add vlan to speaker1 and 3 peers
Change-Id: Ia3938e954b27f7af1b5966f049c56e7eff93d26c
diff --git a/TestON/tests/USECASE_SdnipFunction_fsfw/Dependency/USECASE_SdnipI2MN.py b/TestON/tests/USECASE_SdnipFunction_fsfw/Dependency/USECASE_SdnipI2MN.py
index b034d34..81cfca5 100755
--- a/TestON/tests/USECASE_SdnipFunction_fsfw/Dependency/USECASE_SdnipI2MN.py
+++ b/TestON/tests/USECASE_SdnipFunction_fsfw/Dependency/USECASE_SdnipI2MN.py
@@ -28,6 +28,7 @@
QUAGGA_CONFIG_DIR = '~/OnosSystemTest/TestON/tests/USECASE_SdnipFunction_fsfw/Dependency/'
# onos1IP = '10.254.1.201'
numSw = 39
+vlanId = 8
class SDNTopo( Topo ):
@@ -284,9 +285,10 @@
# Adding addresses to host64513_1 interface connected to sw24
# for BGP peering
speaker1.setMAC( '00:00:00:00:00:01', 'speaker1-eth0' )
- speaker1.cmd( 'ip addr add 10.0.4.101/24 dev speaker1-eth0' )
- speaker1.cmd( 'ip addr add 10.0.5.101/24 dev speaker1-eth0' )
- speaker1.cmd( 'ip addr add 10.0.6.101/24 dev speaker1-eth0' )
+ speaker1.cmd( "sudo vconfig add speaker1-eth0 %d" % vlanId )
+ speaker1.cmd( 'ip addr add 10.0.4.101/24 dev speaker1-eth0.%d' % vlanId )
+ speaker1.cmd( 'ip addr add 10.0.5.101/24 dev speaker1-eth0.%d' % vlanId )
+ speaker1.cmd( 'ip addr add 10.0.6.101/24 dev speaker1-eth0.%d' % vlanId )
speaker1.defaultIntf().setIP( '10.1.4.101/24' )
speaker1.defaultIntf().setMAC( '00:00:00:00:00:01' )
@@ -295,12 +297,18 @@
net.start()
# setup configuration on the interface connected to switch
- peer64514.cmd( "ifconfig peer64514-eth0 10.0.4.1 up" )
+
peer64514.setMAC( '00:00:00:00:00:04', 'peer64514-eth0' )
- peer64515.cmd( "ifconfig peer64515-eth0 10.0.5.1 up" )
+ peer64514.cmd( "sudo vconfig add peer64514-eth0 %d" % vlanId )
+ peer64514.cmd( "ip addr add 10.0.4.1/24 dev peer64514-eth0.%d" % vlanId )
+
peer64515.setMAC( '00:00:00:00:00:05', 'peer64515-eth0' )
- peer64516.cmd( "ifconfig peer64516-eth0 10.0.6.1 up" )
+ peer64515.cmd( "sudo vconfig add peer64515-eth0 %d" % vlanId )
+ peer64515.cmd( "ip addr add 10.0.5.1/24 dev peer64515-eth0.%d" % vlanId )
+
peer64516.setMAC( '00:00:00:00:00:06', 'peer64516-eth0' )
+ peer64516.cmd( "sudo vconfig add peer64516-eth0 %d" % vlanId )
+ peer64516.cmd( "ip addr add 10.0.6.1/24 dev peer64516-eth0.%d" % vlanId )
# setup configuration on the interface connected to hosts
peer64514.setIP( "4.0.0.254", 8, "peer64514-eth1" )