port, "ONOS3Port not defined"
        assert ONOS4Port, "ONOS4Port not defined"
        assert ONOS5Port, "ONOS5Port not defined"
        assert ONOS6Port, "ONOS6Port not defined"
        assert ONOS7Port, "ONOS7Port not defined"

        switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] )
        switch = main.params[ 'kill' ][ 'switch' ]
        switchDPID = main.params[ 'kill' ][ 'dpid' ]
        links = main.params[ 'kill' ][ 'links' ].split()
        description = "Adding a switch to ensure it is discovered correctly"
        main.case( description )

        main.step( "Add back " + switch )
        main.Mininet1.addSwitch( switch, dpid=switchDPID )
        for peer in links:
            main.Mininet1.addLink( switch, peer )
        main.Mininet1.assignSwController( sw=switch.split( 's' )[ 1 ],
                                          count=numControllers,
                                          ip1=nodes[ 0 ].ip_address,
                                          port1=ONOS1Port,
                                          ip2=nodes[ 1 ].ip_address,
                                          port2=ONOS2Port,
                                          ip3=nodes[ 2 ].ip_address,
                                          port3=ONOS3Port,
                                          ip4=nodes[ 3 ].ip_address,
                                          port4=ONOS4Port,
                                          ip5=nodes[ 4 ].ip_address,
                                          port5=ONOS5Port,
                                          ip6=nodes[ 5 ].ip_address,
                                          port6=ONOS6Port,
                                          ip7=nodes[ 6 ].ip_address,
                                          port7=ONOS7Port )
        main.log.info( "Waiting " + str( switchSleep ) +
                       " seconds for switch up to be discovered" )
        time.sleep( switchSleep )
        device = main.ONOScli1.getDevice( dpid=switchDPID )
        # Peek at the deleted switch
        main.log.warn( str( device ) )
        result = main.FALSE
        if device and device[ 'available' ]:
            result = main.TRUE
        utilities.assert_equals( expect=main.TRUE, actual=result,
                                 onpass="add switch successful",
                                 onfail="Failed to add switch?" )

    def CASE13( self, main ):
        """
        Clean up
        """
        import os
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"

        # printing colors to terminal
        colors = { 'cyan': '\033[96m', 'purple': '\033[95m',
                   'blue': '\033[94m', 'green': '\033[92m',
                   'yellow': '\033[93m', 'red': '\033[91m', 'end': '\033[0m' }
        main.case( "Test Cleanup" )
        main.step( "Killing tcpdumps" )
        main.Mininet2.stopTcpdump()

        main.step( "Copying MN pcap and ONOS log files to test station" )
        testname = main.TEST
        teststationUser = main.params[ 'TESTONUSER' ]
        teststationIP = main.params[ 'TESTONIP' ]
        # NOTE: MN Pcap file is being saved to ~/packet_captures
        #       scp this file as MN and TestON aren't necessarily the same vm
        # FIXME: scp
        # mn files
        # TODO: Load these from params
        # NOTE: must end in /
        logFolder = "/opt/onos/log/"
        logFiles = [ "karaf.log", "karaf.log.1" ]
        # NOTE: must end in /
        dstDir = "~/packet_captures/"
        for f in logFiles:
            for node in nodes:
                main.ONOSbench.handle.sendline( "scp sdn@" + node.ip_address +
                                                ":" + logFolder + f + " " +
                                                teststationUser + "@" +
                                                teststationIP + ":" +
                                                dstDir + str( testname ) +
                                                "-" + node.name + "-" + f )
                main.ONOSbench.handle.expect( "\$" )

        # std*.log's
        # NOTE: must end in /
        logFolder = "/opt/onos/var/"
        logFiles = [ "stderr.log", "stdout.log" ]
        # NOTE: must end in /
        dstDir = "~/packet_captures/"
        for f in logFiles:
            for node in nodes:
                main.ONOSbench.handle.sendline( "scp sdn@" + node.ip_address +
                                                ":" + logFolder + f + " " +
                                                teststationUser + "@" +
                                                teststationIP + ":" +
                                                dstDir + str( testname ) +
                                                "-" + node.name + "-" + f )
                main.ONOSbench.handle.expect( "\$" )
        # sleep so scp can finish
        time.sleep( 10 )

        main.step( "Stopping Mininet" )
        mnResult = main.Mininet1.stopNet()
        utilities.assert_equals( expect=main.TRUE, actual=mnResult,
                                 onpass="Mininet stopped",
                                 onfail="MN cleanup NOT successful" )

        main.step( "Checking ONOS Logs for errors" )
        for node in nodes:
            print colors[ 'purple' ] + "Checking logs for errors on " + \
                node.name + ":" + colors[ 'end' ]
            print main.ONOSbench.checkLogs( node.ip_address, restart=True )

        main.step( "Packing and rotating pcap archives" )
        os.system( "~/TestON/dependencies/rotate.sh " + str( testname ) )

        try:
            timerLog = open( main.logdir + "/Timers.csv", 'w')
            # Overwrite with empty line and close
            labels = "Gossip Intents, Restart"
            data = str( gossipTime ) + ", " + str( main.restartTime )
            timerLog.write( labels + "\n" + data )
            timerLog.close()
        except NameError, e:
            main.log.exception(e)

    def CASE14( self, main ):
        """
        start election app on all onos nodes
        """
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"

        main.case("Start Leadership Election app")
        main.step( "Install leadership election app" )
        appResult = main.ONOScli1.activateApp( "org.onosproject.election" )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=appResult,
            onpass="Election app installed",
            onfail="Something went wrong with installing Leadership election" )

        main.step( "Run for election on each node" )
        leaderResult = main.TRUE
        leaders = []
        for cli in CLIs:
            cli.electionTestRun()
        for cli in CLIs:
            leader = cli.electionTestLeader()
            if leader is None or leader == main.FALSE:
                main.log.error( cli.name + ": Leader for the election app " +
                                 "should be an ONOS node, instead got '" +
                                 str( leader ) + "'" )
                leaderResult = main.FALSE
            leaders.append( leader )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=leaderResult,
            onpass="Successfully ran for leadership",
            onfail="Failed to run for leadership" )

        main.step( "Check that each node shows the same leader" )
        sameLeader = main.TRUE
        if len( set( leaders ) ) != 1:
            sameLeader = main.FALSE
            main.log.error( "Results of electionTestLeader is order of CLIs:" +
                            str( leaders ) )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=sameLeader,
            onpass="Leadership is consistent for the election topic",
            onfail="Nodes have different leaders" )

    def CASE15( self, main ):
        """
        Check that Leadership Election is still functional
        """
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"

        leaderResult = main.TRUE
        description = "Check that Leadership Election is still functional"
        main.case( description )
        # NOTE: Need to re-run since being a canidate is not persistant
        main.step( "Run for election on each node" )
        leaderResult = main.TRUE
        leaders = []
        for cli in CLIs:
            cli.electionTestRun()
        for cli in CLIs:
            leader = cli.electionTestLeader()
            if leader is None or leader == main.FALSE:
                main.log.error( cli.name + ": Leader for the election app " +
                                 "should be an ONOS node, instead got '" +
                                 str( leader ) + "'" )
                leaderResult = main.FALSE
            leaders.append( leader )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=leaderResult,
            onpass="Successfully ran for leadership",
            onfail="Failed to run for leadership" )

        main.step( "Check that each node shows the same leader" )
        sameLeader = main.TRUE
        if len( set( leaders ) ) != 1:
            sameLeader = main.FALSE
            main.log.error( "Results of electionTestLeader is order of CLIs:" +
                            str( leaders ) )
        utilities.assert_equals(
            expect=main.TRUE,
            actual=sameLeader,
            onpass="Leadership is consistent for the election topic",
            onfail="Nodes have different leaders" )

        main.step( "Find current leader and withdraw" )
        leader = main.ONOScli1.electionTestLeader()
        # do some sanity checking on leader before using it
        withdrawResult = main.FALSE
        if leader is None or leader == main.FALSE:
            main.log.error(
                "Leader for the election app should be an ONOS node," +
                "instead got '" + str( leader ) + "'" )
            leaderResult = main.FALSE
            oldLeader = None
        for i in range( len( CLIs ) ):
            if leader == nodes[ i ].ip_address:
                oldLeader = CLIs[ i ]
                break
        else:  # FOR/ELSE statement
            main.log.error( "Leader election, could not find current leader" )
        if oldLeader:
            withdrawResult = oldLeader.electionTestWithdraw()
        utilities.assert_equals(
            expect=main.TRUE,
            actual=withdrawResult,
            onpass="Node was withdrawn from election",
            onfail="Node was not withdrawn from election" )

        main.step( "Make sure new leader is elected" )
        # FIXME: use threads
        leaderList = []
        for cli in CLIs:
            leaderN = cli.electionTestLeader()
            leaderList.append( leaderN )
            if leaderN == leader:
                main.log.error(  cli.name + " still sees " + str( leader ) +
                                  " as leader after they withdrew" )
                leaderResult = main.FALSE
            elif leaderN == main.FALSE:
                # error in  response
                # TODO: add check for "Command not found:" in the driver, this
                #       means the app isn't loaded
                main.log.error( "Something is wrong with " +
                                 "electionTestLeader function, " +
                                 "check the error logs" )
                leaderResult = main.FALSE
            elif leaderN is None:
                # node may not have recieved the event yet
                time.sleep(7)
                leaderN = cli.electionTestLeader()
                leaderList.pop()
                leaderList.append( leaderN )
        consistentLeader = main.FALSE
        if len( set( leaderList ) ) == 1:
            main.log.info( "Each Election-app sees '" +
                           str( leaderList[ 0 ] ) +
                           "' as the leader" )
            consistentLeader = main.TRUE
        else:
            main.log.error(
                "Inconsistent responses for leader of Election-app:" )
            for n in range( len( leaderList ) ):
                main.log.error( "ONOS" + str( n + 1 ) + " response: " +
                                 str( leaderList[ n ] ) )
        leaderResult = leaderResult and consistentLeader
        utilities.assert_equals(
            expect=main.TRUE,
            actual=leaderResult,
            onpass="Leadership election passed",
            onfail="Something went wrong with Leadership election" )

        main.step( "Run for election on old leader( just so everyone " +
                   "is in the hat )" )
        if oldLeader:
            runResult = oldLeader.electionTestRun()
        else:
            runResult = main.FALSE
        utilities.assert_equals(
            expect=main.TRUE,
            actual=runResult,
            onpass="App re-ran for election",
            onfail="App failed to run for election" )

        main.step( "Leader did not change when old leader re-ran" )
        afterRun = main.ONOScli1.electionTestLeader()
        # verify leader didn't just change
        if afterRun == leaderList[ 0 ]:
            afterResult = main.TRUE
        else:
            afterResult = main.FALSE

        utilities.assert_equals(
            expect=main.TRUE,
            actual=afterResult,
            onpass="Old leader successfully re-ran for election",
            onfail="Something went wrong with Leadership election after " +
                   "the old leader re-ran for election" )

    def CASE16( self, main ):
        """
        Install Distributed Primitives app
        """
        import time
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"

        # Variables for the distributed primitives tests
        global pCounterName
        global iCounterName
        global pCounterValue
        global iCounterValue
        global onosSet
        global onosSetName
        pCounterName = "TestON-Partitions"
        iCounterName = "TestON-inMemory"
        pCounterValue = 0
        iCounterValue = 0
        onosSet = set([])
        onosSetName = "TestON-set"

        description = "Install Primitives app"
        main.case( description )
        main.step( "Install Primitives app" )
        appName = "org.onosproject.distributedprimitives"
        appResults = CLIs[0].activateApp( appName )
        utilities.assert_equals( expect=main.TRUE,
                                 actual=appResults,
                                 onpass="Primitives app activated",
                                 onfail="Primitives app not activated" )
        time.sleep( 5 )  # To allow all nodes to activate

    def CASE17( self, main ):
        """
        Check for basic functionality with distributed primitives
        """
        # Make sure variables are defined/set
        assert numControllers, "numControllers not defined"
        assert main, "main not defined"
        assert utilities.assert_equals, "utilities.assert_equals not defined"
        assert CLIs, "CLIs not defined"
        assert nodes, "nodes not defined"
        assert pCounterName, "pCounterName not defined"
        assert iCounterName, "iCounterName not defined"
        assert onosSetName, "onosSetName not defined"
        # NOTE: assert fails if value is 0/None/Empty/False
        try:
            pCounterValue
        except NameError:
            main.log.error( "pCounterValue not defined, setting to 0" )
            pCounterValue = 0
        try:
            iCounterValue
        except NameError:
            main.log.error( "iCounterValue not defined, setting to 0" )
            iCounterValue = 0
        try:
            onosSet
        except NameError:
            main.log.error( "onosSet not defined, setting to empty Set" )
            onosSet = set([])
        # Variables for the distributed primitives tests. These are local only
        addValue = "a"
        addAllValue = "a b c d e f"
        retainValue = "c d e f"

        description = "Check for basic functionality with distributed " +\
                      "primitives"
        main.case( description )
        main.caseExplaination = "Test the methods of the distributed primitives (counters and sets) throught the cli"
        # DISTRIBUTED ATOMIC COUNTERS
        main.step( "Increment and get a default counter on each node" )
        pCounters = []
        threads = []
        addedPValues = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].counterTestIncrement,
                             name="counterIncrement-" + str( i ),
                             args=[ pCounterName ] )
            pCounterValue += 1
            addedPValues.append( pCounterValue )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            pCounters.append( t.result )
        # Check that counter incremented numController times
        pCounterResults = True
        for i in addedPValues:
            tmpResult = i in pCounters
            pCounterResults = pCounterResults and tmpResult
            if not tmpResult:
                main.log.error( str( i ) + " is not in partitioned "
                                "counter incremented results" )
        utilities.assert_equals( expect=True,
                                 actual=pCounterResults,
                                 onpass="Default counter incremented",
                                 onfail="Error incrementing default" +
                                        " counter" )

        main.step( "Increment and get an in memory counter on each node" )
        iCounters = []
        addedIValues = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].counterTestIncrement,
                             name="icounterIncrement-" + str( i ),
                             args=[ iCounterName ],
                             kwargs={ "inMemory": True } )
            iCounterValue += 1
            addedIValues.append( iCounterValue )
            threads.append( t )
            t.start()

        for t in threads:
            t.join()
            iCounters.append( t.result )
        # Check that counter incremented numController times
        iCounterResults = True
        for i in addedIValues:
            tmpResult = i in iCounters
            iCounterResults = iCounterResults and tmpResult
            if not tmpResult:
                main.log.error( str( i ) + " is not in the in-memory "
                                "counter incremented results" )
        utilities.assert_equals( expect=True,
                                 actual=iCounterResults,
                                 onpass="In memory counter incremented",
                                 onfail="Error incrementing in memory" +
                                        " counter" )

        main.step( "Check counters are consistant across nodes" )
        onosCounters = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].counters,
                             name="counters-" + str( i ) )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            onosCounters.append( t.result )
        tmp = [ i == onosCounters[ 0 ] for i in onosCounters ]
        if all( tmp ):
            main.log.info( "Counters are consistent across all nodes" )
            consistentCounterResults = main.TRUE
        else:
            main.log.error( "Counters are not consistent across all nodes" )
            consistentCounterResults = main.FALSE
        utilities.assert_equals( expect=main.TRUE,
                                 actual=consistentCounterResults,
                                 onpass="ONOS counters are consistent " +
                                        "across nodes",
                                 onfail="ONOS Counters are inconsistent " +
                                        "across nodes" )

        main.step( "Counters we added have the correct values" )
        correctResults = main.TRUE
        for i in range( numControllers ):
            current = json.loads( onosCounters[i] )
            pValue = None
            iValue = None
            try:
                for database in current:
                    partitioned = database.get( 'partitionedDatabaseCounters' )
                    if partitioned:
                        for value in partitioned:
                            if value.get( 'name' ) == pCounterName:
                                pValue = value.get( 'value' )
                                break
                    inMemory = database.get( 'inMemoryDatabaseCounters' )
                    if inMemory:
                        for value in inMemory:
                            if value.get( 'name' ) == iCounterName:
                                iValue = value.get( 'value' )
                                break
            except AttributeError, e:
                main.log.error( "ONOS" + str( i + 1 ) + " counters result " +
                                "is not as expected" )
                correctResults = main.FALSE
            if pValue == pCounterValue:
                main.log.info( "Partitioned counter value is correct" )
            else:
                main.log.error( "Partitioned counter value is incorrect," +
                                " expected value: " + str( pCounterValue )
                                + " current value: " + str( pValue ) )
                correctResults = main.FALSE
            if iValue == iCounterValue:
                main.log.info( "In memory counter value is correct" )
            else:
                main.log.error( "In memory counter value is incorrect, " +
                                "expected value: " + str( iCounterValue ) +
                                " current value: " + str( iValue ) )
                correctResults = main.FALSE
        utilities.assert_equals( expect=main.TRUE,
                                 actual=correctResults,
                                 onpass="Added counters are correct",
                                 onfail="Added counters are incorrect" )
        # DISTRIBUTED SETS
        main.step( "Distributed Set get" )
        size = len( onosSet )
        getResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestGet,
                             name="setTestGet-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            getResponses.append( t.result )

        getResults = main.TRUE
        for i in range( numControllers ):
            if isinstance( getResponses[ i ], list):
                current = set( getResponses[ i ] )
                if len( current ) == len( getResponses[ i ] ):
                    # no repeats
                    if onosSet != current:
                        main.log.error( "ONOS" + str( i + 1 ) +
                                        " has incorrect view" +
                                        " of set " + onosSetName + ":\n" +
                                        str( getResponses[ i ] ) )
                        main.log.debug( "Expected: " + str( onosSet ) )
                        main.log.debug( "Actual: " + str( current ) )
                        getResults = main.FALSE
                else:
                    # error, set is not a set
                    main.log.error( "ONOS" + str( i + 1 ) +
                                    " has repeat elements in" +
                                    " set " + onosSetName + ":\n" +
                                    str( getResponses[ i ] ) )
                    getResults = main.FALSE
            elif getResponses[ i ] == main.ERROR:
                getResults = main.FALSE
        utilities.assert_equals( expect=main.TRUE,
                                 actual=getResults,
                                 onpass="Set elements are correct",
                                 onfail="Set elements are incorrect" )

        main.step( "Distributed Set size" )
        sizeResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestSize,
                             name="setTestSize-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            sizeResponses.append( t.result )

        sizeResults = main.TRUE
        for i in range( numControllers ):
            if size != sizeResponses[ i ]:
                sizeResults = main.FALSE
                main.log.error( "ONOS" + str( i + 1 ) +
                                " expected a size of " + str( size ) +
                                " for set " + onosSetName +
                                " but got " + str( sizeResponses[ i ] ) )
        utilities.assert_equals( expect=main.TRUE,
                                 actual=sizeResults,
                                 onpass="Set sizes are correct",
                                 onfail="Set sizes are incorrect" )

        main.step( "Distributed Set add()" )
        onosSet.add( addValue )
        addResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestAdd,
                             name="setTestAdd-" + str( i ),
                             args=[ onosSetName, addValue ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            addResponses.append( t.result )

        # main.TRUE = successfully changed the set
        # main.FALSE = action resulted in no change in set
        # main.ERROR - Some error in executing the function
        addResults = main.TRUE
        for i in range( numControllers ):
            if addResponses[ i ] == main.TRUE:
                # All is well
                pass
            elif addResponses[ i ] == main.FALSE:
                # Already in set, probably fine
                pass
            elif addResponses[ i ] == main.ERROR:
                # Error in execution
                addResults = main.FALSE
            else:
                # unexpected result
                addResults = main.FALSE
        if addResults != main.TRUE:
            main.log.error( "Error executing set add" )

        # Check if set is still correct
        size = len( onosSet )
        getResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestGet,
                             name="setTestGet-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            getResponses.append( t.result )
        getResults = main.TRUE
        for i in range( numControllers ):
            if isinstance( getResponses[ i ], list):
                current = set( getResponses[ i ] )
                if len( current ) == len( getResponses[ i ] ):
                    # no repeats
                    if onosSet != current:
                        main.log.error( "ONOS" + str( i + 1 ) +
                                        " has incorrect view" +
                                        " of set " + onosSetName + ":\n" +
                                        str( getResponses[ i ] ) )
                        main.log.debug( "Expected: " + str( onosSet ) )
                        main.log.debug( "Actual: " + str( current ) )
                        getResults = main.FALSE
                else:
                    # error, set is not a set
                    main.log.error( "ONOS" + str( i + 1 ) +
                                    " has repeat elements in" +
                                    " set " + onosSetName + ":\n" +
                                    str( getResponses[ i ] ) )
                    getResults = main.FALSE
            elif getResponses[ i ] == main.ERROR:
                getResults = main.FALSE
        sizeResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestSize,
                             name="setTestSize-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            sizeResponses.append( t.result )
        sizeResults = main.TRUE
        for i in range( numControllers ):
            if size != sizeResponses[ i ]:
                sizeResults = main.FALSE
                main.log.error( "ONOS" + str( i + 1 ) +
                                " expected a size of " + str( size ) +
                                " for set " + onosSetName +
                                " but got " + str( sizeResponses[ i ] ) )
        addResults = addResults and getResults and sizeResults
        utilities.assert_equals( expect=main.TRUE,
                                 actual=addResults,
                                 onpass="Set add correct",
                                 onfail="Set add was incorrect" )

        main.step( "Distributed Set addAll()" )
        onosSet.update( addAllValue.split() )
        addResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestAdd,
                             name="setTestAddAll-" + str( i ),
                             args=[ onosSetName, addAllValue ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            addResponses.append( t.result )

        # main.TRUE = successfully changed the set
        # main.FALSE = action resulted in no change in set
        # main.ERROR - Some error in executing the function
        addAllResults = main.TRUE
        for i in range( numControllers ):
            if addResponses[ i ] == main.TRUE:
                # All is well
                pass
            elif addResponses[ i ] == main.FALSE:
                # Already in set, probably fine
                pass
            elif addResponses[ i ] == main.ERROR:
                # Error in execution
                addAllResults = main.FALSE
            else:
                # unexpected result
                addAllResults = main.FALSE
        if addAllResults != main.TRUE:
            main.log.error( "Error executing set addAll" )

        # Check if set is still correct
        size = len( onosSet )
        getResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestGet,
                             name="setTestGet-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            getResponses.append( t.result )
        getResults = main.TRUE
        for i in range( numControllers ):
            if isinstance( getResponses[ i ], list):
                current = set( getResponses[ i ] )
                if len( current ) == len( getResponses[ i ] ):
                    # no repeats
                    if onosSet != current:
                        main.log.error( "ONOS" + str( i + 1 ) +
                                        " has incorrect view" +
                                        " of set " + onosSetName + ":\n" +
                                        str( getResponses[ i ] ) )
                        main.log.debug( "Expected: " + str( onosSet ) )
                        main.log.debug( "Actual: " + str( current ) )
                        getResults = main.FALSE
                else:
                    # error, set is not a set
                    main.log.error( "ONOS" + str( i + 1 ) +
                                    " has repeat elements in" +
                                    " set " + onosSetName + ":\n" +
                                    str( getResponses[ i ] ) )
                    getResults = main.FALSE
            elif getResponses[ i ] == main.ERROR:
                getResults = main.FALSE
        sizeResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestSize,
                             name="setTestSize-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            sizeResponses.append( t.result )
        sizeResults = main.TRUE
        for i in range( numControllers ):
            if size != sizeResponses[ i ]:
                sizeResults = main.FALSE
                main.log.error( "ONOS" + str( i + 1 ) +
                                " expected a size of " + str( size ) +
                                " for set " + onosSetName +
                                " but got " + str( sizeResponses[ i ] ) )
        addAllResults = addAllResults and getResults and sizeResults
        utilities.assert_equals( expect=main.TRUE,
                                 actual=addAllResults,
                                 onpass="Set addAll correct",
                                 onfail="Set addAll was incorrect" )

        main.step( "Distributed Set contains()" )
        containsResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestGet,
                             name="setContains-" + str( i ),
                             args=[ onosSetName ],
                             kwargs={ "values": addValue } )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            # NOTE: This is the tuple
            containsResponses.append( t.result )

        containsResults = main.TRUE
        for i in range( numControllers ):
            if containsResponses[ i ] == main.ERROR:
                containsResults = main.FALSE
            else:
                containsResults = containsResults and\
                                  containsResponses[ i ][ 1 ]
        utilities.assert_equals( expect=main.TRUE,
                                 actual=containsResults,
                                 onpass="Set contains is functional",
                                 onfail="Set contains failed" )

        main.step( "Distributed Set containsAll()" )
        containsAllResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestGet,
                             name="setContainsAll-" + str( i ),
                             args=[ onosSetName ],
                             kwargs={ "values": addAllValue } )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            # NOTE: This is the tuple
            containsAllResponses.append( t.result )

        containsAllResults = main.TRUE
        for i in range( numControllers ):
            if containsResponses[ i ] == main.ERROR:
                containsResults = main.FALSE
            else:
                containsResults = containsResults and\
                                  containsResponses[ i ][ 1 ]
        utilities.assert_equals( expect=main.TRUE,
                                 actual=containsAllResults,
                                 onpass="Set containsAll is functional",
                                 onfail="Set containsAll failed" )

        main.step( "Distributed Set remove()" )
        onosSet.remove( addValue )
        removeResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestRemove,
                             name="setTestRemove-" + str( i ),
                             args=[ onosSetName, addValue ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            removeResponses.append( t.result )

        # main.TRUE = successfully changed the set
        # main.FALSE = action resulted in no change in set
        # main.ERROR - Some error in executing the function
        removeResults = main.TRUE
        for i in range( numControllers ):
            if removeResponses[ i ] == main.TRUE:
                # All is well
                pass
            elif removeResponses[ i ] == main.FALSE:
                # not in set, probably fine
                pass
            elif removeResponses[ i ] == main.ERROR:
                # Error in execution
                removeResults = main.FALSE
            else:
                # unexpected result
                removeResults = main.FALSE
        if removeResults != main.TRUE:
            main.log.error( "Error executing set remove" )

        # Check if set is still correct
        size = len( onosSet )
        getResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestGet,
                             name="setTestGet-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            getResponses.append( t.result )
        getResults = main.TRUE
        for i in range( numControllers ):
            if isinstance( getResponses[ i ], list):
                current = set( getResponses[ i ] )
                if len( current ) == len( getResponses[ i ] ):
                    # no repeats
                    if onosSet != current:
                        main.log.error( "ONOS" + str( i + 1 ) +
                                        " has incorrect view" +
                                        " of set " + onosSetName + ":\n" +
                                        str( getResponses[ i ] ) )
                        main.log.debug( "Expected: " + str( onosSet ) )
                        main.log.debug( "Actual: " + str( current ) )
                        getResults = main.FALSE
                else:
                    # error, set is not a set
                    main.log.error( "ONOS" + str( i + 1 ) +
                                    " has repeat elements in" +
                                    " set " + onosSetName + ":\n" +
                                    str( getResponses[ i ] ) )
                    getResults = main.FALSE
            elif getResponses[ i ] == main.ERROR:
                getResults = main.FALSE
        sizeResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestSize,
                             name="setTestSize-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            sizeResponses.append( t.result )
        sizeResults = main.TRUE
        for i in range( numControllers ):
            if size != sizeResponses[ i ]:
                sizeResults = main.FALSE
                main.log.error( "ONOS" + str( i + 1 ) +
                                " expected a size of " + str( size ) +
                                " for set " + onosSetName +
                                " but got " + str( sizeResponses[ i ] ) )
        removeResults = removeResults and getResults and sizeResults
        utilities.assert_equals( expect=main.TRUE,
                                 actual=removeResults,
                                 onpass="Set remove correct",
                                 onfail="Set remove was incorrect" )

        main.step( "Distributed Set removeAll()" )
        onosSet.difference_update( addAllValue.split() )
        removeAllResponses = []
        threads = []
        try:
            for i in range( numControllers ):
                t = main.Thread( target=CLIs[i].setTestRemove,
                                 name="setTestRemoveAll-" + str( i ),
                                 args=[ onosSetName, addAllValue ] )
                threads.append( t )
                t.start()
            for t in threads:
                t.join()
                removeAllResponses.append( t.result )
        except Exception, e:
            main.log.exception(e)

        # main.TRUE = successfully changed the set
        # main.FALSE = action resulted in no change in set
        # main.ERROR - Some error in executing the function
        removeAllResults = main.TRUE
        for i in range( numControllers ):
            if removeAllResponses[ i ] == main.TRUE:
                # All is well
                pass
            elif removeAllResponses[ i ] == main.FALSE:
                # not in set, probably fine
                pass
            elif removeAllResponses[ i ] == main.ERROR:
                # Error in execution
                removeAllResults = main.FALSE
            else:
                # unexpected result
                removeAllResults = main.FALSE
        if removeAllResults != main.TRUE:
            main.log.error( "Error executing set removeAll" )

        # Check if set is still correct
        size = len( onosSet )
        getResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestGet,
                             name="setTestGet-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            getResponses.append( t.result )
        getResults = main.TRUE
        for i in range( numControllers ):
            if isinstance( getResponses[ i ], list):
                current = set( getResponses[ i ] )
                if len( current ) == len( getResponses[ i ] ):
                    # no repeats
                    if onosSet != current:
                        main.log.error( "ONOS" + str( i + 1 ) +
                                        " has incorrect view" +
                                        " of set " + onosSetName + ":\n" +
                                        str( getResponses[ i ] ) )
                        main.log.debug( "Expected: " + str( onosSet ) )
                        main.log.debug( "Actual: " + str( current ) )
                        getResults = main.FALSE
                else:
                    # error, set is not a set
                    main.log.error( "ONOS" + str( i + 1 ) +
                                    " has repeat elements in" +
                                    " set " + onosSetName + ":\n" +
                                    str( getResponses[ i ] ) )
                    getResults = main.FALSE
            elif getResponses[ i ] == main.ERROR:
                getResults = main.FALSE
        sizeResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestSize,
                             name="setTestSize-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            sizeResponses.append( t.result )
        sizeResults = main.TRUE
        for i in range( numControllers ):
            if size != sizeResponses[ i ]:
                sizeResults = main.FALSE
                main.log.error( "ONOS" + str( i + 1 ) +
                                " expected a size of " + str( size ) +
                                " for set " + onosSetName +
                                " but got " + str( sizeResponses[ i ] ) )
        removeAllResults = removeAllResults and getResults and sizeResults
        utilities.assert_equals( expect=main.TRUE,
                                 actual=removeAllResults,
                                 onpass="Set removeAll correct",
                                 onfail="Set removeAll was incorrect" )

        main.step( "Distributed Set addAll()" )
        onosSet.update( addAllValue.split() )
        addResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestAdd,
                             name="setTestAddAll-" + str( i ),
                             args=[ onosSetName, addAllValue ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            addResponses.append( t.result )

        # main.TRUE = successfully changed the set
        # main.FALSE = action resulted in no change in set
        # main.ERROR - Some error in executing the function
        addAllResults = main.TRUE
        for i in range( numControllers ):
            if addResponses[ i ] == main.TRUE:
                # All is well
                pass
            elif addResponses[ i ] == main.FALSE:
                # Already in set, probably fine
                pass
            elif addResponses[ i ] == main.ERROR:
                # Error in execution
                addAllResults = main.FALSE
            else:
                # unexpected result
                addAllResults = main.FALSE
        if addAllResults != main.TRUE:
            main.log.error( "Error executing set addAll" )

        # Check if set is still correct
        size = len( onosSet )
        getResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestGet,
                             name="setTestGet-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            getResponses.append( t.result )
        getResults = main.TRUE
        for i in range( numControllers ):
            if isinstance( getResponses[ i ], list):
                current = set( getResponses[ i ] )
                if len( current ) == len( getResponses[ i ] ):
                    # no repeats
                    if onosSet != current:
                        main.log.error( "ONOS" + str( i + 1 ) +
                                        " has incorrect view" +
                                        " of set " + onosSetName + ":\n" +
                                        str( getResponses[ i ] ) )
                        main.log.debug( "Expected: " + str( onosSet ) )
                        main.log.debug( "Actual: " + str( current ) )
                        getResults = main.FALSE
                else:
                    # error, set is not a set
                    main.log.error( "ONOS" + str( i + 1 ) +
                                    " has repeat elements in" +
                                    " set " + onosSetName + ":\n" +
                                    str( getResponses[ i ] ) )
                    getResults = main.FALSE
            elif getResponses[ i ] == main.ERROR:
                getResults = main.FALSE
        sizeResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestSize,
                             name="setTestSize-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            sizeResponses.append( t.result )
        sizeResults = main.TRUE
        for i in range( numControllers ):
            if size != sizeResponses[ i ]:
                sizeResults = main.FALSE
                main.log.error( "ONOS" + str( i + 1 ) +
                                " expected a size of " + str( size ) +
                                " for set " + onosSetName +
                                " but got " + str( sizeResponses[ i ] ) )
        addAllResults = addAllResults and getResults and sizeResults
        utilities.assert_equals( expect=main.TRUE,
                                 actual=addAllResults,
                                 onpass="Set addAll correct",
                                 onfail="Set addAll was incorrect" )

        main.step( "Distributed Set clear()" )
        onosSet.clear()
        clearResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestRemove,
                             name="setTestClear-" + str( i ),
                             args=[ onosSetName, " "],  # Values doesn't matter
                             kwargs={ "clear": True } )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            clearResponses.append( t.result )

        # main.TRUE = successfully changed the set
        # main.FALSE = action resulted in no change in set
        # main.ERROR - Some error in executing the function
        clearResults = main.TRUE
        for i in range( numControllers ):
            if clearResponses[ i ] == main.TRUE:
                # All is well
                pass
            elif clearResponses[ i ] == main.FALSE:
                # Nothing set, probably fine
                pass
            elif clearResponses[ i ] == main.ERROR:
                # Error in execution
                clearResults = main.FALSE
            else:
                # unexpected result
                clearResults = main.FALSE
        if clearResults != main.TRUE:
            main.log.error( "Error executing set clear" )

        # Check if set is still correct
        size = len( onosSet )
        getResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestGet,
                             name="setTestGet-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            getResponses.append( t.result )
        getResults = main.TRUE
        for i in range( numControllers ):
            if isinstance( getResponses[ i ], list):
                current = set( getResponses[ i ] )
                if len( current ) == len( getResponses[ i ] ):
                    # no repeats
                    if onosSet != current:
                        main.log.error( "ONOS" + str( i + 1 ) +
                                        " has incorrect view" +
                                        " of set " + onosSetName + ":\n" +
                                        str( getResponses[ i ] ) )
                        main.log.debug( "Expected: " + str( onosSet ) )
                        main.log.debug( "Actual: " + str( current ) )
                        getResults = main.FALSE
                else:
                    # error, set is not a set
                    main.log.error( "ONOS" + str( i + 1 ) +
                                    " has repeat elements in" +
                                    " set " + onosSetName + ":\n" +
                                    str( getResponses[ i ] ) )
                    getResults = main.FALSE
            elif getResponses[ i ] == main.ERROR:
                getResults = main.FALSE
        sizeResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestSize,
                             name="setTestSize-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            sizeResponses.append( t.result )
        sizeResults = main.TRUE
        for i in range( numControllers ):
            if size != sizeResponses[ i ]:
                sizeResults = main.FALSE
                main.log.error( "ONOS" + str( i + 1 ) +
                                " expected a size of " + str( size ) +
                                " for set " + onosSetName +
                                " but got " + str( sizeResponses[ i ] ) )
        clearResults = clearResults and getResults and sizeResults
        utilities.assert_equals( expect=main.TRUE,
                                 actual=clearResults,
                                 onpass="Set clear correct",
                                 onfail="Set clear was incorrect" )

        main.step( "Distributed Set addAll()" )
        onosSet.update( addAllValue.split() )
        addResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestAdd,
                             name="setTestAddAll-" + str( i ),
                             args=[ onosSetName, addAllValue ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            addResponses.append( t.result )

        # main.TRUE = successfully changed the set
        # main.FALSE = action resulted in no change in set
        # main.ERROR - Some error in executing the function
        addAllResults = main.TRUE
        for i in range( numControllers ):
            if addResponses[ i ] == main.TRUE:
                # All is well
                pass
            elif addResponses[ i ] == main.FALSE:
                # Already in set, probably fine
                pass
            elif addResponses[ i ] == main.ERROR:
                # Error in execution
                addAllResults = main.FALSE
            else:
                # unexpected result
                addAllResults = main.FALSE
        if addAllResults != main.TRUE:
            main.log.error( "Error executing set addAll" )

        # Check if set is still correct
        size = len( onosSet )
        getResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestGet,
                             name="setTestGet-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            getResponses.append( t.result )
        getResults = main.TRUE
        for i in range( numControllers ):
            if isinstance( getResponses[ i ], list):
                current = set( getResponses[ i ] )
                if len( current ) == len( getResponses[ i ] ):
                    # no repeats
                    if onosSet != current:
                        main.log.error( "ONOS" + str( i + 1 ) +
                                        " has incorrect view" +
                                        " of set " + onosSetName + ":\n" +
                                        str( getResponses[ i ] ) )
                        main.log.debug( "Expected: " + str( onosSet ) )
                        main.log.debug( "Actual: " + str( current ) )
                        getResults = main.FALSE
                else:
                    # error, set is not a set
                    main.log.error( "ONOS" + str( i + 1 ) +
                                    " has repeat elements in" +
                                    " set " + onosSetName + ":\n" +
                                    str( getResponses[ i ] ) )
                    getResults = main.FALSE
            elif getResponses[ i ] == main.ERROR:
                getResults = main.FALSE
        sizeResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestSize,
                             name="setTestSize-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            sizeResponses.append( t.result )
        sizeResults = main.TRUE
        for i in range( numControllers ):
            if size != sizeResponses[ i ]:
                sizeResults = main.FALSE
                main.log.error( "ONOS" + str( i + 1 ) +
                                " expected a size of " + str( size ) +
                                " for set " + onosSetName +
                                " but got " + str( sizeResponses[ i ] ) )
        addAllResults = addAllResults and getResults and sizeResults
        utilities.assert_equals( expect=main.TRUE,
                                 actual=addAllResults,
                                 onpass="Set addAll correct",
                                 onfail="Set addAll was incorrect" )

        main.step( "Distributed Set retain()" )
        onosSet.intersection_update( retainValue.split() )
        retainResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestRemove,
                             name="setTestRetain-" + str( i ),
                             args=[ onosSetName, retainValue ],
                             kwargs={ "retain": True } )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            retainResponses.append( t.result )

        # main.TRUE = successfully changed the set
        # main.FALSE = action resulted in no change in set
        # main.ERROR - Some error in executing the function
        retainResults = main.TRUE
        for i in range( numControllers ):
            if retainResponses[ i ] == main.TRUE:
                # All is well
                pass
            elif retainResponses[ i ] == main.FALSE:
                # Already in set, probably fine
                pass
            elif retainResponses[ i ] == main.ERROR:
                # Error in execution
                retainResults = main.FALSE
            else:
                # unexpected result
                retainResults = main.FALSE
        if retainResults != main.TRUE:
            main.log.error( "Error executing set retain" )

        # Check if set is still correct
        size = len( onosSet )
        getResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestGet,
                             name="setTestGet-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            getResponses.append( t.result )
        getResults = main.TRUE
        for i in range( numControllers ):
            if isinstance( getResponses[ i ], list):
                current = set( getResponses[ i ] )
                if len( current ) == len( getResponses[ i ] ):
                    # no repeats
                    if onosSet != current:
                        main.log.error( "ONOS" + str( i + 1 ) +
                                        " has incorrect view" +
                                        " of set " + onosSetName + ":\n" +
                                        str( getResponses[ i ] ) )
                        main.log.debug( "Expected: " + str( onosSet ) )
                        main.log.debug( "Actual: " + str( current ) )
                        getResults = main.FALSE
                else:
                    # error, set is not a set
                    main.log.error( "ONOS" + str( i + 1 ) +
                                    " has repeat elements in" +
                                    " set " + onosSetName + ":\n" +
                                    str( getResponses[ i ] ) )
                    getResults = main.FALSE
            elif getResponses[ i ] == main.ERROR:
                getResults = main.FALSE
        sizeResponses = []
        threads = []
        for i in range( numControllers ):
            t = main.Thread( target=CLIs[i].setTestSize,
                             name="setTestSize-" + str( i ),
                             args=[ onosSetName ] )
            threads.append( t )
            t.start()
        for t in threads:
            t.join()
            sizeResponses.append( t.result )
        sizeResults = main.TRUE
        for i in range( numControllers ):
            if size != sizeResponses[ i ]:
                sizeResults = main.FALSE
                main.log.error( "ONOS" + str( i + 1 ) +
                                " expected a size of " +
                                str( size ) + " for set " + onosSetName +
                                " but got " + str( sizeResponses[ i ] ) )
        retainResults = retainResults and getResults and sizeResults
        utilities.assert_equals( expect=main.TRUE,
                                 actual=retainResults,
                                 onpass="Set retain correct",
                                 onfail="Set retain was incorrect" )