diff --git a/TestON/tests/FUNCintentRest/Dependency/FuncIntentFunction.py b/TestON/tests/FUNCintentRest/Dependency/FuncIntentFunction.py
new file mode 100644
index 0000000..6bbbb84
--- /dev/null
+++ b/TestON/tests/FUNCintentRest/Dependency/FuncIntentFunction.py
@@ -0,0 +1,1061 @@
+"""
+    Wrapper functions for FuncIntent
+    This functions include Onosclidriver and Mininetclidriver driver functions
+    Author: kelvin@onlab.us
+"""
+import time
+import copy
+import json
+
+def __init__( self ):
+    self.default = ''
+
+def hostIntent( main,
+                name,
+                host1,
+                host2,
+                onosNode=0,
+                host1Id="",
+                host2Id="",
+                mac1="",
+                mac2="",
+                vlan1="-1",
+                vlan2="-1",
+                sw1="",
+                sw2="",
+                expectedLink=0 ):
+    """
+        Description:
+            Verify add-host-intent
+        Steps:
+            - Discover hosts
+            - Add host intents
+            - Check intents
+            - Verify flows
+            - Ping hosts
+            - Reroute
+                - Link down
+                - Verify flows
+                - Check topology
+                - Ping hosts
+                - Link up
+                - Verify flows
+                - Check topology
+                - Ping hosts
+            - Remove intents
+        Required:
+            name - Type of host intent to add eg. IPV4 | VLAN | Dualstack
+            host1 - Name of first host
+            host2 - Name of second host
+        Optional:
+            onosNode - ONOS node to install the intents in main.CLIs[ ]
+                       0 by default so that it will always use the first
+                       ONOS node
+            host1Id - ONOS id of the first host eg. 00:00:00:00:00:01/-1
+            host2Id - ONOS id of the second host
+            mac1 - Mac address of first host
+            mac2 - Mac address of the second host
+            vlan1 - Vlan tag of first host, defaults to -1
+            vlan2 - Vlan tag of second host, defaults to -1
+            sw1 - First switch to bring down & up for rerouting purpose
+            sw2 - Second switch to bring down & up for rerouting purpose
+            expectedLink - Expected link when the switches are down, it should
+                           be two links lower than the links before the two
+                           switches are down
+    """
+
+    # Assert variables
+    assert main, "There is no main variable"
+    assert name, "variable name is empty"
+    assert host1 and host2, "You must specify hosts"
+
+    global itemName
+    itemName = name
+    h1Id = host1Id
+    h2Id = host2Id
+    h1Mac = mac1
+    h2Mac = mac2
+    vlan1 = vlan1
+    vlan2 = vlan2
+    hostNames = [ host1 , host2 ]
+    intentsId = []
+    stepResult = main.TRUE
+    pingResult = main.TRUE
+    intentResult = main.TRUE
+    removeIntentResult = main.TRUE
+    flowResult = main.TRUE
+    topoResult = main.TRUE
+    linkDownResult = main.TRUE
+    linkUpResult = main.TRUE
+    onosNode = int( onosNode )
+
+    if main.hostsData:
+        if not h1Mac:
+            h1Mac = main.hostsData[ host1 ][ 'mac' ]
+        if not h2Mac:
+            h2Mac = main.hostsData[ host2 ][ 'mac' ]
+        if main.hostsData[ host1 ][ 'vlan' ] != '-1':
+            vlan1 = main.hostsData[ host1 ][ 'vlan' ]
+        if main.hostsData[ host2 ][ 'vlan' ] != '-1':
+            vlan2 = main.hostsData[ host2 ][ 'vlan' ]
+        if not h1Id:
+            h1Id = main.hostsData[ host1 ][ 'id' ]
+        if not h2Id:
+            h2Id = main.hostsData[ host2 ][ 'id' ]
+
+    assert h1Id and h2Id, "You must specify host IDs"
+    if not ( h1Id and h2Id ):
+        main.log.info( "There are no host IDs" )
+        return main.FALSE
+
+    # Discover hosts using arping
+    if not main.hostsData:
+        main.log.info( itemName + ": Discover host using arping" )
+        main.Mininet1.arping( host=host1 )
+        main.Mininet1.arping( host=host2 )
+        h1Id = main.CLIs[ 0 ].getHost( mac=h1Mac )
+        h2Id = main.CLIs[ 0 ].getHost( mac=h2Mac )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+
+    # Adding host intents
+    main.log.info( itemName + ": Adding host intents" )
+
+    intent1 = main.CLIs[ onosNode ].addHostIntent( hostIdOne=h1Id,
+                                                   hostIdTwo=h2Id )
+
+    time.sleep( main.hostIntentSleep )
+    intentsId = main.CLIs[ 0 ].getIntentsId()
+    print intentsId
+
+    # Check intents state
+    time.sleep( main.checkIntentSleep )
+    intentResult = checkIntentState( main, intentsId )
+    checkFlowsCount( main )
+
+    # Check intents state again if first check fails...
+    if not intentResult:
+        intentResult = checkIntentState( main, intentsId )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+    # Verify flows
+    checkFlowsState( main )
+
+    # Ping hosts
+    firstPingResult = pingallHosts( main, hostNames )
+    if not firstPingResult:
+        main.log.debug( "First ping failed, there must be" +
+                       " something wrong with ONOS performance" )
+
+    # Ping hosts again...
+    pingResult = pingResult and pingallHosts( main, hostNames )
+
+    # Test rerouting if these variables exist
+    if sw1 and sw2 and expectedLink:
+        # link down
+        linkDownResult = link( main, sw1, sw2, "down" )
+        intentResult = intentResult and checkIntentState( main, intentsId )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, expectedLink )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link down
+        if linkDownResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link down" )
+        else:
+            main.log.error( itemName + ": Failed to bring link down" )
+
+        # link up
+        linkUpResult = link( main, sw1, sw2, "up" )
+        time.sleep( main.rerouteSleep )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, main.numLinks )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link up
+        if linkUpResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link back up" )
+        else:
+            main.log.error( itemName + ": Failed to bring link back up" )
+
+    # Remove all intents
+    removeIntentResult = removeAllIntents( main )
+
+    stepResult = pingResult and linkDownResult and linkUpResult \
+                 and intentResult and removeIntentResult
+
+    return stepResult
+
+def pointIntent( main,
+                 name,
+                 host1,
+                 host2,
+                 onosNode=0,
+                 deviceId1="",
+                 deviceId2="",
+                 port1="",
+                 port2="",
+                 ethType="",
+                 mac1="",
+                 mac2="",
+                 bandwidth="",
+                 lambdaAlloc=False,
+                 ipProto="",
+                 ip1="",
+                 ip2="",
+                 tcp1="",
+                 tcp2="",
+                 sw1="",
+                 sw2="",
+                 expectedLink=0 ):
+
+    """
+        Description:
+            Verify add-point-intent
+        Steps:
+            - Get device ids | ports
+            - Add point intents
+            - Check intents
+            - Verify flows
+            - Ping hosts
+            - Reroute
+                - Link down
+                - Verify flows
+                - Check topology
+                - Ping hosts
+                - Link up
+                - Verify flows
+                - Check topology
+                - Ping hosts
+            - Remove intents
+        Required:
+            name - Type of point intent to add eg. IPV4 | VLAN | Dualstack
+            host1 - Name of first host
+            host2 - Name of second host
+        Optional:
+            onosNode - ONOS node to install the intents in main.CLIs[ ]
+                       0 by default so that it will always use the first
+                       ONOS node
+            deviceId1 - ONOS device id of the first switch, the same as the
+                        location of the first host eg. of:0000000000000001/1,
+                        located at device 1 port 1
+            deviceId2 - ONOS device id of the second switch
+            port1 - The port number where the first host is attached
+            port2 - The port number where the second host is attached
+            ethType - Ethernet type eg. IPV4, IPV6
+            mac1 - Mac address of first host
+            mac2 - Mac address of the second host
+            bandwidth - Bandwidth capacity
+            lambdaAlloc - Allocate lambda, defaults to False
+            ipProto - IP protocol
+            ip1 - IP address of first host
+            ip2 - IP address of second host
+            tcp1 - TCP port of first host
+            tcp2 - TCP port of second host
+            sw1 - First switch to bring down & up for rerouting purpose
+            sw2 - Second switch to bring down & up for rerouting purpose
+            expectedLink - Expected link when the switches are down, it should
+                           be two links lower than the links before the two
+                           switches are down
+    """
+
+    assert main, "There is no main variable"
+    assert name, "variable name is empty"
+    assert host1 and host2, "You must specify hosts"
+
+    global itemName
+    itemName = name
+    host1 = host1
+    host2 = host2
+    hostNames = [ host1, host2 ]
+    intentsId = []
+
+    pingResult = main.TRUE
+    intentResult = main.TRUE
+    removeIntentResult = main.TRUE
+    flowResult = main.TRUE
+    topoResult = main.TRUE
+    linkDownResult = main.TRUE
+    linkUpResult = main.TRUE
+    onosNode = int( onosNode )
+
+    # Adding bidirectional point  intents
+    main.log.info( itemName + ": Adding point intents" )
+    intent1 = main.CLIs[ onosNode ].addPointIntent( ingressDevice=deviceId1,
+                                                    egressDevice=deviceId2,
+                                                    ingressPort=port1,
+                                                    egressPort=port2,
+                                                    ethType=ethType,
+                                                    ethSrc=mac1,
+                                                    ethDst=mac2,
+                                                    bandwidth=bandwidth,
+                                                    lambdaAlloc=lambdaAlloc,
+                                                    ipProto=ipProto,
+                                                    ipSrc=ip1,
+                                                    ipDst=ip2,
+                                                    tcpSrc=tcp1,
+                                                    tcpDst=tcp2 )
+
+    intent2 = main.CLIs[ onosNode ].addPointIntent( ingressDevice=deviceId2,
+                                                    egressDevice=deviceId1,
+                                                    ingressPort=port2,
+                                                    egressPort=port1,
+                                                    ethType=ethType,
+                                                    ethSrc=mac2,
+                                                    ethDst=mac1,
+                                                    bandwidth=bandwidth,
+                                                    lambdaAlloc=lambdaAlloc,
+                                                    ipProto=ipProto,
+                                                    ipSrc=ip2,
+                                                    ipDst=ip1,
+                                                    tcpSrc=tcp2,
+                                                    tcpDst=tcp1 )
+    intentsId = main.CLIs[ 0 ].getIntentsId()
+    print intentsId
+
+    # Check intents state
+    time.sleep( main.checkIntentSleep )
+    intentResult = checkIntentState( main, intentsId )
+    # Check flows count in each node
+    checkFlowsCount( main )
+
+    # Check intents state again if first check fails...
+    if not intentResult:
+        intentResult = checkIntentState( main, intentsId )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+    # Verify flows
+    checkFlowsState( main )
+
+    # Ping hosts
+    firstPingResult = pingallHosts( main, hostNames )
+    if not firstPingResult:
+        main.log.debug( "First ping failed, there must be" +
+                       " something wrong with ONOS performance" )
+
+    # Ping hosts again...
+    pingResult = pingResult and pingallHosts( main, hostNames )
+
+    # Test rerouting if these variables exist
+    if sw1 and sw2 and expectedLink:
+        # link down
+        linkDownResult = link( main, sw1, sw2, "down" )
+        intentResult = intentResult and checkIntentState( main, intentsId )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, expectedLink )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link down
+        if linkDownResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link down" )
+        else:
+            main.log.error( itemName + ": Failed to bring link down" )
+
+        # link up
+        linkUpResult = link( main, sw1, sw2, "up" )
+        time.sleep( main.rerouteSleep )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, main.numLinks )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link up
+        if linkUpResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link back up" )
+        else:
+            main.log.error( itemName + ": Failed to bring link back up" )
+
+    # Remove all intents
+    removeIntentResult = removeAllIntents( main )
+
+    stepResult = pingResult and linkDownResult and linkUpResult \
+                 and intentResult and removeIntentResult
+
+    return stepResult
+
+def singleToMultiIntent( main,
+                         name,
+                         hostNames,
+                         onosNode=0,
+                         devices="",
+                         ports=None,
+                         ethType="",
+                         macs=None,
+                         bandwidth="",
+                         lambdaAlloc=False,
+                         ipProto="",
+                         ipAddresses="",
+                         tcp="",
+                         sw1="",
+                         sw2="",
+                         expectedLink=0 ):
+    """
+        Verify Single to Multi Point intents
+        NOTE:If main.hostsData is not defined, variables data should be passed
+        in the same order index wise. All devices in the list should have the
+        same format, either all the devices have its port or it doesn't.
+        eg. hostName = [ 'h1', 'h2' ,..  ]
+            devices = [ 'of:0000000000000001', 'of:0000000000000002', ...]
+            ports = [ '1', '1', ..]
+            ...
+        Description:
+            Verify add-single-to-multi-intent iterates through the list of given
+            host | devices and add intents
+        Steps:
+            - Get device ids | ports
+            - Add single to multi point intents
+            - Check intents
+            - Verify flows
+            - Ping hosts
+            - Reroute
+                - Link down
+                - Verify flows
+                - Check topology
+                - Ping hosts
+                - Link up
+                - Verify flows
+                - Check topology
+                - Ping hosts
+            - Remove intents
+        Required:
+            name - Type of point intent to add eg. IPV4 | VLAN | Dualstack
+            hostNames - List of host names
+        Optional:
+            onosNode - ONOS node to install the intents in main.CLIs[ ]
+                       0 by default so that it will always use the first
+                       ONOS node
+            devices - List of device ids in the same order as the hosts
+                      in hostNames
+            ports - List of port numbers in the same order as the device in
+                    devices
+            ethType - Ethernet type eg. IPV4, IPV6
+            macs - List of hosts mac address in the same order as the hosts in
+                   hostNames
+            bandwidth - Bandwidth capacity
+            lambdaAlloc - Allocate lambda, defaults to False
+            ipProto - IP protocol
+            ipAddresses - IP addresses of host in the same order as the hosts in
+                          hostNames
+            tcp - TCP ports in the same order as the hosts in hostNames
+            sw1 - First switch to bring down & up for rerouting purpose
+            sw2 - Second switch to bring down & up for rerouting purpose
+            expectedLink - Expected link when the switches are down, it should
+                           be two links lower than the links before the two
+                           switches are down
+    """
+
+    assert main, "There is no main variable"
+    assert hostNames, "You must specify hosts"
+    assert devices or main.hostsData, "You must specify devices"
+
+    global itemName
+    itemName = name
+    tempHostsData = {}
+    intentsId = []
+    onosNode = int( onosNode )
+
+    macsDict = {}
+    ipDict = {}
+    if hostNames and devices:
+        if len( hostNames ) != len( devices ):
+            main.log.debug( "hosts and devices does not have the same length" )
+            #print "len hostNames = ", len( hostNames )
+            #print "len devices = ", len( devices )
+            return main.FALSE
+        if ports:
+            if len( ports ) != len( devices ):
+                main.log.error( "Ports and devices does " +
+                                "not have the same length" )
+                #print "len devices = ", len( devices )
+                #print "len ports = ", len( ports )
+                return main.FALSE
+        else:
+            main.log.info( "Device Ports are not specified" )
+        if macs:
+            for i in range( len( devices ) ):
+                macsDict[ devices[ i ] ] = macs[ i ]
+
+    elif hostNames and not devices and main.hostsData:
+        devices = []
+        main.log.info( "singleToMultiIntent function is using main.hostsData" )
+        for host in hostNames:
+               devices.append( main.hostsData.get( host ).get( 'location' ) )
+               macsDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+                           main.hostsData.get( host ).get( 'mac' )
+               ipDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+                           main.hostsData.get( host ).get( 'ipAddresses' )
+        #print main.hostsData
+
+    #print 'host names = ', hostNames
+    #print 'devices = ', devices
+    #print "macsDict = ", macsDict
+
+    pingResult = main.TRUE
+    intentResult = main.TRUE
+    removeIntentResult = main.TRUE
+    flowResult = main.TRUE
+    topoResult = main.TRUE
+    linkDownResult = main.TRUE
+    linkUpResult = main.TRUE
+
+    devicesCopy = copy.copy( devices )
+    if ports:
+        portsCopy = copy.copy( ports )
+    main.log.info( itemName + ": Adding single point to multi point intents" )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+
+    # Adding bidirectional point  intents
+    for i in range( len( devices ) ):
+        ingressDevice = devicesCopy[ i ]
+        egressDeviceList = copy.copy( devicesCopy )
+        egressDeviceList.remove( ingressDevice )
+        if ports:
+            portIngress = portsCopy[ i ]
+            portEgressList = copy.copy( portsCopy )
+            del portEgressList[ i ]
+        else:
+            portIngress = ""
+            portEgressList = None
+        if not macsDict:
+            srcMac = ""
+        else:
+            srcMac = macsDict[ ingressDevice ]
+            if srcMac == None:
+                main.log.debug( "There is no MAC in device - " + ingressDevice )
+                srcMac = ""
+
+        intentsId.append(
+                        main.CLIs[ onosNode ].addSinglepointToMultipointIntent(
+                                            ingressDevice=ingressDevice,
+                                            egressDeviceList=egressDeviceList,
+                                            portIngress=portIngress,
+                                            portEgressList=portEgressList,
+                                            ethType=ethType,
+                                            ethSrc=srcMac,
+                                            bandwidth=bandwidth,
+                                            lambdaAlloc=lambdaAlloc,
+                                            ipProto=ipProto,
+                                            ipSrc="",
+                                            ipDst="",
+                                            tcpSrc="",
+                                            tcpDst="" ) )
+
+    # Wait some time for the flow to go through when using multi instance
+    pingResult = pingallHosts( main, hostNames )
+
+    # Check intents state
+    time.sleep( main.checkIntentSleep )
+    intentResult = checkIntentState( main, intentsId )
+
+    # Check intents state again if first check fails...
+    if not intentResult:
+        intentResult = checkIntentState( main, intentsId )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+    # Verify flows
+    checkFlowsState( main )
+
+    pingResult = pingResult and pingallHosts( main, hostNames )
+
+    # Test rerouting if these variables exist
+    if sw1 and sw2 and expectedLink:
+        # link down
+        linkDownResult = link( main, sw1, sw2, "down" )
+        intentResult = intentResult and checkIntentState( main, intentsId )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, expectedLink )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link down
+        if linkDownResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link down" )
+        else:
+            main.log.error( itemName + ": Failed to bring link down" )
+
+        # link up
+        linkUpResult = link( main, sw1, sw2, "up" )
+        time.sleep( main.rerouteSleep )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, main.numLinks )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link up
+        if linkUpResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link back up" )
+        else:
+            main.log.error( itemName + ": Failed to bring link back up" )
+
+    # Remove all intents
+    removeIntentResult = removeAllIntents( main, intentsId )
+
+    stepResult = pingResult and linkDownResult and linkUpResult \
+                 and intentResult and removeIntentResult
+
+    return stepResult
+
+def multiToSingleIntent( main,
+                         name,
+                         hostNames,
+                         onosNode=0,
+                         devices="",
+                         ports=None,
+                         ethType="",
+                         macs=None,
+                         bandwidth="",
+                         lambdaAlloc=False,
+                         ipProto="",
+                         ipAddresses="",
+                         tcp="",
+                         sw1="",
+                         sw2="",
+                         expectedLink=0 ):
+    """
+        Verify Single to Multi Point intents
+        NOTE:If main.hostsData is not defined, variables data should be passed in the
+        same order index wise. All devices in the list should have the same
+        format, either all the devices have its port or it doesn't.
+        eg. hostName = [ 'h1', 'h2' ,..  ]
+            devices = [ 'of:0000000000000001', 'of:0000000000000002', ...]
+            ports = [ '1', '1', ..]
+            ...
+        Description:
+            Verify add-multi-to-single-intent
+        Steps:
+            - Get device ids | ports
+            - Add multi to single point intents
+            - Check intents
+            - Verify flows
+            - Ping hosts
+            - Reroute
+                - Link down
+                - Verify flows
+                - Check topology
+                - Ping hosts
+                - Link up
+                - Verify flows
+                - Check topology
+                - Ping hosts
+            - Remove intents
+        Required:
+            name - Type of point intent to add eg. IPV4 | VLAN | Dualstack
+            hostNames - List of host names
+        Optional:
+            onosNode - ONOS node to install the intents in main.CLIs[ ]
+                       0 by default so that it will always use the first
+                       ONOS node
+            devices - List of device ids in the same order as the hosts
+                      in hostNames
+            ports - List of port numbers in the same order as the device in
+                    devices
+            ethType - Ethernet type eg. IPV4, IPV6
+            macs - List of hosts mac address in the same order as the hosts in
+                   hostNames
+            bandwidth - Bandwidth capacity
+            lambdaAlloc - Allocate lambda, defaults to False
+            ipProto - IP protocol
+            ipAddresses - IP addresses of host in the same order as the hosts in
+                          hostNames
+            tcp - TCP ports in the same order as the hosts in hostNames
+            sw1 - First switch to bring down & up for rerouting purpose
+            sw2 - Second switch to bring down & up for rerouting purpose
+            expectedLink - Expected link when the switches are down, it should
+                           be two links lower than the links before the two
+                           switches are down
+    """
+
+    assert main, "There is no main variable"
+    assert hostNames, "You must specify hosts"
+    assert devices or main.hostsData, "You must specify devices"
+
+    global itemName
+    itemName = name
+    tempHostsData = {}
+    intentsId = []
+    onosNode = int( onosNode )
+
+    macsDict = {}
+    ipDict = {}
+    if hostNames and devices:
+        if len( hostNames ) != len( devices ):
+            main.log.debug( "hosts and devices does not have the same length" )
+            #print "len hostNames = ", len( hostNames )
+            #print "len devices = ", len( devices )
+            return main.FALSE
+        if ports:
+            if len( ports ) != len( devices ):
+                main.log.error( "Ports and devices does " +
+                                "not have the same length" )
+                #print "len devices = ", len( devices )
+                #print "len ports = ", len( ports )
+                return main.FALSE
+        else:
+            main.log.info( "Device Ports are not specified" )
+        if macs:
+            for i in range( len( devices ) ):
+                macsDict[ devices[ i ] ] = macs[ i ]
+    elif hostNames and not devices and main.hostsData:
+        devices = []
+        main.log.info( "multiToSingleIntent function is using main.hostsData" )
+        for host in hostNames:
+               devices.append( main.hostsData.get( host ).get( 'location' ) )
+               macsDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+                           main.hostsData.get( host ).get( 'mac' )
+               ipDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+                           main.hostsData.get( host ).get( 'ipAddresses' )
+        #print main.hostsData
+
+    #print 'host names = ', hostNames
+    #print 'devices = ', devices
+    #print "macsDict = ", macsDict
+
+    pingResult = main.TRUE
+    intentResult = main.TRUE
+    removeIntentResult = main.TRUE
+    flowResult = main.TRUE
+    topoResult = main.TRUE
+    linkDownResult = main.TRUE
+    linkUpResult = main.TRUE
+
+    devicesCopy = copy.copy( devices )
+    if ports:
+        portsCopy = copy.copy( ports )
+    main.log.info( itemName + ": Adding multi point to single point intents" )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+
+    # Adding bidirectional point  intents
+    for i in range( len( devices ) ):
+        egressDevice = devicesCopy[ i ]
+        ingressDeviceList = copy.copy( devicesCopy )
+        ingressDeviceList.remove( egressDevice )
+        if ports:
+            portEgress = portsCopy[ i ]
+            portIngressList = copy.copy( portsCopy )
+            del portIngressList[ i ]
+        else:
+            portEgress = ""
+            portIngressList = None
+        if not macsDict:
+            dstMac = ""
+        else:
+            dstMac = macsDict[ egressDevice ]
+            if dstMac == None:
+                main.log.debug( "There is no MAC in device - " + egressDevice )
+                dstMac = ""
+
+        intentsId.append(
+                        main.CLIs[ onosNode ].addMultipointToSinglepointIntent(
+                                            ingressDeviceList=ingressDeviceList,
+                                            egressDevice=egressDevice,
+                                            portIngressList=portIngressList,
+                                            portEgress=portEgress,
+                                            ethType=ethType,
+                                            ethDst=dstMac,
+                                            bandwidth=bandwidth,
+                                            lambdaAlloc=lambdaAlloc,
+                                            ipProto=ipProto,
+                                            ipSrc="",
+                                            ipDst="",
+                                            tcpSrc="",
+                                            tcpDst="" ) )
+
+    pingResult = pingallHosts( main, hostNames )
+
+    # Check intents state
+    time.sleep( main.checkIntentSleep )
+    intentResult = checkIntentState( main, intentsId )
+
+    # Check intents state again if first check fails...
+    if not intentResult:
+        intentResult = checkIntentState( main, intentsId )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+    # Verify flows
+    checkFlowsState( main )
+
+    # Ping hosts
+    pingResult = pingResult and pingallHosts( main, hostNames )
+    # Ping hosts again...
+    pingResult = pingResult and pingallHosts( main, hostNames )
+
+    # Test rerouting if these variables exist
+    if sw1 and sw2 and expectedLink:
+        # link down
+        linkDownResult = link( main, sw1, sw2, "down" )
+        intentResult = intentResult and checkIntentState( main, intentsId )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, expectedLink )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link down
+        if linkDownResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link down" )
+        else:
+            main.log.error( itemName + ": Failed to bring link down" )
+
+        # link up
+        linkUpResult = link( main, sw1, sw2, "up" )
+        time.sleep( main.rerouteSleep )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, main.numLinks )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link up
+        if linkUpResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link back up" )
+        else:
+            main.log.error( itemName + ": Failed to bring link back up" )
+
+    # Remove all intents
+    removeIntentResult = removeAllIntents( main, intentsId )
+
+    stepResult = pingResult and linkDownResult and linkUpResult \
+                 and intentResult and removeIntentResult
+
+    return stepResult
+
+def pingallHosts( main, hostList, pingType="ipv4" ):
+    # Ping all host in the hosts list variable
+    print "Pinging : ", hostList
+    pingResult = main.TRUE
+    pingResult = main.Mininet1.pingallHosts( hostList, pingType )
+    return pingResult
+
+def getHostsData( main ):
+    """
+        Use fwd app and pingall to discover all the hosts
+    """
+
+    activateResult = main.TRUE
+    appCheck = main.TRUE
+    getDataResult = main.TRUE
+    main.log.info( "Activating reactive forwarding app " )
+    activateResult = main.CLIs[ 0 ].activateApp( "org.onosproject.fwd" )
+    if not activateResult:
+        main.log.error( "Something went wrong installing fwd app" )
+    time.sleep( main.fwdSleep )
+    pingResult = main.Mininet1.pingall( timeout = 600 )
+    hostsJson = json.loads( main.CLIs[ 0 ].hosts() )
+    hosts = main.Mininet1.getHosts().keys()
+    # TODO: Make better use of new getHosts function
+    for host in hosts:
+        main.hostsData[ host ] = {}
+        main.hostsData[ host ][ 'mac' ] =  \
+            main.Mininet1.getMacAddress( host ).upper()
+        for hostj in hostsJson:
+            if main.hostsData[ host ][ 'mac' ] == hostj[ 'mac' ]:
+                main.hostsData[ host ][ 'id' ] = hostj[ 'id' ]
+                main.hostsData[ host ][ 'vlan' ] = hostj[ 'vlan' ]
+                main.hostsData[ host ][ 'location' ] = \
+                            hostj[ 'location' ][ 'elementId' ] + '/' + \
+                            hostj[ 'location' ][ 'port' ]
+                main.hostsData[ host ][ 'ipAddresses' ] = hostj[ 'ipAddresses' ]
+
+    main.log.info( "Deactivating reactive forwarding app " )
+    deactivateResult = main.CLIs[ 0 ].deactivateApp( "org.onosproject.fwd" )
+    if activateResult and deactivateResult and main.hostsData:
+        main.log.info( "Successfully used fwd app to discover hosts " )
+        getDataResult = main.TRUE
+    else:
+        main.log.info( "Failed to use fwd app to discover hosts " )
+        getDataResult = main.FALSE
+
+    print main.hostsData
+
+    return getDataResult
+
+def checkTopology( main, expectedLink ):
+    statusResult = main.TRUE
+    # Check onos topology
+    main.log.info( itemName + ": Checking ONOS topology " )
+
+    for i in range( main.numCtrls ):
+        topologyResult = main.CLIs[ i ].topology()
+        statusResult = main.ONOSbench.checkStatus( topologyResult,
+                                                   main.numSwitch,
+                                                   expectedLink )\
+                       and statusResult
+    if not statusResult:
+        main.log.error( itemName + ": Topology mismatch" )
+    else:
+        main.log.info( itemName + ": Topology match" )
+    return statusResult
+
+def checkIntentState( main, intentsId ):
+    """
+        This function will check intent state to make sure all the intents
+        are in INSTALLED state
+    """
+
+    intentResult = main.TRUE
+    results = []
+
+    main.log.info( itemName + ": Checking intents state" )
+    # First check of intents
+    for i in range( main.numCtrls ):
+        tempResult = main.CLIs[ i ].checkIntentState( intentsId=intentsId )
+        results.append( tempResult )
+
+    expectedState = [ 'INSTALLED', 'INSTALLING' ]
+
+    if all( result == main.TRUE for result in results ):
+        main.log.info( itemName + ": Intents are installed correctly" )
+    else:
+        # Wait for at least 5 second before checking the intents again
+        time.sleep( 5 )
+        results = []
+        # Second check of intents since some of the intents may be in
+        # INSTALLING state, they should be in INSTALLED at this time
+        for i in range( main.numCtrls ):
+            tempResult = main.CLIs[ i ].checkIntentState(
+                                                        intentsId=intentsId )
+            results.append( tempResult )
+        if all( result == main.TRUE for result in results ):
+            main.log.info( itemName + ": Intents are installed correctly" )
+        else:
+            main.log.error( itemName + ": Intents are NOT installed correctly" )
+            intentResult = main.FALSE
+
+    return intentResult
+
+def checkFlowsState( main ):
+
+    main.log.info( itemName + ": Check flows state" )
+    checkFlowsResult = main.CLIs[ 0 ].checkFlowsState()
+    return checkFlowsResult
+
+def link( main, sw1, sw2, option):
+
+    # link down
+    main.log.info( itemName + ": Bring link " + option + "between " +
+                       sw1 + " and " + sw2 )
+    linkResult = main.Mininet1.link( end1=sw1, end2=sw2, option=option )
+    return linkResult
+
+def removeAllIntents( main ):
+    """
+        Remove all intents in the intentsId
+    """
+
+    onosSummary = []
+    removeIntentResult = main.TRUE
+    # Remove intents
+    removeIntentResult = main.CLIs[ 0 ].removeAllIntents( )
+
+    if removeIntentResult:
+        main.log.info( itemName + ": There are no more intents remaining, " +
+                       "successfully removed all the intents." )
+
+    return removeIntentResult
+
+def checkFlowsCount( main ):
+    """
+        Check flows count in each node
+    """
+
+    flowsCount = []
+    main.log.info( itemName + ": Checking flows count in each ONOS node" )
+    for i in range( main.numCtrls ):
+        flowsCount.append( len( json.loads( main.CLIs[ i ].flows() ) ) )
+
+    if flowsCount:
+        if all( flows==flowsCount[ 0 ] for flows in flowsCount ):
+            main.log.info( itemName + ": There are " + str( flowsCount[ 0 ] ) +
+                           " flows in all ONOS node" )
+        else:
+            for i in range( main.numCtrls ):
+                main.log.debug( itemName + ": ONOS node " + str( i + 1 ) +
+                                " has " + flowsCount[ i ] + " flows" )
+    else:
+        main.log.error( "Checking flows count failed, check summary command" )
+        return main.FALSE
+
+    return main.TRUE
+
diff --git a/TestON/tests/FUNCintentRest/Dependency/newFuncTopo.py b/TestON/tests/FUNCintentRest/Dependency/newFuncTopo.py
new file mode 100755
index 0000000..5552aa9
--- /dev/null
+++ b/TestON/tests/FUNCintentRest/Dependency/newFuncTopo.py
@@ -0,0 +1,148 @@
+#!/usr/bin/python
+
+"""
+Custom topology for Mininet
+"""
+from mininet.topo import Topo
+from mininet.net import Mininet
+from mininet.node import Host, RemoteController
+from mininet.node import Node
+from mininet.node import CPULimitedHost
+from mininet.link import TCLink
+from mininet.cli import CLI
+from mininet.log import setLogLevel
+from mininet.util import dumpNodeConnections
+from mininet.node import ( UserSwitch, OVSSwitch, IVSSwitch )
+
+class VLANHost( Host ):
+    def config( self, vlan=100, **params ):
+		r = super( Host, self ).config( **params )
+		intf = self.defaultIntf()
+		self.cmd( 'ifconfig %s inet 0' % intf )
+                self.cmd( 'vconfig add %s %d' % ( intf, vlan ) )
+		self.cmd( 'ifconfig %s.%d inet %s' % ( intf, vlan, params['ip'] ) )
+		newName = '%s.%d' % ( intf, vlan )
+		intf.name = newName
+		self.nameToIntf[ newName ] = intf
+		return r
+
+class IPv6Host( Host ):
+    def config( self, v6Addr='1000:1/64', **params ):
+		r = super( Host, self ).config( **params )
+		intf = self.defaultIntf()
+		self.cmd( 'ifconfig %s inet 0' % intf )
+		self.cmd( 'ip -6 addr add %s dev %s' % ( v6Addr, intf ) )
+		return r
+
+class dualStackHost( Host ):
+    def config( self, v6Addr='2000:1/64', **params ):
+		r = super( Host, self ).config( **params )
+		intf = self.defaultIntf()
+		self.cmd( 'ip -6 addr add %s dev %s' % ( v6Addr, intf ) )
+		return r
+
+class MyTopo( Topo ):
+
+	def __init__( self ):
+                # Initialize topology
+		Topo.__init__( self )
+		# Switch S5 Hosts
+		host1=self.addHost( 'h1', ip='10.1.0.2/24' )
+		host2=self.addHost( 'h2', cls=IPv6Host, v6Addr='1000::2/64' )
+		host3=self.addHost( 'h3', ip='10.1.0.3/24', cls=dualStackHost, v6Addr='2000::2/64' )
+		#VLAN hosts
+		host4=self.addHost( 'h4', ip='100.1.0.2/24', cls=VLANHost, vlan=100 )
+		host5=self.addHost( 'h5', ip='200.1.0.2/24', cls=VLANHost, vlan=200 )
+		#VPN-1 and VPN-2 Hosts
+		host6=self.addHost( 'h6', ip='11.1.0.2/24' )
+		host7=self.addHost( 'h7', ip='12.1.0.2/24' )
+		#Multicast Sender
+		host8=self.addHost( 'h8', ip='10.1.0.4/24' )
+
+		# Switch S6 Hosts
+		host9=self.addHost( 'h9', ip='10.1.0.5/24' )
+		host10=self.addHost( 'h10', cls=IPv6Host, v6Addr='1000::3/64' )
+		host11=self.addHost( 'h11', ip='10.1.0.6/24', cls=dualStackHost, v6Addr='2000::3/64' )
+		#VLAN hosts
+		host12=self.addHost( 'h12', ip='100.1.0.3/24', cls=VLANHost, vlan=100 )
+		host13=self.addHost( 'h13', ip='200.1.0.3/24', cls=VLANHost, vlan=200 )
+		#VPN-1 and VPN-2 Hosts
+		host14=self.addHost( 'h14', ip='11.1.0.3/24' )
+		host15=self.addHost( 'h15', ip='12.1.0.3/24' )
+		#Multicast Receiver
+		host16=self.addHost( 'h16', ip='10.1.0.7/24' )
+
+		# Switch S7 Hosts
+		host17=self.addHost( 'h17', ip='10.1.0.8/24' )
+		host18=self.addHost( 'h18', cls=IPv6Host, v6Addr='1000::4/64' )
+		host19=self.addHost( 'h19', ip='10.1.0.9/24', cls=dualStackHost, v6Addr='2000::4/64' )
+		#VLAN hosts
+		host20=self.addHost( 'h20', ip='100.1.0.4/24', cls=VLANHost, vlan=100 )
+		host21=self.addHost( 'h21', ip='200.1.0.4/24', cls=VLANHost, vlan=200 )
+		#VPN-1 and VPN-2 Hosts
+		host22=self.addHost( 'h22', ip='11.1.0.4/24' )
+		host23=self.addHost( 'h23', ip='12.1.0.4/24' )
+		#Multicast Receiver
+		host24=self.addHost( 'h24', ip='10.1.0.10/24' )
+
+		s1 = self.addSwitch( 's1' )
+		s2 = self.addSwitch( 's2' )
+		s3 = self.addSwitch( 's3' )
+		s4 = self.addSwitch( 's4' )
+		s5 = self.addSwitch( 's5' )
+		s6 = self.addSwitch( 's6' )
+		s7 = self.addSwitch( 's7' )
+
+		self.addLink(s5,host1)
+		self.addLink(s5,host2)
+		self.addLink(s5,host3)
+		self.addLink(s5,host4)
+		self.addLink(s5,host5)
+		self.addLink(s5,host6)
+		self.addLink(s5,host7)
+		self.addLink(s5,host8)
+
+		self.addLink(s6,host9)
+		self.addLink(s6,host10)
+		self.addLink(s6,host11)
+		self.addLink(s6,host12)
+		self.addLink(s6,host13)
+		self.addLink(s6,host14)
+		self.addLink(s6,host15)
+		self.addLink(s6,host16)
+
+		self.addLink(s7,host17)
+		self.addLink(s7,host18)
+		self.addLink(s7,host19)
+		self.addLink(s7,host20)
+		self.addLink(s7,host21)
+		self.addLink(s7,host22)
+		self.addLink(s7,host23)
+		self.addLink(s7,host24)
+
+		self.addLink(s1,s2)
+                self.addLink(s1,s3)
+		self.addLink(s1,s4)
+		self.addLink(s1,s5)
+		self.addLink(s2,s3)
+		self.addLink(s2,s5)
+		self.addLink(s2,s6)
+		self.addLink(s3,s4)
+		self.addLink(s3,s6)
+		self.addLink(s4,s7)
+		topos = { 'mytopo': ( lambda: MyTopo() ) }
+
+# HERE THE CODE DEFINITION OF THE TOPOLOGY ENDS
+
+def setupNetwork():
+    "Create network"
+    topo = MyTopo()
+    network = Mininet(topo=topo, autoSetMacs=True, controller=None)
+    network.start()
+    CLI( network )
+    network.stop()
+
+if __name__ == '__main__':
+    setLogLevel('info')
+    #setLogLevel('debug')
+    setupNetwork()
diff --git a/TestON/tests/FUNCintentRest/Dependency/startUp.py b/TestON/tests/FUNCintentRest/Dependency/startUp.py
new file mode 100644
index 0000000..bf2a2b6
--- /dev/null
+++ b/TestON/tests/FUNCintentRest/Dependency/startUp.py
@@ -0,0 +1,38 @@
+"""
+    This wrapper function is use for starting up onos instance
+"""
+
+import time
+import os
+import json
+
+def onosBuild( main, gitBranch ):
+    """
+        This includes pulling ONOS and building it using maven install
+    """
+
+    buildResult = main.FALSE
+
+    # Git checkout a branch of ONOS
+    checkOutResult = main.ONOSbench.gitCheckout( gitBranch )
+    # Does the git pull on the branch that was checked out
+    if not checkOutResult:
+        main.log.warn( "Failed to checked out " + gitBranch +
+                                           " branch")
+    else:
+        main.log.info( "Successfully checked out " + gitBranch +
+                                           " branch")
+    gitPullResult = main.ONOSbench.gitPull()
+    if gitPullResult == main.ERROR:
+        main.log.error( "Error pulling git branch" )
+    else:
+        main.log.info( "Successfully pulled " + gitBranch + " branch" )
+
+    # Maven clean install
+    buildResult = main.ONOSbench.cleanInstall()
+
+    return buildResult
+
+
+
+
diff --git a/TestON/tests/FUNCintentRest/Dependency/topo.py b/TestON/tests/FUNCintentRest/Dependency/topo.py
new file mode 100644
index 0000000..b44e3fc
--- /dev/null
+++ b/TestON/tests/FUNCintentRest/Dependency/topo.py
@@ -0,0 +1,100 @@
+"""
+    These functions can be used for topology comparisons
+"""
+
+import time
+import os
+import json
+
+def getAllDevices( main ):
+    """
+        Return a list containing the devices output from each ONOS node
+    """
+    devices = []
+    threads = []
+    for i in range( main.numCtrls ):
+        t = main.Thread( target=main.CLIs[i].devices,
+                         name="devices-" + str( i ),
+                         args=[ ] )
+        threads.append( t )
+        t.start()
+
+    for t in threads:
+        t.join()
+        devices.append( t.result )
+    return devices
+
+def getAllHosts( main ):
+    """
+        Return a list containing the hosts output from each ONOS node
+    """
+    hosts = []
+    ipResult = main.TRUE
+    threads = []
+    for i in range( main.numCtrls ):
+        t = main.Thread( target=main.CLIs[i].hosts,
+                         name="hosts-" + str( i ),
+                         args=[ ] )
+        threads.append( t )
+        t.start()
+
+    for t in threads:
+        t.join()
+        hosts.append( t.result )
+    return hosts
+
+def getAllPorts( main ):
+    """
+        Return a list containing the ports output from each ONOS node
+    """
+    ports = []
+    threads = []
+    for i in range( main.numCtrls ):
+        t = main.Thread( target=main.CLIs[i].ports,
+                         name="ports-" + str( i ),
+                         args=[ ] )
+        threads.append( t )
+        t.start()
+
+    for t in threads:
+        t.join()
+        ports.append( t.result )
+    return ports
+
+def getAllLinks( main ):
+    """
+        Return a list containing the links output from each ONOS node
+    """
+    links = []
+    threads = []
+    for i in range( main.numCtrls ):
+        t = main.Thread( target=main.CLIs[i].links,
+                         name="links-" + str( i ),
+                         args=[ ] )
+        threads.append( t )
+        t.start()
+
+    for t in threads:
+        t.join()
+        links.append( t.result )
+    return links
+
+def getAllClusters( main ):
+    """
+        Return a list containing the clusters output from each ONOS node
+    """
+    clusters = []
+    threads = []
+    for i in range( main.numCtrls ):
+        t = main.Thread( target=main.CLIs[i].clusters,
+                         name="clusters-" + str( i ),
+                         args=[ ] )
+        threads.append( t )
+        t.start()
+
+    for t in threads:
+        t.join()
+        clusters.append( t.result )
+    return clusters
+
+
diff --git a/TestON/tests/FUNCintentRest/FUNCintentRest.params b/TestON/tests/FUNCintentRest/FUNCintentRest.params
new file mode 100644
index 0000000..edb8c85
--- /dev/null
+++ b/TestON/tests/FUNCintentRest/FUNCintentRest.params
@@ -0,0 +1,58 @@
+<PARAMS>
+    # CASE - Description
+    # 1 - Variable initialization and optional pull and build ONOS package
+    # 2 - Install ONOS
+    # 9 - Report logs
+    # 11 - Start Mininet
+    # 12 - Assign switch to controller
+    # 13 - Create a data of hosts information
+    # 14 - Stop Mininet
+    # 1000 - Test host intents
+    # 2000 - Test point intents
+    # 3000 - Test single to multi point intents
+    # 4000 - Test multi to single point intents
+
+    <testcases>1,2,10,12,13,1000,2000</testcases>
+
+    <SCALE>
+        <size>1,3</size>
+    </SCALE>
+
+    <DEPENDENCY>
+        <path>/tests/FUNCintentRest/Dependency/</path>
+        <wrapper1>startUp</wrapper1>
+        <wrapper2>FuncIntentFunction</wrapper2>
+        <wrapper3>topo</wrapper3>
+        <topology>newFuncTopo.py</topology>
+    </DEPENDENCY>
+
+    <ENV>
+        <cellApps>drivers,openflow,proxyarp,mobility</cellApps>
+    </ENV>
+    <GIT>
+        <pull>False</pull>
+        <branch>master</branch>
+    </GIT>
+
+    <SLEEP>
+        <startup>15</startup>
+        <reroute>5</reroute>
+        <checkintent>5</checkintent>
+        <fwd>5</fwd>
+        <hostintent>3</hostintent>
+    </SLEEP>
+
+    <MININET>
+        <switch>7</switch>
+        <links>20</links>
+    </MININET>
+
+    # Intent tests params
+    <SDNIP>
+        <tcpProto>6</tcpProto>
+        <icmpProto>1</icmpProto>
+        <srcPort>5001</srcPort>
+        <dstPort>5001</dstPort>
+    </SDNIP>
+
+</PARAMS>
diff --git a/TestON/tests/FUNCintentRest/FUNCintentRest.py b/TestON/tests/FUNCintentRest/FUNCintentRest.py
new file mode 100644
index 0000000..ef204e9
--- /dev/null
+++ b/TestON/tests/FUNCintentRest/FUNCintentRest.py
@@ -0,0 +1,1196 @@
+
+# Testing the basic intent functionality of ONOS
+
+import time
+import json
+
+class FUNCintentRest:
+
+    def __init__( self ):
+        self.default = ''
+
+    def CASE1( self, main ):
+        import time
+        import os
+        import imp
+
+        """
+        - Construct tests variables
+        - GIT ( optional )
+            - Checkout ONOS master branch
+            - Pull latest ONOS code
+        - Building ONOS ( optional )
+            - Install ONOS package
+            - Build ONOS package
+        """
+
+        main.case( "Constructing test variables and building ONOS package" )
+        main.step( "Constructing test variables" )
+        main.caseExplanation = "This test case is mainly for loading " +\
+                               "from params file, and pull and build the " +\
+                               " latest ONOS package"
+        stepResult = main.FALSE
+
+        # Test variables
+        try:
+            main.testOnDirectory = os.path.dirname( os.getcwd ( ) )
+            main.apps = main.params[ 'ENV' ][ 'cellApps' ]
+            gitBranch = main.params[ 'GIT' ][ 'branch' ]
+            main.dependencyPath = main.testOnDirectory + \
+                                  main.params[ 'DEPENDENCY' ][ 'path' ]
+            main.topology = main.params[ 'DEPENDENCY' ][ 'topology' ]
+            main.scale = ( main.params[ 'SCALE' ][ 'size' ] ).split( "," )
+            if main.ONOSbench.maxNodes:
+                main.maxNodes = int( main.ONOSbench.maxNodes )
+            else:
+                main.maxNodes = 0
+            wrapperFile1 = main.params[ 'DEPENDENCY' ][ 'wrapper1' ]
+            wrapperFile2 = main.params[ 'DEPENDENCY' ][ 'wrapper2' ]
+            wrapperFile3 = main.params[ 'DEPENDENCY' ][ 'wrapper3' ]
+            main.startUpSleep = int( main.params[ 'SLEEP' ][ 'startup' ] )
+            main.checkIntentSleep = int( main.params[ 'SLEEP' ]\
+                    [ 'checkintent' ] )
+            main.rerouteSleep = int( main.params[ 'SLEEP' ][ 'reroute' ] )
+            main.fwdSleep = int( main.params[ 'SLEEP' ][ 'fwd' ] )
+            main.hostIntentSleep = int( main.params[ 'SLEEP' ][ 'hostintent' ] )
+            gitPull = main.params[ 'GIT' ][ 'pull' ]
+            main.numSwitch = int( main.params[ 'MININET' ][ 'switch' ] )
+            main.numLinks = int( main.params[ 'MININET' ][ 'links' ] )
+            main.cellData = {} # for creating cell file
+            main.hostsData = {}
+            main.CLIs = []
+            main.ONOSip = []
+
+            main.ONOSip = main.ONOSbench.getOnosIps()
+
+            # Assigning ONOS cli handles to a list
+            for i in range( 1,  main.maxNodes + 1 ):
+                main.CLIs.append( getattr( main, 'ONOSrest' + str( i ) ) )
+
+            # -- INIT SECTION, ONLY RUNS ONCE -- #
+            main.startUp = imp.load_source( wrapperFile1,
+                                            main.dependencyPath +
+                                            wrapperFile1 +
+                                            ".py" )
+
+            main.intentFunction = imp.load_source( wrapperFile2,
+                                            main.dependencyPath +
+                                            wrapperFile2 +
+                                            ".py" )
+
+            main.topo = imp.load_source( wrapperFile3,
+                                         main.dependencyPath +
+                                         wrapperFile3 +
+                                         ".py" )
+
+            copyResult = main.ONOSbench.copyMininetFile( main.topology,
+                                                         main.dependencyPath,
+                                                         main.Mininet1.user_name,
+                                                         main.Mininet1.ip_address )
+            if main.CLIs:
+                stepResult = main.TRUE
+            else:
+                main.log.error( "Did not properly created list of ONOS CLI handle" )
+                stepResult = main.FALSE
+        except Exception as e:
+            main.log.exception(e)
+            main.cleanup()
+            main.exit()
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully construct " +
+                                        "test variables ",
+                                 onfail="Failed to construct test variables" )
+
+        if gitPull == 'True':
+            main.step( "Building ONOS in " + gitBranch + " branch" )
+            onosBuildResult = main.startUp.onosBuild( main, gitBranch )
+            stepResult = onosBuildResult
+            utilities.assert_equals( expect=main.TRUE,
+                                     actual=stepResult,
+                                     onpass="Successfully compiled " +
+                                            "latest ONOS",
+                                     onfail="Failed to compile " +
+                                            "latest ONOS" )
+        else:
+            main.log.warn( "Did not pull new code so skipping mvn " +
+                           "clean install" )
+        main.ONOSbench.getVersion( report=True )
+
+    def CASE2( self, main ):
+        """
+        - Set up cell
+            - Create cell file
+            - Set cell file
+            - Verify cell file
+        - Kill ONOS process
+        - Uninstall ONOS cluster
+        - Verify ONOS start up
+        - Install ONOS cluster
+        - Connect to cli
+        """
+
+        # main.scale[ 0 ] determines the current number of ONOS controller
+        main.numCtrls = int( main.scale[ 0 ] )
+
+        main.case( "Starting up " + str( main.numCtrls ) +
+                   " node(s) ONOS cluster" )
+        main.caseExplanation = "Set up ONOS with " + str( main.numCtrls ) +\
+                                " node(s) ONOS cluster"
+
+
+
+        #kill off all onos processes
+        main.log.info( "Safety check, killing all ONOS processes" +
+                       " before initiating enviornment setup" )
+
+        for i in range( main.maxNodes ):
+            main.ONOSbench.onosDie( main.ONOSip[ i ] )
+
+        print "NODE COUNT = ", main.numCtrls
+
+        tempOnosIp = []
+        for i in range( main.numCtrls ):
+            tempOnosIp.append( main.ONOSip[i] )
+
+        main.ONOSbench.createCellFile( main.ONOSbench.ip_address,
+                                       "temp", main.Mininet1.ip_address,
+                                       main.apps, tempOnosIp )
+
+        main.step( "Apply cell to environment" )
+        cellResult = main.ONOSbench.setCell( "temp" )
+        verifyResult = main.ONOSbench.verifyCell()
+        stepResult = cellResult and verifyResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully applied cell to " + \
+                                        "environment",
+                                 onfail="Failed to apply cell to environment " )
+
+        main.step( "Creating ONOS package" )
+        packageResult = main.ONOSbench.onosPackage()
+        stepResult = packageResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully created ONOS package",
+                                 onfail="Failed to create ONOS package" )
+
+        time.sleep( main.startUpSleep )
+        main.step( "Uninstalling ONOS package" )
+        onosUninstallResult = main.TRUE
+        for i in range( main.numCtrls ):
+            onosUninstallResult = onosUninstallResult and \
+                    main.ONOSbench.onosUninstall( nodeIp=main.ONOSip[ i ] )
+        stepResult = onosUninstallResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully uninstalled ONOS package",
+                                 onfail="Failed to uninstall ONOS package" )
+
+        time.sleep( main.startUpSleep )
+        main.step( "Installing ONOS package" )
+        onosInstallResult = main.TRUE
+        for i in range( main.numCtrls ):
+            onosInstallResult = onosInstallResult and \
+                    main.ONOSbench.onosInstall( node=main.ONOSip[ i ] )
+        stepResult = onosInstallResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully installed ONOS package",
+                                 onfail="Failed to install ONOS package" )
+
+        time.sleep( main.startUpSleep )
+        main.step( "Starting ONOS service" )
+        stopResult = main.TRUE
+        startResult = main.TRUE
+        onosIsUp = main.TRUE
+
+        for i in range( main.numCtrls ):
+            onosIsUp = onosIsUp and main.ONOSbench.isup( main.ONOSip[ i ] )
+        if onosIsUp == main.TRUE:
+            main.log.report( "ONOS instance is up and ready" )
+        else:
+            main.log.report( "ONOS instance may not be up, stop and " +
+                             "start ONOS again " )
+            for i in range( main.numCtrls ):
+                stopResult = stopResult and \
+                        main.ONOSbench.onosStop( main.ONOSip[ i ] )
+            for i in range( main.numCtrls ):
+                startResult = startResult and \
+                        main.ONOSbench.onosStart( main.ONOSip[ i ] )
+        stepResult = onosIsUp and stopResult and startResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="ONOS service is ready",
+                                 onfail="ONOS service did not start properly" )
+
+        # Remove the first element in main.scale list
+        main.scale.remove( main.scale[ 0 ] )
+
+    def CASE8( self, main ):
+        """
+        Compare Topo
+        """
+        import json
+
+        main.case( "Compare ONOS Topology view to Mininet topology" )
+        main.caseExplanation = "Compare topology elements between Mininet" +\
+                                " and ONOS"
+
+        main.step( "Gathering topology information" )
+        # TODO: add a paramaterized sleep here
+        devicesResults = main.TRUE
+        linksResults = main.TRUE
+        hostsResults = main.TRUE
+        devices = main.topo.getAllDevices( main )
+        hosts = main.topo.getAllHosts( main )
+        ports = main.topo.getAllPorts( main )
+        links = main.topo.getAllLinks( main )
+        clusters = main.topo.getAllClusters( main )
+
+        mnSwitches = main.Mininet1.getSwitches()
+        mnLinks = main.Mininet1.getLinks()
+        mnHosts = main.Mininet1.getHosts()
+
+        main.step( "Conmparing MN topology to ONOS topology" )
+        for controller in range( main.numCtrls ):
+            controllerStr = str( controller + 1 )
+            if devices[ controller ] and ports[ controller ] and\
+                "Error" not in devices[ controller ] and\
+                "Error" not in ports[ controller ]:
+
+                currentDevicesResult = main.Mininet1.compareSwitches(
+                        mnSwitches,
+                        json.loads( devices[ controller ] ),
+                        json.loads( ports[ controller ] ) )
+            else:
+                currentDevicesResult = main.FALSE
+            utilities.assert_equals( expect=main.TRUE,
+                                     actual=currentDevicesResult,
+                                     onpass="ONOS" + controllerStr +
+                                     " Switches view is correct",
+                                     onfail="ONOS" + controllerStr +
+                                     " Switches view is incorrect" )
+
+            if links[ controller ] and "Error" not in links[ controller ]:
+                currentLinksResult = main.Mininet1.compareLinks(
+                        mnSwitches, mnLinks,
+                        json.loads( links[ controller ] ) )
+            else:
+                currentLinksResult = main.FALSE
+            utilities.assert_equals( expect=main.TRUE,
+                                     actual=currentLinksResult,
+                                     onpass="ONOS" + controllerStr +
+                                     " links view is correct",
+                                     onfail="ONOS" + controllerStr +
+                                     " links view is incorrect" )
+
+            if hosts[ controller ] or "Error" not in hosts[ controller ]:
+                currentHostsResult = main.Mininet1.compareHosts(
+                        mnHosts,
+                        json.loads( hosts[ controller ] ) )
+            else:
+                currentHostsResult = main.FALSE
+            utilities.assert_equals( expect=main.TRUE,
+                                     actual=currentHostsResult,
+                                     onpass="ONOS" + controllerStr +
+                                     " hosts exist in Mininet",
+                                     onfail="ONOS" + controllerStr +
+                                     " hosts don't match Mininet" )
+
+    def CASE9( self, main ):
+        '''
+            Report errors/warnings/exceptions
+        '''
+        main.log.info( "Error report: \n" )
+        main.ONOSbench.logReport( globalONOSip[0],
+                [ "INFO", "FOLLOWER", "WARN", "flow", "ERROR" , "Except" ],
+                "s" )
+        #main.ONOSbench.logReport( globalONOSip[1], [ "INFO" ], "d" )
+
+    def CASE10( self, main ):
+        """
+            Start Mininet topology with OF 1.0 switches
+        """
+        main.OFProtocol = "1.0"
+        main.log.report( "Start Mininet topology with OF 1.0 switches" )
+        main.case( "Start Mininet topology with OF 1.0 switches" )
+        main.caseExplanation = "Start mininet topology with OF 1.0 " +\
+                                "switches to test intents, exits out if " +\
+                                "topology did not start correctly"
+
+        main.step( "Starting Mininet topology with OF 1.0 switches" )
+        args = "--switch ovs,protocols=OpenFlow10"
+        topoResult = main.Mininet1.startNet( topoFile=main.dependencyPath +
+                                                      main.topology,
+                                             args=args )
+        stepResult = topoResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully loaded topology",
+                                 onfail="Failed to load topology" )
+        # Exit if topology did not load properly
+        if not topoResult:
+            main.cleanup()
+            main.exit()
+
+    def CASE11( self, main ):
+        """
+            Start Mininet topology with OF 1.3 switches
+        """
+        main.OFProtocol = "1.3"
+        main.log.report( "Start Mininet topology with OF 1.3 switches" )
+        main.case( "Start Mininet topology with OF 1.3 switches" )
+        main.caseExplanation = "Start mininet topology with OF 1.3 " +\
+                                "switches to test intents, exits out if " +\
+                                "topology did not start correctly"
+
+        main.step( "Starting Mininet topology with OF 1.3 switches" )
+        args = "--switch ovs,protocols=OpenFlow13"
+        topoResult = main.Mininet1.startNet( topoFile=main.dependencyPath +
+                                                      main.topology,
+                                             args=args )
+        stepResult = topoResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully loaded topology",
+                                 onfail="Failed to load topology" )
+        # Exit if topology did not load properly
+        if not topoResult:
+            main.cleanup()
+            main.exit()
+
+    def CASE12( self, main ):
+        """
+            Assign mastership to controllers
+        """
+        import re
+
+        main.case( "Assign switches to controllers" )
+        main.step( "Assigning switches to controllers" )
+        main.caseExplanation = "Assign OF " + main.OFProtocol +\
+                                " switches to ONOS nodes"
+
+        assignResult = main.TRUE
+        switchList = []
+
+        # Creates a list switch name, use getSwitch() function later...
+        for i in range( 1, ( main.numSwitch + 1 ) ):
+            switchList.append( 's' + str( i ) )
+
+        tempONOSip = []
+        for i in range( main.numCtrls ):
+            tempONOSip.append( main.ONOSip[ i ] )
+
+        assignResult = main.Mininet1.assignSwController( sw=switchList,
+                                                         ip=tempONOSip,
+                                                         port='6633' )
+        if not assignResult:
+            main.cleanup()
+            main.exit()
+
+        for i in range( 1, ( main.numSwitch + 1 ) ):
+            response = main.Mininet1.getSwController( "s" + str( i ) )
+            print( "Response is " + str( response ) )
+            if re.search( "tcp:" + main.ONOSip[ 0 ], response ):
+                assignResult = assignResult and main.TRUE
+            else:
+                assignResult = main.FALSE
+        stepResult = assignResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully assigned switches" +
+                                        "to controller",
+                                 onfail="Failed to assign switches to " +
+                                        "controller" )
+    def CASE13( self, main ):
+        """
+            Discover all hosts and store its data to a dictionary
+        """
+        main.case( "Discover all hosts" )
+
+        stepResult = main.TRUE
+        main.step( "Discover all hosts using pingall " )
+        stepResult = main.intentFunction.getHostsData( main )
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully discovered hosts",
+                                 onfail="Failed to discover hosts" )
+
+    def CASE14( self, main ):
+        """
+            Stop mininet
+        """
+        main.log.report( "Stop Mininet topology" )
+        main.case( "Stop Mininet topology" )
+        main.caseExplanation = "Stopping the current mininet topology " +\
+                                "to start up fresh"
+
+        main.step( "Stopping Mininet Topology" )
+        topoResult = main.Mininet1.stopNet( )
+        stepResult = topoResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully stop mininet",
+                                 onfail="Failed to stop mininet" )
+        # Exit if topology did not load properly
+        if not topoResult:
+            main.cleanup()
+            main.exit()
+
+    def CASE1000( self, main ):
+        """
+            Add host intents between 2 host:
+                - Discover hosts
+                - Add host intents
+                - Check intents
+                - Verify flows
+                - Ping hosts
+                - Reroute
+                    - Link down
+                    - Verify flows
+                    - Check topology
+                    - Ping hosts
+                    - Link up
+                    - Verify flows
+                    - Check topology
+                    - Ping hosts
+                - Remove intents
+        """
+        import time
+        import json
+        import re
+
+        # Assert variables - These variable's name|format must be followed
+        # if you want to use the wrapper function
+        assert main, "There is no main"
+        assert main.CLIs, "There is no main.CLIs"
+        assert main.Mininet1, "Mininet handle should be named Mininet1"
+        assert main.numSwitch, "Placed the total number of switch topology in \
+                                main.numSwitch"
+
+        main.case( "Host Intents Test - " + str( main.numCtrls ) +
+                   " NODE(S) - OF " + main.OFProtocol )
+        main.caseExplanation = "This test case tests Host intents using " +\
+                                str( main.numCtrls ) + " node(s) cluster;\n" +\
+                                "Different type of hosts will be tested in " +\
+                                "each step such as IPV4, Dual stack, VLAN " +\
+                                "etc;\nThe test will use OF " + main.OFProtocol\
+                                + " OVS running in Mininet"
+
+        main.step( "IPV4: Add host intents between h1 and h9" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.hostIntent( main,
+                                              onosNode='0',
+                                              name='IPV4',
+                                              host1='h1',
+                                              host2='h9',
+                                              host1Id='00:00:00:00:00:01/-1',
+                                              host2Id='00:00:00:00:00:09/-1',
+                                              sw1='s5',
+                                              sw2='s2',
+                                              expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="IPV4: Host intent test successful " +
+                                        "between two IPV4 hosts",
+                                 onfail="IPV4: Host intent test failed " +
+                                        "between two IPV4 hosts")
+
+        main.step( "DUALSTACK1: Add host intents between h3 and h11" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.hostIntent( main,
+                                              name='DUALSTACK',
+                                              host1='h3',
+                                              host2='h11',
+                                              host1Id='00:00:00:00:00:03/-1',
+                                              host2Id='00:00:00:00:00:0B/-1',
+                                              sw1='s5',
+                                              sw2='s2',
+                                              expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="DUALSTACK: Host intent test " +
+                                        "successful between two " +
+                                        "dual stack host using IPV4",
+                                 onfail="DUALSTACK: Host intent test " +
+                                        "failed between two" +
+                                        "dual stack host using IPV4" )
+
+
+        main.step( "DUALSTACK2: Add host intents between h1 and h11" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.hostIntent( main,
+                                              name='DUALSTACK2',
+                                              host1='h1',
+                                              host2='h11',
+                                              sw1='s5',
+                                              sw2='s2',
+                                              expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="DUALSTACK2: Host intent test " +
+                                        "successful between two " +
+                                        "dual stack host using IPV4",
+                                 onfail="DUALSTACK2: Host intent test " +
+                                        "failed between two" +
+                                        "dual stack host using IPV4" )
+
+        main.step( "1HOP: Add host intents between h1 and h3" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.hostIntent( main,
+                                              name='1HOP',
+                                              host1='h1',
+                                              host2='h3' )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="1HOP: Host intent test " +
+                                        "successful between two " +
+                                        "host using IPV4 in the same switch",
+                                 onfail="1HOP: Host intent test " +
+                                        "failed between two" +
+                                        "host using IPV4 in the same switch" )
+
+        main.step( "VLAN1: Add vlan host intents between h4 and h12" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.hostIntent( main,
+                                              name='VLAN1',
+                                              host1='h4',
+                                              host2='h12',
+                                              host1Id='00:00:00:00:00:04/100',
+                                              host2Id='00:00:00:00:00:0C/100',
+                                              sw1='s5',
+                                              sw2='s2',
+                                              expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="VLAN1: Host intent test " +
+                                        "successful between two " +
+                                        "host using IPV4 in the same VLAN",
+                                 onfail="VLAN1: Host intent test " +
+                                        "failed between two" +
+                                        "host using IPV4 in the same VLAN" )
+
+        main.step( "VLAN2: Add inter vlan host intents between h13 and h20" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.hostIntent( main,
+                                              name='VLAN2',
+                                              host1='h13',
+                                              host2='h20' )
+
+        utilities.assert_equals( expect=main.FALSE,
+                                 actual=stepResult,
+                                 onpass="VLAN2: Host intent negative test " +
+                                        "successful between two " +
+                                        "host using IPV4 in different VLAN",
+                                 onfail="VLAN2: Host intent negative test " +
+                                        "failed between two" +
+                                        "host using IPV4 in different VLAN" )
+
+
+    def CASE2000( self, main ):
+        """
+            Add point intents between 2 hosts:
+                - Get device ids | ports
+                - Add point intents
+                - Check intents
+                - Verify flows
+                - Ping hosts
+                - Reroute
+                    - Link down
+                    - Verify flows
+                    - Check topology
+                    - Ping hosts
+                    - Link up
+                    - Verify flows
+                    - Check topology
+                    - Ping hosts
+                - Remove intents
+        """
+        import time
+        import json
+        import re
+
+        # Assert variables - These variable's name|format must be followed
+        # if you want to use the wrapper function
+        assert main, "There is no main"
+        assert main.CLIs, "There is no main.CLIs"
+        assert main.Mininet1, "Mininet handle should be named Mininet1"
+        assert main.numSwitch, "Placed the total number of switch topology in \
+                                main.numSwitch"
+
+        main.case( "Point Intents Test - " + str( main.numCtrls ) +
+                   " NODE(S) - OF " + main.OFProtocol )
+        main.caseExplanation = "This test case will test point to point" +\
+                               " intents using " + str( main.numCtrls ) +\
+                               " node(s) cluster;\n" +\
+                               "Different type of hosts will be tested in " +\
+                               "each step such as IPV4, Dual stack, VLAN etc" +\
+                               ";\nThe test will use OF " + main.OFProtocol +\
+                               " OVS running in Mininet"
+
+        # No option point intents
+        main.step( "NOOPTION: Add point intents between h1 and h9" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.pointIntent(
+                                       main,
+                                       name="NOOPTION",
+                                       host1="h1",
+                                       host2="h9",
+                                       deviceId1="of:0000000000000005/1",
+                                       deviceId2="of:0000000000000006/1",
+                                       sw1="s5",
+                                       sw2="s2",
+                                       expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="NOOPTION: Point intent test " +
+                                        "successful using no match action",
+                                 onfail="NOOPTION: Point intent test " +
+                                        "failed using no match action" )
+
+        stepResult = main.TRUE
+        main.step( "IPV4: Add point intents between h1 and h9" )
+        stepResult = main.intentFunction.pointIntent(
+                                       main,
+                                       name="IPV4",
+                                       host1="h1",
+                                       host2="h9",
+                                       deviceId1="of:0000000000000005/1",
+                                       deviceId2="of:0000000000000006/1",
+                                       port1="",
+                                       port2="",
+                                       ethType="IPV4",
+                                       mac1="00:00:00:00:00:01",
+                                       mac2="00:00:00:00:00:09",
+                                       bandwidth="",
+                                       lambdaAlloc=False,
+                                       ipProto="",
+                                       ip1="",
+                                       ip2="",
+                                       tcp1="",
+                                       tcp2="",
+                                       sw1="s5",
+                                       sw2="s2",
+                                       expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="IPV4: Point intent test " +
+                                        "successful using IPV4 type with " +
+                                        "MAC addresses",
+                                 onfail="IPV4: Point intent test " +
+                                        "failed using IPV4 type with " +
+                                        "MAC addresses" )
+        main.step( "IPV4_2: Add point intents between h1 and h9" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.pointIntent(
+                                       main,
+                                       name="IPV4_2",
+                                       host1="h1",
+                                       host2="h9",
+                                       deviceId1="of:0000000000000005/1",
+                                       deviceId2="of:0000000000000006/1",
+                                       ipProto="",
+                                       ip1="",
+                                       ip2="",
+                                       tcp1="",
+                                       tcp2="",
+                                       sw1="s5",
+                                       sw2="s2",
+                                       expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="IPV4_2: Point intent test " +
+                                        "successful using IPV4 type with " +
+                                        "no MAC addresses",
+                                 onfail="IPV4_2: Point intent test " +
+                                        "failed using IPV4 type with " +
+                                        "no MAC addresses" )
+
+        main.step( "SDNIP-TCP: Add point intents between h1 and h9" )
+        stepResult = main.TRUE
+        mac1 = main.hostsData[ 'h1' ][ 'mac' ]
+        mac2 = main.hostsData[ 'h9' ][ 'mac' ]
+        try:
+            ip1 = str( main.hostsData[ 'h1' ][ 'ipAddresses' ][ 0 ] ) + "/24"
+            ip2 = str( main.hostsData[ 'h9' ][ 'ipAddresses' ][ 0 ] ) + "/24"
+        except KeyError:
+            main.log.debug( "Key Error getting IP addresses of h1 | h9 in" +
+                            "main.hostsData" )
+            ip1 = main.Mininet1.getIPAddress( 'h1')
+            ip2 = main.Mininet1.getIPAddress( 'h9')
+
+        ipProto = main.params[ 'SDNIP' ][ 'icmpProto' ]
+        # Uneccessary, not including this in the selectors
+        tcp1 = main.params[ 'SDNIP' ][ 'srcPort' ]
+        tcp2 = main.params[ 'SDNIP' ][ 'dstPort' ]
+
+        stepResult = main.intentFunction.pointIntent(
+                                           main,
+                                           name="SDNIP-TCP",
+                                           host1="h1",
+                                           host2="h9",
+                                           deviceId1="of:0000000000000005/1",
+                                           deviceId2="of:0000000000000006/1",
+                                           mac1=mac1,
+                                           mac2=mac2,
+                                           ethType="IPV4",
+                                           ipProto=ipProto,
+                                           ip1=ip1,
+                                           ip2=ip2 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="SDNIP-TCP: Point intent test " +
+                                        "successful using IPV4 type with " +
+                                        "IP protocol TCP enabled",
+                                 onfail="SDNIP-TCP: Point intent test " +
+                                        "failed using IPV4 type with " +
+                                        "IP protocol TCP enabled" )
+
+        main.step( "SDNIP-ICMP: Add point intents between h1 and h9" )
+        stepResult = main.TRUE
+        mac1 = main.hostsData[ 'h1' ][ 'mac' ]
+        mac2 = main.hostsData[ 'h9' ][ 'mac' ]
+        ip1 = str( main.hostsData[ 'h1' ][ 'ipAddresses' ][ 0 ] ) + "/24"
+        ip2 = str( main.hostsData[ 'h9' ][ 'ipAddresses' ][ 0 ] ) + "/24"
+        ipProto = main.params[ 'SDNIP' ][ 'tcpProto' ]
+        tcp1 = main.params[ 'SDNIP' ][ 'srcPort' ]
+        tcp2 = main.params[ 'SDNIP' ][ 'dstPort' ]
+
+        stepResult = main.intentFunction.pointIntent(
+                                           main,
+                                           name="SDNIP-ICMP",
+                                           host1="h1",
+                                           host2="h9",
+                                           deviceId1="of:0000000000000005/1",
+                                           deviceId2="of:0000000000000006/1",
+                                           mac1=mac1,
+                                           mac2=mac2,
+                                           ethType="IPV4",
+                                           ipProto=ipProto )
+
+        utilities.assert_equals( expect=main.TRUE,
+                             actual=stepResult,
+                                 onpass="SDNIP-ICMP: Point intent test " +
+                                        "successful using IPV4 type with " +
+                                        "IP protocol ICMP enabled",
+                                 onfail="SDNIP-ICMP: Point intent test " +
+                                        "failed using IPV4 type with " +
+                                        "IP protocol ICMP enabled" )
+
+        main.step( "DUALSTACK1: Add point intents between h1 and h9" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.pointIntent(
+                                       main,
+                                       name="DUALSTACK1",
+                                       host1="h3",
+                                       host2="h11",
+                                       deviceId1="of:0000000000000005",
+                                       deviceId2="of:0000000000000006",
+                                       port1="3",
+                                       port2="3",
+                                       ethType="IPV4",
+                                       mac1="00:00:00:00:00:03",
+                                       mac2="00:00:00:00:00:0B",
+                                       bandwidth="",
+                                       lambdaAlloc=False,
+                                       ipProto="",
+                                       ip1="",
+                                       ip2="",
+                                       tcp1="",
+                                       tcp2="",
+                                       sw1="s5",
+                                       sw2="s2",
+                                       expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="DUALSTACK1: Point intent test " +
+                                        "successful using IPV4 type with " +
+                                        "MAC addresses",
+                                 onfail="DUALSTACK1: Point intent test " +
+                                        "failed using IPV4 type with " +
+                                        "MAC addresses" )
+
+        main.step( "VLAN: Add point intents between h5 and h21" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.pointIntent(
+                                       main,
+                                       name="VLAN",
+                                       host1="h5",
+                                       host2="h21",
+                                       deviceId1="of:0000000000000005/5",
+                                       deviceId2="of:0000000000000007/5",
+                                       port1="",
+                                       port2="",
+                                       ethType="IPV4",
+                                       mac1="00:00:00:00:00:05",
+                                       mac2="00:00:00:00:00:15",
+                                       bandwidth="",
+                                       lambdaAlloc=False,
+                                       ipProto="",
+                                       ip1="",
+                                       ip2="",
+                                       tcp1="",
+                                       tcp2="",
+                                       sw1="s5",
+                                       sw2="s2",
+                                       expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="VLAN1: Point intent test " +
+                                        "successful using IPV4 type with " +
+                                        "MAC addresses",
+                                 onfail="VLAN1: Point intent test " +
+                                        "failed using IPV4 type with " +
+                                        "MAC addresses" )
+
+        main.step( "1HOP: Add point intents between h1 and h3" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.hostIntent( main,
+                                              name='1HOP',
+                                              host1='h1',
+                                              host2='h3' )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="1HOP: Point intent test " +
+                                        "successful using IPV4 type with " +
+                                        "no MAC addresses",
+                                 onfail="1HOP: Point intent test " +
+                                        "failed using IPV4 type with " +
+                                        "no MAC addresses" )
+
+    def CASE3000( self, main ):
+        """
+            Add single point to multi point intents
+                - Get device ids
+                - Add single point to multi point intents
+                - Check intents
+                - Verify flows
+                - Ping hosts
+                - Reroute
+                    - Link down
+                    - Verify flows
+                    - Check topology
+                    - Ping hosts
+                    - Link up
+                    - Verify flows
+                    - Check topology
+                    - Ping hosts
+                - Remove intents
+        """
+        assert main, "There is no main"
+        assert main.CLIs, "There is no main.CLIs"
+        assert main.Mininet1, "Mininet handle should be named Mininet1"
+        assert main.numSwitch, "Placed the total number of switch topology in \
+                                main.numSwitch"
+
+        main.case( "Single To Multi Point Intents Test - " +
+                   str( main.numCtrls ) + " NODE(S) - OF " + main.OFProtocol )
+        main.caseExplanation = "This test case will test single point to" +\
+                               " multi point intents using " +\
+                               str( main.numCtrls ) + " node(s) cluster;\n" +\
+                               "Different type of hosts will be tested in " +\
+                               "each step such as IPV4, Dual stack, VLAN etc" +\
+                               ";\nThe test will use OF " + main.OFProtocol +\
+                               " OVS running in Mininet"
+
+        main.step( "NOOPTION: Add single point to multi point intents" )
+        stepResult = main.TRUE
+        hostNames = [ 'h8', 'h16', 'h24' ]
+        devices = [ 'of:0000000000000005/8', 'of:0000000000000006/8', \
+                    'of:0000000000000007/8' ]
+        macs = [ '00:00:00:00:00:08', '00:00:00:00:00:10', '00:00:00:00:00:18' ]
+        stepResult = main.intentFunction.singleToMultiIntent(
+                                         main,
+                                         name="NOOPTION",
+                                         hostNames=hostNames,
+                                         devices=devices,
+                                         sw1="s5",
+                                         sw2="s2",
+                                         expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="NOOPTION: Successfully added single "
+                                        + " point to multi point intents" +
+                                        " with no match action",
+                                 onfail="NOOPTION: Failed to add single point"
+                                        + " point to multi point intents" +
+                                        " with no match action" )
+
+        main.step( "IPV4: Add single point to multi point intents" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.singleToMultiIntent(
+                                         main,
+                                         name="IPV4",
+                                         hostNames=hostNames,
+                                         devices=devices,
+                                         ports=None,
+                                         ethType="IPV4",
+                                         macs=macs,
+                                         bandwidth="",
+                                         lambdaAlloc=False,
+                                         ipProto="",
+                                         ipAddresses="",
+                                         tcp="",
+                                         sw1="s5",
+                                         sw2="s2",
+                                         expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="IPV4: Successfully added single "
+                                        + " point to multi point intents" +
+                                        " with IPV4 type and MAC addresses",
+                                 onfail="IPV4: Failed to add single point"
+                                        + " point to multi point intents" +
+                                        " with IPV4 type and MAC addresses" )
+
+        main.step( "IPV4_2: Add single point to multi point intents" )
+        stepResult = main.TRUE
+        hostNames = [ 'h8', 'h16', 'h24' ]
+        stepResult = main.intentFunction.singleToMultiIntent(
+                                         main,
+                                         name="IPV4",
+                                         hostNames=hostNames,
+                                         ethType="IPV4",
+                                         lambdaAlloc=False )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="IPV4_2: Successfully added single "
+                                        + " point to multi point intents" +
+                                        " with IPV4 type and no MAC addresses",
+                                 onfail="IPV4_2: Failed to add single point"
+                                        + " point to multi point intents" +
+                                        " with IPV4 type and no MAC addresses" )
+
+        main.step( "VLAN: Add single point to multi point intents" )
+        stepResult = main.TRUE
+        hostNames = [ 'h4', 'h12', 'h20' ]
+        devices = [ 'of:0000000000000005/4', 'of:0000000000000006/4', \
+                    'of:0000000000000007/4' ]
+        macs = [ '00:00:00:00:00:04', '00:00:00:00:00:0C', '00:00:00:00:00:14' ]
+        stepResult = main.intentFunction.singleToMultiIntent(
+                                         main,
+                                         name="VLAN",
+                                         hostNames=hostNames,
+                                         devices=devices,
+                                         ports=None,
+                                         ethType="IPV4",
+                                         macs=macs,
+                                         bandwidth="",
+                                         lambdaAlloc=False,
+                                         ipProto="",
+                                         ipAddresses="",
+                                         tcp="",
+                                         sw1="s5",
+                                         sw2="s2",
+                                         expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="VLAN: Successfully added single "
+                                        + " point to multi point intents" +
+                                        " with IPV4 type and MAC addresses" +
+                                        " in the same VLAN",
+                                 onfail="VLAN: Failed to add single point"
+                                        + " point to multi point intents" +
+                                        " with IPV4 type and MAC addresses" +
+                                        " in the same VLAN")
+
+    def CASE4000( self, main ):
+        """
+            Add multi point to single point intents
+                - Get device ids
+                - Add multi point to single point intents
+                - Check intents
+                - Verify flows
+                - Ping hosts
+                - Reroute
+                    - Link down
+                    - Verify flows
+                    - Check topology
+                    - Ping hosts
+                    - Link up
+                    - Verify flows
+                    - Check topology
+                    - Ping hosts
+             - Remove intents
+        """
+        assert main, "There is no main"
+        assert main.CLIs, "There is no main.CLIs"
+        assert main.Mininet1, "Mininet handle should be named Mininet1"
+        assert main.numSwitch, "Placed the total number of switch topology in \
+                                main.numSwitch"
+
+        main.case( "Multi To Single Point Intents Test - " +
+                   str( main.numCtrls ) + " NODE(S) - OF " + main.OFProtocol )
+        main.caseExplanation = "This test case will test single point to" +\
+                               " multi point intents using " +\
+                               str( main.numCtrls ) + " node(s) cluster;\n" +\
+                               "Different type of hosts will be tested in " +\
+                               "each step such as IPV4, Dual stack, VLAN etc" +\
+                               ";\nThe test will use OF " + main.OFProtocol +\
+                               " OVS running in Mininet"
+
+        main.step( "NOOPTION: Add multi point to single point intents" )
+        stepResult = main.TRUE
+        hostNames = [ 'h8', 'h16', 'h24' ]
+        devices = [ 'of:0000000000000005/8', 'of:0000000000000006/8', \
+                    'of:0000000000000007/8' ]
+        macs = [ '00:00:00:00:00:08', '00:00:00:00:00:10', '00:00:00:00:00:18' ]
+        stepResult = main.intentFunction.multiToSingleIntent(
+                                         main,
+                                         name="NOOPTION",
+                                         hostNames=hostNames,
+                                         devices=devices,
+                                         sw1="s5",
+                                         sw2="s2",
+                                         expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="NOOPTION: Successfully added multi "
+                                        + " point to single point intents" +
+                                        " with no match action",
+                                 onfail="NOOPTION: Failed to add multi point" +
+                                        " to single point intents" +
+                                        " with no match action" )
+
+        main.step( "IPV4: Add multi point to single point intents" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.multiToSingleIntent(
+                                         main,
+                                         name="IPV4",
+                                         hostNames=hostNames,
+                                         devices=devices,
+                                         ports=None,
+                                         ethType="IPV4",
+                                         macs=macs,
+                                         bandwidth="",
+                                         lambdaAlloc=False,
+                                         ipProto="",
+                                         ipAddresses="",
+                                         tcp="",
+                                         sw1="s5",
+                                         sw2="s2",
+                                         expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="IPV4: Successfully added multi point"
+                                        + " to single point intents" +
+                                        " with IPV4 type and MAC addresses",
+                                 onfail="IPV4: Failed to add multi point" +
+                                        " to single point intents" +
+                                        " with IPV4 type and MAC addresses" )
+
+        main.step( "IPV4_2: Add multi point to single point intents" )
+        stepResult = main.TRUE
+        hostNames = [ 'h8', 'h16', 'h24' ]
+        stepResult = main.intentFunction.multiToSingleIntent(
+                                         main,
+                                         name="IPV4",
+                                         hostNames=hostNames,
+                                         ethType="IPV4",
+                                         lambdaAlloc=False )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="IPV4_2: Successfully added multi point"
+                                        + " to single point intents" +
+                                        " with IPV4 type and no MAC addresses",
+                                 onfail="IPV4_2: Failed to add multi point" +
+                                        " to single point intents" +
+                                        " with IPV4 type and no MAC addresses" )
+
+        main.step( "VLAN: Add multi point to single point intents" )
+        stepResult = main.TRUE
+        hostNames = [ 'h5', 'h13', 'h21' ]
+        devices = [ 'of:0000000000000005/5', 'of:0000000000000006/5', \
+                    'of:0000000000000007/5' ]
+        macs = [ '00:00:00:00:00:05', '00:00:00:00:00:0D', '00:00:00:00:00:15' ]
+        stepResult = main.intentFunction.multiToSingleIntent(
+                                         main,
+                                         name="VLAN",
+                                         hostNames=hostNames,
+                                         devices=devices,
+                                         ports=None,
+                                         ethType="IPV4",
+                                         macs=macs,
+                                         bandwidth="",
+                                         lambdaAlloc=False,
+                                         ipProto="",
+                                         ipAddresses="",
+                                         tcp="",
+                                         sw1="s5",
+                                         sw2="s2",
+                                         expectedLink=18 )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="VLAN: Successfully added multi point"
+                                        + " to single point intents" +
+                                        " with IPV4 type and MAC addresses" +
+                                        " in the same VLAN",
+                                 onfail="VLAN: Failed to add multi point" +
+                                        " to single point intents" )
+
+    def CASE5000( self, main ):
+        """
+        Will add description in next patch set
+        """
+        assert main, "There is no main"
+        assert main.CLIs, "There is no main.CLIs"
+        assert main.Mininet1, "Mininet handle should be named Mininet1"
+        assert main.numSwitch, "Placed the total number of switch topology in \
+                                main.numSwitch"
+        main.case( "Test host mobility with host intents " )
+        main.step( " Testing host mobility by moving h1 from s5 to s6" )
+        h1PreMove = main.hostsData[ "h1" ][ "location" ][ 0:19 ]
+
+        main.log.info( "Moving h1 from s5 to s6")
+
+        main.Mininet1.moveHost( "h1","s5","s6" )
+
+        main.intentFunction.getHostsData( main )
+        h1PostMove = main.hostsData[ "h1" ][ "location" ][ 0:19 ]
+
+        utilities.assert_equals( expect="of:0000000000000006",
+                                 actual=h1PostMove,
+                                 onpass="Mobility: Successfully moved h1 to s6",
+                                 onfail="Mobility: Failed to moved h1 to s6" +
+                                        " to single point intents" +
+                                        " with IPV4 type and MAC addresses" +
+                                        " in the same VLAN" )
+
+        main.step( "IPV4: Add host intents between h1 and h9" )
+        stepResult = main.TRUE
+        stepResult = main.intentFunction.hostIntent( main,
+                                              onosNode='0',
+                                              name='IPV4',
+                                              host1='h1',
+                                              host2='h9',
+                                              host1Id='00:00:00:00:00:01/-1',
+                                              host2Id='00:00:00:00:00:09/-1' )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="IPV4: Host intent test successful " +
+                                        "between two IPV4 hosts",
+                                 onfail="IPV4: Host intent test failed " +
+                                        "between two IPV4 hosts")
diff --git a/TestON/tests/FUNCintentRest/FUNCintentRest.topo b/TestON/tests/FUNCintentRest/FUNCintentRest.topo
new file mode 100755
index 0000000..647bdc6
--- /dev/null
+++ b/TestON/tests/FUNCintentRest/FUNCintentRest.topo
@@ -0,0 +1,57 @@
+<TOPOLOGY>
+    <COMPONENT>
+
+        <ONOSbench>
+            <host>localhost</host>
+            <user>admin</user>
+            <password></password>
+            <type>OnosDriver</type>
+            <connect_order>1</connect_order>
+            <COMPONENTS>
+            </COMPONENTS>
+        </ONOSbench>
+
+        <ONOSrest1>
+            <host>OC1</host>
+            <port>8181</port>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosRestDriver</type>
+            <connect_order>2</connect_order>
+            <COMPONENTS>
+            </COMPONENTS>
+        </ONOSrest1>
+
+        <ONOSrest2>
+            <host>OC2</host>
+            <port>8181</port>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosRestDriver</type>
+            <connect_order>3</connect_order>
+            <COMPONENTS>
+            </COMPONENTS>
+        </ONOSrest2>
+
+        <ONOSrest3>
+            <host>OC3</host>
+            <port>8181</port>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosRestDriver</type>
+            <connect_order>4</connect_order>
+            <COMPONENTS>
+            </COMPONENTS>
+        </ONOSrest3>
+
+        <Mininet1>
+            <host>localhost</host>
+            <user>admin</user>
+            <password></password>
+            <type>MininetCliDriver</type>
+            <connect_order>5</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </Mininet1>
+
+    </COMPONENT>
+</TOPOLOGY>
diff --git a/TestON/tests/FUNCintentRest/README b/TestON/tests/FUNCintentRest/README
new file mode 100644
index 0000000..ce4e99f
--- /dev/null
+++ b/TestON/tests/FUNCintentRest/README
@@ -0,0 +1,39 @@
+Summary:
+        This test suite consist of basic intent functionality testing.
+        The following is an overview of how host intents is being tested.
+        Steps:
+            - Discover hosts
+            - Add host intents
+            - Check intents
+            - Verify flows
+            - Ping hosts
+            - Reroute
+                - Link down
+                - Verify flows
+                - Check topology
+                - Ping hosts
+                - Link up
+                - Verify flows
+                - Check topology
+                - Ping hosts
+            - Remove intents
+        This test suite includes testing of different types of intents such as
+        host, point, single-to-multi and multi-to-single ( More intent types to
+        add later ). The same steps above is being performed to other type of
+        intents.
+
+Required:
+        This test requires Mininet topology file newFuncIntent.py that is in the
+        Dependency folder. You should run the topology file to check for any
+        missing packages. The mininet topology file has different type of hosts
+        including VLAN hosts. Therefore you need to install VLAN module to build
+        the topology correctly.
+
+VLAN configuration:
+        Execute command:
+            $ sudo apt-get install vlan
+        Configuration:
+            $ sudo modprobe 8021q
+        NOTE:To make this configuration permanent
+            $ sudo su -c 'echo "8021q" >> /etc/modules'
+