diff --git a/TestON/tests/FUNCintentRest/Dependency/FuncIntentFunction.py b/TestON/tests/FUNCintentRest/Dependency/FuncIntentFunction.py
new file mode 100644
index 0000000..6bbbb84
--- /dev/null
+++ b/TestON/tests/FUNCintentRest/Dependency/FuncIntentFunction.py
@@ -0,0 +1,1061 @@
+"""
+    Wrapper functions for FuncIntent
+    This functions include Onosclidriver and Mininetclidriver driver functions
+    Author: kelvin@onlab.us
+"""
+import time
+import copy
+import json
+
+def __init__( self ):
+    self.default = ''
+
+def hostIntent( main,
+                name,
+                host1,
+                host2,
+                onosNode=0,
+                host1Id="",
+                host2Id="",
+                mac1="",
+                mac2="",
+                vlan1="-1",
+                vlan2="-1",
+                sw1="",
+                sw2="",
+                expectedLink=0 ):
+    """
+        Description:
+            Verify add-host-intent
+        Steps:
+            - Discover hosts
+            - Add host intents
+            - Check intents
+            - Verify flows
+            - Ping hosts
+            - Reroute
+                - Link down
+                - Verify flows
+                - Check topology
+                - Ping hosts
+                - Link up
+                - Verify flows
+                - Check topology
+                - Ping hosts
+            - Remove intents
+        Required:
+            name - Type of host intent to add eg. IPV4 | VLAN | Dualstack
+            host1 - Name of first host
+            host2 - Name of second host
+        Optional:
+            onosNode - ONOS node to install the intents in main.CLIs[ ]
+                       0 by default so that it will always use the first
+                       ONOS node
+            host1Id - ONOS id of the first host eg. 00:00:00:00:00:01/-1
+            host2Id - ONOS id of the second host
+            mac1 - Mac address of first host
+            mac2 - Mac address of the second host
+            vlan1 - Vlan tag of first host, defaults to -1
+            vlan2 - Vlan tag of second host, defaults to -1
+            sw1 - First switch to bring down & up for rerouting purpose
+            sw2 - Second switch to bring down & up for rerouting purpose
+            expectedLink - Expected link when the switches are down, it should
+                           be two links lower than the links before the two
+                           switches are down
+    """
+
+    # Assert variables
+    assert main, "There is no main variable"
+    assert name, "variable name is empty"
+    assert host1 and host2, "You must specify hosts"
+
+    global itemName
+    itemName = name
+    h1Id = host1Id
+    h2Id = host2Id
+    h1Mac = mac1
+    h2Mac = mac2
+    vlan1 = vlan1
+    vlan2 = vlan2
+    hostNames = [ host1 , host2 ]
+    intentsId = []
+    stepResult = main.TRUE
+    pingResult = main.TRUE
+    intentResult = main.TRUE
+    removeIntentResult = main.TRUE
+    flowResult = main.TRUE
+    topoResult = main.TRUE
+    linkDownResult = main.TRUE
+    linkUpResult = main.TRUE
+    onosNode = int( onosNode )
+
+    if main.hostsData:
+        if not h1Mac:
+            h1Mac = main.hostsData[ host1 ][ 'mac' ]
+        if not h2Mac:
+            h2Mac = main.hostsData[ host2 ][ 'mac' ]
+        if main.hostsData[ host1 ][ 'vlan' ] != '-1':
+            vlan1 = main.hostsData[ host1 ][ 'vlan' ]
+        if main.hostsData[ host2 ][ 'vlan' ] != '-1':
+            vlan2 = main.hostsData[ host2 ][ 'vlan' ]
+        if not h1Id:
+            h1Id = main.hostsData[ host1 ][ 'id' ]
+        if not h2Id:
+            h2Id = main.hostsData[ host2 ][ 'id' ]
+
+    assert h1Id and h2Id, "You must specify host IDs"
+    if not ( h1Id and h2Id ):
+        main.log.info( "There are no host IDs" )
+        return main.FALSE
+
+    # Discover hosts using arping
+    if not main.hostsData:
+        main.log.info( itemName + ": Discover host using arping" )
+        main.Mininet1.arping( host=host1 )
+        main.Mininet1.arping( host=host2 )
+        h1Id = main.CLIs[ 0 ].getHost( mac=h1Mac )
+        h2Id = main.CLIs[ 0 ].getHost( mac=h2Mac )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+
+    # Adding host intents
+    main.log.info( itemName + ": Adding host intents" )
+
+    intent1 = main.CLIs[ onosNode ].addHostIntent( hostIdOne=h1Id,
+                                                   hostIdTwo=h2Id )
+
+    time.sleep( main.hostIntentSleep )
+    intentsId = main.CLIs[ 0 ].getIntentsId()
+    print intentsId
+
+    # Check intents state
+    time.sleep( main.checkIntentSleep )
+    intentResult = checkIntentState( main, intentsId )
+    checkFlowsCount( main )
+
+    # Check intents state again if first check fails...
+    if not intentResult:
+        intentResult = checkIntentState( main, intentsId )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+    # Verify flows
+    checkFlowsState( main )
+
+    # Ping hosts
+    firstPingResult = pingallHosts( main, hostNames )
+    if not firstPingResult:
+        main.log.debug( "First ping failed, there must be" +
+                       " something wrong with ONOS performance" )
+
+    # Ping hosts again...
+    pingResult = pingResult and pingallHosts( main, hostNames )
+
+    # Test rerouting if these variables exist
+    if sw1 and sw2 and expectedLink:
+        # link down
+        linkDownResult = link( main, sw1, sw2, "down" )
+        intentResult = intentResult and checkIntentState( main, intentsId )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, expectedLink )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link down
+        if linkDownResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link down" )
+        else:
+            main.log.error( itemName + ": Failed to bring link down" )
+
+        # link up
+        linkUpResult = link( main, sw1, sw2, "up" )
+        time.sleep( main.rerouteSleep )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, main.numLinks )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link up
+        if linkUpResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link back up" )
+        else:
+            main.log.error( itemName + ": Failed to bring link back up" )
+
+    # Remove all intents
+    removeIntentResult = removeAllIntents( main )
+
+    stepResult = pingResult and linkDownResult and linkUpResult \
+                 and intentResult and removeIntentResult
+
+    return stepResult
+
+def pointIntent( main,
+                 name,
+                 host1,
+                 host2,
+                 onosNode=0,
+                 deviceId1="",
+                 deviceId2="",
+                 port1="",
+                 port2="",
+                 ethType="",
+                 mac1="",
+                 mac2="",
+                 bandwidth="",
+                 lambdaAlloc=False,
+                 ipProto="",
+                 ip1="",
+                 ip2="",
+                 tcp1="",
+                 tcp2="",
+                 sw1="",
+                 sw2="",
+                 expectedLink=0 ):
+
+    """
+        Description:
+            Verify add-point-intent
+        Steps:
+            - Get device ids | ports
+            - Add point intents
+            - Check intents
+            - Verify flows
+            - Ping hosts
+            - Reroute
+                - Link down
+                - Verify flows
+                - Check topology
+                - Ping hosts
+                - Link up
+                - Verify flows
+                - Check topology
+                - Ping hosts
+            - Remove intents
+        Required:
+            name - Type of point intent to add eg. IPV4 | VLAN | Dualstack
+            host1 - Name of first host
+            host2 - Name of second host
+        Optional:
+            onosNode - ONOS node to install the intents in main.CLIs[ ]
+                       0 by default so that it will always use the first
+                       ONOS node
+            deviceId1 - ONOS device id of the first switch, the same as the
+                        location of the first host eg. of:0000000000000001/1,
+                        located at device 1 port 1
+            deviceId2 - ONOS device id of the second switch
+            port1 - The port number where the first host is attached
+            port2 - The port number where the second host is attached
+            ethType - Ethernet type eg. IPV4, IPV6
+            mac1 - Mac address of first host
+            mac2 - Mac address of the second host
+            bandwidth - Bandwidth capacity
+            lambdaAlloc - Allocate lambda, defaults to False
+            ipProto - IP protocol
+            ip1 - IP address of first host
+            ip2 - IP address of second host
+            tcp1 - TCP port of first host
+            tcp2 - TCP port of second host
+            sw1 - First switch to bring down & up for rerouting purpose
+            sw2 - Second switch to bring down & up for rerouting purpose
+            expectedLink - Expected link when the switches are down, it should
+                           be two links lower than the links before the two
+                           switches are down
+    """
+
+    assert main, "There is no main variable"
+    assert name, "variable name is empty"
+    assert host1 and host2, "You must specify hosts"
+
+    global itemName
+    itemName = name
+    host1 = host1
+    host2 = host2
+    hostNames = [ host1, host2 ]
+    intentsId = []
+
+    pingResult = main.TRUE
+    intentResult = main.TRUE
+    removeIntentResult = main.TRUE
+    flowResult = main.TRUE
+    topoResult = main.TRUE
+    linkDownResult = main.TRUE
+    linkUpResult = main.TRUE
+    onosNode = int( onosNode )
+
+    # Adding bidirectional point  intents
+    main.log.info( itemName + ": Adding point intents" )
+    intent1 = main.CLIs[ onosNode ].addPointIntent( ingressDevice=deviceId1,
+                                                    egressDevice=deviceId2,
+                                                    ingressPort=port1,
+                                                    egressPort=port2,
+                                                    ethType=ethType,
+                                                    ethSrc=mac1,
+                                                    ethDst=mac2,
+                                                    bandwidth=bandwidth,
+                                                    lambdaAlloc=lambdaAlloc,
+                                                    ipProto=ipProto,
+                                                    ipSrc=ip1,
+                                                    ipDst=ip2,
+                                                    tcpSrc=tcp1,
+                                                    tcpDst=tcp2 )
+
+    intent2 = main.CLIs[ onosNode ].addPointIntent( ingressDevice=deviceId2,
+                                                    egressDevice=deviceId1,
+                                                    ingressPort=port2,
+                                                    egressPort=port1,
+                                                    ethType=ethType,
+                                                    ethSrc=mac2,
+                                                    ethDst=mac1,
+                                                    bandwidth=bandwidth,
+                                                    lambdaAlloc=lambdaAlloc,
+                                                    ipProto=ipProto,
+                                                    ipSrc=ip2,
+                                                    ipDst=ip1,
+                                                    tcpSrc=tcp2,
+                                                    tcpDst=tcp1 )
+    intentsId = main.CLIs[ 0 ].getIntentsId()
+    print intentsId
+
+    # Check intents state
+    time.sleep( main.checkIntentSleep )
+    intentResult = checkIntentState( main, intentsId )
+    # Check flows count in each node
+    checkFlowsCount( main )
+
+    # Check intents state again if first check fails...
+    if not intentResult:
+        intentResult = checkIntentState( main, intentsId )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+    # Verify flows
+    checkFlowsState( main )
+
+    # Ping hosts
+    firstPingResult = pingallHosts( main, hostNames )
+    if not firstPingResult:
+        main.log.debug( "First ping failed, there must be" +
+                       " something wrong with ONOS performance" )
+
+    # Ping hosts again...
+    pingResult = pingResult and pingallHosts( main, hostNames )
+
+    # Test rerouting if these variables exist
+    if sw1 and sw2 and expectedLink:
+        # link down
+        linkDownResult = link( main, sw1, sw2, "down" )
+        intentResult = intentResult and checkIntentState( main, intentsId )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, expectedLink )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link down
+        if linkDownResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link down" )
+        else:
+            main.log.error( itemName + ": Failed to bring link down" )
+
+        # link up
+        linkUpResult = link( main, sw1, sw2, "up" )
+        time.sleep( main.rerouteSleep )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, main.numLinks )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link up
+        if linkUpResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link back up" )
+        else:
+            main.log.error( itemName + ": Failed to bring link back up" )
+
+    # Remove all intents
+    removeIntentResult = removeAllIntents( main )
+
+    stepResult = pingResult and linkDownResult and linkUpResult \
+                 and intentResult and removeIntentResult
+
+    return stepResult
+
+def singleToMultiIntent( main,
+                         name,
+                         hostNames,
+                         onosNode=0,
+                         devices="",
+                         ports=None,
+                         ethType="",
+                         macs=None,
+                         bandwidth="",
+                         lambdaAlloc=False,
+                         ipProto="",
+                         ipAddresses="",
+                         tcp="",
+                         sw1="",
+                         sw2="",
+                         expectedLink=0 ):
+    """
+        Verify Single to Multi Point intents
+        NOTE:If main.hostsData is not defined, variables data should be passed
+        in the same order index wise. All devices in the list should have the
+        same format, either all the devices have its port or it doesn't.
+        eg. hostName = [ 'h1', 'h2' ,..  ]
+            devices = [ 'of:0000000000000001', 'of:0000000000000002', ...]
+            ports = [ '1', '1', ..]
+            ...
+        Description:
+            Verify add-single-to-multi-intent iterates through the list of given
+            host | devices and add intents
+        Steps:
+            - Get device ids | ports
+            - Add single to multi point intents
+            - Check intents
+            - Verify flows
+            - Ping hosts
+            - Reroute
+                - Link down
+                - Verify flows
+                - Check topology
+                - Ping hosts
+                - Link up
+                - Verify flows
+                - Check topology
+                - Ping hosts
+            - Remove intents
+        Required:
+            name - Type of point intent to add eg. IPV4 | VLAN | Dualstack
+            hostNames - List of host names
+        Optional:
+            onosNode - ONOS node to install the intents in main.CLIs[ ]
+                       0 by default so that it will always use the first
+                       ONOS node
+            devices - List of device ids in the same order as the hosts
+                      in hostNames
+            ports - List of port numbers in the same order as the device in
+                    devices
+            ethType - Ethernet type eg. IPV4, IPV6
+            macs - List of hosts mac address in the same order as the hosts in
+                   hostNames
+            bandwidth - Bandwidth capacity
+            lambdaAlloc - Allocate lambda, defaults to False
+            ipProto - IP protocol
+            ipAddresses - IP addresses of host in the same order as the hosts in
+                          hostNames
+            tcp - TCP ports in the same order as the hosts in hostNames
+            sw1 - First switch to bring down & up for rerouting purpose
+            sw2 - Second switch to bring down & up for rerouting purpose
+            expectedLink - Expected link when the switches are down, it should
+                           be two links lower than the links before the two
+                           switches are down
+    """
+
+    assert main, "There is no main variable"
+    assert hostNames, "You must specify hosts"
+    assert devices or main.hostsData, "You must specify devices"
+
+    global itemName
+    itemName = name
+    tempHostsData = {}
+    intentsId = []
+    onosNode = int( onosNode )
+
+    macsDict = {}
+    ipDict = {}
+    if hostNames and devices:
+        if len( hostNames ) != len( devices ):
+            main.log.debug( "hosts and devices does not have the same length" )
+            #print "len hostNames = ", len( hostNames )
+            #print "len devices = ", len( devices )
+            return main.FALSE
+        if ports:
+            if len( ports ) != len( devices ):
+                main.log.error( "Ports and devices does " +
+                                "not have the same length" )
+                #print "len devices = ", len( devices )
+                #print "len ports = ", len( ports )
+                return main.FALSE
+        else:
+            main.log.info( "Device Ports are not specified" )
+        if macs:
+            for i in range( len( devices ) ):
+                macsDict[ devices[ i ] ] = macs[ i ]
+
+    elif hostNames and not devices and main.hostsData:
+        devices = []
+        main.log.info( "singleToMultiIntent function is using main.hostsData" )
+        for host in hostNames:
+               devices.append( main.hostsData.get( host ).get( 'location' ) )
+               macsDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+                           main.hostsData.get( host ).get( 'mac' )
+               ipDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+                           main.hostsData.get( host ).get( 'ipAddresses' )
+        #print main.hostsData
+
+    #print 'host names = ', hostNames
+    #print 'devices = ', devices
+    #print "macsDict = ", macsDict
+
+    pingResult = main.TRUE
+    intentResult = main.TRUE
+    removeIntentResult = main.TRUE
+    flowResult = main.TRUE
+    topoResult = main.TRUE
+    linkDownResult = main.TRUE
+    linkUpResult = main.TRUE
+
+    devicesCopy = copy.copy( devices )
+    if ports:
+        portsCopy = copy.copy( ports )
+    main.log.info( itemName + ": Adding single point to multi point intents" )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+
+    # Adding bidirectional point  intents
+    for i in range( len( devices ) ):
+        ingressDevice = devicesCopy[ i ]
+        egressDeviceList = copy.copy( devicesCopy )
+        egressDeviceList.remove( ingressDevice )
+        if ports:
+            portIngress = portsCopy[ i ]
+            portEgressList = copy.copy( portsCopy )
+            del portEgressList[ i ]
+        else:
+            portIngress = ""
+            portEgressList = None
+        if not macsDict:
+            srcMac = ""
+        else:
+            srcMac = macsDict[ ingressDevice ]
+            if srcMac == None:
+                main.log.debug( "There is no MAC in device - " + ingressDevice )
+                srcMac = ""
+
+        intentsId.append(
+                        main.CLIs[ onosNode ].addSinglepointToMultipointIntent(
+                                            ingressDevice=ingressDevice,
+                                            egressDeviceList=egressDeviceList,
+                                            portIngress=portIngress,
+                                            portEgressList=portEgressList,
+                                            ethType=ethType,
+                                            ethSrc=srcMac,
+                                            bandwidth=bandwidth,
+                                            lambdaAlloc=lambdaAlloc,
+                                            ipProto=ipProto,
+                                            ipSrc="",
+                                            ipDst="",
+                                            tcpSrc="",
+                                            tcpDst="" ) )
+
+    # Wait some time for the flow to go through when using multi instance
+    pingResult = pingallHosts( main, hostNames )
+
+    # Check intents state
+    time.sleep( main.checkIntentSleep )
+    intentResult = checkIntentState( main, intentsId )
+
+    # Check intents state again if first check fails...
+    if not intentResult:
+        intentResult = checkIntentState( main, intentsId )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+    # Verify flows
+    checkFlowsState( main )
+
+    pingResult = pingResult and pingallHosts( main, hostNames )
+
+    # Test rerouting if these variables exist
+    if sw1 and sw2 and expectedLink:
+        # link down
+        linkDownResult = link( main, sw1, sw2, "down" )
+        intentResult = intentResult and checkIntentState( main, intentsId )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, expectedLink )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link down
+        if linkDownResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link down" )
+        else:
+            main.log.error( itemName + ": Failed to bring link down" )
+
+        # link up
+        linkUpResult = link( main, sw1, sw2, "up" )
+        time.sleep( main.rerouteSleep )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, main.numLinks )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link up
+        if linkUpResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link back up" )
+        else:
+            main.log.error( itemName + ": Failed to bring link back up" )
+
+    # Remove all intents
+    removeIntentResult = removeAllIntents( main, intentsId )
+
+    stepResult = pingResult and linkDownResult and linkUpResult \
+                 and intentResult and removeIntentResult
+
+    return stepResult
+
+def multiToSingleIntent( main,
+                         name,
+                         hostNames,
+                         onosNode=0,
+                         devices="",
+                         ports=None,
+                         ethType="",
+                         macs=None,
+                         bandwidth="",
+                         lambdaAlloc=False,
+                         ipProto="",
+                         ipAddresses="",
+                         tcp="",
+                         sw1="",
+                         sw2="",
+                         expectedLink=0 ):
+    """
+        Verify Single to Multi Point intents
+        NOTE:If main.hostsData is not defined, variables data should be passed in the
+        same order index wise. All devices in the list should have the same
+        format, either all the devices have its port or it doesn't.
+        eg. hostName = [ 'h1', 'h2' ,..  ]
+            devices = [ 'of:0000000000000001', 'of:0000000000000002', ...]
+            ports = [ '1', '1', ..]
+            ...
+        Description:
+            Verify add-multi-to-single-intent
+        Steps:
+            - Get device ids | ports
+            - Add multi to single point intents
+            - Check intents
+            - Verify flows
+            - Ping hosts
+            - Reroute
+                - Link down
+                - Verify flows
+                - Check topology
+                - Ping hosts
+                - Link up
+                - Verify flows
+                - Check topology
+                - Ping hosts
+            - Remove intents
+        Required:
+            name - Type of point intent to add eg. IPV4 | VLAN | Dualstack
+            hostNames - List of host names
+        Optional:
+            onosNode - ONOS node to install the intents in main.CLIs[ ]
+                       0 by default so that it will always use the first
+                       ONOS node
+            devices - List of device ids in the same order as the hosts
+                      in hostNames
+            ports - List of port numbers in the same order as the device in
+                    devices
+            ethType - Ethernet type eg. IPV4, IPV6
+            macs - List of hosts mac address in the same order as the hosts in
+                   hostNames
+            bandwidth - Bandwidth capacity
+            lambdaAlloc - Allocate lambda, defaults to False
+            ipProto - IP protocol
+            ipAddresses - IP addresses of host in the same order as the hosts in
+                          hostNames
+            tcp - TCP ports in the same order as the hosts in hostNames
+            sw1 - First switch to bring down & up for rerouting purpose
+            sw2 - Second switch to bring down & up for rerouting purpose
+            expectedLink - Expected link when the switches are down, it should
+                           be two links lower than the links before the two
+                           switches are down
+    """
+
+    assert main, "There is no main variable"
+    assert hostNames, "You must specify hosts"
+    assert devices or main.hostsData, "You must specify devices"
+
+    global itemName
+    itemName = name
+    tempHostsData = {}
+    intentsId = []
+    onosNode = int( onosNode )
+
+    macsDict = {}
+    ipDict = {}
+    if hostNames and devices:
+        if len( hostNames ) != len( devices ):
+            main.log.debug( "hosts and devices does not have the same length" )
+            #print "len hostNames = ", len( hostNames )
+            #print "len devices = ", len( devices )
+            return main.FALSE
+        if ports:
+            if len( ports ) != len( devices ):
+                main.log.error( "Ports and devices does " +
+                                "not have the same length" )
+                #print "len devices = ", len( devices )
+                #print "len ports = ", len( ports )
+                return main.FALSE
+        else:
+            main.log.info( "Device Ports are not specified" )
+        if macs:
+            for i in range( len( devices ) ):
+                macsDict[ devices[ i ] ] = macs[ i ]
+    elif hostNames and not devices and main.hostsData:
+        devices = []
+        main.log.info( "multiToSingleIntent function is using main.hostsData" )
+        for host in hostNames:
+               devices.append( main.hostsData.get( host ).get( 'location' ) )
+               macsDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+                           main.hostsData.get( host ).get( 'mac' )
+               ipDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+                           main.hostsData.get( host ).get( 'ipAddresses' )
+        #print main.hostsData
+
+    #print 'host names = ', hostNames
+    #print 'devices = ', devices
+    #print "macsDict = ", macsDict
+
+    pingResult = main.TRUE
+    intentResult = main.TRUE
+    removeIntentResult = main.TRUE
+    flowResult = main.TRUE
+    topoResult = main.TRUE
+    linkDownResult = main.TRUE
+    linkUpResult = main.TRUE
+
+    devicesCopy = copy.copy( devices )
+    if ports:
+        portsCopy = copy.copy( ports )
+    main.log.info( itemName + ": Adding multi point to single point intents" )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+
+    # Adding bidirectional point  intents
+    for i in range( len( devices ) ):
+        egressDevice = devicesCopy[ i ]
+        ingressDeviceList = copy.copy( devicesCopy )
+        ingressDeviceList.remove( egressDevice )
+        if ports:
+            portEgress = portsCopy[ i ]
+            portIngressList = copy.copy( portsCopy )
+            del portIngressList[ i ]
+        else:
+            portEgress = ""
+            portIngressList = None
+        if not macsDict:
+            dstMac = ""
+        else:
+            dstMac = macsDict[ egressDevice ]
+            if dstMac == None:
+                main.log.debug( "There is no MAC in device - " + egressDevice )
+                dstMac = ""
+
+        intentsId.append(
+                        main.CLIs[ onosNode ].addMultipointToSinglepointIntent(
+                                            ingressDeviceList=ingressDeviceList,
+                                            egressDevice=egressDevice,
+                                            portIngressList=portIngressList,
+                                            portEgress=portEgress,
+                                            ethType=ethType,
+                                            ethDst=dstMac,
+                                            bandwidth=bandwidth,
+                                            lambdaAlloc=lambdaAlloc,
+                                            ipProto=ipProto,
+                                            ipSrc="",
+                                            ipDst="",
+                                            tcpSrc="",
+                                            tcpDst="" ) )
+
+    pingResult = pingallHosts( main, hostNames )
+
+    # Check intents state
+    time.sleep( main.checkIntentSleep )
+    intentResult = checkIntentState( main, intentsId )
+
+    # Check intents state again if first check fails...
+    if not intentResult:
+        intentResult = checkIntentState( main, intentsId )
+
+    # Check flows count in each node
+    checkFlowsCount( main )
+    # Verify flows
+    checkFlowsState( main )
+
+    # Ping hosts
+    pingResult = pingResult and pingallHosts( main, hostNames )
+    # Ping hosts again...
+    pingResult = pingResult and pingallHosts( main, hostNames )
+
+    # Test rerouting if these variables exist
+    if sw1 and sw2 and expectedLink:
+        # link down
+        linkDownResult = link( main, sw1, sw2, "down" )
+        intentResult = intentResult and checkIntentState( main, intentsId )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, expectedLink )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link down
+        if linkDownResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link down" )
+        else:
+            main.log.error( itemName + ": Failed to bring link down" )
+
+        # link up
+        linkUpResult = link( main, sw1, sw2, "up" )
+        time.sleep( main.rerouteSleep )
+
+        # Check flows count in each node
+        checkFlowsCount( main )
+        # Verify flows
+        checkFlowsState( main )
+
+        # Check OnosTopology
+        topoResult = checkTopology( main, main.numLinks )
+
+        # Ping hosts
+        pingResult = pingResult and pingallHosts( main, hostNames )
+
+        intentResult = checkIntentState( main, intentsId )
+
+        # Checks ONOS state in link up
+        if linkUpResult and topoResult and pingResult and intentResult:
+            main.log.info( itemName + ": Successfully brought link back up" )
+        else:
+            main.log.error( itemName + ": Failed to bring link back up" )
+
+    # Remove all intents
+    removeIntentResult = removeAllIntents( main, intentsId )
+
+    stepResult = pingResult and linkDownResult and linkUpResult \
+                 and intentResult and removeIntentResult
+
+    return stepResult
+
+def pingallHosts( main, hostList, pingType="ipv4" ):
+    # Ping all host in the hosts list variable
+    print "Pinging : ", hostList
+    pingResult = main.TRUE
+    pingResult = main.Mininet1.pingallHosts( hostList, pingType )
+    return pingResult
+
+def getHostsData( main ):
+    """
+        Use fwd app and pingall to discover all the hosts
+    """
+
+    activateResult = main.TRUE
+    appCheck = main.TRUE
+    getDataResult = main.TRUE
+    main.log.info( "Activating reactive forwarding app " )
+    activateResult = main.CLIs[ 0 ].activateApp( "org.onosproject.fwd" )
+    if not activateResult:
+        main.log.error( "Something went wrong installing fwd app" )
+    time.sleep( main.fwdSleep )
+    pingResult = main.Mininet1.pingall( timeout = 600 )
+    hostsJson = json.loads( main.CLIs[ 0 ].hosts() )
+    hosts = main.Mininet1.getHosts().keys()
+    # TODO: Make better use of new getHosts function
+    for host in hosts:
+        main.hostsData[ host ] = {}
+        main.hostsData[ host ][ 'mac' ] =  \
+            main.Mininet1.getMacAddress( host ).upper()
+        for hostj in hostsJson:
+            if main.hostsData[ host ][ 'mac' ] == hostj[ 'mac' ]:
+                main.hostsData[ host ][ 'id' ] = hostj[ 'id' ]
+                main.hostsData[ host ][ 'vlan' ] = hostj[ 'vlan' ]
+                main.hostsData[ host ][ 'location' ] = \
+                            hostj[ 'location' ][ 'elementId' ] + '/' + \
+                            hostj[ 'location' ][ 'port' ]
+                main.hostsData[ host ][ 'ipAddresses' ] = hostj[ 'ipAddresses' ]
+
+    main.log.info( "Deactivating reactive forwarding app " )
+    deactivateResult = main.CLIs[ 0 ].deactivateApp( "org.onosproject.fwd" )
+    if activateResult and deactivateResult and main.hostsData:
+        main.log.info( "Successfully used fwd app to discover hosts " )
+        getDataResult = main.TRUE
+    else:
+        main.log.info( "Failed to use fwd app to discover hosts " )
+        getDataResult = main.FALSE
+
+    print main.hostsData
+
+    return getDataResult
+
+def checkTopology( main, expectedLink ):
+    statusResult = main.TRUE
+    # Check onos topology
+    main.log.info( itemName + ": Checking ONOS topology " )
+
+    for i in range( main.numCtrls ):
+        topologyResult = main.CLIs[ i ].topology()
+        statusResult = main.ONOSbench.checkStatus( topologyResult,
+                                                   main.numSwitch,
+                                                   expectedLink )\
+                       and statusResult
+    if not statusResult:
+        main.log.error( itemName + ": Topology mismatch" )
+    else:
+        main.log.info( itemName + ": Topology match" )
+    return statusResult
+
+def checkIntentState( main, intentsId ):
+    """
+        This function will check intent state to make sure all the intents
+        are in INSTALLED state
+    """
+
+    intentResult = main.TRUE
+    results = []
+
+    main.log.info( itemName + ": Checking intents state" )
+    # First check of intents
+    for i in range( main.numCtrls ):
+        tempResult = main.CLIs[ i ].checkIntentState( intentsId=intentsId )
+        results.append( tempResult )
+
+    expectedState = [ 'INSTALLED', 'INSTALLING' ]
+
+    if all( result == main.TRUE for result in results ):
+        main.log.info( itemName + ": Intents are installed correctly" )
+    else:
+        # Wait for at least 5 second before checking the intents again
+        time.sleep( 5 )
+        results = []
+        # Second check of intents since some of the intents may be in
+        # INSTALLING state, they should be in INSTALLED at this time
+        for i in range( main.numCtrls ):
+            tempResult = main.CLIs[ i ].checkIntentState(
+                                                        intentsId=intentsId )
+            results.append( tempResult )
+        if all( result == main.TRUE for result in results ):
+            main.log.info( itemName + ": Intents are installed correctly" )
+        else:
+            main.log.error( itemName + ": Intents are NOT installed correctly" )
+            intentResult = main.FALSE
+
+    return intentResult
+
+def checkFlowsState( main ):
+
+    main.log.info( itemName + ": Check flows state" )
+    checkFlowsResult = main.CLIs[ 0 ].checkFlowsState()
+    return checkFlowsResult
+
+def link( main, sw1, sw2, option):
+
+    # link down
+    main.log.info( itemName + ": Bring link " + option + "between " +
+                       sw1 + " and " + sw2 )
+    linkResult = main.Mininet1.link( end1=sw1, end2=sw2, option=option )
+    return linkResult
+
+def removeAllIntents( main ):
+    """
+        Remove all intents in the intentsId
+    """
+
+    onosSummary = []
+    removeIntentResult = main.TRUE
+    # Remove intents
+    removeIntentResult = main.CLIs[ 0 ].removeAllIntents( )
+
+    if removeIntentResult:
+        main.log.info( itemName + ": There are no more intents remaining, " +
+                       "successfully removed all the intents." )
+
+    return removeIntentResult
+
+def checkFlowsCount( main ):
+    """
+        Check flows count in each node
+    """
+
+    flowsCount = []
+    main.log.info( itemName + ": Checking flows count in each ONOS node" )
+    for i in range( main.numCtrls ):
+        flowsCount.append( len( json.loads( main.CLIs[ i ].flows() ) ) )
+
+    if flowsCount:
+        if all( flows==flowsCount[ 0 ] for flows in flowsCount ):
+            main.log.info( itemName + ": There are " + str( flowsCount[ 0 ] ) +
+                           " flows in all ONOS node" )
+        else:
+            for i in range( main.numCtrls ):
+                main.log.debug( itemName + ": ONOS node " + str( i + 1 ) +
+                                " has " + flowsCount[ i ] + " flows" )
+    else:
+        main.log.error( "Checking flows count failed, check summary command" )
+        return main.FALSE
+
+    return main.TRUE
+