Creating subfolders for test suites
allow teston to look in subfolders
create subfolders for current test suites
move tests into sub folders
create HA suite dependencies folder and moved all common files there
minor driver and test updates
standardize on the name dependencies for the directory
change from admin to sdn users
Conflicts:
TestON/tests/FUNC/FUNCipv6Intent/FUNCipv6Intent.topo
Change-Id: I849e45ab67da8b285c36c5fdf43b34323876e741
diff --git a/TestON/tests/HA/HAfullNetPartition/HAfullNetPartition.params b/TestON/tests/HA/HAfullNetPartition/HAfullNetPartition.params
new file mode 100644
index 0000000..478bff1
--- /dev/null
+++ b/TestON/tests/HA/HAfullNetPartition/HAfullNetPartition.params
@@ -0,0 +1,90 @@
+<PARAMS>
+ #List of test cases:
+ #CASE1: Compile ONOS and push it to the test machines
+ #CASE2: Assign devices to controllers
+ #CASE21: Assign mastership to controllers
+ #CASE3: Assign intents
+ #CASE4: Ping across added host intents
+ #CASE5: Reading state of ONOS
+ #CASE61: The Failure inducing case.
+ #CASE62: The Failure recovery case.
+ #CASE7: Check state after control plane failure
+ #CASE8: Compare topo
+ #CASE9: Link s3-s28 down
+ #CASE10: Link s3-s28 up
+ #CASE11: Switch down
+ #CASE12: Switch up
+ #CASE13: Clean up
+ #CASE14: start election app on all onos nodes
+ #CASE15: Check that Leadership Election is still functional
+ #CASE16: Install Distributed Primitives app
+ #CASE17: Check for basic functionality with distributed primitives
+ <testcases>1,[2,8,3,4,5,14,16,17]*1,[61,8,7,4,15,17,62],8,7,4,15,17,9,8,4,10,8,4,11,8,4,12,8,4,13</testcases>
+
+ <apps></apps>
+ <ONOS_Configuration>
+ <org.onosproject.net.intent.impl.compiler.IntentConfigurableRegistrator>
+ <useFlowObjectives>true</useFlowObjectives>
+ </org.onosproject.net.intent.impl.compiler.IntentConfigurableRegistrator>
+ </ONOS_Configuration>
+ <ENV>
+ <cellName>HA</cellName>
+ <appString>drivers,openflow,proxyarp,mobility</appString>
+ </ENV>
+ <Git> False </Git>
+ <branch> master </branch>
+ <num_controllers> 7 </num_controllers>
+ <tcpdump> False </tcpdump>
+
+ <CTRL>
+ <port1>6653</port1>
+ <port2>6653</port2>
+ <port3>6653</port3>
+ <port4>6653</port4>
+ <port5>6653</port5>
+ <port6>6653</port6>
+ <port7>6653</port7>
+ </CTRL>
+ <BACKUP>
+ <ENABLED> False </ENABLED>
+ <TESTONUSER>sdn</TESTONUSER>
+ <TESTONIP>10.128.30.9</TESTONIP>
+ </BACKUP>
+ <PING>
+ <source1>h8</source1>
+ <source2>h9</source2>
+ <source3>h10</source3>
+ <source4>h11</source4>
+ <source5>h12</source5>
+ <source6>h13</source6>
+ <source7>h14</source7>
+ <source8>h15</source8>
+ <source9>h16</source9>
+ <source10>h17</source10>
+ <target1>10.0.0.18</target1>
+ <target2>10.0.0.19</target2>
+ <target3>10.0.0.20</target3>
+ <target4>10.0.0.21</target4>
+ <target5>10.0.0.22</target5>
+ <target6>10.0.0.23</target6>
+ <target7>10.0.0.24</target7>
+ <target8>10.0.0.25</target8>
+ <target9>10.0.0.26</target9>
+ <target10>10.0.0.27</target10>
+ </PING>
+ <timers>
+ <LinkDiscovery>12</LinkDiscovery>
+ <SwitchDiscovery>12</SwitchDiscovery>
+ <gossip>5</gossip>
+ </timers>
+ <kill>
+ <switch> s5 </switch>
+ <dpid> 0000000000005000 </dpid>
+ <links> h5 s2 s1 s6 </links>
+ </kill>
+ <MNtcpdump>
+ <intf>eth0</intf>
+ <port> </port>
+ <folder>~/packet_captures/</folder>
+ </MNtcpdump>
+</PARAMS>
diff --git a/TestON/tests/HA/HAfullNetPartition/HAfullNetPartition.py b/TestON/tests/HA/HAfullNetPartition/HAfullNetPartition.py
new file mode 100644
index 0000000..dd1e1fb
--- /dev/null
+++ b/TestON/tests/HA/HAfullNetPartition/HAfullNetPartition.py
@@ -0,0 +1,4226 @@
+"""
+Description: This test is to determine if ONOS can handle
+ a full network partion
+
+List of test cases:
+CASE1: Compile ONOS and push it to the test machines
+CASE2: Assign devices to controllers
+CASE21: Assign mastership to controllers
+CASE3: Assign intents
+CASE4: Ping across added host intents
+CASE5: Reading state of ONOS
+CASE61: The Failure inducing case.
+CASE62: The Failure recovery case.
+CASE7: Check state after control plane failure
+CASE8: Compare topo
+CASE9: Link s3-s28 down
+CASE10: Link s3-s28 up
+CASE11: Switch down
+CASE12: Switch up
+CASE13: Clean up
+CASE14: start election app on all onos nodes
+CASE15: Check that Leadership Election is still functional
+CASE16: Install Distributed Primitives app
+CASE17: Check for basic functionality with distributed primitives
+"""
+
+
+class HAfullNetPartition:
+
+ def __init__( self ):
+ self.default = ''
+
+ def CASE1( self, main ):
+ """
+ CASE1 is to compile ONOS and push it to the test machines
+
+ Startup sequence:
+ cell <name>
+ onos-verify-cell
+ NOTE: temporary - onos-remove-raft-logs
+ onos-uninstall
+ start mininet
+ git pull
+ mvn clean install
+ onos-package
+ onos-install -f
+ onos-wait-for-start
+ start cli sessions
+ start tcpdump
+ """
+ import imp
+ import pexpect
+ import time
+ import json
+ main.log.info( "ONOS HA test: Partition ONOS nodes into two sub-clusters - " +
+ "initialization" )
+ main.case( "Setting up test environment" )
+ main.caseExplanation = "Setup the test environment including " +\
+ "installing ONOS, starting Mininet and ONOS" +\
+ "cli sessions."
+
+ # load some variables from the params file
+ PULLCODE = False
+ if main.params[ 'Git' ] == 'True':
+ PULLCODE = True
+ gitBranch = main.params[ 'branch' ]
+ cellName = main.params[ 'ENV' ][ 'cellName' ]
+
+ main.numCtrls = int( main.params[ 'num_controllers' ] )
+ if main.ONOSbench.maxNodes:
+ if main.ONOSbench.maxNodes < main.numCtrls:
+ main.numCtrls = int( main.ONOSbench.maxNodes )
+ # set global variables
+ global ONOS1Port
+ global ONOS2Port
+ global ONOS3Port
+ global ONOS4Port
+ global ONOS5Port
+ global ONOS6Port
+ global ONOS7Port
+ # These are for csv plotting in jenkins
+ global labels
+ global data
+ labels = []
+ data = []
+
+ # FIXME: just get controller port from params?
+ # TODO: do we really need all these?
+ ONOS1Port = main.params[ 'CTRL' ][ 'port1' ]
+ ONOS2Port = main.params[ 'CTRL' ][ 'port2' ]
+ ONOS3Port = main.params[ 'CTRL' ][ 'port3' ]
+ ONOS4Port = main.params[ 'CTRL' ][ 'port4' ]
+ ONOS5Port = main.params[ 'CTRL' ][ 'port5' ]
+ ONOS6Port = main.params[ 'CTRL' ][ 'port6' ]
+ ONOS7Port = main.params[ 'CTRL' ][ 'port7' ]
+
+ try:
+ from tests.HA.dependencies.HA import HA
+ main.HA = HA()
+ except Exception as e:
+ main.log.exception( e )
+ main.cleanup()
+ main.exit()
+
+ main.CLIs = []
+ main.nodes = []
+ ipList = []
+ for i in range( 1, main.numCtrls + 1 ):
+ try:
+ main.CLIs.append( getattr( main, 'ONOScli' + str( i ) ) )
+ main.nodes.append( getattr( main, 'ONOS' + str( i ) ) )
+ ipList.append( main.nodes[ -1 ].ip_address )
+ except AttributeError:
+ break
+
+ main.step( "Create cell file" )
+ cellAppString = main.params[ 'ENV' ][ 'appString' ]
+ main.ONOSbench.createCellFile( main.ONOSbench.ip_address, cellName,
+ main.Mininet1.ip_address,
+ cellAppString, ipList )
+ main.step( "Applying cell variable to environment" )
+ cellResult = main.ONOSbench.setCell( cellName )
+ verifyResult = main.ONOSbench.verifyCell()
+
+ # FIXME:this is short term fix
+ main.log.info( "Removing raft logs" )
+ main.ONOSbench.onosRemoveRaftLogs()
+
+ main.log.info( "Uninstalling ONOS" )
+ for node in main.nodes:
+ main.ONOSbench.onosUninstall( node.ip_address )
+
+ # Make sure ONOS is DEAD
+ main.log.info( "Killing any ONOS processes" )
+ killResults = main.TRUE
+ for node in main.nodes:
+ killed = main.ONOSbench.onosKill( node.ip_address )
+ killResults = killResults and killed
+
+ cleanInstallResult = main.TRUE
+ gitPullResult = main.TRUE
+
+ main.step( "Starting Mininet" )
+ # scp topo file to mininet
+ # TODO: move to params?
+ topoName = "obelisk.py"
+ filePath = main.ONOSbench.home + "/tools/test/topos/"
+ main.ONOSbench.scp( main.Mininet1,
+ filePath + topoName,
+ main.Mininet1.home,
+ direction="to" )
+ mnResult = main.Mininet1.startNet( )
+ utilities.assert_equals( expect=main.TRUE, actual=mnResult,
+ onpass="Mininet Started",
+ onfail="Error starting Mininet" )
+
+ main.step( "Git checkout and pull " + gitBranch )
+ if PULLCODE:
+ main.ONOSbench.gitCheckout( gitBranch )
+ gitPullResult = main.ONOSbench.gitPull()
+ # values of 1 or 3 are good
+ utilities.assert_lesser( expect=0, actual=gitPullResult,
+ onpass="Git pull successful",
+ onfail="Git pull failed" )
+ main.ONOSbench.getVersion( report=True )
+
+ main.step( "Using mvn clean install" )
+ cleanInstallResult = main.TRUE
+ if PULLCODE and gitPullResult == main.TRUE:
+ cleanInstallResult = main.ONOSbench.cleanInstall()
+ else:
+ main.log.warn( "Did not pull new code so skipping mvn " +
+ "clean install" )
+ utilities.assert_equals( expect=main.TRUE,
+ actual=cleanInstallResult,
+ onpass="MCI successful",
+ onfail="MCI failed" )
+ # GRAPHS
+ # NOTE: important params here:
+ # job = name of Jenkins job
+ # Plot Name = Plot-HA, only can be used if multiple plots
+ # index = The number of the graph under plot name
+ job = "HAfullNetPartition"
+ plotName = "Plot-HA"
+ index = "1"
+ graphs = '<ac:structured-macro ac:name="html">\n'
+ graphs += '<ac:plain-text-body><![CDATA[\n'
+ graphs += '<iframe src="https://onos-jenkins.onlab.us/job/' + job +\
+ '/plot/' + plotName + '/getPlot?index=' + index +\
+ '&width=500&height=300"' +\
+ 'noborder="0" width="500" height="300" scrolling="yes" ' +\
+ 'seamless="seamless"></iframe>\n'
+ graphs += ']]></ac:plain-text-body>\n'
+ graphs += '</ac:structured-macro>\n'
+ main.log.wiki(graphs)
+
+ main.step( "Creating ONOS package" )
+ # copy gen-partions file to ONOS
+ # NOTE: this assumes TestON and ONOS are on the same machine
+ srcFile = main.testDir + "/HA/dependencies/onos-gen-partitions"
+ dstDir = main.ONOSbench.home + "/tools/test/bin/onos-gen-partitions"
+ cpResult = main.ONOSbench.secureCopy( main.ONOSbench.user_name,
+ main.ONOSbench.ip_address,
+ srcFile,
+ dstDir,
+ pwd=main.ONOSbench.pwd,
+ direction="from" )
+ packageResult = main.ONOSbench.onosPackage()
+ utilities.assert_equals( expect=main.TRUE, actual=packageResult,
+ onpass="ONOS package successful",
+ onfail="ONOS package failed" )
+
+ main.step( "Installing ONOS package" )
+ onosInstallResult = main.TRUE
+ for node in main.nodes:
+ tmpResult = main.ONOSbench.onosInstall( options="-f",
+ node=node.ip_address )
+ onosInstallResult = onosInstallResult and tmpResult
+ utilities.assert_equals( expect=main.TRUE, actual=onosInstallResult,
+ onpass="ONOS install successful",
+ onfail="ONOS install failed" )
+ # clean up gen-partitions file
+ try:
+ main.ONOSbench.handle.sendline( "cd " + main.ONOSbench.home )
+ main.ONOSbench.handle.expect( main.ONOSbench.home + "\$" )
+ main.ONOSbench.handle.sendline( "git checkout -- tools/test/bin/onos-gen-partitions" )
+ main.ONOSbench.handle.expect( main.ONOSbench.home + "\$" )
+ main.log.info( " Cleaning custom gen partitions file, response was: \n" +
+ str( main.ONOSbench.handle.before ) )
+ except ( pexpect.TIMEOUT, pexpect.EOF ):
+ main.log.exception( "ONOSbench: pexpect exception found:" +
+ main.ONOSbench.handle.before )
+ main.cleanup()
+ main.exit()
+
+ main.step( "Checking if ONOS is up yet" )
+ for i in range( 2 ):
+ onosIsupResult = main.TRUE
+ for node in main.nodes:
+ started = main.ONOSbench.isup( node.ip_address )
+ if not started:
+ main.log.error( node.name + " hasn't started" )
+ onosIsupResult = onosIsupResult and started
+ if onosIsupResult == main.TRUE:
+ break
+ utilities.assert_equals( expect=main.TRUE, actual=onosIsupResult,
+ onpass="ONOS startup successful",
+ onfail="ONOS startup failed" )
+
+ main.log.step( "Starting ONOS CLI sessions" )
+ cliResults = main.TRUE
+ threads = []
+ for i in range( main.numCtrls ):
+ t = main.Thread( target=main.CLIs[i].startOnosCli,
+ name="startOnosCli-" + str( i ),
+ args=[main.nodes[i].ip_address] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ cliResults = cliResults and t.result
+ utilities.assert_equals( expect=main.TRUE, actual=cliResults,
+ onpass="ONOS cli startup successful",
+ onfail="ONOS cli startup failed" )
+
+ # Create a list of active nodes for use when some nodes are stopped
+ main.activeNodes = [ i for i in range( 0, len( main.CLIs ) ) ]
+
+ if main.params[ 'tcpdump' ].lower() == "true":
+ main.step( "Start Packet Capture MN" )
+ main.Mininet2.startTcpdump(
+ str( main.params[ 'MNtcpdump' ][ 'folder' ] ) + str( main.TEST )
+ + "-MN.pcap",
+ intf=main.params[ 'MNtcpdump' ][ 'intf' ],
+ port=main.params[ 'MNtcpdump' ][ 'port' ] )
+
+ main.step( "Checking ONOS nodes" )
+ nodeResults = utilities.retry( main.HA.nodesCheck,
+ False,
+ args=[main.activeNodes],
+ attempts=5 )
+
+ utilities.assert_equals( expect=True, actual=nodeResults,
+ onpass="Nodes check successful",
+ onfail="Nodes check NOT successful" )
+
+ if not nodeResults:
+ for cli in main.CLIs:
+ main.log.debug( "{} components not ACTIVE: \n{}".format(
+ cli.name,
+ cli.sendline( "scr:list | grep -v ACTIVE" ) ) )
+
+ if cliResults == main.FALSE:
+ main.log.error( "Failed to start ONOS, stopping test" )
+ main.cleanup()
+ main.exit()
+
+ main.step( "Activate apps defined in the params file" )
+ # get data from the params
+ apps = main.params.get( 'apps' )
+ if apps:
+ apps = apps.split(',')
+ main.log.warn( apps )
+ activateResult = True
+ for app in apps:
+ main.CLIs[ 0 ].app( app, "Activate" )
+ # TODO: check this worked
+ time.sleep( 10 ) # wait for apps to activate
+ for app in apps:
+ state = main.CLIs[ 0 ].appStatus( app )
+ if state == "ACTIVE":
+ activateResult = activeResult and True
+ else:
+ main.log.error( "{} is in {} state".format( app, state ) )
+ activeResult = False
+ utilities.assert_equals( expect=True,
+ actual=activateResult,
+ onpass="Successfully activated apps",
+ onfail="Failed to activate apps" )
+ else:
+ main.log.warn( "No apps were specified to be loaded after startup" )
+
+ main.step( "Set ONOS configurations" )
+ config = main.params.get( 'ONOS_Configuration' )
+ if config:
+ main.log.debug( config )
+ checkResult = main.TRUE
+ for component in config:
+ for setting in config[component]:
+ value = config[component][setting]
+ check = main.CLIs[ 0 ].setCfg( component, setting, value )
+ main.log.info( "Value was changed? {}".format( main.TRUE == check ) )
+ checkResult = check and checkResult
+ utilities.assert_equals( expect=main.TRUE,
+ actual=checkResult,
+ onpass="Successfully set config",
+ onfail="Failed to set config" )
+ else:
+ main.log.warn( "No configurations were specified to be changed after startup" )
+
+ main.step( "App Ids check" )
+ appCheck = main.TRUE
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].appToIDCheck,
+ name="appToIDCheck-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ appCheck = appCheck and t.result
+ if appCheck != main.TRUE:
+ node = main.activeNodes[0]
+ main.log.warn( main.CLIs[node].apps() )
+ main.log.warn( main.CLIs[node].appIDs() )
+ utilities.assert_equals( expect=main.TRUE, actual=appCheck,
+ onpass="App Ids seem to be correct",
+ onfail="Something is wrong with app Ids" )
+
+ def CASE2( self, main ):
+ """
+ Assign devices to controllers
+ """
+ import re
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+ assert ONOS1Port, "ONOS1Port not defined"
+ assert ONOS2Port, "ONOS2Port not defined"
+ assert ONOS3Port, "ONOS3Port not defined"
+ assert ONOS4Port, "ONOS4Port not defined"
+ assert ONOS5Port, "ONOS5Port not defined"
+ assert ONOS6Port, "ONOS6Port not defined"
+ assert ONOS7Port, "ONOS7Port not defined"
+
+ main.case( "Assigning devices to controllers" )
+ main.caseExplanation = "Assign switches to ONOS using 'ovs-vsctl' " +\
+ "and check that an ONOS node becomes the " +\
+ "master of the device."
+ main.step( "Assign switches to controllers" )
+
+ ipList = []
+ for i in range( main.numCtrls ):
+ ipList.append( main.nodes[ i ].ip_address )
+ swList = []
+ for i in range( 1, 29 ):
+ swList.append( "s" + str( i ) )
+ main.Mininet1.assignSwController( sw=swList, ip=ipList )
+
+ mastershipCheck = main.TRUE
+ for i in range( 1, 29 ):
+ response = main.Mininet1.getSwController( "s" + str( i ) )
+ try:
+ main.log.info( str( response ) )
+ except Exception:
+ main.log.info( repr( response ) )
+ for node in main.nodes:
+ if re.search( "tcp:" + node.ip_address, response ):
+ mastershipCheck = mastershipCheck and main.TRUE
+ else:
+ main.log.error( "Error, node " + node.ip_address + " is " +
+ "not in the list of controllers s" +
+ str( i ) + " is connecting to." )
+ mastershipCheck = main.FALSE
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=mastershipCheck,
+ onpass="Switch mastership assigned correctly",
+ onfail="Switches not assigned correctly to controllers" )
+
+ def CASE21( self, main ):
+ """
+ Assign mastership to controllers
+ """
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+ assert ONOS1Port, "ONOS1Port not defined"
+ assert ONOS2Port, "ONOS2Port not defined"
+ assert ONOS3Port, "ONOS3Port not defined"
+ assert ONOS4Port, "ONOS4Port not defined"
+ assert ONOS5Port, "ONOS5Port not defined"
+ assert ONOS6Port, "ONOS6Port not defined"
+ assert ONOS7Port, "ONOS7Port not defined"
+
+ main.case( "Assigning Controller roles for switches" )
+ main.caseExplanation = "Check that ONOS is connected to each " +\
+ "device. Then manually assign" +\
+ " mastership to specific ONOS nodes using" +\
+ " 'device-role'"
+ main.step( "Assign mastership of switches to specific controllers" )
+ # Manually assign mastership to the controller we want
+ roleCall = main.TRUE
+
+ ipList = [ ]
+ deviceList = []
+ onosCli = main.CLIs[ main.activeNodes[0] ]
+ try:
+ # Assign mastership to specific controllers. This assignment was
+ # determined for a 7 node cluser, but will work with any sized
+ # cluster
+ for i in range( 1, 29 ): # switches 1 through 28
+ # set up correct variables:
+ if i == 1:
+ c = 0
+ ip = main.nodes[ c ].ip_address # ONOS1
+ deviceId = onosCli.getDevice( "1000" ).get( 'id' )
+ elif i == 2:
+ c = 1 % main.numCtrls
+ ip = main.nodes[ c ].ip_address # ONOS2
+ deviceId = onosCli.getDevice( "2000" ).get( 'id' )
+ elif i == 3:
+ c = 1 % main.numCtrls
+ ip = main.nodes[ c ].ip_address # ONOS2
+ deviceId = onosCli.getDevice( "3000" ).get( 'id' )
+ elif i == 4:
+ c = 3 % main.numCtrls
+ ip = main.nodes[ c ].ip_address # ONOS4
+ deviceId = onosCli.getDevice( "3004" ).get( 'id' )
+ elif i == 5:
+ c = 2 % main.numCtrls
+ ip = main.nodes[ c ].ip_address # ONOS3
+ deviceId = onosCli.getDevice( "5000" ).get( 'id' )
+ elif i == 6:
+ c = 2 % main.numCtrls
+ ip = main.nodes[ c ].ip_address # ONOS3
+ deviceId = onosCli.getDevice( "6000" ).get( 'id' )
+ elif i == 7:
+ c = 5 % main.numCtrls
+ ip = main.nodes[ c ].ip_address # ONOS6
+ deviceId = onosCli.getDevice( "6007" ).get( 'id' )
+ elif i >= 8 and i <= 17:
+ c = 4 % main.numCtrls
+ ip = main.nodes[ c ].ip_address # ONOS5
+ dpid = '3' + str( i ).zfill( 3 )
+ deviceId = onosCli.getDevice( dpid ).get( 'id' )
+ elif i >= 18 and i <= 27:
+ c = 6 % main.numCtrls
+ ip = main.nodes[ c ].ip_address # ONOS7
+ dpid = '6' + str( i ).zfill( 3 )
+ deviceId = onosCli.getDevice( dpid ).get( 'id' )
+ elif i == 28:
+ c = 0
+ ip = main.nodes[ c ].ip_address # ONOS1
+ deviceId = onosCli.getDevice( "2800" ).get( 'id' )
+ else:
+ main.log.error( "You didn't write an else statement for " +
+ "switch s" + str( i ) )
+ roleCall = main.FALSE
+ # Assign switch
+ assert deviceId, "No device id for s" + str( i ) + " in ONOS"
+ # TODO: make this controller dynamic
+ roleCall = roleCall and onosCli.deviceRole( deviceId, ip )
+ ipList.append( ip )
+ deviceList.append( deviceId )
+ except ( AttributeError, AssertionError ):
+ main.log.exception( "Something is wrong with ONOS device view" )
+ main.log.info( onosCli.devices() )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=roleCall,
+ onpass="Re-assigned switch mastership to designated controller",
+ onfail="Something wrong with deviceRole calls" )
+
+ main.step( "Check mastership was correctly assigned" )
+ roleCheck = main.TRUE
+ # NOTE: This is due to the fact that device mastership change is not
+ # atomic and is actually a multi step process
+ time.sleep( 5 )
+ for i in range( len( ipList ) ):
+ ip = ipList[i]
+ deviceId = deviceList[i]
+ # Check assignment
+ master = onosCli.getRole( deviceId ).get( 'master' )
+ if ip in master:
+ roleCheck = roleCheck and main.TRUE
+ else:
+ roleCheck = roleCheck and main.FALSE
+ main.log.error( "Error, controller " + ip + " is not" +
+ " master " + "of device " +
+ str( deviceId ) + ". Master is " +
+ repr( master ) + "." )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=roleCheck,
+ onpass="Switches were successfully reassigned to designated " +
+ "controller",
+ onfail="Switches were not successfully reassigned" )
+
+ def CASE3( self, main ):
+ """
+ Assign intents
+ """
+ import time
+ import json
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+ main.case( "Adding host Intents" )
+ main.caseExplanation = "Discover hosts by using pingall then " +\
+ "assign predetermined host-to-host intents." +\
+ " After installation, check that the intent" +\
+ " is distributed to all nodes and the state" +\
+ " is INSTALLED"
+
+ # install onos-app-fwd
+ main.step( "Install reactive forwarding app" )
+ onosCli = main.CLIs[ main.activeNodes[0] ]
+ installResults = onosCli.activateApp( "org.onosproject.fwd" )
+ utilities.assert_equals( expect=main.TRUE, actual=installResults,
+ onpass="Install fwd successful",
+ onfail="Install fwd failed" )
+
+ main.step( "Check app ids" )
+ appCheck = main.TRUE
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].appToIDCheck,
+ name="appToIDCheck-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ appCheck = appCheck and t.result
+ if appCheck != main.TRUE:
+ main.log.warn( onosCli.apps() )
+ main.log.warn( onosCli.appIDs() )
+ utilities.assert_equals( expect=main.TRUE, actual=appCheck,
+ onpass="App Ids seem to be correct",
+ onfail="Something is wrong with app Ids" )
+
+ main.step( "Discovering Hosts( Via pingall for now )" )
+ # FIXME: Once we have a host discovery mechanism, use that instead
+ # REACTIVE FWD test
+ pingResult = main.FALSE
+ passMsg = "Reactive Pingall test passed"
+ time1 = time.time()
+ pingResult = main.Mininet1.pingall()
+ time2 = time.time()
+ if not pingResult:
+ main.log.warn("First pingall failed. Trying again...")
+ pingResult = main.Mininet1.pingall()
+ passMsg += " on the second try"
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=pingResult,
+ onpass= passMsg,
+ onfail="Reactive Pingall failed, " +
+ "one or more ping pairs failed" )
+ main.log.info( "Time for pingall: %2f seconds" %
+ ( time2 - time1 ) )
+ # timeout for fwd flows
+ time.sleep( 11 )
+ # uninstall onos-app-fwd
+ main.step( "Uninstall reactive forwarding app" )
+ node = main.activeNodes[0]
+ uninstallResult = main.CLIs[node].deactivateApp( "org.onosproject.fwd" )
+ utilities.assert_equals( expect=main.TRUE, actual=uninstallResult,
+ onpass="Uninstall fwd successful",
+ onfail="Uninstall fwd failed" )
+
+ main.step( "Check app ids" )
+ threads = []
+ appCheck2 = main.TRUE
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].appToIDCheck,
+ name="appToIDCheck-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ appCheck2 = appCheck2 and t.result
+ if appCheck2 != main.TRUE:
+ node = main.activeNodes[0]
+ main.log.warn( main.CLIs[node].apps() )
+ main.log.warn( main.CLIs[node].appIDs() )
+ utilities.assert_equals( expect=main.TRUE, actual=appCheck2,
+ onpass="App Ids seem to be correct",
+ onfail="Something is wrong with app Ids" )
+
+ main.step( "Add host intents via cli" )
+ intentIds = []
+ # TODO: move the host numbers to params
+ # Maybe look at all the paths we ping?
+ intentAddResult = True
+ hostResult = main.TRUE
+ for i in range( 8, 18 ):
+ main.log.info( "Adding host intent between h" + str( i ) +
+ " and h" + str( i + 10 ) )
+ host1 = "00:00:00:00:00:" + \
+ str( hex( i )[ 2: ] ).zfill( 2 ).upper()
+ host2 = "00:00:00:00:00:" + \
+ str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper()
+ # NOTE: getHost can return None
+ host1Dict = onosCli.getHost( host1 )
+ host2Dict = onosCli.getHost( host2 )
+ host1Id = None
+ host2Id = None
+ if host1Dict and host2Dict:
+ host1Id = host1Dict.get( 'id', None )
+ host2Id = host2Dict.get( 'id', None )
+ if host1Id and host2Id:
+ nodeNum = ( i % len( main.activeNodes ) )
+ node = main.activeNodes[nodeNum]
+ tmpId = main.CLIs[node].addHostIntent( host1Id, host2Id )
+ if tmpId:
+ main.log.info( "Added intent with id: " + tmpId )
+ intentIds.append( tmpId )
+ else:
+ main.log.error( "addHostIntent returned: " +
+ repr( tmpId ) )
+ else:
+ main.log.error( "Error, getHost() failed for h" + str( i ) +
+ " and/or h" + str( i + 10 ) )
+ node = main.activeNodes[0]
+ hosts = main.CLIs[node].hosts()
+ main.log.warn( "Hosts output: " )
+ try:
+ main.log.warn( json.dumps( json.loads( hosts ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.warn( repr( hosts ) )
+ hostResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE, actual=hostResult,
+ onpass="Found a host id for each host",
+ onfail="Error looking up host ids" )
+
+ intentStart = time.time()
+ onosIds = onosCli.getAllIntentsId()
+ main.log.info( "Submitted intents: " + str( intentIds ) )
+ main.log.info( "Intents in ONOS: " + str( onosIds ) )
+ for intent in intentIds:
+ if intent in onosIds:
+ pass # intent submitted is in onos
+ else:
+ intentAddResult = False
+ if intentAddResult:
+ intentStop = time.time()
+ else:
+ intentStop = None
+ # Print the intent states
+ intents = onosCli.intents()
+ intentStates = []
+ installedCheck = True
+ main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
+ count = 0
+ try:
+ for intent in json.loads( intents ):
+ state = intent.get( 'state', None )
+ if "INSTALLED" not in state:
+ installedCheck = False
+ intentId = intent.get( 'id', None )
+ intentStates.append( ( intentId, state ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing intents" )
+ # add submitted intents not in the store
+ tmplist = [ i for i, s in intentStates ]
+ missingIntents = False
+ for i in intentIds:
+ if i not in tmplist:
+ intentStates.append( ( i, " - " ) )
+ missingIntents = True
+ intentStates.sort()
+ for i, s in intentStates:
+ count += 1
+ main.log.info( "%-6s%-15s%-15s" %
+ ( str( count ), str( i ), str( s ) ) )
+ leaders = onosCli.leaders()
+ try:
+ missing = False
+ if leaders:
+ parsedLeaders = json.loads( leaders )
+ main.log.warn( json.dumps( parsedLeaders,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # check for all intent partitions
+ topics = []
+ for i in range( 14 ):
+ topics.append( "intent-partition-" + str( i ) )
+ main.log.debug( topics )
+ ONOStopics = [ j['topic'] for j in parsedLeaders ]
+ for topic in topics:
+ if topic not in ONOStopics:
+ main.log.error( "Error: " + topic +
+ " not in leaders" )
+ missing = True
+ else:
+ main.log.error( "leaders() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing leaders" )
+ main.log.error( repr( leaders ) )
+ # Check all nodes
+ if missing:
+ for i in main.activeNodes:
+ response = main.CLIs[i].leaders( jsonFormat=False)
+ main.log.warn( str( main.CLIs[i].name ) + " leaders output: \n" +
+ str( response ) )
+
+ partitions = onosCli.partitions()
+ try:
+ if partitions :
+ parsedPartitions = json.loads( partitions )
+ main.log.warn( json.dumps( parsedPartitions,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check for a leader in all paritions
+ # TODO check for consistency among nodes
+ else:
+ main.log.error( "partitions() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing partitions" )
+ main.log.error( repr( partitions ) )
+ pendingMap = onosCli.pendingMap()
+ try:
+ if pendingMap :
+ parsedPending = json.loads( pendingMap )
+ main.log.warn( json.dumps( parsedPending,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check something here?
+ else:
+ main.log.error( "pendingMap() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing pending map" )
+ main.log.error( repr( pendingMap ) )
+
+ intentAddResult = bool( intentAddResult and not missingIntents and
+ installedCheck )
+ if not intentAddResult:
+ main.log.error( "Error in pushing host intents to ONOS" )
+
+ main.step( "Intent Anti-Entropy dispersion" )
+ for j in range(100):
+ correct = True
+ main.log.info( "Submitted intents: " + str( sorted( intentIds ) ) )
+ for i in main.activeNodes:
+ onosIds = []
+ ids = main.CLIs[i].getAllIntentsId()
+ onosIds.append( ids )
+ main.log.debug( "Intents in " + main.CLIs[i].name + ": " +
+ str( sorted( onosIds ) ) )
+ if sorted( ids ) != sorted( intentIds ):
+ main.log.warn( "Set of intent IDs doesn't match" )
+ correct = False
+ break
+ else:
+ intents = json.loads( main.CLIs[i].intents() )
+ for intent in intents:
+ if intent[ 'state' ] != "INSTALLED":
+ main.log.warn( "Intent " + intent[ 'id' ] +
+ " is " + intent[ 'state' ] )
+ correct = False
+ break
+ if correct:
+ break
+ else:
+ time.sleep(1)
+ if not intentStop:
+ intentStop = time.time()
+ global gossipTime
+ gossipTime = intentStop - intentStart
+ main.log.info( "It took about " + str( gossipTime ) +
+ " seconds for all intents to appear in each node" )
+ gossipPeriod = int( main.params['timers']['gossip'] )
+ maxGossipTime = gossipPeriod * len( main.activeNodes )
+ utilities.assert_greater_equals(
+ expect=maxGossipTime, actual=gossipTime,
+ onpass="ECM anti-entropy for intents worked within " +
+ "expected time",
+ onfail="Intent ECM anti-entropy took too long. " +
+ "Expected time:{}, Actual time:{}".format( maxGossipTime,
+ gossipTime ) )
+ if gossipTime <= maxGossipTime:
+ intentAddResult = True
+
+ if not intentAddResult or "key" in pendingMap:
+ import time
+ installedCheck = True
+ main.log.info( "Sleeping 60 seconds to see if intents are found" )
+ time.sleep( 60 )
+ onosIds = onosCli.getAllIntentsId()
+ main.log.info( "Submitted intents: " + str( intentIds ) )
+ main.log.info( "Intents in ONOS: " + str( onosIds ) )
+ # Print the intent states
+ intents = onosCli.intents()
+ intentStates = []
+ main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
+ count = 0
+ try:
+ for intent in json.loads( intents ):
+ # Iter through intents of a node
+ state = intent.get( 'state', None )
+ if "INSTALLED" not in state:
+ installedCheck = False
+ intentId = intent.get( 'id', None )
+ intentStates.append( ( intentId, state ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing intents" )
+ # add submitted intents not in the store
+ tmplist = [ i for i, s in intentStates ]
+ for i in intentIds:
+ if i not in tmplist:
+ intentStates.append( ( i, " - " ) )
+ intentStates.sort()
+ for i, s in intentStates:
+ count += 1
+ main.log.info( "%-6s%-15s%-15s" %
+ ( str( count ), str( i ), str( s ) ) )
+ leaders = onosCli.leaders()
+ try:
+ missing = False
+ if leaders:
+ parsedLeaders = json.loads( leaders )
+ main.log.warn( json.dumps( parsedLeaders,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # check for all intent partitions
+ # check for election
+ topics = []
+ for i in range( 14 ):
+ topics.append( "intent-partition-" + str( i ) )
+ # FIXME: this should only be after we start the app
+ topics.append( "org.onosproject.election" )
+ main.log.debug( topics )
+ ONOStopics = [ j['topic'] for j in parsedLeaders ]
+ for topic in topics:
+ if topic not in ONOStopics:
+ main.log.error( "Error: " + topic +
+ " not in leaders" )
+ missing = True
+ else:
+ main.log.error( "leaders() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing leaders" )
+ main.log.error( repr( leaders ) )
+ # Check all nodes
+ if missing:
+ for i in main.activeNodes:
+ node = main.CLIs[i]
+ response = node.leaders( jsonFormat=False)
+ main.log.warn( str( node.name ) + " leaders output: \n" +
+ str( response ) )
+
+ partitions = onosCli.partitions()
+ try:
+ if partitions :
+ parsedPartitions = json.loads( partitions )
+ main.log.warn( json.dumps( parsedPartitions,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check for a leader in all paritions
+ # TODO check for consistency among nodes
+ else:
+ main.log.error( "partitions() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing partitions" )
+ main.log.error( repr( partitions ) )
+ pendingMap = onosCli.pendingMap()
+ try:
+ if pendingMap :
+ parsedPending = json.loads( pendingMap )
+ main.log.warn( json.dumps( parsedPending,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check something here?
+ else:
+ main.log.error( "pendingMap() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing pending map" )
+ main.log.error( repr( pendingMap ) )
+
+ def CASE4( self, main ):
+ """
+ Ping across added host intents
+ """
+ import json
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+ main.case( "Verify connectivity by sending traffic across Intents" )
+ main.caseExplanation = "Ping across added host intents to check " +\
+ "functionality and check the state of " +\
+ "the intent"
+
+ onosCli = main.CLIs[ main.activeNodes[0] ]
+ main.step( "Check Intent state" )
+ installedCheck = False
+ loopCount = 0
+ while not installedCheck and loopCount < 40:
+ installedCheck = True
+ # Print the intent states
+ intents = onosCli.intents()
+ intentStates = []
+ main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
+ count = 0
+ # Iter through intents of a node
+ try:
+ for intent in json.loads( intents ):
+ state = intent.get( 'state', None )
+ if "INSTALLED" not in state:
+ installedCheck = False
+ intentId = intent.get( 'id', None )
+ intentStates.append( ( intentId, state ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing intents." )
+ # Print states
+ intentStates.sort()
+ for i, s in intentStates:
+ count += 1
+ main.log.info( "%-6s%-15s%-15s" %
+ ( str( count ), str( i ), str( s ) ) )
+ if not installedCheck:
+ time.sleep( 1 )
+ loopCount += 1
+ utilities.assert_equals( expect=True, actual=installedCheck,
+ onpass="Intents are all INSTALLED",
+ onfail="Intents are not all in " +
+ "INSTALLED state" )
+
+ main.step( "Ping across added host intents" )
+ PingResult = main.TRUE
+ for i in range( 8, 18 ):
+ ping = main.Mininet1.pingHost( src="h" + str( i ),
+ target="h" + str( i + 10 ) )
+ PingResult = PingResult and ping
+ if ping == main.FALSE:
+ main.log.warn( "Ping failed between h" + str( i ) +
+ " and h" + str( i + 10 ) )
+ elif ping == main.TRUE:
+ main.log.info( "Ping test passed!" )
+ # Don't set PingResult or you'd override failures
+ if PingResult == main.FALSE:
+ main.log.error(
+ "Intents have not been installed correctly, pings failed." )
+ # TODO: pretty print
+ main.log.warn( "ONOS1 intents: " )
+ try:
+ tmpIntents = onosCli.intents()
+ main.log.warn( json.dumps( json.loads( tmpIntents ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.warn( repr( tmpIntents ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=PingResult,
+ onpass="Intents have been installed correctly and pings work",
+ onfail="Intents have not been installed correctly, pings failed." )
+
+ main.step( "Check leadership of topics" )
+ leaders = onosCli.leaders()
+ topicCheck = main.TRUE
+ try:
+ if leaders:
+ parsedLeaders = json.loads( leaders )
+ main.log.warn( json.dumps( parsedLeaders,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # check for all intent partitions
+ # check for election
+ # TODO: Look at Devices as topics now that it uses this system
+ topics = []
+ for i in range( 14 ):
+ topics.append( "intent-partition-" + str( i ) )
+ # FIXME: this should only be after we start the app
+ # FIXME: topics.append( "org.onosproject.election" )
+ # Print leaders output
+ main.log.debug( topics )
+ ONOStopics = [ j['topic'] for j in parsedLeaders ]
+ for topic in topics:
+ if topic not in ONOStopics:
+ main.log.error( "Error: " + topic +
+ " not in leaders" )
+ topicCheck = main.FALSE
+ else:
+ main.log.error( "leaders() returned None" )
+ topicCheck = main.FALSE
+ except ( ValueError, TypeError ):
+ topicCheck = main.FALSE
+ main.log.exception( "Error parsing leaders" )
+ main.log.error( repr( leaders ) )
+ # TODO: Check for a leader of these topics
+ # Check all nodes
+ if topicCheck:
+ for i in main.activeNodes:
+ node = main.CLIs[i]
+ response = node.leaders( jsonFormat=False)
+ main.log.warn( str( node.name ) + " leaders output: \n" +
+ str( response ) )
+
+ utilities.assert_equals( expect=main.TRUE, actual=topicCheck,
+ onpass="intent Partitions is in leaders",
+ onfail="Some topics were lost " )
+ # Print partitions
+ partitions = onosCli.partitions()
+ try:
+ if partitions :
+ parsedPartitions = json.loads( partitions )
+ main.log.warn( json.dumps( parsedPartitions,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check for a leader in all paritions
+ # TODO check for consistency among nodes
+ else:
+ main.log.error( "partitions() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing partitions" )
+ main.log.error( repr( partitions ) )
+ # Print Pending Map
+ pendingMap = onosCli.pendingMap()
+ try:
+ if pendingMap :
+ parsedPending = json.loads( pendingMap )
+ main.log.warn( json.dumps( parsedPending,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check something here?
+ else:
+ main.log.error( "pendingMap() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing pending map" )
+ main.log.error( repr( pendingMap ) )
+
+ if not installedCheck:
+ main.log.info( "Waiting 60 seconds to see if the state of " +
+ "intents change" )
+ time.sleep( 60 )
+ # Print the intent states
+ intents = onosCli.intents()
+ intentStates = []
+ main.log.info( "%-6s%-15s%-15s" % ( 'Count', 'ID', 'State' ) )
+ count = 0
+ # Iter through intents of a node
+ try:
+ for intent in json.loads( intents ):
+ state = intent.get( 'state', None )
+ if "INSTALLED" not in state:
+ installedCheck = False
+ intentId = intent.get( 'id', None )
+ intentStates.append( ( intentId, state ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing intents." )
+ intentStates.sort()
+ for i, s in intentStates:
+ count += 1
+ main.log.info( "%-6s%-15s%-15s" %
+ ( str( count ), str( i ), str( s ) ) )
+ leaders = onosCli.leaders()
+ try:
+ missing = False
+ if leaders:
+ parsedLeaders = json.loads( leaders )
+ main.log.warn( json.dumps( parsedLeaders,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # check for all intent partitions
+ # check for election
+ topics = []
+ for i in range( 14 ):
+ topics.append( "intent-partition-" + str( i ) )
+ # FIXME: this should only be after we start the app
+ topics.append( "org.onosproject.election" )
+ main.log.debug( topics )
+ ONOStopics = [ j['topic'] for j in parsedLeaders ]
+ for topic in topics:
+ if topic not in ONOStopics:
+ main.log.error( "Error: " + topic +
+ " not in leaders" )
+ missing = True
+ else:
+ main.log.error( "leaders() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing leaders" )
+ main.log.error( repr( leaders ) )
+ if missing:
+ for i in main.activeNodes:
+ node = main.CLIs[i]
+ response = node.leaders( jsonFormat=False)
+ main.log.warn( str( node.name ) + " leaders output: \n" +
+ str( response ) )
+
+ partitions = onosCli.partitions()
+ try:
+ if partitions :
+ parsedPartitions = json.loads( partitions )
+ main.log.warn( json.dumps( parsedPartitions,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check for a leader in all paritions
+ # TODO check for consistency among nodes
+ else:
+ main.log.error( "partitions() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing partitions" )
+ main.log.error( repr( partitions ) )
+ pendingMap = onosCli.pendingMap()
+ try:
+ if pendingMap :
+ parsedPending = json.loads( pendingMap )
+ main.log.warn( json.dumps( parsedPending,
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ # TODO check something here?
+ else:
+ main.log.error( "pendingMap() returned None" )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing pending map" )
+ main.log.error( repr( pendingMap ) )
+ # Print flowrules
+ node = main.activeNodes[0]
+ main.log.debug( main.CLIs[node].flows( jsonFormat=False ) )
+ main.step( "Wait a minute then ping again" )
+ # the wait is above
+ PingResult = main.TRUE
+ for i in range( 8, 18 ):
+ ping = main.Mininet1.pingHost( src="h" + str( i ),
+ target="h" + str( i + 10 ) )
+ PingResult = PingResult and ping
+ if ping == main.FALSE:
+ main.log.warn( "Ping failed between h" + str( i ) +
+ " and h" + str( i + 10 ) )
+ elif ping == main.TRUE:
+ main.log.info( "Ping test passed!" )
+ # Don't set PingResult or you'd override failures
+ if PingResult == main.FALSE:
+ main.log.error(
+ "Intents have not been installed correctly, pings failed." )
+ # TODO: pretty print
+ main.log.warn( "ONOS1 intents: " )
+ try:
+ tmpIntents = onosCli.intents()
+ main.log.warn( json.dumps( json.loads( tmpIntents ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.warn( repr( tmpIntents ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=PingResult,
+ onpass="Intents have been installed correctly and pings work",
+ onfail="Intents have not been installed correctly, pings failed." )
+
+ def CASE5( self, main ):
+ """
+ Reading state of ONOS
+ """
+ import json
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+
+ main.case( "Setting up and gathering data for current state" )
+ # The general idea for this test case is to pull the state of
+ # ( intents,flows, topology,... ) from each ONOS node
+ # We can then compare them with each other and also with past states
+
+ main.step( "Check that each switch has a master" )
+ global mastershipState
+ mastershipState = '[]'
+
+ # Assert that each device has a master
+ rolesNotNull = main.TRUE
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].rolesNotNull,
+ name="rolesNotNull-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ rolesNotNull = rolesNotNull and t.result
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=rolesNotNull,
+ onpass="Each device has a master",
+ onfail="Some devices don't have a master assigned" )
+
+ main.step( "Get the Mastership of each switch from each controller" )
+ ONOSMastership = []
+ mastershipCheck = main.FALSE
+ consistentMastership = True
+ rolesResults = True
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].roles,
+ name="roles-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ONOSMastership.append( t.result )
+
+ for i in range( len( ONOSMastership ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if not ONOSMastership[i] or "Error" in ONOSMastership[i]:
+ main.log.error( "Error in getting ONOS" + node + " roles" )
+ main.log.warn( "ONOS" + node + " mastership response: " +
+ repr( ONOSMastership[i] ) )
+ rolesResults = False
+ utilities.assert_equals(
+ expect=True,
+ actual=rolesResults,
+ onpass="No error in reading roles output",
+ onfail="Error in reading roles from ONOS" )
+
+ main.step( "Check for consistency in roles from each controller" )
+ if all([ i == ONOSMastership[ 0 ] for i in ONOSMastership ] ):
+ main.log.info(
+ "Switch roles are consistent across all ONOS nodes" )
+ else:
+ consistentMastership = False
+ utilities.assert_equals(
+ expect=True,
+ actual=consistentMastership,
+ onpass="Switch roles are consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of switch roles" )
+
+ if rolesResults and not consistentMastership:
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ try:
+ main.log.warn(
+ "ONOS" + node + " roles: ",
+ json.dumps(
+ json.loads( ONOSMastership[ i ] ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.warn( repr( ONOSMastership[ i ] ) )
+ elif rolesResults and consistentMastership:
+ mastershipCheck = main.TRUE
+ mastershipState = ONOSMastership[ 0 ]
+
+ main.step( "Get the intents from each controller" )
+ global intentState
+ intentState = []
+ ONOSIntents = []
+ intentCheck = main.FALSE
+ consistentIntents = True
+ intentsResults = True
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].intents,
+ name="intents-" + str( i ),
+ args=[],
+ kwargs={ 'jsonFormat': True } )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ONOSIntents.append( t.result )
+
+ for i in range( len( ONOSIntents ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if not ONOSIntents[ i ] or "Error" in ONOSIntents[ i ]:
+ main.log.error( "Error in getting ONOS" + node + " intents" )
+ main.log.warn( "ONOS" + node + " intents response: " +
+ repr( ONOSIntents[ i ] ) )
+ intentsResults = False
+ utilities.assert_equals(
+ expect=True,
+ actual=intentsResults,
+ onpass="No error in reading intents output",
+ onfail="Error in reading intents from ONOS" )
+
+ main.step( "Check for consistency in Intents from each controller" )
+ if all([ sorted( i ) == sorted( ONOSIntents[ 0 ] ) for i in ONOSIntents ] ):
+ main.log.info( "Intents are consistent across all ONOS " +
+ "nodes" )
+ else:
+ consistentIntents = False
+ main.log.error( "Intents not consistent" )
+ utilities.assert_equals(
+ expect=True,
+ actual=consistentIntents,
+ onpass="Intents are consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of intents" )
+
+ if intentsResults:
+ # Try to make it easy to figure out what is happening
+ #
+ # Intent ONOS1 ONOS2 ...
+ # 0x01 INSTALLED INSTALLING
+ # ... ... ...
+ # ... ... ...
+ title = " Id"
+ for n in main.activeNodes:
+ title += " " * 10 + "ONOS" + str( n + 1 )
+ main.log.warn( title )
+ # get all intent keys in the cluster
+ keys = []
+ try:
+ # Get the set of all intent keys
+ for nodeStr in ONOSIntents:
+ node = json.loads( nodeStr )
+ for intent in node:
+ keys.append( intent.get( 'id' ) )
+ keys = set( keys )
+ # For each intent key, print the state on each node
+ for key in keys:
+ row = "%-13s" % key
+ for nodeStr in ONOSIntents:
+ node = json.loads( nodeStr )
+ for intent in node:
+ if intent.get( 'id', "Error" ) == key:
+ row += "%-15s" % intent.get( 'state' )
+ main.log.warn( row )
+ # End of intent state table
+ except ValueError as e:
+ main.log.exception( e )
+ main.log.debug( "nodeStr was: " + repr( nodeStr ) )
+
+ if intentsResults and not consistentIntents:
+ # print the json objects
+ n = str( main.activeNodes[-1] + 1 )
+ main.log.debug( "ONOS" + n + " intents: " )
+ main.log.debug( json.dumps( json.loads( ONOSIntents[ -1 ] ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ for i in range( len( ONOSIntents ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if ONOSIntents[ i ] != ONOSIntents[ -1 ]:
+ main.log.debug( "ONOS" + node + " intents: " )
+ main.log.debug( json.dumps( json.loads( ONOSIntents[i] ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ else:
+ main.log.debug( "ONOS" + node + " intents match ONOS" +
+ n + " intents" )
+ elif intentsResults and consistentIntents:
+ intentCheck = main.TRUE
+ intentState = ONOSIntents[ 0 ]
+
+ main.step( "Get the flows from each controller" )
+ global flowState
+ flowState = []
+ ONOSFlows = []
+ ONOSFlowsJson = []
+ flowCheck = main.FALSE
+ consistentFlows = True
+ flowsResults = True
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].flows,
+ name="flows-" + str( i ),
+ args=[],
+ kwargs={ 'jsonFormat': True } )
+ threads.append( t )
+ t.start()
+
+ # NOTE: Flows command can take some time to run
+ time.sleep(30)
+ for t in threads:
+ t.join()
+ result = t.result
+ ONOSFlows.append( result )
+
+ for i in range( len( ONOSFlows ) ):
+ num = str( main.activeNodes[i] + 1 )
+ if not ONOSFlows[ i ] or "Error" in ONOSFlows[ i ]:
+ main.log.error( "Error in getting ONOS" + num + " flows" )
+ main.log.warn( "ONOS" + num + " flows response: " +
+ repr( ONOSFlows[ i ] ) )
+ flowsResults = False
+ ONOSFlowsJson.append( None )
+ else:
+ try:
+ ONOSFlowsJson.append( json.loads( ONOSFlows[ i ] ) )
+ except ( ValueError, TypeError ):
+ # FIXME: change this to log.error?
+ main.log.exception( "Error in parsing ONOS" + num +
+ " response as json." )
+ main.log.error( repr( ONOSFlows[ i ] ) )
+ ONOSFlowsJson.append( None )
+ flowsResults = False
+ utilities.assert_equals(
+ expect=True,
+ actual=flowsResults,
+ onpass="No error in reading flows output",
+ onfail="Error in reading flows from ONOS" )
+
+ main.step( "Check for consistency in Flows from each controller" )
+ tmp = [ len( i ) == len( ONOSFlowsJson[ 0 ] ) for i in ONOSFlowsJson ]
+ if all( tmp ):
+ main.log.info( "Flow count is consistent across all ONOS nodes" )
+ else:
+ consistentFlows = False
+ utilities.assert_equals(
+ expect=True,
+ actual=consistentFlows,
+ onpass="The flow count is consistent across all ONOS nodes",
+ onfail="ONOS nodes have different flow counts" )
+
+ if flowsResults and not consistentFlows:
+ for i in range( len( ONOSFlows ) ):
+ node = str( main.activeNodes[i] + 1 )
+ try:
+ main.log.warn(
+ "ONOS" + node + " flows: " +
+ json.dumps( json.loads( ONOSFlows[i] ), sort_keys=True,
+ indent=4, separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.warn( "ONOS" + node + " flows: " +
+ repr( ONOSFlows[ i ] ) )
+ elif flowsResults and consistentFlows:
+ flowCheck = main.TRUE
+ flowState = ONOSFlows[ 0 ]
+
+ main.step( "Get the OF Table entries" )
+ global flows
+ flows = []
+ for i in range( 1, 29 ):
+ flows.append( main.Mininet1.getFlowTable( "s" + str( i ), version="1.3", debug=False ) )
+ if flowCheck == main.FALSE:
+ for table in flows:
+ main.log.warn( table )
+ # TODO: Compare switch flow tables with ONOS flow tables
+
+ main.step( "Start continuous pings" )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source1' ],
+ target=main.params[ 'PING' ][ 'target1' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source2' ],
+ target=main.params[ 'PING' ][ 'target2' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source3' ],
+ target=main.params[ 'PING' ][ 'target3' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source4' ],
+ target=main.params[ 'PING' ][ 'target4' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source5' ],
+ target=main.params[ 'PING' ][ 'target5' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source6' ],
+ target=main.params[ 'PING' ][ 'target6' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source7' ],
+ target=main.params[ 'PING' ][ 'target7' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source8' ],
+ target=main.params[ 'PING' ][ 'target8' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source9' ],
+ target=main.params[ 'PING' ][ 'target9' ],
+ pingTime=500 )
+ main.Mininet2.pingLong(
+ src=main.params[ 'PING' ][ 'source10' ],
+ target=main.params[ 'PING' ][ 'target10' ],
+ pingTime=500 )
+
+ main.step( "Collecting topology information from ONOS" )
+ devices = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].devices,
+ name="devices-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ devices.append( t.result )
+ hosts = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].hosts,
+ name="hosts-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ try:
+ hosts.append( json.loads( t.result ) )
+ except ( ValueError, TypeError ):
+ # FIXME: better handling of this, print which node
+ # Maybe use thread name?
+ main.log.exception( "Error parsing json output of hosts" )
+ main.log.warn( repr( t.result ) )
+ hosts.append( None )
+
+ ports = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].ports,
+ name="ports-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ports.append( t.result )
+ links = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].links,
+ name="links-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ links.append( t.result )
+ clusters = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].clusters,
+ name="clusters-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ clusters.append( t.result )
+ # Compare json objects for hosts and dataplane clusters
+
+ # hosts
+ main.step( "Host view is consistent across ONOS nodes" )
+ consistentHostsResult = main.TRUE
+ for controller in range( len( hosts ) ):
+ controllerStr = str( main.activeNodes[controller] + 1 )
+ if hosts[ controller ] and "Error" not in hosts[ controller ]:
+ if hosts[ controller ] == hosts[ 0 ]:
+ continue
+ else: # hosts not consistent
+ main.log.error( "hosts from ONOS" +
+ controllerStr +
+ " is inconsistent with ONOS1" )
+ main.log.warn( repr( hosts[ controller ] ) )
+ consistentHostsResult = main.FALSE
+
+ else:
+ main.log.error( "Error in getting ONOS hosts from ONOS" +
+ controllerStr )
+ consistentHostsResult = main.FALSE
+ main.log.warn( "ONOS" + controllerStr +
+ " hosts response: " +
+ repr( hosts[ controller ] ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=consistentHostsResult,
+ onpass="Hosts view is consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of hosts" )
+
+ main.step( "Each host has an IP address" )
+ ipResult = main.TRUE
+ for controller in range( 0, len( hosts ) ):
+ controllerStr = str( main.activeNodes[controller] + 1 )
+ if hosts[ controller ]:
+ for host in hosts[ controller ]:
+ if not host.get( 'ipAddresses', [ ] ):
+ main.log.error( "Error with host ips on controller" +
+ controllerStr + ": " + str( host ) )
+ ipResult = main.FALSE
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=ipResult,
+ onpass="The ips of the hosts aren't empty",
+ onfail="The ip of at least one host is missing" )
+
+ # Strongly connected clusters of devices
+ main.step( "Cluster view is consistent across ONOS nodes" )
+ consistentClustersResult = main.TRUE
+ for controller in range( len( clusters ) ):
+ controllerStr = str( main.activeNodes[controller] + 1 )
+ if "Error" not in clusters[ controller ]:
+ if clusters[ controller ] == clusters[ 0 ]:
+ continue
+ else: # clusters not consistent
+ main.log.error( "clusters from ONOS" + controllerStr +
+ " is inconsistent with ONOS1" )
+ consistentClustersResult = main.FALSE
+
+ else:
+ main.log.error( "Error in getting dataplane clusters " +
+ "from ONOS" + controllerStr )
+ consistentClustersResult = main.FALSE
+ main.log.warn( "ONOS" + controllerStr +
+ " clusters response: " +
+ repr( clusters[ controller ] ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=consistentClustersResult,
+ onpass="Clusters view is consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of clusters" )
+ if consistentClustersResult != main.TRUE:
+ main.log.debug( clusters )
+ # there should always only be one cluster
+ main.step( "Cluster view correct across ONOS nodes" )
+ try:
+ numClusters = len( json.loads( clusters[ 0 ] ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing clusters[0]: " +
+ repr( clusters[ 0 ] ) )
+ numClusters = "ERROR"
+ clusterResults = main.FALSE
+ if numClusters == 1:
+ clusterResults = main.TRUE
+ utilities.assert_equals(
+ expect=1,
+ actual=numClusters,
+ onpass="ONOS shows 1 SCC",
+ onfail="ONOS shows " + str( numClusters ) + " SCCs" )
+
+ main.step( "Comparing ONOS topology to MN" )
+ devicesResults = main.TRUE
+ linksResults = main.TRUE
+ hostsResults = main.TRUE
+ mnSwitches = main.Mininet1.getSwitches()
+ mnLinks = main.Mininet1.getLinks()
+ mnHosts = main.Mininet1.getHosts()
+ for controller in main.activeNodes:
+ controllerStr = str( main.activeNodes[controller] + 1 )
+ if devices[ controller ] and ports[ controller ] and\
+ "Error" not in devices[ controller ] and\
+ "Error" not in ports[ controller ]:
+ currentDevicesResult = main.Mininet1.compareSwitches(
+ mnSwitches,
+ json.loads( devices[ controller ] ),
+ json.loads( ports[ controller ] ) )
+ else:
+ currentDevicesResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentDevicesResult,
+ onpass="ONOS" + controllerStr +
+ " Switches view is correct",
+ onfail="ONOS" + controllerStr +
+ " Switches view is incorrect" )
+ if links[ controller ] and "Error" not in links[ controller ]:
+ currentLinksResult = main.Mininet1.compareLinks(
+ mnSwitches, mnLinks,
+ json.loads( links[ controller ] ) )
+ else:
+ currentLinksResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentLinksResult,
+ onpass="ONOS" + controllerStr +
+ " links view is correct",
+ onfail="ONOS" + controllerStr +
+ " links view is incorrect" )
+
+ if hosts[ controller ] and "Error" not in hosts[ controller ]:
+ currentHostsResult = main.Mininet1.compareHosts(
+ mnHosts,
+ hosts[ controller ] )
+ else:
+ currentHostsResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentHostsResult,
+ onpass="ONOS" + controllerStr +
+ " hosts exist in Mininet",
+ onfail="ONOS" + controllerStr +
+ " hosts don't match Mininet" )
+
+ devicesResults = devicesResults and currentDevicesResult
+ linksResults = linksResults and currentLinksResult
+ hostsResults = hostsResults and currentHostsResult
+
+ main.step( "Device information is correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=devicesResults,
+ onpass="Device information is correct",
+ onfail="Device information is incorrect" )
+
+ main.step( "Links are correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=linksResults,
+ onpass="Link are correct",
+ onfail="Links are incorrect" )
+
+ main.step( "Hosts are correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=hostsResults,
+ onpass="Hosts are correct",
+ onfail="Hosts are incorrect" )
+
+ def CASE61( self, main ):
+ """
+ The Failure case.
+ """
+ import math
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+ main.case( "Partition ONOS nodes into two distinct partitions" )
+
+ main.step( "Checking ONOS Logs for errors" )
+ for node in main.nodes:
+ main.log.debug( "Checking logs for errors on " + node.name + ":" )
+ main.log.warn( main.ONOSbench.checkLogs( node.ip_address ) )
+
+ n = len( main.nodes ) # Number of nodes
+ p = ( ( n + 1 ) / 2 ) + 1 # Number of partitions
+ main.partition = [ 0 ] # ONOS node to partition, listed by index in main.nodes
+ if n > 3:
+ main.partition.append( p - 1 )
+ # NOTE: This only works for cluster sizes of 3,5, or 7.
+
+ main.step( "Partitioning ONOS nodes" )
+ nodeList = [ str( i + 1 ) for i in main.partition ]
+ main.log.info( "Nodes to be partitioned: " + str( nodeList ) )
+ partitionResults = main.TRUE
+ for i in range( 0, n ):
+ this = main.nodes[i]
+ if i not in main.partition:
+ for j in main.partition:
+ foe = main.nodes[j]
+ main.log.warn( "Setting IP Tables rule from {} to {}. ".format( this.ip_address, foe.ip_address ) )
+ #CMD HERE
+ cmdStr = "sudo iptables -A {} -d {} -s {} -j DROP".format( "INPUT", this.ip_address, foe.ip_address )
+ this.handle.sendline( cmdStr )
+ this.handle.expect( "\$" )
+ main.log.debug( this.handle.before )
+ else:
+ for j in range( 0, n ):
+ if j not in main.partition:
+ foe = main.nodes[j]
+ main.log.warn( "Setting IP Tables rule from {} to {}. ".format( this.ip_address, foe.ip_address ) )
+ #CMD HERE
+ cmdStr = "sudo iptables -A {} -d {} -s {} -j DROP".format( "INPUT", this.ip_address, foe.ip_address )
+ this.handle.sendline( cmdStr )
+ this.handle.expect( "\$" )
+ main.log.debug( this.handle.before )
+ main.activeNodes.remove( i )
+ # NOTE: When dynamic clustering is finished, we need to start checking
+ # main.partion nodes still work when partitioned
+ utilities.assert_equals( expect=main.TRUE, actual=partitionResults,
+ onpass="Firewall rules set successfully",
+ onfail="Error setting firewall rules" )
+
+ main.log.step( "Sleeping 60 seconds" )
+ time.sleep( 60 )
+
+ def CASE62( self, main ):
+ """
+ Healing Partition
+ """
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+ assert main.partition, "main.partition not defined"
+ main.case( "Healing Partition" )
+
+ main.step( "Deleteing firewall rules" )
+ healResults = main.TRUE
+ for node in main.nodes:
+ cmdStr = "sudo iptables -F"
+ node.handle.sendline( cmdStr )
+ node.handle.expect( "\$" )
+ main.log.debug( node.handle.before )
+ utilities.assert_equals( expect=main.TRUE, actual=healResults,
+ onpass="Firewall rules removed",
+ onfail="Error removing firewall rules" )
+
+ for node in main.partition:
+ main.activeNodes.append( node )
+ main.activeNodes.sort()
+ try:
+ assert list( set( main.activeNodes ) ) == main.activeNodes,\
+ "List of active nodes has duplicates, this likely indicates something was run out of order"
+ except AssertionError:
+ main.log.exception( "" )
+ main.cleanup()
+ main.exit()
+
+ def CASE7( self, main ):
+ """
+ Check state after ONOS failure
+ """
+ import json
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+ try:
+ main.partition
+ except AttributeError:
+ main.partition = []
+
+ main.case( "Running ONOS Constant State Tests" )
+
+ main.step( "Check that each switch has a master" )
+ # Assert that each device has a master
+ rolesNotNull = main.TRUE
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].rolesNotNull,
+ name="rolesNotNull-" + str( i ),
+ args=[ ] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ rolesNotNull = rolesNotNull and t.result
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=rolesNotNull,
+ onpass="Each device has a master",
+ onfail="Some devices don't have a master assigned" )
+
+ main.step( "Read device roles from ONOS" )
+ ONOSMastership = []
+ mastershipCheck = main.FALSE
+ consistentMastership = True
+ rolesResults = True
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].roles,
+ name="roles-" + str( i ),
+ args=[] )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ONOSMastership.append( t.result )
+
+ for i in range( len( ONOSMastership ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if not ONOSMastership[i] or "Error" in ONOSMastership[i]:
+ main.log.error( "Error in getting ONOS" + node + " roles" )
+ main.log.warn( "ONOS" + node + " mastership response: " +
+ repr( ONOSMastership[i] ) )
+ rolesResults = False
+ utilities.assert_equals(
+ expect=True,
+ actual=rolesResults,
+ onpass="No error in reading roles output",
+ onfail="Error in reading roles from ONOS" )
+
+ main.step( "Check for consistency in roles from each controller" )
+ if all([ i == ONOSMastership[ 0 ] for i in ONOSMastership ] ):
+ main.log.info(
+ "Switch roles are consistent across all ONOS nodes" )
+ else:
+ consistentMastership = False
+ utilities.assert_equals(
+ expect=True,
+ actual=consistentMastership,
+ onpass="Switch roles are consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of switch roles" )
+
+ if rolesResults and not consistentMastership:
+ for i in range( len( ONOSMastership ) ):
+ node = str( main.activeNodes[i] + 1 )
+ main.log.warn( "ONOS" + node + " roles: ",
+ json.dumps( json.loads( ONOSMastership[ i ] ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+
+ # NOTE: we expect mastership to change on controller failure
+
+ main.step( "Get the intents and compare across all nodes" )
+ ONOSIntents = []
+ intentCheck = main.FALSE
+ consistentIntents = True
+ intentsResults = True
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].intents,
+ name="intents-" + str( i ),
+ args=[],
+ kwargs={ 'jsonFormat': True } )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ONOSIntents.append( t.result )
+
+ for i in range( len( ONOSIntents) ):
+ node = str( main.activeNodes[i] + 1 )
+ if not ONOSIntents[ i ] or "Error" in ONOSIntents[ i ]:
+ main.log.error( "Error in getting ONOS" + node + " intents" )
+ main.log.warn( "ONOS" + node + " intents response: " +
+ repr( ONOSIntents[ i ] ) )
+ intentsResults = False
+ utilities.assert_equals(
+ expect=True,
+ actual=intentsResults,
+ onpass="No error in reading intents output",
+ onfail="Error in reading intents from ONOS" )
+
+ main.step( "Check for consistency in Intents from each controller" )
+ if all([ sorted( i ) == sorted( ONOSIntents[ 0 ] ) for i in ONOSIntents ] ):
+ main.log.info( "Intents are consistent across all ONOS " +
+ "nodes" )
+ else:
+ consistentIntents = False
+
+ # Try to make it easy to figure out what is happening
+ #
+ # Intent ONOS1 ONOS2 ...
+ # 0x01 INSTALLED INSTALLING
+ # ... ... ...
+ # ... ... ...
+ title = " ID"
+ for n in main.activeNodes:
+ title += " " * 10 + "ONOS" + str( n + 1 )
+ main.log.warn( title )
+ # get all intent keys in the cluster
+ keys = []
+ for nodeStr in ONOSIntents:
+ node = json.loads( nodeStr )
+ for intent in node:
+ keys.append( intent.get( 'id' ) )
+ keys = set( keys )
+ for key in keys:
+ row = "%-13s" % key
+ for nodeStr in ONOSIntents:
+ node = json.loads( nodeStr )
+ for intent in node:
+ if intent.get( 'id' ) == key:
+ row += "%-15s" % intent.get( 'state' )
+ main.log.warn( row )
+ # End table view
+
+ utilities.assert_equals(
+ expect=True,
+ actual=consistentIntents,
+ onpass="Intents are consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of intents" )
+ intentStates = []
+ for node in ONOSIntents: # Iter through ONOS nodes
+ nodeStates = []
+ # Iter through intents of a node
+ try:
+ for intent in json.loads( node ):
+ nodeStates.append( intent[ 'state' ] )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error in parsing intents" )
+ main.log.error( repr( node ) )
+ intentStates.append( nodeStates )
+ out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ]
+ main.log.info( dict( out ) )
+
+ if intentsResults and not consistentIntents:
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ main.log.warn( "ONOS" + node + " intents: " )
+ main.log.warn( json.dumps(
+ json.loads( ONOSIntents[ i ] ),
+ sort_keys=True,
+ indent=4,
+ separators=( ',', ': ' ) ) )
+ elif intentsResults and consistentIntents:
+ intentCheck = main.TRUE
+
+ # NOTE: Store has no durability, so intents are lost across system
+ # restarts
+ main.step( "Compare current intents with intents before the failure" )
+ # NOTE: this requires case 5 to pass for intentState to be set.
+ # maybe we should stop the test if that fails?
+ sameIntents = main.FALSE
+ try:
+ intentState
+ except NameError:
+ main.log.warn( "No previous intent state was saved" )
+ else:
+ if intentState and intentState == ONOSIntents[ 0 ]:
+ sameIntents = main.TRUE
+ main.log.info( "Intents are consistent with before failure" )
+ # TODO: possibly the states have changed? we may need to figure out
+ # what the acceptable states are
+ elif len( intentState ) == len( ONOSIntents[ 0 ] ):
+ sameIntents = main.TRUE
+ try:
+ before = json.loads( intentState )
+ after = json.loads( ONOSIntents[ 0 ] )
+ for intent in before:
+ if intent not in after:
+ sameIntents = main.FALSE
+ main.log.debug( "Intent is not currently in ONOS " +
+ "(at least in the same form):" )
+ main.log.debug( json.dumps( intent ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Exception printing intents" )
+ main.log.debug( repr( ONOSIntents[0] ) )
+ main.log.debug( repr( intentState ) )
+ if sameIntents == main.FALSE:
+ try:
+ main.log.debug( "ONOS intents before: " )
+ main.log.debug( json.dumps( json.loads( intentState ),
+ sort_keys=True, indent=4,
+ separators=( ',', ': ' ) ) )
+ main.log.debug( "Current ONOS intents: " )
+ main.log.debug( json.dumps( json.loads( ONOSIntents[ 0 ] ),
+ sort_keys=True, indent=4,
+ separators=( ',', ': ' ) ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Exception printing intents" )
+ main.log.debug( repr( ONOSIntents[0] ) )
+ main.log.debug( repr( intentState ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=sameIntents,
+ onpass="Intents are consistent with before failure",
+ onfail="The Intents changed during failure" )
+ intentCheck = intentCheck and sameIntents
+
+ main.step( "Get the OF Table entries and compare to before " +
+ "component failure" )
+ FlowTables = main.TRUE
+ for i in range( 28 ):
+ main.log.info( "Checking flow table on s" + str( i + 1 ) )
+ tmpFlows = main.Mininet1.getFlowTable( "s" + str( i + 1 ), version="1.3", debug=False )
+ curSwitch = main.Mininet1.flowTableComp( flows[i], tmpFlows )
+ FlowTables = FlowTables and curSwitch
+ if curSwitch == main.FALSE:
+ main.log.warn( "Differences in flow table for switch: s{}".format( i + 1 ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=FlowTables,
+ onpass="No changes were found in the flow tables",
+ onfail="Changes were found in the flow tables" )
+
+ main.Mininet2.pingLongKill()
+ '''
+ main.step( "Check the continuous pings to ensure that no packets " +
+ "were dropped during component failure" )
+ main.Mininet2.pingKill( main.params[ 'TESTONUSER' ],
+ main.params[ 'TESTONIP' ] )
+ LossInPings = main.FALSE
+ # NOTE: checkForLoss returns main.FALSE with 0% packet loss
+ for i in range( 8, 18 ):
+ main.log.info(
+ "Checking for a loss in pings along flow from s" +
+ str( i ) )
+ LossInPings = main.Mininet2.checkForLoss(
+ "/tmp/ping.h" +
+ str( i ) ) or LossInPings
+ if LossInPings == main.TRUE:
+ main.log.info( "Loss in ping detected" )
+ elif LossInPings == main.ERROR:
+ main.log.info( "There are multiple mininet process running" )
+ elif LossInPings == main.FALSE:
+ main.log.info( "No Loss in the pings" )
+ main.log.info( "No loss of dataplane connectivity" )
+ utilities.assert_equals(
+ expect=main.FALSE,
+ actual=LossInPings,
+ onpass="No Loss of connectivity",
+ onfail="Loss of dataplane connectivity detected" )
+ '''
+
+ main.step( "Leadership Election is still functional" )
+ # Test of LeadershipElection
+ leaderList = []
+
+ partitioned = []
+ for i in main.partition:
+ partitioned.append( main.nodes[i].ip_address )
+ leaderResult = main.TRUE
+
+ for i in main.activeNodes:
+ cli = main.CLIs[i]
+ leaderN = cli.electionTestLeader()
+ leaderList.append( leaderN )
+ if leaderN == main.FALSE:
+ # error in response
+ main.log.error( "Something is wrong with " +
+ "electionTestLeader function, check the" +
+ " error logs" )
+ leaderResult = main.FALSE
+ elif leaderN is None:
+ main.log.error( cli.name +
+ " shows no leader for the election-app was" +
+ " elected after the old one died" )
+ leaderResult = main.FALSE
+ elif leaderN in partitioned:
+ main.log.error( cli.name + " shows " + str( leaderN ) +
+ " as leader for the election-app, but it " +
+ "was partitioned" )
+ leaderResult = main.FALSE
+ if len( set( leaderList ) ) != 1:
+ leaderResult = main.FALSE
+ main.log.error(
+ "Inconsistent view of leader for the election test app" )
+ # TODO: print the list
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=leaderResult,
+ onpass="Leadership election passed",
+ onfail="Something went wrong with Leadership election" )
+
+ def CASE8( self, main ):
+ """
+ Compare topo
+ """
+ import json
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+
+ main.case( "Compare ONOS Topology view to Mininet topology" )
+ main.caseExplanation = "Compare topology objects between Mininet" +\
+ " and ONOS"
+ topoResult = main.FALSE
+ topoFailMsg = "ONOS topology don't match Mininet"
+ elapsed = 0
+ count = 0
+ main.step( "Comparing ONOS topology to MN topology" )
+ startTime = time.time()
+ # Give time for Gossip to work
+ while topoResult == main.FALSE and ( elapsed < 60 or count < 3 ):
+ devicesResults = main.TRUE
+ linksResults = main.TRUE
+ hostsResults = main.TRUE
+ hostAttachmentResults = True
+ count += 1
+ cliStart = time.time()
+ devices = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=utilities.retry,
+ name="devices-" + str( i ),
+ args=[ main.CLIs[i].devices, [ None ] ],
+ kwargs= { 'sleep': 5, 'attempts': 5,
+ 'randomTime': True } )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ devices.append( t.result )
+ hosts = []
+ ipResult = main.TRUE
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=utilities.retry,
+ name="hosts-" + str( i ),
+ args=[ main.CLIs[i].hosts, [ None ] ],
+ kwargs= { 'sleep': 5, 'attempts': 5,
+ 'randomTime': True } )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ try:
+ hosts.append( json.loads( t.result ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing hosts results" )
+ main.log.error( repr( t.result ) )
+ hosts.append( None )
+ for controller in range( 0, len( hosts ) ):
+ controllerStr = str( main.activeNodes[controller] + 1 )
+ if hosts[ controller ]:
+ for host in hosts[ controller ]:
+ if host is None or host.get( 'ipAddresses', [] ) == []:
+ main.log.error(
+ "Error with host ipAddresses on controller" +
+ controllerStr + ": " + str( host ) )
+ ipResult = main.FALSE
+ ports = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=utilities.retry,
+ name="ports-" + str( i ),
+ args=[ main.CLIs[i].ports, [ None ] ],
+ kwargs= { 'sleep': 5, 'attempts': 5,
+ 'randomTime': True } )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ ports.append( t.result )
+ links = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=utilities.retry,
+ name="links-" + str( i ),
+ args=[ main.CLIs[i].links, [ None ] ],
+ kwargs= { 'sleep': 5, 'attempts': 5,
+ 'randomTime': True } )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ links.append( t.result )
+ clusters = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=utilities.retry,
+ name="clusters-" + str( i ),
+ args=[ main.CLIs[i].clusters, [ None ] ],
+ kwargs= { 'sleep': 5, 'attempts': 5,
+ 'randomTime': True } )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ clusters.append( t.result )
+
+ elapsed = time.time() - startTime
+ cliTime = time.time() - cliStart
+ print "Elapsed time: " + str( elapsed )
+ print "CLI time: " + str( cliTime )
+
+ if all( e is None for e in devices ) and\
+ all( e is None for e in hosts ) and\
+ all( e is None for e in ports ) and\
+ all( e is None for e in links ) and\
+ all( e is None for e in clusters ):
+ topoFailMsg = "Could not get topology from ONOS"
+ main.log.error( topoFailMsg )
+ continue # Try again, No use trying to compare
+
+ mnSwitches = main.Mininet1.getSwitches()
+ mnLinks = main.Mininet1.getLinks()
+ mnHosts = main.Mininet1.getHosts()
+ for controller in range( len( main.activeNodes ) ):
+ controllerStr = str( main.activeNodes[controller] + 1 )
+ if devices[ controller ] and ports[ controller ] and\
+ "Error" not in devices[ controller ] and\
+ "Error" not in ports[ controller ]:
+
+ try:
+ currentDevicesResult = main.Mininet1.compareSwitches(
+ mnSwitches,
+ json.loads( devices[ controller ] ),
+ json.loads( ports[ controller ] ) )
+ except ( TypeError, ValueError ) as e:
+ main.log.exception( "Object not as expected; devices={!r}\nports={!r}".format(
+ devices[ controller ], ports[ controller ] ) )
+ else:
+ currentDevicesResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentDevicesResult,
+ onpass="ONOS" + controllerStr +
+ " Switches view is correct",
+ onfail="ONOS" + controllerStr +
+ " Switches view is incorrect" )
+
+ if links[ controller ] and "Error" not in links[ controller ]:
+ currentLinksResult = main.Mininet1.compareLinks(
+ mnSwitches, mnLinks,
+ json.loads( links[ controller ] ) )
+ else:
+ currentLinksResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentLinksResult,
+ onpass="ONOS" + controllerStr +
+ " links view is correct",
+ onfail="ONOS" + controllerStr +
+ " links view is incorrect" )
+ if hosts[ controller ] and "Error" not in hosts[ controller ]:
+ currentHostsResult = main.Mininet1.compareHosts(
+ mnHosts,
+ hosts[ controller ] )
+ elif hosts[ controller ] == []:
+ currentHostsResult = main.TRUE
+ else:
+ currentHostsResult = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=currentHostsResult,
+ onpass="ONOS" + controllerStr +
+ " hosts exist in Mininet",
+ onfail="ONOS" + controllerStr +
+ " hosts don't match Mininet" )
+ # CHECKING HOST ATTACHMENT POINTS
+ hostAttachment = True
+ zeroHosts = False
+ # FIXME: topo-HA/obelisk specific mappings:
+ # key is mac and value is dpid
+ mappings = {}
+ for i in range( 1, 29 ): # hosts 1 through 28
+ # set up correct variables:
+ macId = "00:" * 5 + hex( i ).split( "0x" )[1].upper().zfill(2)
+ if i == 1:
+ deviceId = "1000".zfill(16)
+ elif i == 2:
+ deviceId = "2000".zfill(16)
+ elif i == 3:
+ deviceId = "3000".zfill(16)
+ elif i == 4:
+ deviceId = "3004".zfill(16)
+ elif i == 5:
+ deviceId = "5000".zfill(16)
+ elif i == 6:
+ deviceId = "6000".zfill(16)
+ elif i == 7:
+ deviceId = "6007".zfill(16)
+ elif i >= 8 and i <= 17:
+ dpid = '3' + str( i ).zfill( 3 )
+ deviceId = dpid.zfill(16)
+ elif i >= 18 and i <= 27:
+ dpid = '6' + str( i ).zfill( 3 )
+ deviceId = dpid.zfill(16)
+ elif i == 28:
+ deviceId = "2800".zfill(16)
+ mappings[ macId ] = deviceId
+ if hosts[ controller ] is not None and "Error" not in hosts[ controller ]:
+ if hosts[ controller ] == []:
+ main.log.warn( "There are no hosts discovered" )
+ zeroHosts = True
+ else:
+ for host in hosts[ controller ]:
+ mac = None
+ location = None
+ device = None
+ port = None
+ try:
+ mac = host.get( 'mac' )
+ assert mac, "mac field could not be found for this host object"
+
+ location = host.get( 'location' )
+ assert location, "location field could not be found for this host object"
+
+ # Trim the protocol identifier off deviceId
+ device = str( location.get( 'elementId' ) ).split(':')[1]
+ assert device, "elementId field could not be found for this host location object"
+
+ port = location.get( 'port' )
+ assert port, "port field could not be found for this host location object"
+
+ # Now check if this matches where they should be
+ if mac and device and port:
+ if str( port ) != "1":
+ main.log.error( "The attachment port is incorrect for " +
+ "host " + str( mac ) +
+ ". Expected: 1 Actual: " + str( port) )
+ hostAttachment = False
+ if device != mappings[ str( mac ) ]:
+ main.log.error( "The attachment device is incorrect for " +
+ "host " + str( mac ) +
+ ". Expected: " + mappings[ str( mac ) ] +
+ " Actual: " + device )
+ hostAttachment = False
+ else:
+ hostAttachment = False
+ except AssertionError:
+ main.log.exception( "Json object not as expected" )
+ main.log.error( repr( host ) )
+ hostAttachment = False
+ else:
+ main.log.error( "No hosts json output or \"Error\"" +
+ " in output. hosts = " +
+ repr( hosts[ controller ] ) )
+ if zeroHosts is False:
+ hostAttachment = True
+
+ # END CHECKING HOST ATTACHMENT POINTS
+ devicesResults = devicesResults and currentDevicesResult
+ linksResults = linksResults and currentLinksResult
+ hostsResults = hostsResults and currentHostsResult
+ hostAttachmentResults = hostAttachmentResults and\
+ hostAttachment
+ topoResult = ( devicesResults and linksResults
+ and hostsResults and ipResult and
+ hostAttachmentResults )
+ utilities.assert_equals( expect=True,
+ actual=topoResult,
+ onpass="ONOS topology matches Mininet",
+ onfail=topoFailMsg )
+ # End of While loop to pull ONOS state
+
+ # Compare json objects for hosts and dataplane clusters
+
+ # hosts
+ main.step( "Hosts view is consistent across all ONOS nodes" )
+ consistentHostsResult = main.TRUE
+ for controller in range( len( hosts ) ):
+ controllerStr = str( main.activeNodes[controller] + 1 )
+ if hosts[ controller ] is not None and "Error" not in hosts[ controller ]:
+ if hosts[ controller ] == hosts[ 0 ]:
+ continue
+ else: # hosts not consistent
+ main.log.error( "hosts from ONOS" + controllerStr +
+ " is inconsistent with ONOS1" )
+ main.log.warn( repr( hosts[ controller ] ) )
+ consistentHostsResult = main.FALSE
+
+ else:
+ main.log.error( "Error in getting ONOS hosts from ONOS" +
+ controllerStr )
+ consistentHostsResult = main.FALSE
+ main.log.warn( "ONOS" + controllerStr +
+ " hosts response: " +
+ repr( hosts[ controller ] ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=consistentHostsResult,
+ onpass="Hosts view is consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of hosts" )
+
+ main.step( "Hosts information is correct" )
+ hostsResults = hostsResults and ipResult
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=hostsResults,
+ onpass="Host information is correct",
+ onfail="Host information is incorrect" )
+
+ main.step( "Host attachment points to the network" )
+ utilities.assert_equals(
+ expect=True,
+ actual=hostAttachmentResults,
+ onpass="Hosts are correctly attached to the network",
+ onfail="ONOS did not correctly attach hosts to the network" )
+
+ # Strongly connected clusters of devices
+ main.step( "Clusters view is consistent across all ONOS nodes" )
+ consistentClustersResult = main.TRUE
+ for controller in range( len( clusters ) ):
+ controllerStr = str( main.activeNodes[controller] + 1 )
+ if "Error" not in clusters[ controller ]:
+ if clusters[ controller ] == clusters[ 0 ]:
+ continue
+ else: # clusters not consistent
+ main.log.error( "clusters from ONOS" +
+ controllerStr +
+ " is inconsistent with ONOS1" )
+ consistentClustersResult = main.FALSE
+ else:
+ main.log.error( "Error in getting dataplane clusters " +
+ "from ONOS" + controllerStr )
+ consistentClustersResult = main.FALSE
+ main.log.warn( "ONOS" + controllerStr +
+ " clusters response: " +
+ repr( clusters[ controller ] ) )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=consistentClustersResult,
+ onpass="Clusters view is consistent across all ONOS nodes",
+ onfail="ONOS nodes have different views of clusters" )
+
+ main.step( "There is only one SCC" )
+ # there should always only be one cluster
+ try:
+ numClusters = len( json.loads( clusters[ 0 ] ) )
+ except ( ValueError, TypeError ):
+ main.log.exception( "Error parsing clusters[0]: " +
+ repr( clusters[0] ) )
+ numClusters = "ERROR"
+ clusterResults = main.FALSE
+ if numClusters == 1:
+ clusterResults = main.TRUE
+ utilities.assert_equals(
+ expect=1,
+ actual=numClusters,
+ onpass="ONOS shows 1 SCC",
+ onfail="ONOS shows " + str( numClusters ) + " SCCs" )
+
+ topoResult = ( devicesResults and linksResults
+ and hostsResults and consistentHostsResult
+ and consistentClustersResult and clusterResults
+ and ipResult and hostAttachmentResults )
+
+ topoResult = topoResult and int( count <= 2 )
+ note = "note it takes about " + str( int( cliTime ) ) + \
+ " seconds for the test to make all the cli calls to fetch " +\
+ "the topology from each ONOS instance"
+ main.log.info(
+ "Very crass estimate for topology discovery/convergence( " +
+ str( note ) + " ): " + str( elapsed ) + " seconds, " +
+ str( count ) + " tries" )
+
+ main.step( "Device information is correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=devicesResults,
+ onpass="Device information is correct",
+ onfail="Device information is incorrect" )
+
+ main.step( "Links are correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=linksResults,
+ onpass="Link are correct",
+ onfail="Links are incorrect" )
+
+ main.step( "Hosts are correct" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=hostsResults,
+ onpass="Hosts are correct",
+ onfail="Hosts are incorrect" )
+
+ # FIXME: move this to an ONOS state case
+ main.step( "Checking ONOS nodes" )
+ nodeResults = utilities.retry( main.HA.nodesCheck,
+ False,
+ args=[main.activeNodes],
+ attempts=5 )
+
+ utilities.assert_equals( expect=True, actual=nodeResults,
+ onpass="Nodes check successful",
+ onfail="Nodes check NOT successful" )
+ if not nodeResults:
+ for i in main.activeNodes:
+ main.log.debug( "{} components not ACTIVE: \n{}".format(
+ main.CLIs[i].name,
+ main.CLIs[i].sendline( "scr:list | grep -v ACTIVE" ) ) )
+
+ def CASE9( self, main ):
+ """
+ Link s3-s28 down
+ """
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+ # NOTE: You should probably run a topology check after this
+
+ linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] )
+
+ description = "Turn off a link to ensure that Link Discovery " +\
+ "is working properly"
+ main.case( description )
+
+ main.step( "Kill Link between s3 and s28" )
+ LinkDown = main.Mininet1.link( END1="s3", END2="s28", OPTION="down" )
+ main.log.info( "Waiting " + str( linkSleep ) +
+ " seconds for link down to be discovered" )
+ time.sleep( linkSleep )
+ utilities.assert_equals( expect=main.TRUE, actual=LinkDown,
+ onpass="Link down successful",
+ onfail="Failed to bring link down" )
+ # TODO do some sort of check here
+
+ def CASE10( self, main ):
+ """
+ Link s3-s28 up
+ """
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+ # NOTE: You should probably run a topology check after this
+
+ linkSleep = float( main.params[ 'timers' ][ 'LinkDiscovery' ] )
+
+ description = "Restore a link to ensure that Link Discovery is " + \
+ "working properly"
+ main.case( description )
+
+ main.step( "Bring link between s3 and s28 back up" )
+ LinkUp = main.Mininet1.link( END1="s3", END2="s28", OPTION="up" )
+ main.log.info( "Waiting " + str( linkSleep ) +
+ " seconds for link up to be discovered" )
+ time.sleep( linkSleep )
+ utilities.assert_equals( expect=main.TRUE, actual=LinkUp,
+ onpass="Link up successful",
+ onfail="Failed to bring link up" )
+ # TODO do some sort of check here
+
+ def CASE11( self, main ):
+ """
+ Switch Down
+ """
+ # NOTE: You should probably run a topology check after this
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+
+ switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] )
+
+ description = "Killing a switch to ensure it is discovered correctly"
+ onosCli = main.CLIs[ main.activeNodes[0] ]
+ main.case( description )
+ switch = main.params[ 'kill' ][ 'switch' ]
+ switchDPID = main.params[ 'kill' ][ 'dpid' ]
+
+ # TODO: Make this switch parameterizable
+ main.step( "Kill " + switch )
+ main.log.info( "Deleting " + switch )
+ main.Mininet1.delSwitch( switch )
+ main.log.info( "Waiting " + str( switchSleep ) +
+ " seconds for switch down to be discovered" )
+ time.sleep( switchSleep )
+ device = onosCli.getDevice( dpid=switchDPID )
+ # Peek at the deleted switch
+ main.log.warn( str( device ) )
+ result = main.FALSE
+ if device and device[ 'available' ] is False:
+ result = main.TRUE
+ utilities.assert_equals( expect=main.TRUE, actual=result,
+ onpass="Kill switch successful",
+ onfail="Failed to kill switch?" )
+
+ def CASE12( self, main ):
+ """
+ Switch Up
+ """
+ # NOTE: You should probably run a topology check after this
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+ assert ONOS1Port, "ONOS1Port not defined"
+ assert ONOS2Port, "ONOS2Port not defined"
+ assert ONOS3Port, "ONOS3Port not defined"
+ assert ONOS4Port, "ONOS4Port not defined"
+ assert ONOS5Port, "ONOS5Port not defined"
+ assert ONOS6Port, "ONOS6Port not defined"
+ assert ONOS7Port, "ONOS7Port not defined"
+
+ switchSleep = float( main.params[ 'timers' ][ 'SwitchDiscovery' ] )
+ switch = main.params[ 'kill' ][ 'switch' ]
+ switchDPID = main.params[ 'kill' ][ 'dpid' ]
+ links = main.params[ 'kill' ][ 'links' ].split()
+ onosCli = main.CLIs[ main.activeNodes[0] ]
+ description = "Adding a switch to ensure it is discovered correctly"
+ main.case( description )
+
+ main.step( "Add back " + switch )
+ main.Mininet1.addSwitch( switch, dpid=switchDPID )
+ for peer in links:
+ main.Mininet1.addLink( switch, peer )
+ ipList = [ node.ip_address for node in main.nodes ]
+ main.Mininet1.assignSwController( sw=switch, ip=ipList )
+ main.log.info( "Waiting " + str( switchSleep ) +
+ " seconds for switch up to be discovered" )
+ time.sleep( switchSleep )
+ device = onosCli.getDevice( dpid=switchDPID )
+ # Peek at the deleted switch
+ main.log.warn( str( device ) )
+ result = main.FALSE
+ if device and device[ 'available' ]:
+ result = main.TRUE
+ utilities.assert_equals( expect=main.TRUE, actual=result,
+ onpass="add switch successful",
+ onfail="Failed to add switch?" )
+
+ def CASE13( self, main ):
+ """
+ Clean up
+ """
+ import os
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+
+ # printing colors to terminal
+ colors = { 'cyan': '\033[96m', 'purple': '\033[95m',
+ 'blue': '\033[94m', 'green': '\033[92m',
+ 'yellow': '\033[93m', 'red': '\033[91m', 'end': '\033[0m' }
+ main.case( "Test Cleanup" )
+ main.step( "Killing tcpdumps" )
+ main.Mininet2.stopTcpdump()
+
+ testname = main.TEST
+ if main.params[ 'BACKUP' ][ 'ENABLED' ] == "True":
+ main.step( "Copying MN pcap and ONOS log files to test station" )
+ teststationUser = main.params[ 'BACKUP' ][ 'TESTONUSER' ]
+ teststationIP = main.params[ 'BACKUP' ][ 'TESTONIP' ]
+ # NOTE: MN Pcap file is being saved to logdir.
+ # We scp this file as MN and TestON aren't necessarily the same vm
+
+ # FIXME: To be replaced with a Jenkin's post script
+ # TODO: Load these from params
+ # NOTE: must end in /
+ logFolder = "/opt/onos/log/"
+ logFiles = [ "karaf.log", "karaf.log.1" ]
+ # NOTE: must end in /
+ for f in logFiles:
+ for node in main.nodes:
+ dstName = main.logdir + "/" + node.name + "-" + f
+ main.ONOSbench.secureCopy( node.user_name, node.ip_address,
+ logFolder + f, dstName )
+ # std*.log's
+ # NOTE: must end in /
+ logFolder = "/opt/onos/var/"
+ logFiles = [ "stderr.log", "stdout.log" ]
+ # NOTE: must end in /
+ for f in logFiles:
+ for node in main.nodes:
+ dstName = main.logdir + "/" + node.name + "-" + f
+ main.ONOSbench.secureCopy( node.user_name, node.ip_address,
+ logFolder + f, dstName )
+ else:
+ main.log.debug( "skipping saving log files" )
+
+ main.step( "Stopping Mininet" )
+ mnResult = main.Mininet1.stopNet()
+ utilities.assert_equals( expect=main.TRUE, actual=mnResult,
+ onpass="Mininet stopped",
+ onfail="MN cleanup NOT successful" )
+
+ main.step( "Checking ONOS Logs for errors" )
+ for node in main.nodes:
+ main.log.debug( "Checking logs for errors on " + node.name + ":" )
+ main.log.warn( main.ONOSbench.checkLogs( node.ip_address ) )
+
+ try:
+ timerLog = open( main.logdir + "/Timers.csv", 'w')
+ # Overwrite with empty line and close
+ labels = "Gossip Intents"
+ data = str( gossipTime )
+ timerLog.write( labels + "\n" + data )
+ timerLog.close()
+ except NameError, e:
+ main.log.exception(e)
+
+ def CASE14( self, main ):
+ """
+ start election app on all onos nodes
+ """
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+
+ main.case("Start Leadership Election app")
+ main.step( "Install leadership election app" )
+ onosCli = main.CLIs[ main.activeNodes[0] ]
+ appResult = onosCli.activateApp( "org.onosproject.election" )
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=appResult,
+ onpass="Election app installed",
+ onfail="Something went wrong with installing Leadership election" )
+
+ main.step( "Run for election on each node" )
+ for i in main.activeNodes:
+ main.CLIs[i].electionTestRun()
+ time.sleep(5)
+ activeCLIs = [ main.CLIs[i] for i in main.activeNodes ]
+ sameResult, leaders = main.HA.consistentLeaderboards( activeCLIs )
+ utilities.assert_equals(
+ expect=True,
+ actual=sameResult,
+ onpass="All nodes see the same leaderboards",
+ onfail="Inconsistent leaderboards" )
+
+ if sameResult:
+ leader = leaders[ 0 ][ 0 ]
+ if main.nodes[main.activeNodes[0]].ip_address in leader:
+ correctLeader = True
+ else:
+ correctLeader = False
+ main.step( "First node was elected leader" )
+ utilities.assert_equals(
+ expect=True,
+ actual=correctLeader,
+ onpass="Correct leader was elected",
+ onfail="Incorrect leader" )
+
+ def CASE15( self, main ):
+ """
+ Check that Leadership Election is still functional
+ 15.1 Run election on each node
+ 15.2 Check that each node has the same leaders and candidates
+ 15.3 Find current leader and withdraw
+ 15.4 Check that a new node was elected leader
+ 15.5 Check that that new leader was the candidate of old leader
+ 15.6 Run for election on old leader
+ 15.7 Check that oldLeader is a candidate, and leader if only 1 node
+ 15.8 Make sure that the old leader was added to the candidate list
+
+ old and new variable prefixes refer to data from before vs after
+ withdrawl and later before withdrawl vs after re-election
+ """
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+
+ description = "Check that Leadership Election is still functional"
+ main.case( description )
+ # NOTE: Need to re-run after restarts since being a canidate is not persistant
+
+ oldLeaders = [] # list of lists of each nodes' candidates before
+ newLeaders = [] # list of lists of each nodes' candidates after
+ oldLeader = '' # the old leader from oldLeaders, None if not same
+ newLeader = '' # the new leaders fron newLoeaders, None if not same
+ oldLeaderCLI = None # the CLI of the old leader used for re-electing
+ expectNoLeader = False # True when there is only one leader
+ if main.numCtrls == 1:
+ expectNoLeader = True
+
+ main.step( "Run for election on each node" )
+ electionResult = main.TRUE
+
+ for i in main.activeNodes: # run test election on each node
+ if main.CLIs[i].electionTestRun() == main.FALSE:
+ electionResult = main.FALSE
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=electionResult,
+ onpass="All nodes successfully ran for leadership",
+ onfail="At least one node failed to run for leadership" )
+
+ if electionResult == main.FALSE:
+ main.log.error(
+ "Skipping Test Case because Election Test App isn't loaded" )
+ main.skipCase()
+
+ main.step( "Check that each node shows the same leader and candidates" )
+ failMessage = "Nodes have different leaderboards"
+ activeCLIs = [ main.CLIs[i] for i in main.activeNodes ]
+ sameResult, oldLeaders = main.HA.consistentLeaderboards( activeCLIs )
+ if sameResult:
+ oldLeader = oldLeaders[ 0 ][ 0 ]
+ main.log.warn( oldLeader )
+ else:
+ oldLeader = None
+ utilities.assert_equals(
+ expect=True,
+ actual=sameResult,
+ onpass="Leaderboards are consistent for the election topic",
+ onfail=failMessage )
+
+ main.step( "Find current leader and withdraw" )
+ withdrawResult = main.TRUE
+ # do some sanity checking on leader before using it
+ if oldLeader is None:
+ main.log.error( "Leadership isn't consistent." )
+ withdrawResult = main.FALSE
+ # Get the CLI of the oldLeader
+ for i in main.activeNodes:
+ if oldLeader == main.nodes[ i ].ip_address:
+ oldLeaderCLI = main.CLIs[ i ]
+ break
+ else: # FOR/ELSE statement
+ main.log.error( "Leader election, could not find current leader" )
+ if oldLeader:
+ withdrawResult = oldLeaderCLI.electionTestWithdraw()
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=withdrawResult,
+ onpass="Node was withdrawn from election",
+ onfail="Node was not withdrawn from election" )
+
+ main.step( "Check that a new node was elected leader" )
+ failMessage = "Nodes have different leaders"
+ # Get new leaders and candidates
+ newLeaderResult, newLeaders = main.HA.consistentLeaderboards( activeCLIs )
+ newLeader = None
+ if newLeaderResult:
+ if newLeaders[ 0 ][ 0 ] == 'none':
+ main.log.error( "No leader was elected on at least 1 node" )
+ if not expectNoLeader:
+ newLeaderResult = False
+ newLeader = newLeaders[ 0 ][ 0 ]
+
+ # Check that the new leader is not the older leader, which was withdrawn
+ if newLeader == oldLeader:
+ newLeaderResult = False
+ main.log.error( "All nodes still see old leader: " + str( oldLeader ) +
+ " as the current leader" )
+ utilities.assert_equals(
+ expect=True,
+ actual=newLeaderResult,
+ onpass="Leadership election passed",
+ onfail="Something went wrong with Leadership election" )
+
+ main.step( "Check that that new leader was the candidate of old leader" )
+ # candidates[ 2 ] should become the top candidate after withdrawl
+ correctCandidateResult = main.TRUE
+ if expectNoLeader:
+ if newLeader == 'none':
+ main.log.info( "No leader expected. None found. Pass" )
+ correctCandidateResult = main.TRUE
+ else:
+ main.log.info( "Expected no leader, got: " + str( newLeader ) )
+ correctCandidateResult = main.FALSE
+ elif len( oldLeaders[0] ) >= 3:
+ if newLeader == oldLeaders[ 0 ][ 2 ]:
+ # correct leader was elected
+ correctCandidateResult = main.TRUE
+ else:
+ correctCandidateResult = main.FALSE
+ main.log.error( "Candidate {} was elected. {} should have had priority.".format(
+ newLeader, oldLeaders[ 0 ][ 2 ] ) )
+ else:
+ main.log.warn( "Could not determine who should be the correct leader" )
+ main.log.debug( oldLeaders[ 0 ] )
+ correctCandidateResult = main.FALSE
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=correctCandidateResult,
+ onpass="Correct Candidate Elected",
+ onfail="Incorrect Candidate Elected" )
+
+ main.step( "Run for election on old leader( just so everyone " +
+ "is in the hat )" )
+ if oldLeaderCLI is not None:
+ runResult = oldLeaderCLI.electionTestRun()
+ else:
+ main.log.error( "No old leader to re-elect" )
+ runResult = main.FALSE
+ utilities.assert_equals(
+ expect=main.TRUE,
+ actual=runResult,
+ onpass="App re-ran for election",
+ onfail="App failed to run for election" )
+
+ main.step(
+ "Check that oldLeader is a candidate, and leader if only 1 node" )
+ # verify leader didn't just change
+ # Get new leaders and candidates
+ reRunLeaders = []
+ time.sleep( 5 ) # Paremterize
+ positionResult, reRunLeaders = main.HA.consistentLeaderboards( activeCLIs )
+
+ # Check that the re-elected node is last on the candidate List
+ if not reRunLeaders[0]:
+ positionResult = main.FALSE
+ elif oldLeader != reRunLeaders[ 0 ][ -1 ]:
+ main.log.error( "Old Leader ({}) not in the proper position: {} ".format( str( oldLeader),
+ str( reRunLeaders[ 0 ] ) ) )
+ positionResult = main.FALSE
+ utilities.assert_equals(
+ expect=True,
+ actual=positionResult,
+ onpass="Old leader successfully re-ran for election",
+ onfail="Something went wrong with Leadership election after " +
+ "the old leader re-ran for election" )
+
+ def CASE16( self, main ):
+ """
+ Install Distributed Primitives app
+ """
+ import time
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+
+ # Variables for the distributed primitives tests
+ global pCounterName
+ global pCounterValue
+ global onosSet
+ global onosSetName
+ pCounterName = "TestON-Partitions"
+ pCounterValue = 0
+ onosSet = set([])
+ onosSetName = "TestON-set"
+
+ description = "Install Primitives app"
+ main.case( description )
+ main.step( "Install Primitives app" )
+ appName = "org.onosproject.distributedprimitives"
+ node = main.activeNodes[0]
+ appResults = main.CLIs[node].activateApp( appName )
+ utilities.assert_equals( expect=main.TRUE,
+ actual=appResults,
+ onpass="Primitives app activated",
+ onfail="Primitives app not activated" )
+ time.sleep( 5 ) # To allow all nodes to activate
+
+ def CASE17( self, main ):
+ """
+ Check for basic functionality with distributed primitives
+ """
+ # Make sure variables are defined/set
+ assert main.numCtrls, "main.numCtrls not defined"
+ assert main, "main not defined"
+ assert utilities.assert_equals, "utilities.assert_equals not defined"
+ assert main.CLIs, "main.CLIs not defined"
+ assert main.nodes, "main.nodes not defined"
+ assert pCounterName, "pCounterName not defined"
+ assert onosSetName, "onosSetName not defined"
+ # NOTE: assert fails if value is 0/None/Empty/False
+ try:
+ pCounterValue
+ except NameError:
+ main.log.error( "pCounterValue not defined, setting to 0" )
+ pCounterValue = 0
+ try:
+ onosSet
+ except NameError:
+ main.log.error( "onosSet not defined, setting to empty Set" )
+ onosSet = set([])
+ # Variables for the distributed primitives tests. These are local only
+ addValue = "a"
+ addAllValue = "a b c d e f"
+ retainValue = "c d e f"
+
+ description = "Check for basic functionality with distributed " +\
+ "primitives"
+ main.case( description )
+ main.caseExplanation = "Test the methods of the distributed " +\
+ "primitives (counters and sets) throught the cli"
+ # DISTRIBUTED ATOMIC COUNTERS
+ # Partitioned counters
+ main.step( "Increment then get a default counter on each node" )
+ pCounters = []
+ threads = []
+ addedPValues = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].counterTestAddAndGet,
+ name="counterAddAndGet-" + str( i ),
+ args=[ pCounterName ] )
+ pCounterValue += 1
+ addedPValues.append( pCounterValue )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ pCounters.append( t.result )
+ # Check that counter incremented numController times
+ pCounterResults = True
+ for i in addedPValues:
+ tmpResult = i in pCounters
+ pCounterResults = pCounterResults and tmpResult
+ if not tmpResult:
+ main.log.error( str( i ) + " is not in partitioned "
+ "counter incremented results" )
+ utilities.assert_equals( expect=True,
+ actual=pCounterResults,
+ onpass="Default counter incremented",
+ onfail="Error incrementing default" +
+ " counter" )
+
+ main.step( "Get then Increment a default counter on each node" )
+ pCounters = []
+ threads = []
+ addedPValues = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd,
+ name="counterGetAndAdd-" + str( i ),
+ args=[ pCounterName ] )
+ addedPValues.append( pCounterValue )
+ pCounterValue += 1
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ pCounters.append( t.result )
+ # Check that counter incremented numController times
+ pCounterResults = True
+ for i in addedPValues:
+ tmpResult = i in pCounters
+ pCounterResults = pCounterResults and tmpResult
+ if not tmpResult:
+ main.log.error( str( i ) + " is not in partitioned "
+ "counter incremented results" )
+ utilities.assert_equals( expect=True,
+ actual=pCounterResults,
+ onpass="Default counter incremented",
+ onfail="Error incrementing default" +
+ " counter" )
+
+ main.step( "Counters we added have the correct values" )
+ incrementCheck = main.HA.counterCheck( pCounterName, pCounterValue )
+ utilities.assert_equals( expect=main.TRUE,
+ actual=incrementCheck,
+ onpass="Added counters are correct",
+ onfail="Added counters are incorrect" )
+
+ main.step( "Add -8 to then get a default counter on each node" )
+ pCounters = []
+ threads = []
+ addedPValues = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].counterTestAddAndGet,
+ name="counterIncrement-" + str( i ),
+ args=[ pCounterName ],
+ kwargs={ "delta": -8 } )
+ pCounterValue += -8
+ addedPValues.append( pCounterValue )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ pCounters.append( t.result )
+ # Check that counter incremented numController times
+ pCounterResults = True
+ for i in addedPValues:
+ tmpResult = i in pCounters
+ pCounterResults = pCounterResults and tmpResult
+ if not tmpResult:
+ main.log.error( str( i ) + " is not in partitioned "
+ "counter incremented results" )
+ utilities.assert_equals( expect=True,
+ actual=pCounterResults,
+ onpass="Default counter incremented",
+ onfail="Error incrementing default" +
+ " counter" )
+
+ main.step( "Add 5 to then get a default counter on each node" )
+ pCounters = []
+ threads = []
+ addedPValues = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].counterTestAddAndGet,
+ name="counterIncrement-" + str( i ),
+ args=[ pCounterName ],
+ kwargs={ "delta": 5 } )
+ pCounterValue += 5
+ addedPValues.append( pCounterValue )
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ pCounters.append( t.result )
+ # Check that counter incremented numController times
+ pCounterResults = True
+ for i in addedPValues:
+ tmpResult = i in pCounters
+ pCounterResults = pCounterResults and tmpResult
+ if not tmpResult:
+ main.log.error( str( i ) + " is not in partitioned "
+ "counter incremented results" )
+ utilities.assert_equals( expect=True,
+ actual=pCounterResults,
+ onpass="Default counter incremented",
+ onfail="Error incrementing default" +
+ " counter" )
+
+ main.step( "Get then add 5 to a default counter on each node" )
+ pCounters = []
+ threads = []
+ addedPValues = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].counterTestGetAndAdd,
+ name="counterIncrement-" + str( i ),
+ args=[ pCounterName ],
+ kwargs={ "delta": 5 } )
+ addedPValues.append( pCounterValue )
+ pCounterValue += 5
+ threads.append( t )
+ t.start()
+
+ for t in threads:
+ t.join()
+ pCounters.append( t.result )
+ # Check that counter incremented numController times
+ pCounterResults = True
+ for i in addedPValues:
+ tmpResult = i in pCounters
+ pCounterResults = pCounterResults and tmpResult
+ if not tmpResult:
+ main.log.error( str( i ) + " is not in partitioned "
+ "counter incremented results" )
+ utilities.assert_equals( expect=True,
+ actual=pCounterResults,
+ onpass="Default counter incremented",
+ onfail="Error incrementing default" +
+ " counter" )
+
+ main.step( "Counters we added have the correct values" )
+ incrementCheck = main.HA.counterCheck( pCounterName, pCounterValue )
+ utilities.assert_equals( expect=main.TRUE,
+ actual=incrementCheck,
+ onpass="Added counters are correct",
+ onfail="Added counters are incorrect" )
+
+ # DISTRIBUTED SETS
+ main.step( "Distributed Set get" )
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+
+ getResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + node +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + node +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ utilities.assert_equals( expect=main.TRUE,
+ actual=getResults,
+ onpass="Set elements are correct",
+ onfail="Set elements are incorrect" )
+
+ main.step( "Distributed Set size" )
+ sizeResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+
+ sizeResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + node +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ utilities.assert_equals( expect=main.TRUE,
+ actual=sizeResults,
+ onpass="Set sizes are correct",
+ onfail="Set sizes are incorrect" )
+
+ main.step( "Distributed Set add()" )
+ onosSet.add( addValue )
+ addResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestAdd,
+ name="setTestAdd-" + str( i ),
+ args=[ onosSetName, addValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ addResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ addResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ if addResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif addResponses[ i ] == main.FALSE:
+ # Already in set, probably fine
+ pass
+ elif addResponses[ i ] == main.ERROR:
+ # Error in execution
+ addResults = main.FALSE
+ else:
+ # unexpected result
+ addResults = main.FALSE
+ if addResults != main.TRUE:
+ main.log.error( "Error executing set add" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + node + " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + node + " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + node +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ addResults = addResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=addResults,
+ onpass="Set add correct",
+ onfail="Set add was incorrect" )
+
+ main.step( "Distributed Set addAll()" )
+ onosSet.update( addAllValue.split() )
+ addResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestAdd,
+ name="setTestAddAll-" + str( i ),
+ args=[ onosSetName, addAllValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ addResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ addAllResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ if addResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif addResponses[ i ] == main.FALSE:
+ # Already in set, probably fine
+ pass
+ elif addResponses[ i ] == main.ERROR:
+ # Error in execution
+ addAllResults = main.FALSE
+ else:
+ # unexpected result
+ addAllResults = main.FALSE
+ if addAllResults != main.TRUE:
+ main.log.error( "Error executing set addAll" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + node +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + node +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + node +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ addAllResults = addAllResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=addAllResults,
+ onpass="Set addAll correct",
+ onfail="Set addAll was incorrect" )
+
+ main.step( "Distributed Set contains()" )
+ containsResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestGet,
+ name="setContains-" + str( i ),
+ args=[ onosSetName ],
+ kwargs={ "values": addValue } )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ # NOTE: This is the tuple
+ containsResponses.append( t.result )
+
+ containsResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ if containsResponses[ i ] == main.ERROR:
+ containsResults = main.FALSE
+ else:
+ containsResults = containsResults and\
+ containsResponses[ i ][ 1 ]
+ utilities.assert_equals( expect=main.TRUE,
+ actual=containsResults,
+ onpass="Set contains is functional",
+ onfail="Set contains failed" )
+
+ main.step( "Distributed Set containsAll()" )
+ containsAllResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestGet,
+ name="setContainsAll-" + str( i ),
+ args=[ onosSetName ],
+ kwargs={ "values": addAllValue } )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ # NOTE: This is the tuple
+ containsAllResponses.append( t.result )
+
+ containsAllResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ if containsResponses[ i ] == main.ERROR:
+ containsResults = main.FALSE
+ else:
+ containsResults = containsResults and\
+ containsResponses[ i ][ 1 ]
+ utilities.assert_equals( expect=main.TRUE,
+ actual=containsAllResults,
+ onpass="Set containsAll is functional",
+ onfail="Set containsAll failed" )
+
+ main.step( "Distributed Set remove()" )
+ onosSet.remove( addValue )
+ removeResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestRemove,
+ name="setTestRemove-" + str( i ),
+ args=[ onosSetName, addValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ removeResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ removeResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ if removeResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif removeResponses[ i ] == main.FALSE:
+ # not in set, probably fine
+ pass
+ elif removeResponses[ i ] == main.ERROR:
+ # Error in execution
+ removeResults = main.FALSE
+ else:
+ # unexpected result
+ removeResults = main.FALSE
+ if removeResults != main.TRUE:
+ main.log.error( "Error executing set remove" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + node +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + node +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + node +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ removeResults = removeResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=removeResults,
+ onpass="Set remove correct",
+ onfail="Set remove was incorrect" )
+
+ main.step( "Distributed Set removeAll()" )
+ onosSet.difference_update( addAllValue.split() )
+ removeAllResponses = []
+ threads = []
+ try:
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestRemove,
+ name="setTestRemoveAll-" + str( i ),
+ args=[ onosSetName, addAllValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ removeAllResponses.append( t.result )
+ except Exception, e:
+ main.log.exception(e)
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ removeAllResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ if removeAllResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif removeAllResponses[ i ] == main.FALSE:
+ # not in set, probably fine
+ pass
+ elif removeAllResponses[ i ] == main.ERROR:
+ # Error in execution
+ removeAllResults = main.FALSE
+ else:
+ # unexpected result
+ removeAllResults = main.FALSE
+ if removeAllResults != main.TRUE:
+ main.log.error( "Error executing set removeAll" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + node +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + node +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + node +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ removeAllResults = removeAllResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=removeAllResults,
+ onpass="Set removeAll correct",
+ onfail="Set removeAll was incorrect" )
+
+ main.step( "Distributed Set addAll()" )
+ onosSet.update( addAllValue.split() )
+ addResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestAdd,
+ name="setTestAddAll-" + str( i ),
+ args=[ onosSetName, addAllValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ addResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ addAllResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ if addResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif addResponses[ i ] == main.FALSE:
+ # Already in set, probably fine
+ pass
+ elif addResponses[ i ] == main.ERROR:
+ # Error in execution
+ addAllResults = main.FALSE
+ else:
+ # unexpected result
+ addAllResults = main.FALSE
+ if addAllResults != main.TRUE:
+ main.log.error( "Error executing set addAll" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + node +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + node +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + node +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ addAllResults = addAllResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=addAllResults,
+ onpass="Set addAll correct",
+ onfail="Set addAll was incorrect" )
+
+ main.step( "Distributed Set clear()" )
+ onosSet.clear()
+ clearResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestRemove,
+ name="setTestClear-" + str( i ),
+ args=[ onosSetName, " "], # Values doesn't matter
+ kwargs={ "clear": True } )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ clearResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ clearResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ if clearResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif clearResponses[ i ] == main.FALSE:
+ # Nothing set, probably fine
+ pass
+ elif clearResponses[ i ] == main.ERROR:
+ # Error in execution
+ clearResults = main.FALSE
+ else:
+ # unexpected result
+ clearResults = main.FALSE
+ if clearResults != main.TRUE:
+ main.log.error( "Error executing set clear" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + node +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + node +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + node +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ clearResults = clearResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=clearResults,
+ onpass="Set clear correct",
+ onfail="Set clear was incorrect" )
+
+ main.step( "Distributed Set addAll()" )
+ onosSet.update( addAllValue.split() )
+ addResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestAdd,
+ name="setTestAddAll-" + str( i ),
+ args=[ onosSetName, addAllValue ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ addResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ addAllResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ if addResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif addResponses[ i ] == main.FALSE:
+ # Already in set, probably fine
+ pass
+ elif addResponses[ i ] == main.ERROR:
+ # Error in execution
+ addAllResults = main.FALSE
+ else:
+ # unexpected result
+ addAllResults = main.FALSE
+ if addAllResults != main.TRUE:
+ main.log.error( "Error executing set addAll" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + node +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + node +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + node +
+ " expected a size of " + str( size ) +
+ " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ addAllResults = addAllResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=addAllResults,
+ onpass="Set addAll correct",
+ onfail="Set addAll was incorrect" )
+
+ main.step( "Distributed Set retain()" )
+ onosSet.intersection_update( retainValue.split() )
+ retainResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestRemove,
+ name="setTestRetain-" + str( i ),
+ args=[ onosSetName, retainValue ],
+ kwargs={ "retain": True } )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ retainResponses.append( t.result )
+
+ # main.TRUE = successfully changed the set
+ # main.FALSE = action resulted in no change in set
+ # main.ERROR - Some error in executing the function
+ retainResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ if retainResponses[ i ] == main.TRUE:
+ # All is well
+ pass
+ elif retainResponses[ i ] == main.FALSE:
+ # Already in set, probably fine
+ pass
+ elif retainResponses[ i ] == main.ERROR:
+ # Error in execution
+ retainResults = main.FALSE
+ else:
+ # unexpected result
+ retainResults = main.FALSE
+ if retainResults != main.TRUE:
+ main.log.error( "Error executing set retain" )
+
+ # Check if set is still correct
+ size = len( onosSet )
+ getResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestGet,
+ name="setTestGet-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ getResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if isinstance( getResponses[ i ], list):
+ current = set( getResponses[ i ] )
+ if len( current ) == len( getResponses[ i ] ):
+ # no repeats
+ if onosSet != current:
+ main.log.error( "ONOS" + node +
+ " has incorrect view" +
+ " of set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ main.log.debug( "Expected: " + str( onosSet ) )
+ main.log.debug( "Actual: " + str( current ) )
+ getResults = main.FALSE
+ else:
+ # error, set is not a set
+ main.log.error( "ONOS" + node +
+ " has repeat elements in" +
+ " set " + onosSetName + ":\n" +
+ str( getResponses[ i ] ) )
+ getResults = main.FALSE
+ elif getResponses[ i ] == main.ERROR:
+ getResults = main.FALSE
+ sizeResponses = []
+ threads = []
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].setTestSize,
+ name="setTestSize-" + str( i ),
+ args=[ onosSetName ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ sizeResponses.append( t.result )
+ sizeResults = main.TRUE
+ for i in range( len( main.activeNodes ) ):
+ node = str( main.activeNodes[i] + 1 )
+ if size != sizeResponses[ i ]:
+ sizeResults = main.FALSE
+ main.log.error( "ONOS" + node + " expected a size of " +
+ str( size ) + " for set " + onosSetName +
+ " but got " + str( sizeResponses[ i ] ) )
+ retainResults = retainResults and getResults and sizeResults
+ utilities.assert_equals( expect=main.TRUE,
+ actual=retainResults,
+ onpass="Set retain correct",
+ onfail="Set retain was incorrect" )
+
+ # Transactional maps
+ main.step( "Partitioned Transactional maps put" )
+ tMapValue = "Testing"
+ numKeys = 100
+ putResult = True
+ node = main.activeNodes[0]
+ putResponses = main.CLIs[node].transactionalMapPut( numKeys, tMapValue )
+ if putResponses and len( putResponses ) == 100:
+ for i in putResponses:
+ if putResponses[ i ][ 'value' ] != tMapValue:
+ putResult = False
+ else:
+ putResult = False
+ if not putResult:
+ main.log.debug( "Put response values: " + str( putResponses ) )
+ utilities.assert_equals( expect=True,
+ actual=putResult,
+ onpass="Partitioned Transactional Map put successful",
+ onfail="Partitioned Transactional Map put values are incorrect" )
+
+ main.step( "Partitioned Transactional maps get" )
+ getCheck = True
+ for n in range( 1, numKeys + 1 ):
+ getResponses = []
+ threads = []
+ valueCheck = True
+ for i in main.activeNodes:
+ t = main.Thread( target=main.CLIs[i].transactionalMapGet,
+ name="TMap-get-" + str( i ),
+ args=[ "Key" + str( n ) ] )
+ threads.append( t )
+ t.start()
+ for t in threads:
+ t.join()
+ getResponses.append( t.result )
+ for node in getResponses:
+ if node != tMapValue:
+ valueCheck = False
+ if not valueCheck:
+ main.log.warn( "Values for key 'Key" + str( n ) + "' do not match:" )
+ main.log.warn( getResponses )
+ getCheck = getCheck and valueCheck
+ utilities.assert_equals( expect=True,
+ actual=getCheck,
+ onpass="Partitioned Transactional Map get values were correct",
+ onfail="Partitioned Transactional Map values incorrect" )
diff --git a/TestON/tests/HA/HAfullNetPartition/HAfullNetPartition.topo b/TestON/tests/HA/HAfullNetPartition/HAfullNetPartition.topo
new file mode 100644
index 0000000..81cf47a
--- /dev/null
+++ b/TestON/tests/HA/HAfullNetPartition/HAfullNetPartition.topo
@@ -0,0 +1,171 @@
+<TOPOLOGY>
+ <COMPONENT>
+
+ <ONOSbench>
+ <host>localhost</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>1</connect_order>
+ <COMPONENTS>
+ </COMPONENTS>
+ </ONOSbench>
+
+ <ONOScli1>
+ <host>localhost</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosCliDriver</type>
+ <connect_order>2</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli1>
+
+ <ONOScli2>
+ <host>localhost</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosCliDriver</type>
+ <connect_order>3</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli2>
+
+ <ONOScli3>
+ <host>localhost</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosCliDriver</type>
+ <connect_order>4</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli3>
+
+
+ <ONOScli4>
+ <host>localhost</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosCliDriver</type>
+ <connect_order>5</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli4>
+
+
+ <ONOScli5>
+ <host>localhost</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosCliDriver</type>
+ <connect_order>6</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli5>
+
+
+ <ONOScli6>
+ <host>localhost</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosCliDriver</type>
+ <connect_order>7</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli6>
+
+
+ <ONOScli7>
+ <host>localhost</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosCliDriver</type>
+ <connect_order>8</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOScli7>
+
+ <ONOS1>
+ <host>OC1</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>9</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS1>
+
+ <ONOS2>
+ <host>OC2</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>10</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS2>
+
+ <ONOS3>
+ <host>OC3</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>11</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS3>
+
+ <ONOS4>
+ <host>OC4</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>12</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS4>
+
+ <ONOS5>
+ <host>OC5</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>13</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS5>
+
+ <ONOS6>
+ <host>OC6</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>14</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS6>
+
+ <ONOS7>
+ <host>OC7</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>OnosDriver</type>
+ <connect_order>15</connect_order>
+ <COMPONENTS> </COMPONENTS>
+ </ONOS7>
+
+ <Mininet1>
+ <host>OCN</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>MininetCliDriver</type>
+ <connect_order>16</connect_order>
+ <COMPONENTS>
+ #Specify the Option for mininet
+ <arg1> --custom ~/mininet/custom/obelisk.py </arg1>
+ <arg2> --topo obelisk </arg2>
+ <arg3> --switch ovs,protocols=OpenFlow13 </arg3>
+ <controller> none </controller>
+ <home>~/mininet/custom/</home>
+ </COMPONENTS>
+ </Mininet1>
+
+ <Mininet2>
+ <host>OCN</host>
+ <user>sdn</user>
+ <password>rocks</password>
+ <type>RemoteMininetDriver</type>
+ <connect_order>17</connect_order>
+ <COMPONENTS>
+ </COMPONENTS>
+ </Mininet2>
+
+ </COMPONENT>
+</TOPOLOGY>
diff --git a/TestON/tests/HA/HAfullNetPartition/README b/TestON/tests/HA/HAfullNetPartition/README
new file mode 100644
index 0000000..415af4c
--- /dev/null
+++ b/TestON/tests/HA/HAfullNetPartition/README
@@ -0,0 +1,27 @@
+This test is designed to verify that an ONOS cluster behaves correctly when
+some ONOS nodes are partitioned. Currently, we will partition nodes so that
+each raft partition will lose a member, but we make sure that there is always
+a majority of nodes available in each partition. We are partitioning the nodes
+by using iptable firewall rules
+
+As written, the test only supports an ONOS cluster of 3,5, or 7 nodes.
+This is because the test doesn't apply to a single node cluster, ONOS clusters
+should be deployed in odd numbers, and the raft partition generation and node
+partitioning scheme used doesn't give the same properties for clusters of more
+than 7 nodes. Namely, each partition won't have exactly one node unavailable.
+
+The gerneral structure for the test:
+- Startup
+- Assign switches
+- Verify ONOS state and functionality
+ - Device mastership
+ - Intents
+ - Leadership election
+ - Distributed Primitives
+- Partition some ONOS nodes
+- Verify ONOS state and functionality
+- Heal partition
+- Verify ONOS state and functionality
+- Dataplane failures
+ - link down and up
+ - switch down and up
diff --git a/TestON/tests/HA/HAfullNetPartition/__init__.py b/TestON/tests/HA/HAfullNetPartition/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/TestON/tests/HA/HAfullNetPartition/__init__.py
diff --git a/TestON/tests/HA/HAfullNetPartition/dependencies/__init__.py b/TestON/tests/HA/HAfullNetPartition/dependencies/__init__.py
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/TestON/tests/HA/HAfullNetPartition/dependencies/__init__.py