add tests for partial failures of MPSP and SPMP intents
Change-Id: Idfb5950291ede3ee971402f300facaa00d3537bc
diff --git a/TestON/tests/FUNC/FUNCintent/FUNCintent.py b/TestON/tests/FUNC/FUNCintent/FUNCintent.py
index 7dc6fb3..9cd16a8 100644
--- a/TestON/tests/FUNC/FUNCintent/FUNCintent.py
+++ b/TestON/tests/FUNC/FUNCintent/FUNCintent.py
@@ -1931,6 +1931,9 @@
"""
Tests Multi to Single Point Intent and Single to Multi Point Intent End Point Failure
"""
+ # At some later point discussion on this behavior in MPSP and SPMP intents
+ # will be reoppened and this test case may need to be updated to reflect
+ # the outcomes of that discussion
if main.initialized == main.FALSE:
main.log.error( "Test components did not start correctly, skipping further tests" )
main.skipCase()
@@ -1955,10 +1958,9 @@
main.initialized = main.FALSE
main.skipCase()
main.case( "Test Multi to Single End Point Failure" )
- main.step( "Installing Multi to Single Point intents" )
-
- main.assertReturnString = "Assertion results for IPV4 multi to single \
- point intent end point failure with no options set\n"
+ main.step( "Installing Multi to Single Point intents with no options set" )
+ main.assertReturnString = "Assertion results for IPV4 multi to single " +\
+ "point intent end point failure with no options set\n"
senders = [
{ "name":"h16", "device":"of:0000000000000006/8" },
{ "name":"h24", "device":"of:0000000000000007/8" }
@@ -2004,8 +2006,60 @@
onpass=main.assertReturnString,
onfail=main.assertReturnString )
+ main.step( "Installing Multi to Single Point intents with partial failure allowed" )
+
+ main.assertReturnString = "Assertion results for IPV4 multi to single " +\
+ "with partial failures allowed\n"
+ senders = [
+ { "name":"h16", "device":"of:0000000000000006/8" },
+ { "name":"h24", "device":"of:0000000000000007/8" }
+ ]
+ recipients = [
+ { "name":"h8", "device":"of:0000000000000005/8" }
+ ]
+ isolatedSenders = [
+ { "name":"h24"}
+ ]
+ isolatedRecipients = []
+ testResult = main.FALSE
+ installResult = main.FALSE
+ installResult = main.intentFunction.installMultiToSingleIntent(
+ main,
+ name="NOOPTION",
+ senders=senders,
+ recipients=recipients,
+ sw1="s5",
+ sw2="s2",
+ partial=True )
+
+ if installResult:
+ testResult = main.intentFunction.testEndPointFail(
+ main,
+ intentId=installResult,
+ name="NOOPTION",
+ senders=senders,
+ recipients=recipients,
+ isolatedSenders=isolatedSenders,
+ isolatedRecipients=isolatedRecipients,
+ sw1="s6",
+ sw2="s2",
+ sw3="s4",
+ sw4="s1",
+ sw5="s3",
+ expectedLink1=16,
+ expectedLink2=14,
+ partial=True )
+ else:
+ main.CLIs[ 0 ].removeAllIntents( purge=True )
+
+ utilities.assert_equals( expect=main.TRUE,
+ actual=testResult,
+ onpass=main.assertReturnString,
+ onfail=main.assertReturnString )
+
main.step( "NOOPTION: Install and test single point to multi point intents" )
- main.assertReturnString = "Assertion results for IPV4 single to multi point intent with no options set\n"
+ main.assertReturnString = "Assertion results for IPV4 single to multi " +\
+ "point intent with no options set\n"
senders = [
{ "name":"h8", "device":"of:0000000000000005/8" }
]
@@ -2013,7 +2067,8 @@
{ "name":"h16", "device":"of:0000000000000006/8" },
{ "name":"h24", "device":"of:0000000000000007/8" }
]
- isolatedSenders = [
+ isolatedSenders = []
+ isolatedRecipients = [
{ "name":"h24"}
]
testResult = main.FALSE
@@ -2049,5 +2104,56 @@
actual=testResult,
onpass=main.assertReturnString,
onfail=main.assertReturnString )
+ # Right now this functionality doesn't work properly in SPMP intents
+ main.step( "NOOPTION: Install and test single point to multi point " +\
+ "intents with partial failures allowed" )
+ main.assertReturnString = "Assertion results for IPV4 single to multi " +\
+ "point intent with partial failures allowed\n"
+ senders = [
+ { "name":"h8", "device":"of:0000000000000005/8" }
+ ]
+ recipients = [
+ { "name":"h16", "device":"of:0000000000000006/8" },
+ { "name":"h24", "device":"of:0000000000000007/8" }
+ ]
+ isolatedSenders = []
+ isolatedRecipients = [
+ { "name":"h24"}
+ ]
+ testResult = main.FALSE
+ installResult = main.FALSE
+ installResult = main.intentFunction.installSingleToMultiIntent(
+ main,
+ name="NOOPTION",
+ senders=senders,
+ recipients=recipients,
+ sw1="s5",
+ sw2="s2",
+ partial=True)
+
+ if installResult:
+ testResult = main.intentFunction.testEndPointFail(
+ main,
+ intentId=installResult,
+ name="NOOPTION",
+ senders=senders,
+ recipients=recipients,
+ isolatedSenders=isolatedSenders,
+ isolatedRecipients=isolatedRecipients,
+ sw1="s6",
+ sw2="s2",
+ sw3="s4",
+ sw4="s1",
+ sw5="s3",
+ expectedLink1=16,
+ expectedLink2=14,
+ partial=True )
+ else:
+ main.CLIs[ 0 ].removeAllIntents( purge=True )
+
+ utilities.assert_equals( expect=main.TRUE,
+ actual=testResult,
+ onpass=main.assertReturnString,
+ onfail=main.assertReturnString )
main.intentFunction.report( main )
\ No newline at end of file
diff --git a/TestON/tests/FUNC/FUNCintent/dependencies/FuncIntentFunction.py b/TestON/tests/FUNC/FUNCintent/dependencies/FuncIntentFunction.py
index c3104a5..1caa472 100644
--- a/TestON/tests/FUNC/FUNCintent/dependencies/FuncIntentFunction.py
+++ b/TestON/tests/FUNC/FUNCintent/dependencies/FuncIntentFunction.py
@@ -699,7 +699,8 @@
tcp="",
sw1="",
sw2="",
- setVlan=""):
+ setVlan="",
+ partial=False ):
"""
Installs a Single to Multi Point Intent
@@ -787,7 +788,8 @@
tcpSrc="",
tcpDst="",
vlanId=vlanId,
- setVlan=setVlan )
+ setVlan=setVlan,
+ partial=partial )
except (KeyError, TypeError):
errorMsg = "There was a problem loading the hosts data."
if intentId:
@@ -815,7 +817,8 @@
tcp="",
sw1="",
sw2="",
- setVlan=""):
+ setVlan="",
+ partial=False ):
"""
Installs a Multi to Single Point Intent
@@ -902,7 +905,8 @@
tcpSrc="",
tcpDst="",
vlanId=vlanId,
- setVlan=setVlan )
+ setVlan=setVlan,
+ partial=partial )
except (KeyError, TypeError):
errorMsg = "There was a problem loading the hosts data."
if intentId:
@@ -1162,7 +1166,8 @@
sw4="",
sw5="",
expectedLink1=0,
- expectedLink2=0 ):
+ expectedLink2=0,
+ partial=False ):
"""
Test Single to Multipoint Topology for Endpoint failures
"""
@@ -1215,9 +1220,9 @@
# Check flows count in each node
if utilities.retry( f=checkFlowsCount, retValue=main.FALSE,
- args=[ main ] ) and utilities.retry( f=checkFlowsState,
- retValue=main.FALSE,
- args=[ main ] ):
+ args=[ main ], attempts=5 ) and utilities.retry( f=checkFlowsState,
+ retValue=main.FALSE,
+ args=[ main ], attempts=5 ):
main.assertReturnString += 'Initial Flow State Passed\n'
else:
main.assertReturnString += 'Intial Flow State Failed\n'
@@ -1285,55 +1290,107 @@
main.assertReturnString += 'Isolation link Down Failed\n'
testResult = main.FALSE
- # Check intent state
- if utilities.retry( f=checkIntentState, retValue=main.FALSE,
- args=( main, [ intentId ] ), sleep=main.checkIntentSleep ):
- main.assertReturnString += 'Isolation link Down Intent State Passed\n'
- else:
- main.assertReturnString += 'Isolation link Down Intent State Failed\n'
- testResult = main.FALSE
+ if partial:
+ # Check intent state
+ if utilities.retry( f=checkIntentState, retValue=main.FALSE,
+ args=( main, [ intentId ] ), sleep=main.checkIntentSleep ):
+ main.assertReturnString += 'Partial failure isolation link Down Intent State Passed\n'
+ else:
+ main.assertReturnString += 'Partial failure isolation link Down Intent State Failed\n'
+ testResult = main.FALSE
- # Check flows count in each node
- if utilities.retry( f=checkFlowsCount, retValue=main.FALSE,
- args=[ main ] ) and utilities.retry( f=checkFlowsState,
- retValue=main.FALSE, args=[ main ] ):
- main.assertReturnString += 'Isolation link Down Flow State Passed\n'
- else:
- main.assertReturnString += 'Isolation link Down Flow State Failed\n'
- testResult = main.FALSE
+ # Check flows count in each node
+ if utilities.retry( f=checkFlowsCount, retValue=main.FALSE,
+ args=[ main ], attempts=5 ) and utilities.retry( f=checkFlowsState,
+ retValue=main.FALSE,
+ args=[ main ], attempts=5 ):
+ main.assertReturnString += 'Partial failure isolation link Down Flow State Passed\n'
+ else:
+ main.assertReturnString += 'Partial failure isolation link Down Flow State Failed\n'
+ testResult = main.FALSE
- # Check OnosTopology
- if utilities.retry( f=checkTopology, retValue=main.FALSE, args=( main, expectedLink2 ) ):
- main.assertReturnString += 'Isolation link Down Topology State Passed\n'
- else:
- main.assertReturnString += 'Isolation link Down Topology State Failed\n'
- testResult = main.FALSE
+ # Check OnosTopology
+ if utilities.retry( f=checkTopology, retValue=main.FALSE, args=( main, expectedLink2 ) ):
+ main.assertReturnString += 'Partial failure isolation link Down Topology State Passed\n'
+ else:
+ main.assertReturnString += 'Partial failure isolation link Down Topology State Failed\n'
+ testResult = main.FALSE
- # Check Connectivity
- # First check connectivity of any isolated senders to recipients
- if isolatedSenderNames:
- if scapyCheckConnection( main, isolatedSenderNames, recipientNames, None, None, None, None, main.TRUE ):
+ # Check Connectivity
+ # First check connectivity of any isolated senders to recipients
+ if isolatedSenderNames:
+ if scapyCheckConnection( main, isolatedSenderNames, recipientNames, None, None, None, None, main.TRUE ):
+ main.assertReturnString += 'Partial failure isolation link Down Connectivity Check Passed\n'
+ else:
+ main.assertReturnString += 'Partial failure isolation link Down Connectivity Check Failed\n'
+ testResult = main.FALSE
+
+ # Next check connectivity of senders to any isolated recipients
+ if isolatedRecipientNames:
+ if scapyCheckConnection( main, senderNames, isolatedRecipientNames, None, None, None, None, main.TRUE ):
+ main.assertReturnString += 'Partial failure isolation link Down Connectivity Check Passed\n'
+ else:
+ main.assertReturnString += 'Partial failure isolation link Down Connectivity Check Failed\n'
+ testResult = main.FALSE
+
+ # Next check connectivity of connected senders and recipients
+ if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE,
+ args=( main, connectedSenderNames , connectedRecipientNames ) ):
+ main.assertReturnString += 'Partial failure isolation link Down Connectivity Check Passed\n'
+ else:
+ main.assertReturnString += 'Partial failure isolation link Down Connectivity Check Failed\n'
+ testResult = main.FALSE
+ else:
+ # Check intent state
+ if not utilities.retry( f=checkIntentState, retValue=main.TRUE,
+ args=( main, [ intentId ] ), sleep=main.checkIntentSleep ):
+ main.assertReturnString += 'Isolation link Down Intent State Passed\n'
+ else:
+ main.assertReturnString += 'Isolation link Down Intent State Failed\n'
+ testResult = main.FALSE
+
+ # Check flows count in each node
+ if utilities.retry( f=checkFlowsCount, retValue=main.FALSE,
+ args=[ main ], attempts=5 ) and utilities.retry( f=checkFlowsState,
+ retValue=main.FALSE,
+ args=[ main ], attempts=5 ):
+ main.assertReturnString += 'Isolation link Down Flow State Passed\n'
+ else:
+ main.assertReturnString += 'Isolation link Down Flow State Failed\n'
+ testResult = main.FALSE
+
+ # Check OnosTopology
+ if utilities.retry( f=checkTopology, retValue=main.FALSE, args=( main, expectedLink2 ) ):
+ main.assertReturnString += 'Isolation link Down Topology State Passed\n'
+ else:
+ main.assertReturnString += 'Isolation link Down Topology State Failed\n'
+ testResult = main.FALSE
+
+ # Check Connectivity
+ # First check connectivity of any isolated senders to recipients
+ if isolatedSenderNames:
+ if scapyCheckConnection( main, isolatedSenderNames, recipientNames, None, None, None, None, main.TRUE ):
+ main.assertReturnString += 'Isolation link Down Connectivity Check Passed\n'
+ else:
+ main.assertReturnString += 'Isolation link Down Connectivity Check Failed\n'
+ testResult = main.FALSE
+
+ # Next check connectivity of senders to any isolated recipients
+ if isolatedRecipientNames:
+ if scapyCheckConnection( main, senderNames, isolatedRecipientNames, None, None, None, None, main.TRUE ):
+ main.assertReturnString += 'Isolation link Down Connectivity Check Passed\n'
+ else:
+ main.assertReturnString += 'Isolation link Down Connectivity Check Failed\n'
+ testResult = main.FALSE
+
+ # Next check connectivity of connected senders and recipients
+ if utilities.retry( f=scapyCheckConnection, retValue=main.TRUE,
+ args=( main, connectedSenderNames , connectedRecipientNames, None, None, None, None, main.TRUE ) ):
main.assertReturnString += 'Isolation link Down Connectivity Check Passed\n'
else:
main.assertReturnString += 'Isolation link Down Connectivity Check Failed\n'
testResult = main.FALSE
- # Next check connectivity of senders to any isolated recipients
- if isolatedRecipientNames:
- if scapyCheckConnection( main, senderNames, isolatedRecipientNames, None, None, None, None, main.TRUE ):
- main.assertReturnString += 'Isolation link Down Connectivity Check Passed\n'
- else:
- main.assertReturnString += 'Isolation link Down Connectivity Check Failed\n'
- testResult = main.FALSE
-
- # Next check connectivity of connected senders and recipients
- if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE,
- args=( main, connectedSenderNames , connectedRecipientNames ) ):
- main.assertReturnString += 'Isolation link Down Connectivity Check Passed\n'
- else:
- main.assertReturnString += 'Isolation link Down Connectivity Check Failed\n'
- testResult = main.FALSE
-
# Bring the links back up
# Bring first link up
if utilities.retry( f=link, retValue=main.FALSE, args=( main, sw1, sw2, "up" ) ):
@@ -1369,8 +1426,9 @@
# Check flows count in each node
if utilities.retry( f=checkFlowsCount, retValue=main.FALSE,
- args=[ main ] ) and utilities.retry( f=checkFlowsState,
- retValue=main.FALSE, args=[ main ] ):
+ args=[ main ], sleep=5, attempts=5 ) and utilities.retry( f=checkFlowsState,
+ retValue=main.FALSE,
+ args=[ main ], sleep=5, attempts=5 ):
main.assertReturnString += 'Link Up Flow State Passed\n'
else:
main.assertReturnString += 'Link Up Flow State Failed\n'