Disabled MultiToSingle NOOPTION intent test. This testcase tested functionality that is not possible in onos. A new test will be added later.
Change-Id: I9a3d3ef7a86aa44a04639ff5accf6f3d19f002b7
diff --git a/TestON/tests/FUNCintent/FUNCintent.py b/TestON/tests/FUNCintent/FUNCintent.py
index 797a91a..8ed3988 100644
--- a/TestON/tests/FUNCintent/FUNCintent.py
+++ b/TestON/tests/FUNCintent/FUNCintent.py
@@ -1075,29 +1075,36 @@
";\nThe test will use OF " + main.OFProtocol +\
" OVS running in Mininet"
- main.step( "NOOPTION: Add multi point to single point intents" )
- stepResult = main.TRUE
hostNames = [ 'h8', 'h16', 'h24' ]
devices = [ 'of:0000000000000005/8', 'of:0000000000000006/8', \
'of:0000000000000007/8' ]
macs = [ '00:00:00:00:00:08', '00:00:00:00:00:10', '00:00:00:00:00:18' ]
- stepResult = main.intentFunction.multiToSingleIntent(
- main,
- name="NOOPTION",
- hostNames=hostNames,
- devices=devices,
- sw1="s5",
- sw2="s2",
- expectedLink=18 )
- utilities.assert_equals( expect=main.TRUE,
- actual=stepResult,
- onpass="NOOPTION: Successfully added multi "
- + " point to single point intents" +
- " with no match action",
- onfail="NOOPTION: Failed to add multi point" +
- " to single point intents" +
- " with no match action" )
+ # This test as written attempts something that is impossible
+ # Multi to Single Raw intent cannot be bi-directional, so pings are not usable to test it
+ # This test should be re-written so that one multi-to-single NOOPTION
+ # intent is installed, with listeners at the destinations, so that one way
+ # packets can be detected
+ #
+ # main.step( "NOOPTION: Add multi point to single point intents" )
+ # stepResult = main.TRUE
+ # stepResult = main.intentFunction.multiToSingleIntent(
+ # main,
+ # name="NOOPTION",
+ # hostNames=hostNames,
+ # devices=devices,
+ # sw1="s5",
+ # sw2="s2",
+ # expectedLink=18 )
+ #
+ # utilities.assert_equals( expect=main.TRUE,
+ # actual=stepResult,
+ # onpass="NOOPTION: Successfully added multi "
+ # + " point to single point intents" +
+ # " with no match action",
+ # onfail="NOOPTION: Failed to add multi point" +
+ # " to single point intents" +
+ # " with no match action" )
main.step( "IPV4: Add multi point to single point intents" )
stepResult = main.TRUE