Added Switch failure test scenario + Styling review
Change-Id: I996e40c08a802c8301c0773fe0e5c48815ff17f5
diff --git a/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/README.md b/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/README.md
new file mode 100755
index 0000000..59c1214
--- /dev/null
+++ b/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/README.md
@@ -0,0 +1,16 @@
+This test verifies basic connectivity using SegmentRouting via pingall,
+it should not fail.
+
+It consists of
+
+1) Configure and Install ONOS
+2) Start Mininet and check flow state
+3) Pingall
+
+Requirements
+
+ - An updated version of the CPQD switch has to be running to make sure it supports group chaining.
+
+The test is executed using the netcfg subsystem:
+ 1) APPS=openflow-base,netcfghostprovider,netcfglinksprovider
+The topology is a 2x2 Leaf-spine
diff --git a/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/SRSwitchFailure.params b/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/SRSwitchFailure.params
new file mode 100755
index 0000000..8f3ade9
--- /dev/null
+++ b/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/SRSwitchFailure.params
@@ -0,0 +1,46 @@
+<PARAMS>
+
+ <testcases>1,2,4,5</testcases>
+
+ <SCALE>
+ <size>3</size>
+ <max>3</max>
+ </SCALE>
+
+ <DEPENDENCY>
+ <wrapper1>startUp</wrapper1>
+ <topology>cord_fabric.py</topology>
+ </DEPENDENCY>
+
+ <ENV>
+ <cellName>productionCell</cellName>
+ <cellApps>drivers,segmentrouting</cellApps>
+ <diffApps>openflow-base,netcfghostprovider,netcfglinksprovider</diffApps>
+ <cellUser>sdn</cellUser>
+ </ENV>
+
+ <GIT>
+ <pull>False</pull>
+ <branch>master</branch>
+ </GIT>
+
+ <CTRL>
+ <port>6653</port>
+ </CTRL>
+
+ <timers>
+ <LinkDiscovery>12</LinkDiscovery>
+ <SwitchDiscovery>12</SwitchDiscovery>
+ </timers>
+
+ <kill>
+ <switch> spine101 </switch>
+ <dpid> 000000000101 </dpid>
+ <links> leaf1 leaf2 </links>
+ </kill>
+
+ <SLEEP>
+ <startup>10</startup>
+ </SLEEP>
+
+</PARAMS>
diff --git a/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/SRSwitchFailure.py b/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/SRSwitchFailure.py
new file mode 100755
index 0000000..b516cc0
--- /dev/null
+++ b/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/SRSwitchFailure.py
@@ -0,0 +1,151 @@
+# In this test we perform a switch failure and then test for connectivity
+# CASE1: 2x2 topo + swtich failure + IP connectivity test
+# CASE2: 4x4 topo + switch failure + IP connectivity test
+# CASE4: 2x2 topo + 3-node ONOS CLUSTER + switch failure + IP connectivity test
+# CASE5: 4x4 topo + 3-node ONOS CLUSTER + switch failure + IP connectivity test
+
+class SRSwitchFailure:
+ def __init__( self ):
+ self.default = ''
+
+ def CASE1( self, main ):
+ """
+ Sets up 1-node Onos-cluster
+ Start 2x2 Leaf-Spine topology
+ Pingall
+ Cause switch failure
+ Pingall
+ """
+ from tests.USECASE.SegmentRouting.dependencies.Testcaselib import \
+ Testcaselib as run
+ if not hasattr( main, 'apps' ):
+ run.initTest( main )
+
+ description = "Bridging and Routing sanity test with 2x2 Leaf-spine "
+ main.case( description )
+
+ main.cfgName = '2x2'
+ main.numCtrls = 1
+ run.installOnos( main )
+ run.startMininet( main, 'cord_fabric.py' )
+ # pre-configured routing and bridging test
+ run.checkFlows( main, minFlowCount=116 )
+ run.pingAll( main )
+ # switch failure\
+ switch = main.params[ 'kill' ][ 'switch' ]
+ run.killSwitch( main, switch, switches='3', links='4' )
+ run.pingAll( main, "CASE1_Failure" )
+ run.recoverSwitch( main, switch, switches='4', links='8' )
+ run.checkFlows( main, minFlowCount=116 )
+ run.pingAll( main, "CASE1_Recovery" )
+ # TODO Dynamic config of hosts in subnet
+ # TODO Dynamic config of host not in subnet
+ # TODO Dynamic config of vlan xconnect
+ # TODO Vrouter integration
+ # TODO Mcast integration
+ run.cleanup( main )
+
+ def CASE2( self, main ):
+ """
+ Sets up 1-node Onos-cluster
+ Start 4x4 Leaf-Spine topology
+ Pingall
+ Cause switch failure
+ Pingall
+ """
+ from tests.USECASE.SegmentRouting.dependencies.Testcaselib import \
+ Testcaselib as run
+ if not hasattr( main, 'apps' ):
+ run.initTest( main )
+ description = "Bridging and Routing sanity test with 4x4 Leaf-spine "
+ main.case( description )
+ main.cfgName = '4x4'
+ main.numCtrls = 1
+ run.installOnos( main )
+ run.startMininet( main, 'cord_fabric.py', args="--leaf=4 --spine=4" )
+ # pre-configured routing and bridging test
+ run.checkFlows( main, minFlowCount=350 )
+ run.pingAll( main )
+ # switch failure
+ switch = main.params[ 'kill' ][ 'switch' ]
+ run.killSwitch( main, switch, switches='7', links='24' )
+ run.pingAll( main, "CASE2_Failure" )
+ run.recoverSwitch( main, switch, switches='8', links='32' )
+ run.checkFlows( main, minFlowCount=350 )
+ run.pingAll( main, "CASE2_Recovery" )
+ # TODO Dynamic config of hosts in subnet
+ # TODO Dynamic config of host not in subnet
+ # TODO preconfigured xconnect
+ # TODO Vrouter integration
+ # TODO Mcast integration
+ run.cleanup( main )
+
+ def CASE4( self, main ):
+ """
+ Sets up 3-node Onos-cluster
+ Start 2x2 Leaf-Spine topology
+ Pingall
+ Cause link failure
+ Pingall
+ """
+ from tests.USECASE.SegmentRouting.dependencies.Testcaselib import \
+ Testcaselib as run
+ if not hasattr( main, 'apps' ):
+ run.initTest( main )
+ description = "Bridging and Routing sanity test with 2x2 Leaf-spine "
+ main.case( description )
+ main.cfgName = '2x2'
+ main.numCtrls = 3
+ run.installOnos( main )
+ run.startMininet( main, 'cord_fabric.py' )
+ # pre-configured routing and bridging test
+ run.checkFlows( main, minFlowCount=116 )
+ run.pingAll( main )
+ # switch failure
+ switch = main.params[ 'kill' ][ 'switch' ]
+ run.killSwitch( main, switch, switches='3', links='4' )
+ run.pingAll( main, "CASE3_Failure" )
+ run.recoverSwitch( main, switch, switches='4', links='8' )
+ run.checkFlows( main, minFlowCount=116 )
+ run.pingAll( main, "CASE3_Recovery" )
+ # TODO Dynamic config of hosts in subnet
+ # TODO Dynamic config of host not in subnet
+ # TODO Dynamic config of vlan xconnect
+ # TODO Vrouter integration
+ # TODO Mcast integration
+ run.cleanup( main )
+
+ def CASE5( self, main ):
+ """
+ Sets up 1-node Onos-cluster
+ Start 4x4 Leaf-Spine topology
+ Pingall
+ Cause link failure
+ Pingall
+ """
+ from tests.USECASE.SegmentRouting.dependencies.Testcaselib import \
+ Testcaselib as run
+ if not hasattr( main, 'apps' ):
+ run.initTest( main )
+ description = "Bridging and Routing sanity test with 4x4 Leaf-spine "
+ main.case( description )
+ main.cfgName = '4x4'
+ main.numCtrls = 3
+ run.installOnos( main )
+ run.startMininet( main, 'cord_fabric.py', args="--leaf=4 --spine=4" )
+ # pre-configured routing and bridging test
+ run.checkFlows( main, minFlowCount=350 )
+ run.pingAll( main )
+ # switch failure
+ switch = main.params[ 'kill' ][ 'switch' ]
+ run.killSwitch( main, switch, switches='7', links='24' )
+ run.pingAll( main, "CASE4_Failure" )
+ run.recoverSwitch( main, switch, switches='8', links='32' )
+ run.checkFlows( main, minFlowCount=350 )
+ run.pingAll( main, "CASE4_Recovery" )
+ # TODO Dynamic config of hosts in subnet
+ # TODO Dynamic config of host not in subnet
+ # TODO preconfigured xconnect
+ # TODO Vrouter integration
+ # TODO Mcast integration
+ run.cleanup( main )
diff --git a/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/SRSwitchFailure.topo b/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/SRSwitchFailure.topo
new file mode 100755
index 0000000..2d69c35
--- /dev/null
+++ b/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/SRSwitchFailure.topo
@@ -0,0 +1,90 @@
+<TOPOLOGY>
+ <COMPONENT>
+
+ <ONOSbench>
+ <host>localhost</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>1</connect_order>
+ <COMPONENTS>
+ <nodes>1</nodes>
+ </COMPONENTS>
+ </ONOSbench>
+
+ <ONOScli1>
+ <host>OC1</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosCliDriver</type>
+ <connect_order>2</connect_order>
+ <COMPONENTS>
+ </COMPONENTS>
+ </ONOScli1>
+
+ <ONOScli2>
+ <host>OC2</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosCliDriver</type>
+ <connect_order>3</connect_order>
+ <COMPONENTS>
+ </COMPONENTS>
+ </ONOScli2>
+
+ <ONOScli3>
+ <host>OC3</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosCliDriver</type>
+ <connect_order>4</connect_order>
+ <COMPONENTS>
+ </COMPONENTS>
+ </ONOScli3>
+
+ <ONOSrest1>
+ <host>OC1</host>
+ <port>8181</port>
+ <user>onos</user>
+ <password>rocks</password>
+ <type>OnosRestDriver</type>
+ <connect_order>5</connect_order>
+ <COMPONENTS>
+ </COMPONENTS>
+ </ONOSrest1>
+
+ <ONOSrest2>
+ <host>OC2</host>
+ <port>8181</port>
+ <user>onos</user>
+ <password>rocks</password>
+ <type>OnosRestDriver</type>
+ <connect_order>6</connect_order>
+ <COMPONENTS>
+ </COMPONENTS>
+ </ONOSrest2>
+
+ <ONOSrest3>
+ <host>OC3</host>
+ <port>8181</port>
+ <user>onos</user>
+ <password>rocks</password>
+ <type>OnosRestDriver</type>
+ <connect_order>7</connect_order>
+ <COMPONENTS>
+ </COMPONENTS>
+ </ONOSrest3>
+
+ <Mininet1>
+ <host>OCN</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>MininetCliDriver</type>
+ <connect_order>8</connect_order>
+ <COMPONENTS>
+ <home>~/mininet/custom/</home>
+ </COMPONENTS>
+ </Mininet1>
+
+ </COMPONENT>
+</TOPOLOGY>
diff --git a/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/__init__.py b/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/__init__.py
new file mode 100755
index 0000000..e69de29
--- /dev/null
+++ b/TestON/tests/USECASE/SegmentRouting/SRSwitchFailure/__init__.py