Add HA tests
If no OC vars are found, set onosdriver.maxNodes to None
Change-Id: I74ff5762a8399a93084e0d8a2acd11acb8a5f4e5
diff --git a/TestON/tests/HAsanity/HAsanity.params b/TestON/tests/HAsanity/HAsanity.params
new file mode 100644
index 0000000..4ec3ad4
--- /dev/null
+++ b/TestON/tests/HAsanity/HAsanity.params
@@ -0,0 +1,81 @@
+<PARAMS>
+ #List of test cases:
+ #CASE1: Compile ONOS and push it to the test machines
+ #CASE2: Assign mastership to controllers
+ #CASE3: Assign intents
+ #CASE4: Ping across added host intents
+ #CASE5: Reading state of ONOS
+ #CASE6: The Failure case. Since this is the Sanity test, we do nothing.
+ #CASE7: Check state after control plane failure
+ #CASE8: Compare topo
+ #CASE9: Link s3-s28 down
+ #CASE10: Link s3-s28 up
+ #CASE11: Switch down
+ #CASE12: Switch up
+ #CASE13: Clean up
+ #CASE14: start election app on all onos nodes
+ #CASE15: Check that Leadership Election is still functional
+ #CASE16: Install Distributed Primitives app
+ #CASE17: Check for basic functionality with distributed primitives
+ #1,2,8,3,4,5,14,16,17,[6],8,7,4,15,17,9,8,4,10,8,4,11,8,4,12,8,4,13
+ <testcases>1,2,8,21,8,3,4,5,14,16,17,[6],8,7,4,15,17,9,8,4,10,8,4,11,8,4,12,8,4,13</testcases>
+ <ENV>
+ <cellName>HA</cellName>
+ <appString>drivers,openflow,proxyarp,mobility</appString>
+ </ENV>
+ <Git> False </Git>
+ <branch> master </branch>
+ <num_controllers> 7 </num_controllers>
+ <tcpdump> False </tcpdump>
+
+ <CTRL>
+ <port1>6633</port1>
+ <port2>6633</port2>
+ <port3>6633</port3>
+ <port4>6633</port4>
+ <port5>6633</port5>
+ <port6>6633</port6>
+ <port7>6633</port7>
+ </CTRL>
+ <BACKUP>
+ <ENABLED> False </ENABLED>
+ <TESTONUSER>admin</TESTONUSER>
+ <TESTONIP>10.128.30.9</TESTONIP>
+ </BACKUP>
+ <PING>
+ <source1>h8</source1>
+ <source2>h9</source2>
+ <source3>h10</source3>
+ <source4>h11</source4>
+ <source5>h12</source5>
+ <source6>h13</source6>
+ <source7>h14</source7>
+ <source8>h15</source8>
+ <source9>h16</source9>
+ <source10>h17</source10>
+ <target1>10.0.0.18</target1>
+ <target2>10.0.0.19</target2>
+ <target3>10.0.0.20</target3>
+ <target4>10.0.0.21</target4>
+ <target5>10.0.0.22</target5>
+ <target6>10.0.0.23</target6>
+ <target7>10.0.0.24</target7>
+ <target8>10.0.0.25</target8>
+ <target9>10.0.0.26</target9>
+ <target10>10.0.0.27</target10>
+ </PING>
+ <timers>
+ <LinkDiscovery>.2</LinkDiscovery>
+ <SwitchDiscovery>.2</SwitchDiscovery>
+ </timers>
+ <kill>
+ <switch> s5 </switch>
+ <dpid> 0000000000005000 </dpid>
+ <links> h5 s2 s1 s6 </links>
+ </kill>
+ <MNtcpdump>
+ <intf>eth0</intf>
+ <port> </port>
+ <folder>~/packet_captures/</folder>
+ </MNtcpdump>
+</PARAMS>
diff --git a/TestON/tests/HAsanity/HAsanity.py b/TestON/tests/HAsanity/HAsanity.py
new file mode 100644
index 0000000..c223c3f
--- /dev/null
+++ b/TestON/tests/HAsanity/HAsanity.py
@@ -0,0 +1,3930 @@
+"""
+Description: This test is to determine if the HA test setup is
+ working correctly. There are no failures so this test should
+ have a 100% pass rate
+
+List of test cases:
+CASE1: Compile ONOS and push it to the test machines
+CASE2: Assign devices to controllers
+CASE21: Assign mastership to controllers
+CASE3: Assign intents
+CASE4: Ping across added host intents
+CASE5: Reading state of ONOS
+CASE6: The Failure case. Since this is the Sanity test, we do nothing.
+CASE7: Check state after control plane failure
+CASE8: Compare topo
+CASE9: Link s3-s28 down
+CASE10: Link s3-s28 up
+CASE11: Switch down
+CASE12: Switch up
+CASE13: Clean up
+CASE14: start election app on all onos nodes
+CASE15: Check that Leadership Election is still functional
+CASE16: Install Distributed Primitives app
+CASE17: Check for basic functionality with distributed primitives
+"""
+
+
+class HAsanity:
+
+ def __init__( self ):
+ self.default = ''
+
+ def CASE1( self, main ):
+ """
+ CASE1 is to compile ONOS and push it to the test machines
+
+ Startup sequence:
+ cell <name>
+ onos-verify-cell
+ NOTE: temporary - onos-remove-raft-logs
+ onos-uninstall
+ start mininet
+ git pull
+ mvn clean install
+ onos-package
+ onos-install -f
+ onos-wait-for-start
+ start cli sessions
+ start tcpdump
+ """
+ main.log.info( "ONOS HA Sanity test - initialization" )
+ main.case( "Setting up test environment" )
+ main.caseExplaination = "Setup the test environment including " +\
+ "installing ONOS, starting Mininet and ONOS" +\
+ "cli sessions."
+ # TODO: save all the timers and output them for plotting
+
+ # load some variables from the params file
+ PULLCODE = False
+ if main.params[ 'Git' ] == 'True':
+ PULLCODE = True
+ gitBranch = main.params[ 'branch' ]
+ cellName = main.params[ 'ENV' ][ 'cellName' ]
+
+ # set global variables
+ global numControllers
+ numControllers = int( main.params[ 'num_controllers' ] )
+ if main.ONOSbench.maxNodes:
+ if main.ONOSbench.maxNodes < numControllers:
+ numControllers = int( main.ONOSbench.maxNodes )
+ # TODO: refactor how to get onos port, maybe put into component tag?
+ global ONOS1Port
+ global ONOS2Port
+ global ONOS3Port
+ global ONOS4Port
+ global ONOS5Port
+ global ONOS6Port
+ global ONOS7Port
+
+ # FIXME: just get controller port from params?
+ # TODO: do we really need all these?
+ ONOS1Port = main.params[ 'CTRL' ][ 'port1' ]
+ ONOS2Port = main.params[ 'CTRL' ][ 'port2' ]
+ ONOS3Port = main.params[ 'CTRL' ][ 'port3' ]
+ ONOS4Port = main.params[ 'CTRL' ][ 'port4' ]
+ ONOS5Port = main.params[ 'CTRL' ][ 'port5' ]
+ ONOS6Port = main.params[ 'CTRL' ][ 'port6' ]
+ ONOS7Port = main.params[ 'CTRL' ][ 'port7' ]
+
+ global CLIs
+ CLIs = []
+ global nodes
+ nodes = []
+ ipList = []
+ for i in range( 1, numControllers + 1 ):
+ CLIs.append( getattr( main, 'ONOScli' + str( i ) ) )
+ nodes.append( getattr( main, 'ONOS' + str( i ) ) )
+ ipList.append( nodes[ -1 ].ip_address )
+
+ main.step( "Create cell file" )
+ cellAppString = main.params[ 'ENV' ][ 'appString' ]
+ main.ONOSbench.createCellFile( main.ONOSbench.ip_address, cellName,
+ main.Mininet1.ip_address,
+ cellAppString, ipList )
+ main.step( "Applying cell variable to environment" )
+ cellResult = main.ONOSbench.setCell( cellName )
+ verifyResult = main.ONOSbench.verifyCell()
+
+ # FIXME:this is short term fix
+ main.log.info( "Removing raft logs" )
+ main.ONOSbench.onosRemoveRaftLogs()
+
+ main.log.info( "Uninstalling ONOS" )
+ for node in nodes:
+ main.ONOSbench.onosUninstall( node.ip_address )
+
+ # Make sure ONOS is DEAD
+ main.log.info( "Killing any ONOS processes" )
+ killResults = main.TRUE
+ for node in nodes:
+ killed = main.ONOSbench.onosKill( node.ip_address )
+ killResults = killResults and killed
+
+ cleanInstallResult = main.TRUE
+ gitPullResult = main.TRUE
+
+ main.step( "Starting Mininet" )
+ # scp topo file to mininet
+ # TODO: move to params?
+ topoName = "obelisk.py"
+ filePath = main.ONOSbench.home + "/tools/test/topos/"
+ main.ONOSbench.copyMininetFile( topoName, filePath,
+ main.Mininet1.user_name,
+ main.Mininet1.ip_address )
+ mnResult = main.Mininet1.startNet( )
+ utilities.assert_equals( expect=main.TRUE, actual=mnResult,
+ onpass="Mininet Started",
+ onfail="Error starting Mininet" )
+
+ main.step( "Git checkout and pull " + gitBranch )
+ if PULLCODE:
+ main.ONOSbench.gitCheckout( gitBranch )
+ gitPullResult = main.ONOSbench.gitPull()
+ # values of 1 or 3 are good
+ utilities.assert_lesser( expect=0, actual=gitPullResult,
+ onpass="Git pull successful",
+ onfail="Git pull failed" )
+ main.ONOSbench.getVersion( report=True )
+
+ main.step( "Using mvn clean install" )
+ cleanInstallResult = main.TRUE
+ if PULLCODE and gitPullResult == main.TRUE:
+ cleanInstallResult = main.ONOSbench.cleanInstall()
+ else:
+ main.log.warn( "Did not pull new code so skipping mvn " +
+ "clean install" )
+ utilities.assert_equals( expect=main.TRUE,
+ actual=cleanInstallResult,
+ onpass="MCI successful",
+ onfail="MCI failed" )
+ # GRAPHS
+ # NOTE: important params here:
+ # job = name of Jenkins job
+ # Plot Name = Plot-HA, only can be used if multiple plots
+ # index = The number of the graph under plot name
+ job = "HAsanity"
+ plotName = "Plot-HA"
+ graphs = '<ac:structured-macro ac:name="html">\n'
+ graphs += '<ac:plain-text-body><![CDATA[\n'
+ graphs += '<iframe src="https://onos-jenkins.onlab.us/job/' + job +\
+ '/plot/' + plotName + '/getPlot?index=0' +\
+ '&width=500&height=300"' +\
+ 'noborder="0" width="500" height="300" scrolling="yes" ' +\
+ 'seamless="seamless"></iframe>\n'
+ graphs += ']]></ac:plain-text-body>\n'
+ graphs += '</ac:structured-macro>\n'
+ main.log.wiki(graphs)
+
+ main.step( "Creating ONOS package" )
+ packageResult = main.ONOSbench.onosPackage()
+ utilities.assert_equals( expect=main.TRUE, actual=packageResult,
+ onpass="ONOS package successful",
+ onfail="ONOS package failed" )
+
+ main.step( "Installing ONOS package" )
+ onosInstallResult = main.TRUE
+ for node in nodes:
+ tmpResult = main.ONOSbench.onosInstall( options="-f",
+ node=node.ip_address )
+ onosInstallResult = onosInstallResult and tmpResult
+ utilities.assert_equals( expect=main.TRUE, actual=onosInstallResult,
+ onpass="ONOS install successful",
+ onfail="ONOS install failed" )
+
+ main.step( "Checking if ONOS is up yet" )
+ for i in range( 2 ):
+ onosIsupResult = main.TRUE
+ for node in nodes:
+ started = main.ONOSbench.isup( node.ip_address )
+ if not started:
+ main.log.error( node.name + " didn't start!" )
+ main.ONOSbench.onosStop( node.ip_address )
+ main.ONOSbench.onosStart( node.ip_address )
+ onosIsupResult = onosIsupResult and started
+ if onosIsupResult == main.TRUE:
+ break
+ utilities.assert_equals( expect=main.TRUE, actual=onosIsupResult,
+ onpass="ONOS startup successful",
+ onfail="ONOS startup failed" )
+
+ main.log.step( "Starting ONOS CLI sessions" )
+ cliResults = main.TRUE
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].startOnosCli,
+ name="startOnosCli-" + str( i ),
+ args=[nodes[i].ip_address] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ cliResults = cliResults and t.result
+ utilities.assert_equals( expect=main.TRUE, actual=cliResults,
+ onpass="ONOS cli startup successful",
+ onfail="ONOS cli startup failed" )
+
+ if main.params[ 'tcpdump' ].lower() == "true":
+ main.step( "Start Packet Capture MN" )
+ main.Mininet2.startTcpdump(
+ str( main.params[ 'MNtcpdump' ][ 'folder' ] ) + str( main.TEST )
+ + "-MN.pcap",
+ intf=main.params[ 'MNtcpdump' ][ 'intf' ],
+ port=main.params[ 'MNtcpdump' ][ 'port' ] )
+
+ main.step( "App Ids check" )
+ appCheck = main.TRUE
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].appToIDCheck,
+ name="appToIDCheck-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ appCheck = appCheck and t.result
+ if appCheck != main.TRUE:
+ main.log.warn( CLIs[0].apps() )
+ main.log.warn( CLIs[0].appIDs() )
+ utilities.assert_equals( expect=main.TRUE, actual=appCheck,
+ onpass="App Ids seem to be correct",
+ onfail="Something is wrong with app Ids" )
+
+ if cliResults == main.FALSE:
+ main.log.error( "Failed to start ONOS, stopping test" )
+ main.cleanup()
+ main.exit()
+
+ def CASE2( self, main ):
+ """
+ Assign devices to controllers
+ """
+ import re
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+ assert ONOS1Port, "ONOS1Port not defined"
+ assert ONOS2Port, "ONOS2Port not defined"
+ assert ONOS3Port, "ONOS3Port not defined"
+ assert ONOS4Port, "ONOS4Port not defined"
+ assert ONOS5Port, "ONOS5Port not defined"
+ assert ONOS6Port, "ONOS6Port not defined"
+ assert ONOS7Port, "ONOS7Port not defined"
+
+ main.case( "Assigning devices to controllers" )
+ main.caseExplaination = "Assign switches to ONOS using 'ovs-vsctl' " +\
+ "and check that an ONOS node becomes the " +\
+ "master of the device."
+ main.step( "Assign switches to controllers" )
+
+ ipList = []
+ for i in range( numControllers ):
+ ipList.append( nodes[ i ].ip_address )
+ swList = []
+ for i in range( 1, 29 ):
+ swList.append( "s" + str( i ) )
+ main.Mininet1.assignSwController( sw=swList, ip=ipList )
+
+ mastershipCheck = main.TRUE
+ for i in range( 1, 29 ):
+ response = main.Mininet1.getSwController( "s" + str( i ) )
+ try:
+ main.log.info( str( response ) )
+ except Exception:
+ main.log.info( repr( response ) )
+ for node in nodes:
+ if re.search( "tcp:" + node.ip_address, response ):
+ mastershipCheck = mastershipCheck and main.TRUE
+ else:
+ main.log.error( "Error, node " + node.ip_address + " is " +
+ "not in the list of controllers s" +
+ str( i ) + " is connecting to." )
+ mastershipCheck = main.FALSE
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=mastershipCheck,
+ onpass="Switch mastership assigned correctly",
+ onfail="Switches not assigned correctly to controllers" )
+
+ def CASE21( self, main ):
+ """
+ Assign mastership to controllers
+ """
+ import re
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+ assert ONOS1Port, "ONOS1Port not defined"
+ assert ONOS2Port, "ONOS2Port not defined"
+ assert ONOS3Port, "ONOS3Port not defined"
+ assert ONOS4Port, "ONOS4Port not defined"
+ assert ONOS5Port, "ONOS5Port not defined"
+ assert ONOS6Port, "ONOS6Port not defined"
+ assert ONOS7Port, "ONOS7Port not defined"
+
+ main.case( "Assigning Controller roles for switches" )
+ main.caseExplaination = "Check that ONOS is connected to each " +\
+ "device. Then manually assign" +\
+ " mastership to specific ONOS nodes using" +\
+ " 'device-role'"
+ main.step( "Assign mastership of switches to specific controllers" )
+ # Manually assign mastership to the controller we want
+ roleCall = main.TRUE
+
+ ipList = [ ]
+ deviceList = []
+ try:
+ # Assign mastership to specific controllers. This assignment was
+ # determined for a 7 node cluser, but will work with any sized
+ # cluster
+ for i in range( 1, 29 ): # switches 1 through 28
+ # set up correct variables:
+ if i == 1:
+ c = 0
+ ip = nodes[ c ].ip_address # ONOS1
+ deviceId = main.ONOScli1.getDevice( "1000" ).get( 'id' )
+ elif i == 2:
+ c = 1 % numControllers
+ ip = nodes[ c ].ip_address # ONOS2
+ deviceId = main.ONOScli1.getDevice( "2000" ).get( 'id' )
+ elif i == 3:
+ c = 1 % numControllers
+ ip = nodes[ c ].ip_address # ONOS2
+ deviceId = main.ONOScli1.getDevice( "3000" ).get( 'id' )
+ elif i == 4:
+ c = 3 % numControllers
+ ip = nodes[ c ].ip_address # ONOS4
+ deviceId = main.ONOScli1.getDevice( "3004" ).get( 'id' )
+ elif i == 5:
+ c = 2 % numControllers
+ ip = nodes[ c ].ip_address # ONOS3
+ deviceId = main.ONOScli1.getDevice( "5000" ).get( 'id' )
+ elif i == 6:
+ c = 2 % numControllers
+ ip = nodes[ c ].ip_address # ONOS3
+ deviceId = main.ONOScli1.getDevice( "6000" ).get( 'id' )
+ elif i == 7:
+ c = 5 % numControllers
+ ip = nodes[ c ].ip_address # ONOS6
+ deviceId = main.ONOScli1.getDevice( "6007" ).get( 'id' )
+ elif i >= 8 and i <= 17:
+ c = 4 % numControllers
+ ip = nodes[ c ].ip_address # ONOS5
+ dpid = '3' + str( i ).zfill( 3 )
+ deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' )
+ elif i >= 18 and i <= 27:
+ c = 6 % numControllers
+ ip = nodes[ c ].ip_address # ONOS7
+ dpid = '6' + str( i ).zfill( 3 )
+ deviceId = main.ONOScli1.getDevice( dpid ).get( 'id' )
+ elif i == 28:
+ c = 0
+ ip = nodes[ c ].ip_address # ONOS1
+ deviceId = main.ONOScli1.getDevice( "2800" ).get( 'id' )
+ else:
+ main.log.error( "You didn't write an else statement for " +
+ "switch s" + str( i ) )
+ roleCall = main.FALSE
+ # Assign switch
+ assert deviceId, "No device id for s" + str( i ) + " in ONOS"
+ # TODO: make this controller dynamic
+ roleCall = roleCall and main.ONOScli1.deviceRole( deviceId,
+ ip )
+ ipList.append( ip )
+ deviceList.append( deviceId )
+ except ( AttributeError, AssertionError ):
+ main.log.exception( "Something is wrong with ONOS device view" )
+ main.log.info( main.ONOScli1.devices() )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=roleCall,
+ onpass="Re-assigned switch mastership to designated controller",
+ onfail="Something wrong with deviceRole calls" )
+
+ main.step( "Check mastership was correctly assigned" )
+ roleCheck = main.TRUE
+ # NOTE: This is due to the fact that device mastership change is not
+ # atomic and is actually a multi step process
+ time.sleep( 5 )
+ for i in range( len( ipList ) ):
+ ip = ipList[i]
+ deviceId = deviceList[i]
+ # Check assignment
+ master = main.ONOScli1.getRole( deviceId ).get( 'master' )
+ if ip in master:
+ roleCheck = roleCheck and main.TRUE
+ else:
+ roleCheck = roleCheck and main.FALSE
+ main.log.error( "Error, controller " + ip + " is not" +
+ " master " + "of device " +
+ str( deviceId ) + ". Master is " +
+ repr( master ) + "." )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=roleCheck,
+ onpass="Switches were successfully reassigned to designated " +
+ "controller",
+ onfail="Switches were not successfully reassigned" )
+
+ def CASE3( self, main ):
+ """
+ Assign intents
+ """
+ import time
+ import json
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+ main.case( "Adding host Intents" )
+ main.caseExplaination = "Discover hosts by using pingall then " +\
+ "assign predetermined host-to-host intents." +\
+ " After installation, check that the intent" +\
+ " is distributed to all nodes and the state" +\
+ " is INSTALLED"
+
+ # install onos-app-fwd
+ main.step( "Install reactive forwarding app" )
+ installResults = CLIs[0].activateApp( "org.onosproject.fwd" )
+ utilities.assert_equals( expect=main.TRUE, actual=installResults,
+ onpass="Install fwd successful",
+ onfail="Install fwd failed" )
+
+ main.step( "Check app ids" )
+ appCheck = main.TRUE
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].appToIDCheck,
+ name="appToIDCheck-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ appCheck = appCheck and t.result
+ if appCheck != main.TRUE:
+ main.log.warn( CLIs[0].apps() )
+ main.log.warn( CLIs[0].appIDs() )
+ utilities.assert_equals( expect=main.TRUE, actual=appCheck,
+ onpass="App Ids seem to be correct",
+ onfail="Something is wrong with app Ids" )
+
+ main.step( "Discovering Hosts( Via pingall for now )" )
+ # FIXME: Once we have a host discovery mechanism, use that instead
+ # REACTIVE FWD test
+ pingResult = main.FALSE
+ for i in range(2): # Retry if pingall fails first time
+ time1 = time.time()
+ pingResult = main.Mininet1.pingall()
+ if i == 0:
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=pingResult,
+ onpass="Reactive Pingall test passed",
+ onfail="Reactive Pingall failed, " +
+ "one or more ping pairs failed" )
+ time2 = time.time()
+ main.log.info( "Time for pingall: %2f seconds" %
+ ( time2 - time1 ) )
+ # timeout for fwd flows
+ time.sleep( 11 )
+ # uninstall onos-app-fwd
+ main.step( "Uninstall reactive forwarding app" )
+ uninstallResult = CLIs[0].deactivateApp( "org.onosproject.fwd" )
+ utilities.assert_equals( expect=main.TRUE, actual=uninstallResult,
+ onpass="Uninstall fwd successful",
+ onfail="Uninstall fwd failed" )
+ '''
+ main.Mininet1.handle.sendline( "py [ h.cmd( \"arping -c 1 10.1.1.1 \" ) for h in net.hosts ] ")
+ import time
+ time.sleep(60)
+ '''
+
+ main.step( "Check app ids" )
+ threads = []
+ appCheck2 = main.TRUE
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].appToIDCheck,
+ name="appToIDCheck-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ appCheck2 = appCheck2 and t.result
+ if appCheck2 != main.TRUE:
+ main.log.warn( CLIs[0].apps() )
+ main.log.warn( CLIs[0].appIDs() )
+ utilities.assert_equals( expect=main.TRUE, actual=appCheck2,
+ onpass="App Ids seem to be correct",
+ onfail="Something is wrong with app Ids" )
+
+ main.step( "Add host intents via cli" )
+ intentIds = []
+ # TODO: move the host numbers to params
+ # Maybe look at all the paths we ping?
+ intentAddResult = True
+ hostResult = main.TRUE
+ for i in range( 8, 18 ):
+ main.log.info( "Adding host intent between h" + str( i ) +
+ " and h" + str( i + 10 ) )
+ host1 = "00:00:00:00:00:" + \
+ str( hex( i )[ 2: ] ).zfill( 2 ).upper()
+ host2 = "00:00:00:00:00:" + \
+ str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper()
+ # NOTE: getHost can return None
+ host1Dict = main.ONOScli1.getHost( host1 )
+ host2Dict = main.ONOScli1.getHost( host2 )
+ host1Id = None
+ host2Id = None
+ if host1Dict and host2Dict:
+ host1Id = host1Dict.get( 'id', None )
+ host2Id = host2Dict.get( 'id', None )
+ if host1Id and host2Id:
+ nodeNum = ( i % numControllers )
+ tmpId = CLIs[ nodeNum ].addHostIntent( host1Id, host2Id )
+ if tmpId:
+ main.log.info( "Added intent with id: " + tmpId )
+ intentIds.append( tmpId )
+ else:
+ main.log.error( "addHostIntent returned: " +
+ repr( tmpId ) )
+ else:
+ main.log.error( "Error, getHost() failed for h" + str( i ) +
+ " and/or h" + str( i + 10 ) )
+ hosts = CLIs[ 0 ].hosts()
+ main.log.warn( "Hosts output: " )
+ try:
+ main.log.warn( json.dumps( json.loads( hosts ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.warn( repr( hosts ) )
+ hostResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE, actual=hostResult,
+ onpass="Found a host id for each host",
+ onfail="Error looking up host ids" )
+
+ intentStart = time.time()
+ onosIds = main.ONOScli1.getAllIntentsId()
+ main.log.info( "Submitted intents: " + str( intentIds ) )
+ main.log.info( "Intents in ONOS: " + str( onosIds ) )
+ for intent in intentIds:
+ if intent in onosIds:
+ pass # intent submitted is in onos
+ else:
+ intentAddResult = False
+ if intentAddResult:
+ intentStop = time.time()
+ else:
+ intentStop = None
+ # Print the intent states
+ intents = main.ONOScli1.intents()
+ intentStates = []
+ installedCheck = True
+ main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
+ count = 0
+ try:
+ for intent in json.loads( intents ):
+ state = intent.get( 'state', None )
+ if "INSTALLED" not in state:
+ installedCheck = False
+ intentId = intent.get( 'id', None )
+ intentStates.append( ( intentId, state ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing intents" )
+ # add submitted intents not in the store
+ tmplist = [ i for i, s in intentStates ]
+ missingIntents = False
+ for i in intentIds:
+ if i not in tmplist:
+ intentStates.append( ( i, " - " ) )
+ missingIntents = True
+ intentStates.sort()
+ for i, s in intentStates:
+ count += 1
+ main.log.info( "%-6s%-15s%-15s" %
+ ( str( count ), str( i ), str( s ) ) )
+ leaders = main.ONOScli1.leaders()
+ try:
+ missing = False
+ if leaders:
+ parsedLeaders = json.loads( leaders )
+ main.log.warn( json.dumps( parsedLeaders,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # check for all intent partitions
+ topics = []
+ for i in range( 14 ):
+ topics.append( "intent-partition-" + str( i ) )
+ main.log.debug( topics )
+ ONOStopics = [ j['topic'] for j in parsedLeaders ]
+ for topic in topics:
+ if topic not in ONOStopics:
+ main.log.error( "Error: " + topic +
+ " not in leaders" )
+ missing = True
+ else:
+ main.log.error( "leaders() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing leaders" )
+ main.log.error( repr( leaders ) )
+ # Check all nodes
+ if missing:
+ for node in CLIs:
+ response = node.leaders( jsonFormat=False)
+ main.log.warn( str( node.name ) + " leaders output: \n" +
+ str( response ) )
+
+ partitions = main.ONOScli1.partitions()
+ try:
+ if partitions :
+ parsedPartitions = json.loads( partitions )
+ main.log.warn( json.dumps( parsedPartitions,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check for a leader in all paritions
+ # TODO check for consistency among nodes
+ else:
+ main.log.error( "partitions() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing partitions" )
+ main.log.error( repr( partitions ) )
+ pendingMap = main.ONOScli1.pendingMap()
+ try:
+ if pendingMap :
+ parsedPending = json.loads( pendingMap )
+ main.log.warn( json.dumps( parsedPending,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check something here?
+ else:
+ main.log.error( "pendingMap() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing pending map" )
+ main.log.error( repr( pendingMap ) )
+
+ intentAddResult = bool( intentAddResult and not missingIntents and
+ installedCheck )
+ if not intentAddResult:
+ main.log.error( "Error in pushing host intents to ONOS" )
+
+ main.step( "Intent Anti-Entropy dispersion" )
+ for i in range(100):
+ correct = True
+ main.log.info( "Submitted intents: " + str( sorted( intentIds ) ) )
+ for cli in CLIs:
+ onosIds = []
+ ids = cli.getAllIntentsId()
+ onosIds.append( ids )
+ main.log.debug( "Intents in " + cli.name + ": " +
+ str( sorted( onosIds ) ) )
+ if sorted( ids ) != sorted( intentIds ):
+ main.log.warn( "Set of intent IDs doesn't match" )
+ correct = False
+ break
+ else:
+ intents = json.loads( cli.intents() )
+ for intent in intents:
+ if intent[ 'state' ] != "INSTALLED":
+ main.log.warn( "Intent " + intent[ 'id' ] +
+ " is " + intent[ 'state' ] )
+ correct = False
+ break
+ if correct:
+ break
+ else:
+ time.sleep(1)
+ if not intentStop:
+ intentStop = time.time()
+ global gossipTime
+ gossipTime = intentStop - intentStart
+ main.log.info( "It took about " + str( gossipTime ) +
+ " seconds for all intents to appear in each node" )
+ # FIXME: make this time configurable/calculate based off of number of
+ # nodes and gossip rounds
+ utilities.assert_greater_equals(
+ expect=40, actual=gossipTime,
+ onpass="ECM anti-entropy for intents worked within " +
+ "expected time",
+ onfail="Intent ECM anti-entropy took too long" )
+ if gossipTime <= 40:
+ intentAddResult = True
+
+ if not intentAddResult or "key" in pendingMap:
+ import time
+ installedCheck = True
+ main.log.info( "Sleeping 60 seconds to see if intents are found" )
+ time.sleep( 60 )
+ onosIds = main.ONOScli1.getAllIntentsId()
+ main.log.info( "Submitted intents: " + str( intentIds ) )
+ main.log.info( "Intents in ONOS: " + str( onosIds ) )
+ # Print the intent states
+ intents = main.ONOScli1.intents()
+ intentStates = []
+ main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
+ count = 0
+ try:
+ for intent in json.loads( intents ):
+ # Iter through intents of a node
+ state = intent.get( 'state', None )
+ if "INSTALLED" not in state:
+ installedCheck = False
+ intentId = intent.get( 'id', None )
+ intentStates.append( ( intentId, state ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing intents" )
+ # add submitted intents not in the store
+ tmplist = [ i for i, s in intentStates ]
+ for i in intentIds:
+ if i not in tmplist:
+ intentStates.append( ( i, " - " ) )
+ intentStates.sort()
+ for i, s in intentStates:
+ count += 1
+ main.log.info( "%-6s%-15s%-15s" %
+ ( str( count ), str( i ), str( s ) ) )
+ leaders = main.ONOScli1.leaders()
+ try:
+ missing = False
+ if leaders:
+ parsedLeaders = json.loads( leaders )
+ main.log.warn( json.dumps( parsedLeaders,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # check for all intent partitions
+ # check for election
+ topics = []
+ for i in range( 14 ):
+ topics.append( "intent-partition-" + str( i ) )
+ # FIXME: this should only be after we start the app
+ topics.append( "org.onosproject.election" )
+ main.log.debug( topics )
+ ONOStopics = [ j['topic'] for j in parsedLeaders ]
+ for topic in topics:
+ if topic not in ONOStopics:
+ main.log.error( "Error: " + topic +
+ " not in leaders" )
+ missing = True
+ else:
+ main.log.error( "leaders() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing leaders" )
+ main.log.error( repr( leaders ) )
+ # Check all nodes
+ if missing:
+ for node in CLIs:
+ response = node.leaders( jsonFormat=False)
+ main.log.warn( str( node.name ) + " leaders output: \n" +
+ str( response ) )
+
+ partitions = main.ONOScli1.partitions()
+ try:
+ if partitions :
+ parsedPartitions = json.loads( partitions )
+ main.log.warn( json.dumps( parsedPartitions,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check for a leader in all paritions
+ # TODO check for consistency among nodes
+ else:
+ main.log.error( "partitions() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing partitions" )
+ main.log.error( repr( partitions ) )
+ pendingMap = main.ONOScli1.pendingMap()
+ try:
+ if pendingMap :
+ parsedPending = json.loads( pendingMap )
+ main.log.warn( json.dumps( parsedPending,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check something here?
+ else:
+ main.log.error( "pendingMap() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing pending map" )
+ main.log.error( repr( pendingMap ) )
+
+ def CASE4( self, main ):
+ """
+ Ping across added host intents
+ """
+ import json
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+ main.case( "Verify connectivity by sendind traffic across Intents" )
+ main.caseExplaination = "Ping across added host intents to check " +\
+ "functionality and check the state of " +\
+ "the intent"
+ main.step( "Ping across added host intents" )
+ PingResult = main.TRUE
+ for i in range( 8, 18 ):
+ ping = main.Mininet1.pingHost( src="h" + str( i ),
+ target="h" + str( i + 10 ) )
+ PingResult = PingResult and ping
+ if ping == main.FALSE:
+ main.log.warn( "Ping failed between h" + str( i ) +
+ " and h" + str( i + 10 ) )
+ elif ping == main.TRUE:
+ main.log.info( "Ping test passed!" )
+ # Don't set PingResult or you'd override failures
+ if PingResult == main.FALSE:
+ main.log.error(
+ "Intents have not been installed correctly, pings failed." )
+ # TODO: pretty print
+ main.log.warn( "ONOS1 intents: " )
+ try:
+ tmpIntents = main.ONOScli1.intents()
+ main.log.warn( json.dumps( json.loads( tmpIntents ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.warn( repr( tmpIntents ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=PingResult,
+ onpass="Intents have been installed correctly and pings work",
+ onfail="Intents have not been installed correctly, pings failed." )
+
+ main.step( "Check Intent state" )
+ installedCheck = False
+ loopCount = 0
+ while not installedCheck and loopCount < 40:
+ installedCheck = True
+ # Print the intent states
+ intents = main.ONOScli1.intents()
+ intentStates = []
+ main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
+ count = 0
+ # Iter through intents of a node
+ try:
+ for intent in json.loads( intents ):
+ state = intent.get( 'state', None )
+ if "INSTALLED" not in state:
+ installedCheck = False
+ intentId = intent.get( 'id', None )
+ intentStates.append( ( intentId, state ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing intents." )
+ # Print states
+ intentStates.sort()
+ for i, s in intentStates:
+ count += 1
+ main.log.info( "%-6s%-15s%-15s" %
+ ( str( count ), str( i ), str( s ) ) )
+ if not installedCheck:
+ time.sleep( 1 )
+ loopCount += 1
+ utilities.assert_equals( expect=True, actual=installedCheck,
+ onpass="Intents are all INSTALLED",
+ onfail="Intents are not all in " +
+ "INSTALLED state" )
+
+ main.step( "Check leadership of topics" )
+ leaders = main.ONOScli1.leaders()
+ topicCheck = main.TRUE
+ try:
+ if leaders:
+ parsedLeaders = json.loads( leaders )
+ main.log.warn( json.dumps( parsedLeaders,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # check for all intent partitions
+ # check for election
+ # TODO: Look at Devices as topics now that it uses this system
+ topics = []
+ for i in range( 14 ):
+ topics.append( "intent-partition-" + str( i ) )
+ # FIXME: this should only be after we start the app
+ # FIXME: topics.append( "org.onosproject.election" )
+ # Print leaders output
+ main.log.debug( topics )
+ ONOStopics = [ j['topic'] for j in parsedLeaders ]
+ for topic in topics:
+ if topic not in ONOStopics:
+ main.log.error( "Error: " + topic +
+ " not in leaders" )
+ topicCheck = main.FALSE
+ else:
+ main.log.error( "leaders() returned None" )
+ topicCheck = main.FALSE
+ except ( ValueError, TypeError ):
+ topicCheck = main.FALSE
+ main.log.exception( "Error parsing leaders" )
+ main.log.error( repr( leaders ) )
+ # TODO: Check for a leader of these topics
+ # Check all nodes
+ if topicCheck:
+ for node in CLIs:
+ response = node.leaders( jsonFormat=False)
+ main.log.warn( str( node.name ) + " leaders output: \n" +
+ str( response ) )
+
+ utilities.assert_equals( expect=main.TRUE, actual=topicCheck,
+ onpass="intent Partitions is in leaders",
+ onfail="Some topics were lost " )
+ # Print partitions
+ partitions = main.ONOScli1.partitions()
+ try:
+ if partitions :
+ parsedPartitions = json.loads( partitions )
+ main.log.warn( json.dumps( parsedPartitions,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check for a leader in all paritions
+ # TODO check for consistency among nodes
+ else:
+ main.log.error( "partitions() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing partitions" )
+ main.log.error( repr( partitions ) )
+ # Print Pending Map
+ pendingMap = main.ONOScli1.pendingMap()
+ try:
+ if pendingMap :
+ parsedPending = json.loads( pendingMap )
+ main.log.warn( json.dumps( parsedPending,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check something here?
+ else:
+ main.log.error( "pendingMap() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing pending map" )
+ main.log.error( repr( pendingMap ) )
+
+ if not installedCheck:
+ main.log.info( "Waiting 60 seconds to see if the state of " +
+ "intents change" )
+ time.sleep( 60 )
+ # Print the intent states
+ intents = main.ONOScli1.intents()
+ intentStates = []
+ main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
+ count = 0
+ # Iter through intents of a node
+ try:
+ for intent in json.loads( intents ):
+ state = intent.get( 'state', None )
+ if "INSTALLED" not in state:
+ installedCheck = False
+ intentId = intent.get( 'id', None )
+ intentStates.append( ( intentId, state ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing intents." )
+ intentStates.sort()
+ for i, s in intentStates:
+ count += 1
+ main.log.info( "%-6s%-15s%-15s" %
+ ( str( count ), str( i ), str( s ) ) )
+ leaders = main.ONOScli1.leaders()
+ try:
+ missing = False
+ if leaders:
+ parsedLeaders = json.loads( leaders )
+ main.log.warn( json.dumps( parsedLeaders,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # check for all intent partitions
+ # check for election
+ topics = []
+ for i in range( 14 ):
+ topics.append( "intent-partition-" + str( i ) )
+ # FIXME: this should only be after we start the app
+ topics.append( "org.onosproject.election" )
+ main.log.debug( topics )
+ ONOStopics = [ j['topic'] for j in parsedLeaders ]
+ for topic in topics:
+ if topic not in ONOStopics:
+ main.log.error( "Error: " + topic +
+ " not in leaders" )
+ missing = True
+ else:
+ main.log.error( "leaders() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing leaders" )
+ main.log.error( repr( leaders ) )
+ if missing:
+ for node in CLIs:
+ response = node.leaders( jsonFormat=False)
+ main.log.warn( str( node.name ) + " leaders output: \n" +
+ str( response ) )
+
+ partitions = main.ONOScli1.partitions()
+ try:
+ if partitions :
+ parsedPartitions = json.loads( partitions )
+ main.log.warn( json.dumps( parsedPartitions,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check for a leader in all paritions
+ # TODO check for consistency among nodes
+ else:
+ main.log.error( "partitions() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing partitions" )
+ main.log.error( repr( partitions ) )
+ pendingMap = main.ONOScli1.pendingMap()
+ try:
+ if pendingMap :
+ parsedPending = json.loads( pendingMap )
+ main.log.warn( json.dumps( parsedPending,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check something here?
+ else:
+ main.log.error( "pendingMap() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing pending map" )
+ main.log.error( repr( pendingMap ) )
+ # Print flowrules
+ main.log.debug( CLIs[0].flows( jsonFormat=False ) )
+ main.step( "Wait a minute then ping again" )
+ # the wait is above
+ PingResult = main.TRUE
+ for i in range( 8, 18 ):
+ ping = main.Mininet1.pingHost( src="h" + str( i ),
+ target="h" + str( i + 10 ) )
+ PingResult = PingResult and ping
+ if ping == main.FALSE:
+ main.log.warn( "Ping failed between h" + str( i ) +
+ " and h" + str( i + 10 ) )
+ elif ping == main.TRUE:
+ main.log.info( "Ping test passed!" )
+ # Don't set PingResult or you'd override failures
+ if PingResult == main.FALSE:
+ main.log.error(
+ "Intents have not been installed correctly, pings failed." )
+ # TODO: pretty print
+ main.log.warn( "ONOS1 intents: " )
+ try:
+ tmpIntents = main.ONOScli1.intents()
+ main.log.warn( json.dumps( json.loads( tmpIntents ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.warn( repr( tmpIntents ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=PingResult,
+ onpass="Intents have been installed correctly and pings work",
+ onfail="Intents have not been installed correctly, pings failed." )
+
+ def CASE5( self, main ):
+ """
+ Reading state of ONOS
+ """
+ import json
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+
+ main.case( "Setting up and gathering data for current state" )
+ # The general idea for this test case is to pull the state of
+ # ( intents,flows, topology,... ) from each ONOS node
+ # We can then compare them with each other and also with past states
+
+ main.step( "Check that each switch has a master" )
+ global mastershipState
+ mastershipState = '[]'
+
+ # Assert that each device has a master
+ rolesNotNull = main.TRUE
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].rolesNotNull,
+ name="rolesNotNull-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ rolesNotNull = rolesNotNull and t.result
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=rolesNotNull,
+ onpass="Each device has a master",
+ onfail="Some devices don't have a master assigned" )
+
+ main.step( "Get the Mastership of each switch from each controller" )
+ ONOSMastership = []
+ mastershipCheck = main.FALSE
+ consistentMastership = True
+ rolesResults = True
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].roles,
+ name="roles-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ONOSMastership.append( t.result )
+
+ for i in range( numControllers ):
+ if not ONOSMastership[i] or "Error" in ONOSMastership[i]:
+ main.log.error( "Error in getting ONOS" + str( i + 1 ) +
+ " roles" )
+ main.log.warn(
+ "ONOS" + str( i + 1 ) + " mastership response: " +
+ repr( ONOSMastership[i] ) )
+ rolesResults = False
+ utilities.assert_equals(
+ expect=True,
+ actual=rolesResults,
+ onpass="No error in reading roles output",
+ onfail="Error in reading roles from ONOS" )
+
+ main.step( "Check for consistency in roles from each controller" )
+ if all([ i == ONOSMastership[ 0 ] for i in ONOSMastership ] ):
+ main.log.info(
+ "Switch roles are consistent across all ONOS nodes" )
+ else:
+ consistentMastership = False
+ utilities.assert_equals(
+ expect=True,
+ actual=consistentMastership,
+ onpass="Switch roles are consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of switch roles" )
+
+ if rolesResults and not consistentMastership:
+ for i in range( numControllers ):
+ try:
+ main.log.warn(
+ "ONOS" + str( i + 1 ) + " roles: ",
+ json.dumps(
+ json.loads( ONOSMastership[ i ] ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.warn( repr( ONOSMastership[ i ] ) )
+ elif rolesResults and consistentMastership:
+ mastershipCheck = main.TRUE
+ mastershipState = ONOSMastership[ 0 ]
+
+ main.step( "Get the intents from each controller" )
+ global intentState
+ intentState = []
+ ONOSIntents = []
+ intentCheck = main.FALSE
+ consistentIntents = True
+ intentsResults = True
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].intents,
+ name="intents-" + str( i ),
+ args=[],
+ kwargs={ 'jsonFormat': True } )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ONOSIntents.append( t.result )
+
+ for i in range( numControllers ):
+ if not ONOSIntents[ i ] or "Error" in ONOSIntents[ i ]:
+ main.log.error( "Error in getting ONOS" + str( i + 1 ) +
+ " intents" )
+ main.log.warn( "ONOS" + str( i + 1 ) + " intents response: " +
+ repr( ONOSIntents[ i ] ) )
+ intentsResults = False
+ utilities.assert_equals(
+ expect=True,
+ actual=intentsResults,
+ onpass="No error in reading intents output",
+ onfail="Error in reading intents from ONOS" )
+
+ main.step( "Check for consistency in Intents from each controller" )
+ if all([ sorted( i ) == sorted( ONOSIntents[ 0 ] ) for i in ONOSIntents ] ):
+ main.log.info( "Intents are consistent across all ONOS " +
+ "nodes" )
+ else:
+ consistentIntents = False
+ main.log.error( "Intents not consistent" )
+ utilities.assert_equals(
+ expect=True,
+ actual=consistentIntents,
+ onpass="Intents are consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of intents" )
+
+ if intentsResults:
+ # Try to make it easy to figure out what is happening
+ #
+ # Intent ONOS1 ONOS2 ...
+ # 0x01 INSTALLED INSTALLING
+ # ... ... ...
+ # ... ... ...
+ title = " Id"
+ for n in range( numControllers ):
+ title += " " * 10 + "ONOS" + str( n + 1 )
+ main.log.warn( title )
+ keys = []
+ try:
+ # Get the set of all intent keys
+ for nodeStr in ONOSIntents:
+ node = json.loads( nodeStr )
+ for intent in node:
+ keys.append( intent.get( 'id' ) )
+ keys = set( keys )
+ # For each intent key, print the state on each node
+ for key in keys:
+ row = "%-13s" % key
+ for nodeStr in ONOSIntents:
+ node = json.loads( nodeStr )
+ for intent in node:
+ if intent.get( 'id', "Error" ) == key:
+ row += "%-15s" % intent.get( 'state' )
+ main.log.warn( row )
+ # End of intent state table
+ except ValueError as e:
+ main.log.exception( e )
+ main.log.debug( "nodeStr was: " + repr( nodeStr ) )
+
+ if intentsResults and not consistentIntents:
+ # print the json objects
+ n = len(ONOSIntents)
+ main.log.debug( "ONOS" + str( n ) + " intents: " )
+ main.log.debug( json.dumps( json.loads( ONOSIntents[ -1 ] ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ for i in range( numControllers ):
+ if ONOSIntents[ i ] != ONOSIntents[ -1 ]:
+ main.log.debug( "ONOS" + str( i + 1 ) + " intents: " )
+ main.log.debug( json.dumps( json.loads( ONOSIntents[i] ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ else:
+ main.log.debug( nodes[ i ].name + " intents match ONOS" +
+ str( n ) + " intents" )
+ elif intentsResults and consistentIntents:
+ intentCheck = main.TRUE
+ intentState = ONOSIntents[ 0 ]
+
+ main.step( "Get the flows from each controller" )
+ global flowState
+ flowState = []
+ ONOSFlows = []
+ ONOSFlowsJson = []
+ flowCheck = main.FALSE
+ consistentFlows = True
+ flowsResults = True
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].flows,
+ name="flows-" + str( i ),
+ args=[],
+ kwargs={ 'jsonFormat': True } )
+ threads.append( t )
+ t.start()
+
+ # NOTE: Flows command can take some time to run
+ time.sleep(30)
+ for t in threads:
+ t.join()
+ result = t.result
+ ONOSFlows.append( result )
+
+ for i in range( numControllers ):
+ num = str( i + 1 )
+ if not ONOSFlows[ i ] or "Error" in ONOSFlows[ i ]:
+ main.log.error( "Error in getting ONOS" + num + " flows" )
+ main.log.warn( "ONOS" + num + " flows response: " +
+ repr( ONOSFlows[ i ] ) )
+ flowsResults = False
+ ONOSFlowsJson.append( None )
+ else:
+ try:
+ ONOSFlowsJson.append( json.loads( ONOSFlows[ i ] ) )
+ except ( ValueError, TypeError ):
+ # FIXME: change this to log.error?
+ main.log.exception( "Error in parsing ONOS" + num +
+ " response as json." )
+ main.log.error( repr( ONOSFlows[ i ] ) )
+ ONOSFlowsJson.append( None )
+ flowsResults = False
+ utilities.assert_equals(
+ expect=True,
+ actual=flowsResults,
+ onpass="No error in reading flows output",
+ onfail="Error in reading flows from ONOS" )
+
+ main.step( "Check for consistency in Flows from each controller" )
+ tmp = [ len( i ) == len( ONOSFlowsJson[ 0 ] ) for i in ONOSFlowsJson ]
+ if all( tmp ):
+ main.log.info( "Flow count is consistent across all ONOS nodes" )
+ else:
+ consistentFlows = False
+ utilities.assert_equals(
+ expect=True,
+ actual=consistentFlows,
+ onpass="The flow count is consistent across all ONOS nodes",
+ onfail="ONOS nodes have different flow counts" )
+
+ if flowsResults and not consistentFlows:
+ for i in range( numControllers ):
+ try:
+ main.log.warn(
+ "ONOS" + str( i + 1 ) + " flows: " +
+ json.dumps( json.loads( ONOSFlows[i] ), sort_keys=True,
+ indent=4, separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.warn(
+ "ONOS" + str( i + 1 ) + " flows: " +
+ repr( ONOSFlows[ i ] ) )
+ elif flowsResults and consistentFlows:
+ flowCheck = main.TRUE
+ flowState = ONOSFlows[ 0 ]
+
+ main.step( "Get the OF Table entries" )
+ global flows
+ flows = []
+ for i in range( 1, 29 ):
+ flows.append( main.Mininet2.getFlowTable( 1.3, "s" + str( i ) ) )
+ if flowCheck == main.FALSE:
+ for table in flows:
+ main.log.warn( table )
+ # TODO: Compare switch flow tables with ONOS flow tables
+
+ main.step( "Start continuous pings" )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source1' ],
+ target=main.params[ 'PING' ][ 'target1' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source2' ],
+ target=main.params[ 'PING' ][ 'target2' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source3' ],
+ target=main.params[ 'PING' ][ 'target3' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source4' ],
+ target=main.params[ 'PING' ][ 'target4' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source5' ],
+ target=main.params[ 'PING' ][ 'target5' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source6' ],
+ target=main.params[ 'PING' ][ 'target6' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source7' ],
+ target=main.params[ 'PING' ][ 'target7' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source8' ],
+ target=main.params[ 'PING' ][ 'target8' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source9' ],
+ target=main.params[ 'PING' ][ 'target9' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source10' ],
+ target=main.params[ 'PING' ][ 'target10' ],
+ pingTime=500 )
+
+ main.step( "Collecting topology information from ONOS" )
+ devices = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].devices,
+ name="devices-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ devices.append( t.result )
+ hosts = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].hosts,
+ name="hosts-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ try:
+ hosts.append( json.loads( t.result ) )
+ except ( ValueError, TypeError ):
+ # FIXME: better handling of this, print which node
+ # Maybe use thread name?
+ main.log.exception( "Error parsing json output of hosts" )
+ # FIXME: should this be an empty json object instead?
+ hosts.append( None )
+
+ ports = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].ports,
+ name="ports-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ports.append( t.result )
+ links = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].links,
+ name="links-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ links.append( t.result )
+ clusters = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].clusters,
+ name="clusters-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ clusters.append( t.result )
+ # Compare json objects for hosts and dataplane clusters
+
+ # hosts
+ main.step( "Host view is consistent across ONOS nodes" )
+ consistentHostsResult = main.TRUE
+ for controller in range( len( hosts ) ):
+ controllerStr = str( controller + 1 )
+ if "Error" not in hosts[ controller ]:
+ if hosts[ controller ] == hosts[ 0 ]:
+ continue
+ else: # hosts not consistent
+ main.log.error( "hosts from ONOS" +
+ controllerStr +
+ " is inconsistent with ONOS1" )
+ main.log.warn( repr( hosts[ controller ] ) )
+ consistentHostsResult = main.FALSE
+
+ else:
+ main.log.error( "Error in getting ONOS hosts from ONOS" +
+ controllerStr )
+ consistentHostsResult = main.FALSE
+ main.log.warn( "ONOS" + controllerStr +
+ " hosts response: " +
+ repr( hosts[ controller ] ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=consistentHostsResult,
+ onpass="Hosts view is consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of hosts" )
+
+ main.step( "Each host has an IP address" )
+ ipResult = main.TRUE
+ for controller in range( 0, len( hosts ) ):
+ controllerStr = str( controller + 1 )
+ for host in hosts[ controller ]:
+ if not host.get( 'ipAddresses', [ ] ):
+ main.log.error( "DEBUG:Error with host ips on controller" +
+ controllerStr + ": " + str( host ) )
+ ipResult = main.FALSE
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=ipResult,
+ onpass="The ips of the hosts aren't empty",
+ onfail="The ip of at least one host is missing" )
+
+ # Strongly connected clusters of devices
+ main.step( "Cluster view is consistent across ONOS nodes" )
+ consistentClustersResult = main.TRUE
+ for controller in range( len( clusters ) ):
+ controllerStr = str( controller + 1 )
+ if "Error" not in clusters[ controller ]:
+ if clusters[ controller ] == clusters[ 0 ]:
+ continue
+ else: # clusters not consistent
+ main.log.error( "clusters from ONOS" + controllerStr +
+ " is inconsistent with ONOS1" )
+ consistentClustersResult = main.FALSE
+
+ else:
+ main.log.error( "Error in getting dataplane clusters " +
+ "from ONOS" + controllerStr )
+ consistentClustersResult = main.FALSE
+ main.log.warn( "ONOS" + controllerStr +
+ " clusters response: " +
+ repr( clusters[ controller ] ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=consistentClustersResult,
+ onpass="Clusters view is consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of clusters" )
+ # there should always only be one cluster
+ main.step( "Cluster view correct across ONOS nodes" )
+ try:
+ numClusters = len( json.loads( clusters[ 0 ] ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing clusters[0]: " +
+ repr( clusters[ 0 ] ) )
+ clusterResults = main.FALSE
+ if numClusters == 1:
+ clusterResults = main.TRUE
+ utilities.assert_equals(
+ expect=1,
+ actual=numClusters,
+ onpass="ONOS shows 1 SCC",
+ onfail="ONOS shows " + str( numClusters ) + " SCCs" )
+
+ main.step( "Comparing ONOS topology to MN" )
+ devicesResults = main.TRUE
+ linksResults = main.TRUE
+ hostsResults = main.TRUE
+ mnSwitches = main.Mininet1.getSwitches()
+ mnLinks = main.Mininet1.getLinks()
+ mnHosts = main.Mininet1.getHosts()
+ for controller in range( numControllers ):
+ controllerStr = str( controller + 1 )
+ if devices[ controller ] and ports[ controller ] and\
+ "Error" not in devices[ controller ] and\
+ "Error" not in ports[ controller ]:
+
+ currentDevicesResult = main.Mininet1.compareSwitches(
+ mnSwitches,
+ json.loads( devices[ controller ] ),
+ json.loads( ports[ controller ] ) )
+ else:
+ currentDevicesResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentDevicesResult,
+ onpass="ONOS" + controllerStr +
+ " Switches view is correct",
+ onfail="ONOS" + controllerStr +
+ " Switches view is incorrect" )
+ if links[ controller ] and "Error" not in links[ controller ]:
+ currentLinksResult = main.Mininet1.compareLinks(
+ mnSwitches, mnLinks,
+ json.loads( links[ controller ] ) )
+ else:
+ currentLinksResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentLinksResult,
+ onpass="ONOS" + controllerStr +
+ " links view is correct",
+ onfail="ONOS" + controllerStr +
+ " links view is incorrect" )
+
+ if hosts[ controller ] or "Error" not in hosts[ controller ]:
+ currentHostsResult = main.Mininet1.compareHosts(
+ mnHosts,
+ hosts[ controller ] )
+ else:
+ currentHostsResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentHostsResult,
+ onpass="ONOS" + controllerStr +
+ " hosts exist in Mininet",
+ onfail="ONOS" + controllerStr +
+ " hosts don't match Mininet" )
+
+ devicesResults = devicesResults and currentDevicesResult
+ linksResults = linksResults and currentLinksResult
+ hostsResults = hostsResults and currentHostsResult
+
+ main.step( "Device information is correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=devicesResults,
+ onpass="Device information is correct",
+ onfail="Device information is incorrect" )
+
+ main.step( "Links are correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=linksResults,
+ onpass="Link are correct",
+ onfail="Links are incorrect" )
+
+ main.step( "Hosts are correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=hostsResults,
+ onpass="Hosts are correct",
+ onfail="Hosts are incorrect" )
+
+ def CASE6( self, main ):
+ """
+ The Failure case. Since this is the Sanity test, we do nothing.
+ """
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+ main.case( "Wait 60 seconds instead of inducing a failure" )
+ time.sleep( 60 )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=main.TRUE,
+ onpass="Sleeping 60 seconds",
+ onfail="Something is terribly wrong with my math" )
+
+ def CASE7( self, main ):
+ """
+ Check state after ONOS failure
+ """
+ import json
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+ main.case( "Running ONOS Constant State Tests" )
+
+ main.step( "Check that each switch has a master" )
+ # Assert that each device has a master
+ rolesNotNull = main.TRUE
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].rolesNotNull,
+ name="rolesNotNull-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ rolesNotNull = rolesNotNull and t.result
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=rolesNotNull,
+ onpass="Each device has a master",
+ onfail="Some devices don't have a master assigned" )
+
+ main.step( "Read device roles from ONOS" )
+ ONOSMastership = []
+ mastershipCheck = main.FALSE
+ consistentMastership = True
+ rolesResults = True
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].roles,
+ name="roles-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ONOSMastership.append( t.result )
+
+ for i in range( numControllers ):
+ if not ONOSMastership[i] or "Error" in ONOSMastership[i]:
+ main.log.error( "Error in getting ONOS" + str( i + 1 ) +
+ " roles" )
+ main.log.warn(
+ "ONOS" + str( i + 1 ) + " mastership response: " +
+ repr( ONOSMastership[i] ) )
+ rolesResults = False
+ utilities.assert_equals(
+ expect=True,
+ actual=rolesResults,
+ onpass="No error in reading roles output",
+ onfail="Error in reading roles from ONOS" )
+
+ main.step( "Check for consistency in roles from each controller" )
+ if all([ i == ONOSMastership[ 0 ] for i in ONOSMastership ] ):
+ main.log.info(
+ "Switch roles are consistent across all ONOS nodes" )
+ else:
+ consistentMastership = False
+ utilities.assert_equals(
+ expect=True,
+ actual=consistentMastership,
+ onpass="Switch roles are consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of switch roles" )
+
+ if rolesResults and not consistentMastership:
+ for i in range( numControllers ):
+ main.log.warn(
+ "ONOS" + str( i + 1 ) + " roles: ",
+ json.dumps(
+ json.loads( ONOSMastership[ i ] ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ elif rolesResults and not consistentMastership:
+ mastershipCheck = main.TRUE
+
+ description2 = "Compare switch roles from before failure"
+ main.step( description2 )
+ try:
+ currentJson = json.loads( ONOSMastership[0] )
+ oldJson = json.loads( mastershipState )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Something is wrong with parsing " +
+ "ONOSMastership[0] or mastershipState" )
+ main.log.error( "ONOSMastership[0]: " + repr( ONOSMastership[0] ) )
+ main.log.error( "mastershipState" + repr( mastershipState ) )
+ main.cleanup()
+ main.exit()
+ mastershipCheck = main.TRUE
+ for i in range( 1, 29 ):
+ switchDPID = str(
+ main.Mininet1.getSwitchDPID( switch="s" + str( i ) ) )
+ current = [ switch[ 'master' ] for switch in currentJson
+ if switchDPID in switch[ 'id' ] ]
+ old = [ switch[ 'master' ] for switch in oldJson
+ if switchDPID in switch[ 'id' ] ]
+ if current == old:
+ mastershipCheck = mastershipCheck and main.TRUE
+ else:
+ main.log.warn( "Mastership of switch %s changed" % switchDPID )
+ mastershipCheck = main.FALSE
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=mastershipCheck,
+ onpass="Mastership of Switches was not changed",
+ onfail="Mastership of some switches changed" )
+ mastershipCheck = mastershipCheck and consistentMastership
+
+ main.step( "Get the intents and compare across all nodes" )
+ ONOSIntents = []
+ intentCheck = main.FALSE
+ consistentIntents = True
+ intentsResults = True
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].intents,
+ name="intents-" + str( i ),
+ args=[],
+ kwargs={ 'jsonFormat': True } )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ONOSIntents.append( t.result )
+
+ for i in range( numControllers ):
+ if not ONOSIntents[ i ] or "Error" in ONOSIntents[ i ]:
+ main.log.error( "Error in getting ONOS" + str( i + 1 ) +
+ " intents" )
+ main.log.warn( "ONOS" + str( i + 1 ) + " intents response: " +
+ repr( ONOSIntents[ i ] ) )
+ intentsResults = False
+ utilities.assert_equals(
+ expect=True,
+ actual=intentsResults,
+ onpass="No error in reading intents output",
+ onfail="Error in reading intents from ONOS" )
+
+ main.step( "Check for consistency in Intents from each controller" )
+ if all([ sorted( i ) == sorted( ONOSIntents[ 0 ] ) for i in ONOSIntents ] ):
+ main.log.info( "Intents are consistent across all ONOS " +
+ "nodes" )
+ else:
+ consistentIntents = False
+
+ # Try to make it easy to figure out what is happening
+ #
+ # Intent ONOS1 ONOS2 ...
+ # 0x01 INSTALLED INSTALLING
+ # ... ... ...
+ # ... ... ...
+ title = " ID"
+ for n in range( numControllers ):
+ title += " " * 10 + "ONOS" + str( n + 1 )
+ main.log.warn( title )
+ # get all intent keys in the cluster
+ keys = []
+ for nodeStr in ONOSIntents:
+ node = json.loads( nodeStr )
+ for intent in node:
+ keys.append( intent.get( 'id' ) )
+ keys = set( keys )
+ for key in keys:
+ row = "%-13s" % key
+ for nodeStr in ONOSIntents:
+ node = json.loads( nodeStr )
+ for intent in node:
+ if intent.get( 'id' ) == key:
+ row += "%-15s" % intent.get( 'state' )
+ main.log.warn( row )
+ # End table view
+
+ utilities.assert_equals(
+ expect=True,
+ actual=consistentIntents,
+ onpass="Intents are consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of intents" )
+ intentStates = []
+ for node in ONOSIntents: # Iter through ONOS nodes
+ nodeStates = []
+ # Iter through intents of a node
+ try:
+ for intent in json.loads( node ):
+ nodeStates.append( intent[ 'state' ] )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error in parsing intents" )
+ main.log.error( repr( node ) )
+ intentStates.append( nodeStates )
+ out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ]
+ main.log.info( dict( out ) )
+
+ if intentsResults and not consistentIntents:
+ for i in range( numControllers ):
+ main.log.warn( "ONOS" + str( i + 1 ) + " intents: " )
+ main.log.warn( json.dumps(
+ json.loads( ONOSIntents[ i ] ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ elif intentsResults and consistentIntents:
+ intentCheck = main.TRUE
+
+ # NOTE: Store has no durability, so intents are lost across system
+ # restarts
+ main.step( "Compare current intents with intents before the failure" )
+ # NOTE: this requires case 5 to pass for intentState to be set.
+ # maybe we should stop the test if that fails?
+ sameIntents = main.FALSE
+ if intentState and intentState == ONOSIntents[ 0 ]:
+ sameIntents = main.TRUE
+ main.log.info( "Intents are consistent with before failure" )
+ # TODO: possibly the states have changed? we may need to figure out
+ # what the acceptable states are
+ elif len( intentState ) == len( ONOSIntents[ 0 ] ):
+ sameIntents = main.TRUE
+ try:
+ before = json.loads( intentState )
+ after = json.loads( ONOSIntents[ 0 ] )
+ for intent in before:
+ if intent not in after:
+ sameIntents = main.FALSE
+ main.log.debug( "Intent is not currently in ONOS " +
+ "(at least in the same form):" )
+ main.log.debug( json.dumps( intent ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Exception printing intents" )
+ main.log.debug( repr( ONOSIntents[0] ) )
+ main.log.debug( repr( intentState ) )
+ if sameIntents == main.FALSE:
+ try:
+ main.log.debug( "ONOS intents before: " )
+ main.log.debug( json.dumps( json.loads( intentState ),
+ sort_keys=True, indent=4,
+ separators=( ',', ': ' ) ) )
+ main.log.debug( "Current ONOS intents: " )
+ main.log.debug( json.dumps( json.loads( ONOSIntents[ 0 ] ),
+ sort_keys=True, indent=4,
+ separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Exception printing intents" )
+ main.log.debug( repr( ONOSIntents[0] ) )
+ main.log.debug( repr( intentState ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=sameIntents,
+ onpass="Intents are consistent with before failure",
+ onfail="The Intents changed during failure" )
+ intentCheck = intentCheck and sameIntents
+
+ main.step( "Get the OF Table entries and compare to before " +
+ "component failure" )
+ FlowTables = main.TRUE
+ flows2 = []
+ for i in range( 28 ):
+ main.log.info( "Checking flow table on s" + str( i + 1 ) )
+ tmpFlows = main.Mininet2.getFlowTable( 1.3, "s" + str( i + 1 ) )
+ flows2.append( tmpFlows )
+ tempResult = main.Mininet2.flowComp(
+ flow1=flows[ i ],
+ flow2=tmpFlows )
+ FlowTables = FlowTables and tempResult
+ if FlowTables == main.FALSE:
+ main.log.info( "Differences in flow table for switch: s" +
+ str( i + 1 ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=FlowTables,
+ onpass="No changes were found in the flow tables",
+ onfail="Changes were found in the flow tables" )
+
+ main.Mininet2.pingLongKill()
+ '''
+ main.step( "Check the continuous pings to ensure that no packets " +
+ "were dropped during component failure" )
+ main.Mininet2.pingKill( main.params[ 'TESTONUSER' ],
+ main.params[ 'TESTONIP' ] )
+ LossInPings = main.FALSE
+ # NOTE: checkForLoss returns main.FALSE with 0% packet loss
+ for i in range( 8, 18 ):
+ main.log.info(
+ "Checking for a loss in pings along flow from s" +
+ str( i ) )
+ LossInPings = main.Mininet2.checkForLoss(
+ "/tmp/ping.h" +
+ str( i ) ) or LossInPings
+ if LossInPings == main.TRUE:
+ main.log.info( "Loss in ping detected" )
+ elif LossInPings == main.ERROR:
+ main.log.info( "There are multiple mininet process running" )
+ elif LossInPings == main.FALSE:
+ main.log.info( "No Loss in the pings" )
+ main.log.info( "No loss of dataplane connectivity" )
+ utilities.assert_equals(
+ expect=main.FALSE,
+ actual=LossInPings,
+ onpass="No Loss of connectivity",
+ onfail="Loss of dataplane connectivity detected" )
+ '''
+
+ main.step( "Leadership Election is still functional" )
+ # Test of LeadershipElection
+ # NOTE: this only works for the sanity test. In case of failures,
+ # leader will likely change
+ leader = nodes[ 0 ].ip_address
+ leaderResult = main.TRUE
+ for cli in CLIs:
+ leaderN = cli.electionTestLeader()
+ # verify leader is ONOS1
+ if leaderN == leader:
+ # all is well
+ # NOTE: In failure scenario, this could be a new node, maybe
+ # check != ONOS1
+ pass
+ elif leaderN == main.FALSE:
+ # error in response
+ main.log.error( "Something is wrong with " +
+ "electionTestLeader function, check the" +
+ " error logs" )
+ leaderResult = main.FALSE
+ elif leader != leaderN:
+ leaderResult = main.FALSE
+ main.log.error( cli.name + " sees " + str( leaderN ) +
+ " as the leader of the election app. " +
+ "Leader should be " + str( leader ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=leaderResult,
+ onpass="Leadership election passed",
+ onfail="Something went wrong with Leadership election" )
+
+ def CASE8( self, main ):
+ """
+ Compare topo
+ """
+ import json
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+
+ main.case( "Compare ONOS Topology view to Mininet topology" )
+ main.caseExplaination = "Compare topology objects between Mininet" +\
+ " and ONOS"
+
+ main.step( "Comparing ONOS topology to MN" )
+ devicesResults = main.TRUE
+ linksResults = main.TRUE
+ hostsResults = main.TRUE
+ hostAttachmentResults = True
+ topoResult = main.FALSE
+ elapsed = 0
+ count = 0
+ main.step( "Collecting topology information from ONOS" )
+ startTime = time.time()
+ # Give time for Gossip to work
+ while topoResult == main.FALSE and elapsed < 60:
+ count += 1
+ cliStart = time.time()
+ devices = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].devices,
+ name="devices-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ devices.append( t.result )
+ hosts = []
+ ipResult = main.TRUE
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].hosts,
+ name="hosts-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ try:
+ hosts.append( json.loads( t.result ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing hosts results" )
+ main.log.error( repr( t.result ) )
+ for controller in range( 0, len( hosts ) ):
+ controllerStr = str( controller + 1 )
+ for host in hosts[ controller ]:
+ if host is None or host.get( 'ipAddresses', [] ) == []:
+ main.log.error(
+ "DEBUG:Error with host ipAddresses on controller" +
+ controllerStr + ": " + str( host ) )
+ ipResult = main.FALSE
+ ports = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].ports,
+ name="ports-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ports.append( t.result )
+ links = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].links,
+ name="links-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ links.append( t.result )
+ clusters = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].clusters,
+ name="clusters-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ clusters.append( t.result )
+
+ elapsed = time.time() - startTime
+ cliTime = time.time() - cliStart
+ print "Elapsed time: " + str( elapsed )
+ print "CLI time: " + str( cliTime )
+
+ mnSwitches = main.Mininet1.getSwitches()
+ mnLinks = main.Mininet1.getLinks()
+ mnHosts = main.Mininet1.getHosts()
+ for controller in range( numControllers ):
+ controllerStr = str( controller + 1 )
+ if devices[ controller ] and ports[ controller ] and\
+ "Error" not in devices[ controller ] and\
+ "Error" not in ports[ controller ]:
+
+ currentDevicesResult = main.Mininet1.compareSwitches(
+ mnSwitches,
+ json.loads( devices[ controller ] ),
+ json.loads( ports[ controller ] ) )
+ else:
+ currentDevicesResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentDevicesResult,
+ onpass="ONOS" + controllerStr +
+ " Switches view is correct",
+ onfail="ONOS" + controllerStr +
+ " Switches view is incorrect" )
+
+ if links[ controller ] and "Error" not in links[ controller ]:
+ currentLinksResult = main.Mininet1.compareLinks(
+ mnSwitches, mnLinks,
+ json.loads( links[ controller ] ) )
+ else:
+ currentLinksResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentLinksResult,
+ onpass="ONOS" + controllerStr +
+ " links view is correct",
+ onfail="ONOS" + controllerStr +
+ " links view is incorrect" )
+
+ if hosts[ controller ] or "Error" not in hosts[ controller ]:
+ currentHostsResult = main.Mininet1.compareHosts(
+ mnHosts,
+ hosts[ controller ] )
+ else:
+ currentHostsResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentHostsResult,
+ onpass="ONOS" + controllerStr +
+ " hosts exist in Mininet",
+ onfail="ONOS" + controllerStr +
+ " hosts don't match Mininet" )
+ # CHECKING HOST ATTACHMENT POINTS
+ hostAttachment = True
+ zeroHosts = False
+ # FIXME: topo-HA/obelisk specific mappings:
+ # key is mac and value is dpid
+ mappings = {}
+ for i in range( 1, 29 ): # hosts 1 through 28
+ # set up correct variables:
+ macId = "00:" * 5 + hex( i ).split( "0x" )[1].upper().zfill(2)
+ if i == 1:
+ deviceId = "1000".zfill(16)
+ elif i == 2:
+ deviceId = "2000".zfill(16)
+ elif i == 3:
+ deviceId = "3000".zfill(16)
+ elif i == 4:
+ deviceId = "3004".zfill(16)
+ elif i == 5:
+ deviceId = "5000".zfill(16)
+ elif i == 6:
+ deviceId = "6000".zfill(16)
+ elif i == 7:
+ deviceId = "6007".zfill(16)
+ elif i >= 8 and i <= 17:
+ dpid = '3' + str( i ).zfill( 3 )
+ deviceId = dpid.zfill(16)
+ elif i >= 18 and i <= 27:
+ dpid = '6' + str( i ).zfill( 3 )
+ deviceId = dpid.zfill(16)
+ elif i == 28:
+ deviceId = "2800".zfill(16)
+ mappings[ macId ] = deviceId
+ if hosts[ controller ] or "Error" not in hosts[ controller ]:
+ if hosts[ controller ] == []:
+ main.log.warn( "There are no hosts discovered" )
+ zeroHosts = True
+ else:
+ for host in hosts[ controller ]:
+ mac = None
+ location = None
+ device = None
+ port = None
+ try:
+ mac = host.get( 'mac' )
+ assert mac, "mac field could not be found for this host object"
+
+ location = host.get( 'location' )
+ assert location, "location field could not be found for this host object"
+
+ # Trim the protocol identifier off deviceId
+ device = str( location.get( 'elementId' ) ).split(':')[1]
+ assert device, "elementId field could not be found for this host location object"
+
+ port = location.get( 'port' )
+ assert port, "port field could not be found for this host location object"
+
+ # Now check if this matches where they should be
+ if mac and device and port:
+ if str( port ) != "1":
+ main.log.error( "The attachment port is incorrect for " +
+ "host " + str( mac ) +
+ ". Expected: 1 Actual: " + str( port) )
+ hostAttachment = False
+ if device != mappings[ str( mac ) ]:
+ main.log.error( "The attachment device is incorrect for " +
+ "host " + str( mac ) +
+ ". Expected: " + mappings[ str( mac ) ] +
+ " Actual: " + device )
+ hostAttachment = False
+ else:
+ hostAttachment = False
+ except AssertionError:
+ main.log.exception( "Json object not as expected" )
+ main.log.error( repr( host ) )
+ hostAttachment = False
+ else:
+ main.log.error( "No hosts json output or \"Error\"" +
+ " in output. hosts = " +
+ repr( hosts[ controller ] ) )
+ if zeroHosts is False:
+ hostAttachment = True
+
+ # END CHECKING HOST ATTACHMENT POINTS
+ devicesResults = devicesResults and currentDevicesResult
+ linksResults = linksResults and currentLinksResult
+ hostsResults = hostsResults and currentHostsResult
+ hostAttachmentResults = hostAttachmentResults and\
+ hostAttachment
+ topoResult = ( devicesResults and linksResults
+ and hostsResults and ipResult and
+ hostAttachmentResults )
+
+ # Compare json objects for hosts and dataplane clusters
+
+ # hosts
+ main.step( "Hosts view is consistent across all ONOS nodes" )
+ consistentHostsResult = main.TRUE
+ for controller in range( len( hosts ) ):
+ controllerStr = str( controller + 1 )
+ if "Error" not in hosts[ controller ]:
+ if hosts[ controller ] == hosts[ 0 ]:
+ continue
+ else: # hosts not consistent
+ main.log.error( "hosts from ONOS" + controllerStr +
+ " is inconsistent with ONOS1" )
+ main.log.warn( repr( hosts[ controller ] ) )
+ consistentHostsResult = main.FALSE
+
+ else:
+ main.log.error( "Error in getting ONOS hosts from ONOS" +
+ controllerStr )
+ consistentHostsResult = main.FALSE
+ main.log.warn( "ONOS" + controllerStr +
+ " hosts response: " +
+ repr( hosts[ controller ] ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=consistentHostsResult,
+ onpass="Hosts view is consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of hosts" )
+
+ main.step( "Hosts information is correct" )
+ hostsResults = hostsResults and ipResult
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=hostsResults,
+ onpass="Host information is correct",
+ onfail="Host information is incorrect" )
+
+ main.step( "Host attachment points to the network" )
+ utilities.assert_equals(
+ expect=True,
+ actual=hostAttachmentResults,
+ onpass="Hosts are correctly attached to the network",
+ onfail="ONOS did not correctly attach hosts to the network" )
+
+ # Strongly connected clusters of devices
+ main.step( "Clusters view is consistent across all ONOS nodes" )
+ consistentClustersResult = main.TRUE
+ for controller in range( len( clusters ) ):
+ controllerStr = str( controller + 1 )
+ if "Error" not in clusters[ controller ]:
+ if clusters[ controller ] == clusters[ 0 ]:
+ continue
+ else: # clusters not consistent
+ main.log.error( "clusters from ONOS" +
+ controllerStr +
+ " is inconsistent with ONOS1" )
+ consistentClustersResult = main.FALSE
+
+ else:
+ main.log.error( "Error in getting dataplane clusters " +
+ "from ONOS" + controllerStr )
+ consistentClustersResult = main.FALSE
+ main.log.warn( "ONOS" + controllerStr +
+ " clusters response: " +
+ repr( clusters[ controller ] ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=consistentClustersResult,
+ onpass="Clusters view is consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of clusters" )
+
+ main.step( "There is only one SCC" )
+ # there should always only be one cluster
+ try:
+ numClusters = len( json.loads( clusters[ 0 ] ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing clusters[0]: " +
+ repr( clusters[0] ) )
+ clusterResults = main.FALSE
+ if numClusters == 1:
+ clusterResults = main.TRUE
+ utilities.assert_equals(
+ expect=1,
+ actual=numClusters,
+ onpass="ONOS shows 1 SCC",
+ onfail="ONOS shows " + str( numClusters ) + " SCCs" )
+
+ topoResult = ( devicesResults and linksResults
+ and hostsResults and consistentHostsResult
+ and consistentClustersResult and clusterResults
+ and ipResult and hostAttachmentResults )
+
+ topoResult = topoResult and int( count <= 2 )
+ note = "note it takes about " + str( int( cliTime ) ) + \
+ " seconds for the test to make all the cli calls to fetch " +\
+ "the topology from each ONOS instance"
+ main.log.info(
+ "Very crass estimate for topology discovery/convergence( " +
+ str( note ) + " ): " + str( elapsed ) + " seconds, " +
+ str( count ) + " tries" )
+
+ main.step( "Device information is correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=devicesResults,
+ onpass="Device information is correct",
+ onfail="Device information is incorrect" )
+
+ main.step( "Links are correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=linksResults,
+ onpass="Link are correct",
+ onfail="Links are incorrect" )
+
+ main.step( "Hosts are correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=hostsResults,
+ onpass="Hosts are correct",
+ onfail="Hosts are incorrect" )
+
+ # FIXME: move this to an ONOS state case
+ main.step( "Checking ONOS nodes" )
+ nodesOutput = []
+ nodeResults = main.TRUE
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].nodes,
+ name="nodes-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ nodesOutput.append( t.result )
+ ips = [ node.ip_address for node in nodes ]
+ for i in nodesOutput:
+ try:
+ current = json.loads( i )
+ for node in current:
+ currentResult = main.FALSE
+ if node['ip'] in ips: # node in nodes() output is in cell
+ if node['state'] == 'ACTIVE':
+ currentResult = main.TRUE
+ else:
+ main.log.error( "Error in ONOS node availability" )
+ main.log.error(
+ json.dumps( current,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ break
+ nodeResults = nodeResults and currentResult
+ except ( ValueError, TypeError ):
+ main.log.error( "Error parsing nodes output" )
+ main.log.warn( repr( i ) )
+ utilities.assert_equals( expect=main.TRUE, actual=nodeResults,
+ onpass="Nodes check successful",
+ onfail="Nodes check NOT successful" )
+
+ def CASE9( self, main ):
+ """
+ Link s3-s28 down
+ """
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+ # NOTE: You should probably run a topology check after this
+
+ linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] )
+
+ description = "Turn off a link to ensure that Link Discovery " +\
+ "is working properly"
+ main.case( description )
+
+ main.step( "Kill Link between s3 and s28" )
+ LinkDown = main.Mininet1.link( END1="s3", END2="s28", OPTION="down" )
+ main.log.info( "Waiting " + str( linkSleep ) +
+ " seconds for link down to be discovered" )
+ time.sleep( linkSleep )
+ utilities.assert_equals( expect=main.TRUE, actual=LinkDown,
+ onpass="Link down successful",
+ onfail="Failed to bring link down" )
+ # TODO do some sort of check here
+
+ def CASE10( self, main ):
+ """
+ Link s3-s28 up
+ """
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+ # NOTE: You should probably run a topology check after this
+
+ linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] )
+
+ description = "Restore a link to ensure that Link Discovery is " + \
+ "working properly"
+ main.case( description )
+
+ main.step( "Bring link between s3 and s28 back up" )
+ LinkUp = main.Mininet1.link( END1="s3", END2="s28", OPTION="up" )
+ main.log.info( "Waiting " + str( linkSleep ) +
+ " seconds for link up to be discovered" )
+ time.sleep( linkSleep )
+ utilities.assert_equals( expect=main.TRUE, actual=LinkUp,
+ onpass="Link up successful",
+ onfail="Failed to bring link up" )
+ # TODO do some sort of check here
+
+ def CASE11( self, main ):
+ """
+ Switch Down
+ """
+ # NOTE: You should probably run a topology check after this
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+
+ switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] )
+
+ description = "Killing a switch to ensure it is discovered correctly"
+ main.case( description )
+ switch = main.params[ 'kill' ][ 'switch' ]
+ switchDPID = main.params[ 'kill' ][ 'dpid' ]
+
+ # TODO: Make this switch parameterizable
+ main.step( "Kill " + switch )
+ main.log.info( "Deleting " + switch )
+ main.Mininet1.delSwitch( switch )
+ main.log.info( "Waiting " + str( switchSleep ) +
+ " seconds for switch down to be discovered" )
+ time.sleep( switchSleep )
+ device = main.ONOScli1.getDevice( dpid=switchDPID )
+ # Peek at the deleted switch
+ main.log.warn( str( device ) )
+ result = main.FALSE
+ if device and device[ 'available' ] is False:
+ result = main.TRUE
+ utilities.assert_equals( expect=main.TRUE, actual=result,
+ onpass="Kill switch successful",
+ onfail="Failed to kill switch?" )
+
+ def CASE12( self, main ):
+ """
+ Switch Up
+ """
+ # NOTE: You should probably run a topology check after this
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+ assert ONOS1Port, "ONOS1Port not defined"
+ assert ONOS2Port, "ONOS2Port not defined"
+ assert ONOS3Port, "ONOS3Port not defined"
+ assert ONOS4Port, "ONOS4Port not defined"
+ assert ONOS5Port, "ONOS5Port not defined"
+ assert ONOS6Port, "ONOS6Port not defined"
+ assert ONOS7Port, "ONOS7Port not defined"
+
+ switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] )
+ switch = main.params[ 'kill' ][ 'switch' ]
+ switchDPID = main.params[ 'kill' ][ 'dpid' ]
+ links = main.params[ 'kill' ][ 'links' ].split()
+ description = "Adding a switch to ensure it is discovered correctly"
+ main.case( description )
+
+ main.step( "Add back " + switch )
+ main.Mininet1.addSwitch( switch, dpid=switchDPID )
+ for peer in links:
+ main.Mininet1.addLink( switch, peer )
+ ipList = []
+ for i in range( numControllers ):
+ ipList.append( nodes[ i ].ip_address )
+ main.Mininet1.assignSwController( sw=switch, ip=ipList )
+ main.log.info( "Waiting " + str( switchSleep ) +
+ " seconds for switch up to be discovered" )
+ time.sleep( switchSleep )
+ device = main.ONOScli1.getDevice( dpid=switchDPID )
+ # Peek at the deleted switch
+ main.log.warn( str( device ) )
+ result = main.FALSE
+ if device and device[ 'available' ]:
+ result = main.TRUE
+ utilities.assert_equals( expect=main.TRUE, actual=result,
+ onpass="add switch successful",
+ onfail="Failed to add switch?" )
+
+ def CASE13( self, main ):
+ """
+ Clean up
+ """
+ import os
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+
+ # printing colors to terminal
+ colors = { 'cyan': '\033[96m', 'purple': '\033[95m',
+ 'blue': '\033[94m', 'green': '\033[92m',
+ 'yellow': '\033[93m', 'red': '\033[91m', 'end': '\033[0m' }
+ main.case( "Test Cleanup" )
+ main.step( "Killing tcpdumps" )
+ main.Mininet2.stopTcpdump()
+
+ testname = main.TEST
+ if main.params[ 'BACKUP' ] == "True":
+ main.step( "Copying MN pcap and ONOS log files to test station" )
+ teststationUser = main.params[ 'BACKUP' ][ 'TESTONUSER' ]
+ teststationIP = main.params[ 'BACKUP' ][ 'TESTONIP' ]
+ # NOTE: MN Pcap file is being saved to ~/packet_captures
+ # scp this file as MN and TestON aren't necessarily the same vm
+ # FIXME: scp
+ # mn files
+ # TODO: Load these from params
+ # NOTE: must end in /
+ logFolder = "/opt/onos/log/"
+ logFiles = [ "karaf.log", "karaf.log.1" ]
+ # NOTE: must end in /
+ dstDir = "~/packet_captures/"
+ for f in logFiles:
+ for node in nodes:
+ main.ONOSbench.handle.sendline( "scp sdn@" + node.ip_address +
+ ":" + logFolder + f + " " +
+ teststationUser + "@" +
+ teststationIP + ":" +
+ dstDir + str( testname ) +
+ "-" + node.name + "-" + f )
+ main.ONOSbench.handle.expect( "\$" )
+
+ # std*.log's
+ # NOTE: must end in /
+ logFolder = "/opt/onos/var/"
+ logFiles = [ "stderr.log", "stdout.log" ]
+ # NOTE: must end in /
+ dstDir = "~/packet_captures/"
+ for f in logFiles:
+ for node in nodes:
+ main.ONOSbench.handle.sendline( "scp sdn@" + node.ip_address +
+ ":" + logFolder + f + " " +
+ teststationUser + "@" +
+ teststationIP + ":" +
+ dstDir + str( testname ) +
+ "-" + node.name + "-" + f )
+ main.ONOSbench.handle.expect( "\$" )
+ # sleep so scp can finish
+ time.sleep( 10 )
+ main.step( "Packing and rotating pcap archives" )
+ os.system( "~/TestON/dependencies/rotate.sh " + str( testname ) )
+
+ main.step( "Stopping Mininet" )
+ mnResult = main.Mininet1.stopNet()
+ utilities.assert_equals( expect=main.TRUE, actual=mnResult,
+ onpass="Mininet stopped",
+ onfail="MN cleanup NOT successful" )
+
+ main.step( "Checking ONOS Logs for errors" )
+ for node in nodes:
+ print colors[ 'purple' ] + "Checking logs for errors on " + \
+ node.name + ":" + colors[ 'end' ]
+ print main.ONOSbench.checkLogs( node.ip_address )
+
+ try:
+ timerLog = open( main.logdir + "/Timers.csv", 'w')
+ # Overwrite with empty line and close
+ labels = "Gossip Intents"
+ data = str( gossipTime )
+ timerLog.write( labels + "\n" + data )
+ timerLog.close()
+ except NameError, e:
+ main.log.exception(e)
+
+ def CASE14( self, main ):
+ """
+ start election app on all onos nodes
+ """
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+
+ main.case("Start Leadership Election app")
+ main.step( "Install leadership election app" )
+ appResult = main.ONOScli1.activateApp( "org.onosproject.election" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=appResult,
+ onpass="Election app installed",
+ onfail="Something went wrong with installing Leadership election" )
+
+ main.step( "Run for election on each node" )
+ leaderResult = main.TRUE
+ leaders = []
+ for cli in CLIs:
+ cli.electionTestRun()
+ for cli in CLIs:
+ leader = cli.electionTestLeader()
+ if leader is None or leader == main.FALSE:
+ main.log.error( cli.name + ": Leader for the election app " +
+ "should be an ONOS node, instead got '" +
+ str( leader ) + "'" )
+ leaderResult = main.FALSE
+ leaders.append( leader )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=leaderResult,
+ onpass="Successfully ran for leadership",
+ onfail="Failed to run for leadership" )
+
+ main.step( "Check that each node shows the same leader" )
+ sameLeader = main.TRUE
+ if len( set( leaders ) ) != 1:
+ sameLeader = main.FALSE
+ main.log.error( "Results of electionTestLeader is order of CLIs:" +
+ str( leaders ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=sameLeader,
+ onpass="Leadership is consistent for the election topic",
+ onfail="Nodes have different leaders" )
+
+ def CASE15( self, main ):
+ """
+ Check that Leadership Election is still functional
+ """
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+
+ leaderResult = main.TRUE
+ description = "Check that Leadership Election is still functional"
+ main.case( description )
+
+ main.step( "Check that each node shows the same leader" )
+ sameLeader = main.TRUE
+ leaders = []
+ for cli in CLIs:
+ leader = cli.electionTestLeader()
+ leaders.append( leader )
+ if len( set( leaders ) ) != 1:
+ sameLeader = main.FALSE
+ main.log.error( "Results of electionTestLeader is order of CLIs:" +
+ str( leaders ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=sameLeader,
+ onpass="Leadership is consistent for the election topic",
+ onfail="Nodes have different leaders" )
+
+ main.step( "Find current leader and withdraw" )
+ leader = main.ONOScli1.electionTestLeader()
+ # do some sanity checking on leader before using it
+ withdrawResult = main.FALSE
+ if leader is None or leader == main.FALSE:
+ main.log.error(
+ "Leader for the election app should be an ONOS node," +
+ "instead got '" + str( leader ) + "'" )
+ leaderResult = main.FALSE
+ oldLeader = None
+ for i in range( len( CLIs ) ):
+ if leader == nodes[ i ].ip_address:
+ oldLeader = CLIs[ i ]
+ break
+ else: # FOR/ELSE statement
+ main.log.error( "Leader election, could not find current leader" )
+ if oldLeader:
+ withdrawResult = oldLeader.electionTestWithdraw()
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=withdrawResult,
+ onpass="Node was withdrawn from election",
+ onfail="Node was not withdrawn from election" )
+
+ main.step( "Make sure new leader is elected" )
+ # FIXME: use threads
+ leaderList = []
+ for cli in CLIs:
+ leaderN = cli.electionTestLeader()
+ leaderList.append( leaderN )
+ if leaderN == leader:
+ main.log.error( cli.name + " still sees " + str( leader ) +
+ " as leader after they withdrew" )
+ leaderResult = main.FALSE
+ elif leaderN == main.FALSE:
+ # error in response
+ # TODO: add check for "Command not found:" in the driver, this
+ # means the app isn't loaded
+ main.log.error( "Something is wrong with " +
+ "electionTestLeader function, " +
+ "check the error logs" )
+ leaderResult = main.FALSE
+ elif leaderN is None:
+ # node may not have recieved the event yet
+ time.sleep(7)
+ leaderN = cli.electionTestLeader()
+ leaderList.pop()
+ leaderList.append( leaderN )
+ consistentLeader = main.FALSE
+ if len( set( leaderList ) ) == 1:
+ main.log.info( "Each Election-app sees '" +
+ str( leaderList[ 0 ] ) +
+ "' as the leader" )
+ consistentLeader = main.TRUE
+ else:
+ main.log.error(
+ "Inconsistent responses for leader of Election-app:" )
+ for n in range( len( leaderList ) ):
+ main.log.error( "ONOS" + str( n + 1 ) + " response: " +
+ str( leaderList[ n ] ) )
+ leaderResult = leaderResult and consistentLeader
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=leaderResult,
+ onpass="Leadership election passed",
+ onfail="Something went wrong with Leadership election" )
+
+ main.step( "Run for election on old leader( just so everyone " +
+ "is in the hat )" )
+ if oldLeader:
+ runResult = oldLeader.electionTestRun()
+ else:
+ runResult = main.FALSE
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=runResult,
+ onpass="App re-ran for election",
+ onfail="App failed to run for election" )
+
+ main.step( "Leader did not change when old leader re-ran" )
+ afterRun = main.ONOScli1.electionTestLeader()
+ # verify leader didn't just change
+ if afterRun == leaderList[ 0 ]:
+ afterResult = main.TRUE
+ else:
+ afterResult = main.FALSE
+
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=afterResult,
+ onpass="Old leader successfully re-ran for election",
+ onfail="Something went wrong with Leadership election after " +
+ "the old leader re-ran for election" )
+
+ def CASE16( self, main ):
+ """
+ Install Distributed Primitives app
+ """
+ import time
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+
+ # Variables for the distributed primitives tests
+ global pCounterName
+ global iCounterName
+ global pCounterValue
+ global iCounterValue
+ global onosSet
+ global onosSetName
+ pCounterName = "TestON-Partitions"
+ iCounterName = "TestON-inMemory"
+ pCounterValue = 0
+ iCounterValue = 0
+ onosSet = set([])
+ onosSetName = "TestON-set"
+
+ description = "Install Primitives app"
+ main.case( description )
+ main.step( "Install Primitives app" )
+ appName = "org.onosproject.distributedprimitives"
+ appResults = CLIs[0].activateApp( appName )
+ utilities.assert_equals( expect=main.TRUE,
+ actual=appResults,
+ onpass="Primitives app activated",
+ onfail="Primitives app not activated" )
+ time.sleep( 5 ) # To allow all nodes to activate
+
+ def CASE17( self, main ):
+ """
+ Check for basic functionality with distributed primitives
+ """
+ import json
+ # Make sure variables are defined/set
+ assert numControllers, "numControllers not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert CLIs, "CLIs not defined"
+ assert nodes, "nodes not defined"
+ assert pCounterName, "pCounterName not defined"
+ assert iCounterName, "iCounterName not defined"
+ assert onosSetName, "onosSetName not defined"
+ # NOTE: assert fails if value is 0/None/Empty/False
+ try:
+ pCounterValue
+ except NameError:
+ main.log.error( "pCounterValue not defined, setting to 0" )
+ pCounterValue = 0
+ try:
+ iCounterValue
+ except NameError:
+ main.log.error( "iCounterValue not defined, setting to 0" )
+ iCounterValue = 0
+ try:
+ onosSet
+ except NameError:
+ main.log.error( "onosSet not defined, setting to empty Set" )
+ onosSet = set([])
+ # Variables for the distributed primitives tests. These are local only
+ addValue = "a"
+ addAllValue = "a b c d e f"
+ retainValue = "c d e f"
+
+ description = "Check for basic functionality with distributed " +\
+ "primitives"
+ main.case( description )
+ main.caseExplaination = "Test the methods of the distributed primitives (counters and sets) throught the cli"
+ # DISTRIBUTED ATOMIC COUNTERS
+ main.step( "Increment and get a default counter on each node" )
+ pCounters = []
+ threads = []
+ addedPValues = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].counterTestIncrement,
+ name="counterIncrement-" + str( i ),
+ args=[ pCounterName ] )
+ pCounterValue += 1
+ addedPValues.append( pCounterValue )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ pCounters.append( t.result )
+ # Check that counter incremented numController times
+ pCounterResults = True
+ for i in addedPValues:
+ tmpResult = i in pCounters
+ pCounterResults = pCounterResults and tmpResult
+ if not tmpResult:
+ main.log.error( str( i ) + " is not in partitioned "
+ "counter incremented results" )
+ utilities.assert_equals( expect=True,
+ actual=pCounterResults,
+ onpass="Default counter incremented",
+ onfail="Error incrementing default" +
+ " counter" )
+
+ main.step( "Increment and get an in memory counter on each node" )
+ iCounters = []
+ addedIValues = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].counterTestIncrement,
+ name="icounterIncrement-" + str( i ),
+ args=[ iCounterName ],
+ kwargs={ "inMemory": True } )
+ iCounterValue += 1
+ addedIValues.append( iCounterValue )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ iCounters.append( t.result )
+ # Check that counter incremented numController times
+ iCounterResults = True
+ for i in addedIValues:
+ tmpResult = i in iCounters
+ iCounterResults = iCounterResults and tmpResult
+ if not tmpResult:
+ main.log.error( str( i ) + " is not in the in-memory "
+ "counter incremented results" )
+ utilities.assert_equals( expect=True,
+ actual=iCounterResults,
+ onpass="In memory counter incremented",
+ onfail="Error incrementing in memory" +
+ " counter" )
+
+ main.step( "Check counters are consistant across nodes" )
+ onosCounters = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].counters,
+ name="counters-" + str( i ) )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ onosCounters.append( t.result )
+ tmp = [ i == onosCounters[ 0 ] for i in onosCounters ]
+ if all( tmp ):
+ main.log.info( "Counters are consistent across all nodes" )
+ consistentCounterResults = main.TRUE
+ else:
+ main.log.error( "Counters are not consistent across all nodes" )
+ consistentCounterResults = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=consistentCounterResults,
+ onpass="ONOS counters are consistent " +
+ "across nodes",
+ onfail="ONOS Counters are inconsistent " +
+ "across nodes" )
+
+ main.step( "Counters we added have the correct values" )
+ correctResults = main.TRUE
+ for i in range( numControllers ):
+ try:
+ current = json.loads( onosCounters[i] )
+ except ( ValueError, TypeError ):
+ main.log.error( "Could not parse counters response from ONOS" +
+ str( i + 1 ) )
+ main.log.warn( repr( onosCounters[ i ] ) )
+ pValue = None
+ iValue = None
+ try:
+ for database in current:
+ partitioned = database.get( 'partitionedDatabaseCounters' )
+ if partitioned:
+ for value in partitioned:
+ if value.get( 'name' ) == pCounterName:
+ pValue = value.get( 'value' )
+ break
+ inMemory = database.get( 'inMemoryDatabaseCounters' )
+ if inMemory:
+ for value in inMemory:
+ if value.get( 'name' ) == iCounterName:
+ iValue = value.get( 'value' )
+ break
+ except AttributeError, e:
+ main.log.error( "ONOS" + str( i + 1 ) + " counters result " +
+ "is not as expected" )
+ correctResults = main.FALSE
+ if pValue == pCounterValue:
+ main.log.info( "Partitioned counter value is correct" )
+ else:
+ main.log.error( "Partitioned counter value is incorrect," +
+ " expected value: " + str( pCounterValue )
+ + " current value: " + str( pValue ) )
+ correctResults = main.FALSE
+ if iValue == iCounterValue:
+ main.log.info( "In memory counter value is correct" )
+ else:
+ main.log.error( "In memory counter value is incorrect, " +
+ "expected value: " + str( iCounterValue ) +
+ " current value: " + str( iValue ) )
+ correctResults = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=correctResults,
+ onpass="Added counters are correct",
+ onfail="Added counters are incorrect" )
+ # DISTRIBUTED SETS
+ main.step( "Distributed Set get" )
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+
+ getResults = main.TRUE
+ for i in range( numControllers ):
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=getResults,
+ onpass="Set elements are correct",
+ onfail="Set elements are incorrect" )
+
+ main.step( "Distributed Set size" )
+ sizeResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+
+ sizeResults = main.TRUE
+ for i in range( numControllers ):
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ utilities.assert_equals( expect=main.TRUE,
+ actual=sizeResults,
+ onpass="Set sizes are correct",
+ onfail="Set sizes are incorrect" )
+
+ main.step( "Distributed Set add()" )
+ onosSet.add( addValue )
+ addResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestAdd,
+ name="setTestAdd-" + str( i ),
+ args=[ onosSetName, addValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ addResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ addResults = main.TRUE
+ for i in range( numControllers ):
+ if addResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif addResponses[ i ] == main.FALSE:
+ # Already in set, probably fine
+ pass
+ elif addResponses[ i ] == main.ERROR:
+ # Error in execution
+ addResults = main.FALSE
+ else:
+ # unexpected result
+ addResults = main.FALSE
+ if addResults != main.TRUE:
+ main.log.error( "Error executing set add" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( numControllers ):
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( numControllers ):
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ addResults = addResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=addResults,
+ onpass="Set add correct",
+ onfail="Set add was incorrect" )
+
+ main.step( "Distributed Set addAll()" )
+ onosSet.update( addAllValue.split() )
+ addResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestAdd,
+ name="setTestAddAll-" + str( i ),
+ args=[ onosSetName, addAllValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ addResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ addAllResults = main.TRUE
+ for i in range( numControllers ):
+ if addResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif addResponses[ i ] == main.FALSE:
+ # Already in set, probably fine
+ pass
+ elif addResponses[ i ] == main.ERROR:
+ # Error in execution
+ addAllResults = main.FALSE
+ else:
+ # unexpected result
+ addAllResults = main.FALSE
+ if addAllResults != main.TRUE:
+ main.log.error( "Error executing set addAll" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( numControllers ):
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( numControllers ):
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ addAllResults = addAllResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=addAllResults,
+ onpass="Set addAll correct",
+ onfail="Set addAll was incorrect" )
+
+ main.step( "Distributed Set contains()" )
+ containsResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestGet,
+ name="setContains-" + str( i ),
+ args=[ onosSetName ],
+ kwargs={ "values": addValue } )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ # NOTE: This is the tuple
+ containsResponses.append( t.result )
+
+ containsResults = main.TRUE
+ for i in range( numControllers ):
+ if containsResponses[ i ] == main.ERROR:
+ containsResults = main.FALSE
+ else:
+ containsResults = containsResults and\
+ containsResponses[ i ][ 1 ]
+ utilities.assert_equals( expect=main.TRUE,
+ actual=containsResults,
+ onpass="Set contains is functional",
+ onfail="Set contains failed" )
+
+ main.step( "Distributed Set containsAll()" )
+ containsAllResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestGet,
+ name="setContainsAll-" + str( i ),
+ args=[ onosSetName ],
+ kwargs={ "values": addAllValue } )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ # NOTE: This is the tuple
+ containsAllResponses.append( t.result )
+
+ containsAllResults = main.TRUE
+ for i in range( numControllers ):
+ if containsResponses[ i ] == main.ERROR:
+ containsResults = main.FALSE
+ else:
+ containsResults = containsResults and\
+ containsResponses[ i ][ 1 ]
+ utilities.assert_equals( expect=main.TRUE,
+ actual=containsAllResults,
+ onpass="Set containsAll is functional",
+ onfail="Set containsAll failed" )
+
+ main.step( "Distributed Set remove()" )
+ onosSet.remove( addValue )
+ removeResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestRemove,
+ name="setTestRemove-" + str( i ),
+ args=[ onosSetName, addValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ removeResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ removeResults = main.TRUE
+ for i in range( numControllers ):
+ if removeResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif removeResponses[ i ] == main.FALSE:
+ # not in set, probably fine
+ pass
+ elif removeResponses[ i ] == main.ERROR:
+ # Error in execution
+ removeResults = main.FALSE
+ else:
+ # unexpected result
+ removeResults = main.FALSE
+ if removeResults != main.TRUE:
+ main.log.error( "Error executing set remove" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( numControllers ):
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( numControllers ):
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ removeResults = removeResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=removeResults,
+ onpass="Set remove correct",
+ onfail="Set remove was incorrect" )
+
+ main.step( "Distributed Set removeAll()" )
+ onosSet.difference_update( addAllValue.split() )
+ removeAllResponses = []
+ threads = []
+ try:
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestRemove,
+ name="setTestRemoveAll-" + str( i ),
+ args=[ onosSetName, addAllValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ removeAllResponses.append( t.result )
+ except Exception, e:
+ main.log.exception(e)
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ removeAllResults = main.TRUE
+ for i in range( numControllers ):
+ if removeAllResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif removeAllResponses[ i ] == main.FALSE:
+ # not in set, probably fine
+ pass
+ elif removeAllResponses[ i ] == main.ERROR:
+ # Error in execution
+ removeAllResults = main.FALSE
+ else:
+ # unexpected result
+ removeAllResults = main.FALSE
+ if removeAllResults != main.TRUE:
+ main.log.error( "Error executing set removeAll" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( numControllers ):
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( numControllers ):
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ removeAllResults = removeAllResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=removeAllResults,
+ onpass="Set removeAll correct",
+ onfail="Set removeAll was incorrect" )
+
+ main.step( "Distributed Set addAll()" )
+ onosSet.update( addAllValue.split() )
+ addResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestAdd,
+ name="setTestAddAll-" + str( i ),
+ args=[ onosSetName, addAllValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ addResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ addAllResults = main.TRUE
+ for i in range( numControllers ):
+ if addResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif addResponses[ i ] == main.FALSE:
+ # Already in set, probably fine
+ pass
+ elif addResponses[ i ] == main.ERROR:
+ # Error in execution
+ addAllResults = main.FALSE
+ else:
+ # unexpected result
+ addAllResults = main.FALSE
+ if addAllResults != main.TRUE:
+ main.log.error( "Error executing set addAll" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( numControllers ):
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( numControllers ):
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ addAllResults = addAllResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=addAllResults,
+ onpass="Set addAll correct",
+ onfail="Set addAll was incorrect" )
+
+ main.step( "Distributed Set clear()" )
+ onosSet.clear()
+ clearResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestRemove,
+ name="setTestClear-" + str( i ),
+ args=[ onosSetName, " "], # Values doesn't matter
+ kwargs={ "clear": True } )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ clearResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ clearResults = main.TRUE
+ for i in range( numControllers ):
+ if clearResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif clearResponses[ i ] == main.FALSE:
+ # Nothing set, probably fine
+ pass
+ elif clearResponses[ i ] == main.ERROR:
+ # Error in execution
+ clearResults = main.FALSE
+ else:
+ # unexpected result
+ clearResults = main.FALSE
+ if clearResults != main.TRUE:
+ main.log.error( "Error executing set clear" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( numControllers ):
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( numControllers ):
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ clearResults = clearResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=clearResults,
+ onpass="Set clear correct",
+ onfail="Set clear was incorrect" )
+
+ main.step( "Distributed Set addAll()" )
+ onosSet.update( addAllValue.split() )
+ addResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestAdd,
+ name="setTestAddAll-" + str( i ),
+ args=[ onosSetName, addAllValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ addResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ addAllResults = main.TRUE
+ for i in range( numControllers ):
+ if addResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif addResponses[ i ] == main.FALSE:
+ # Already in set, probably fine
+ pass
+ elif addResponses[ i ] == main.ERROR:
+ # Error in execution
+ addAllResults = main.FALSE
+ else:
+ # unexpected result
+ addAllResults = main.FALSE
+ if addAllResults != main.TRUE:
+ main.log.error( "Error executing set addAll" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( numControllers ):
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( numControllers ):
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ addAllResults = addAllResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=addAllResults,
+ onpass="Set addAll correct",
+ onfail="Set addAll was incorrect" )
+
+ main.step( "Distributed Set retain()" )
+ onosSet.intersection_update( retainValue.split() )
+ retainResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestRemove,
+ name="setTestRetain-" + str( i ),
+ args=[ onosSetName, retainValue ],
+ kwargs={ "retain": True } )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ retainResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ retainResults = main.TRUE
+ for i in range( numControllers ):
+ if retainResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif retainResponses[ i ] == main.FALSE:
+ # Already in set, probably fine
+ pass
+ elif retainResponses[ i ] == main.ERROR:
+ # Error in execution
+ retainResults = main.FALSE
+ else:
+ # unexpected result
+ retainResults = main.FALSE
+ if retainResults != main.TRUE:
+ main.log.error( "Error executing set retain" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( numControllers ):
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in range( numControllers ):
+ t = main.Thread( target=CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( numControllers ):
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + str( i + 1 ) +
+ " expected a size of " +
+ str( size ) + " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ retainResults = retainResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=retainResults,
+ onpass="Set retain correct",
+ onfail="Set retain was incorrect" )
+
diff --git a/TestON/tests/HAsanity/HAsanity.topo b/TestON/tests/HAsanity/HAsanity.topo
new file mode 100644
index 0000000..5f87b9d
--- /dev/null
+++ b/TestON/tests/HAsanity/HAsanity.topo
@@ -0,0 +1,170 @@
+<TOPOLOGY>
+ <COMPONENT>
+
+ <ONOSbench>
+ <host>localhost</host>
+ <user>admin</user>
+ <password>onos_test</password>
+ <type>OnosDriver</type>
+ <connect_order>1</connect_order>
+ <COMPONENTS>
+ </COMPONENTS>
+ </ONOSbench>
+
+ <ONOScli1>
+ <host>localhost</host>
+ <user>admin</user>
+ <password>onos_test</password>
+ <type>OnosCliDriver</type>
+ <connect_order>2</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli1>
+
+ <ONOScli2>
+ <host>localhost</host>
+ <user>admin</user>
+ <password>onos_test</password>
+ <type>OnosCliDriver</type>
+ <connect_order>3</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli2>
+
+ <ONOScli3>
+ <host>localhost</host>
+ <user>admin</user>
+ <password>onos_test</password>
+ <type>OnosCliDriver</type>
+ <connect_order>4</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli3>
+
+
+ <ONOScli4>
+ <host>localhost</host>
+ <user>admin</user>
+ <password>onos_test</password>
+ <type>OnosCliDriver</type>
+ <connect_order>5</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli4>
+
+
+ <ONOScli5>
+ <host>localhost</host>
+ <user>admin</user>
+ <password>onos_test</password>
+ <type>OnosCliDriver</type>
+ <connect_order>6</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli5>
+
+
+ <ONOScli6>
+ <host>localhost</host>
+ <user>admin</user>
+ <password>onos_test</password>
+ <type>OnosCliDriver</type>
+ <connect_order>7</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli6>
+
+
+ <ONOScli7>
+ <host>localhost</host>
+ <user>admin</user>
+ <password>onos_test</password>
+ <type>OnosCliDriver</type>
+ <connect_order>8</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli7>
+
+ <ONOS1>
+ <host>OC1</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>9</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS1>
+
+ <ONOS2>
+ <host>OC2</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>10</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS2>
+
+ <ONOS3>
+ <host>OC3</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>11</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS3>
+
+ <ONOS4>
+ <host>OC4</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>12</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS4>
+
+ <ONOS5>
+ <host>OC5</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>13</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS5>
+
+ <ONOS6>
+ <host>OC6</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>14</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS6>
+
+ <ONOS7>
+ <host>OC7</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>15</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS7>
+
+ <Mininet1>
+ <host>OCN</host>
+ <user>admin</user>
+ <password>onos_test</password>
+ <type>MininetCliDriver</type>
+ <connect_order>16</connect_order>
+ <COMPONENTS>
+ #Specify the Option for mininet
+ <arg1> --custom ~/mininet/custom/obelisk.py </arg1>
+ <arg2> --topo obelisk </arg2>
+ <arg3> </arg3>
+ <controller> none </controller>
+ </COMPONENTS>
+ </Mininet1>
+
+ <Mininet2>
+ <host>OCN</host>
+ <user>admin</user>
+ <password>onos_test</password>
+ <type>RemoteMininetDriver</type>
+ <connect_order>17</connect_order>
+ <COMPONENTS>
+ </COMPONENTS>
+ </Mininet2>
+
+ </COMPONENT>
+</TOPOLOGY>
diff --git a/TestON/tests/HAsanity/__init__.py b/TestON/tests/HAsanity/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/TestON/tests/HAsanity/__init__.py
diff --git a/TestON/tests/HAsanity/dependencies/obelisk.py b/TestON/tests/HAsanity/dependencies/obelisk.py
new file mode 100755
index 0000000..fb6ccdb
--- /dev/null
+++ b/TestON/tests/HAsanity/dependencies/obelisk.py
@@ -0,0 +1,70 @@
+#!/usr/bin/env python
+
+from mininet.topo import Topo
+
+class ObeliskTopo( Topo ):
+ def __init__( self ):
+ Topo.__init__( self )
+ topSwitch = self.addSwitch('s1',dpid='1000'.zfill(16))
+ leftTopSwitch = self.addSwitch('s2',dpid='2000'.zfill(16))
+ rightTopSwitch = self.addSwitch('s5',dpid='5000'.zfill(16))
+ leftBotSwitch = self.addSwitch('s3',dpid='3000'.zfill(16))
+ rightBotSwitch = self.addSwitch('s6',dpid='6000'.zfill(16))
+ midBotSwitch = self.addSwitch('s28',dpid='2800'.zfill(16))
+
+ topHost = self.addHost( 'h1' )
+ leftTopHost = self.addHost('h2')
+ rightTopHost = self.addHost('h5')
+ leftBotHost = self.addHost('h3')
+ rightBotHost = self.addHost('h6')
+ midBotHost = self.addHost('h28')
+ self.addLink(topSwitch,topHost)
+ self.addLink(leftTopSwitch,leftTopHost)
+ self.addLink(rightTopSwitch,rightTopHost)
+ self.addLink(leftBotSwitch,leftBotHost)
+ self.addLink(rightBotSwitch,rightBotHost)
+ self.addLink(midBotSwitch,midBotHost)
+ self.addLink(leftTopSwitch,rightTopSwitch)
+ self.addLink(topSwitch,leftTopSwitch)
+ self.addLink(topSwitch,rightTopSwitch)
+ self.addLink(leftTopSwitch,leftBotSwitch)
+ self.addLink(rightTopSwitch,rightBotSwitch)
+ self.addLink(leftBotSwitch,midBotSwitch)
+ self.addLink(midBotSwitch,rightBotSwitch)
+
+ agg1Switch = self.addSwitch('s4',dpid = '3004'.zfill(16))
+ agg2Switch = self.addSwitch('s7',dpid = '6007'.zfill(16))
+ agg1Host = self.addHost('h4')
+ agg2Host = self.addHost('h7')
+ self.addLink(agg1Switch,agg1Host)
+ self.addLink(agg2Switch,agg2Host)
+ self.addLink(agg1Switch, leftBotSwitch)
+ self.addLink(agg2Switch, rightBotSwitch)
+
+ for i in range(10):
+ num = str(i+8)
+ switch = self.addSwitch('s'+num,dpid = ('30'+num.zfill(2)).zfill(16))
+ host = self.addHost('h'+num)
+ self.addLink(switch, host)
+ self.addLink(switch, agg1Switch)
+
+ for i in range(10):
+ num = str(i+18)
+ switch = self.addSwitch('s'+num,dpid = ('60'+num.zfill(2)).zfill(16))
+ host = self.addHost('h'+num)
+ self.addLink(switch, host)
+ self.addLink(switch, agg2Switch)
+
+topos = { 'obelisk': (lambda: ObeliskTopo() ) }
+
+def run():
+ topo = ObeliskTopo()
+ net = Mininet( topo=topo, controller=RemoteController, autoSetMacs=True )
+ net.start()
+ CLI( net )
+ net.stop()
+
+if __name__ == '__main__':
+ setLogLevel( 'info' )
+ run()
+