diff --git a/TestON/drivers/common/api/controller/onosrestdriver.py b/TestON/drivers/common/api/controller/onosrestdriver.py
index 3ed6ab3..ebccce0 100644
--- a/TestON/drivers/common/api/controller/onosrestdriver.py
+++ b/TestON/drivers/common/api/controller/onosrestdriver.py
@@ -1480,3 +1480,254 @@
             main.log.exception( self.name + ": Uncaught exception!" )
             main.cleanup()
             main.exit()
+
+    def createFlowBatch( self,
+                      numSw = 1,
+                      swIndex = 1,
+                      batchSize = 1,
+                      batchIndex = 1,
+                      deviceIdpreFix = "of:",
+                      appId=0,
+                      deviceID="",
+                      ingressPort="",
+                      egressPort="",
+                      ethType="",
+                      ethSrc="",
+                      ethDst="",
+                      vlan="",
+                      ipProto="",
+                      ipSrc=(),
+                      ipDst=(),
+                      tcpSrc="",
+                      tcpDst="",
+                      udpDst="",
+                      udpSrc="",
+                      mpls="",
+                      ip="DEFAULT",
+                      port="DEFAULT",
+                      debug=False ):
+        """
+        Description:
+            Creates batches of MAC-rule flows for POST.
+            Predefined MAC: 2 MS Hex digit for iterating devices
+                        Next 5 Hex digit for iterating batch numbers
+                        Next 5 Hex digit for iterating flows within a batch
+        Required:
+            * deviceId: id of the device
+        Optional:
+            * ingressPort: port ingress device
+            * egressPort: port  of egress device
+            * ethType: specify ethType
+            * ethSrc: specify ethSrc ( i.e. src mac addr )
+            * ethDst: specify ethDst ( i.e. dst mac addr )
+            * ipProto: specify ip protocol
+            * ipSrc: specify ip source address with mask eg. ip#/24
+                as a tuple (type, ip#)
+            * ipDst: specify ip destination address eg. ip#/24
+                as a tuple (type, ip#)
+            * tcpSrc: specify tcp source port
+            * tcpDst: specify tcp destination port
+        Returns:
+            Returns main.TRUE for successful requests; Returns main.FALSE
+            if error on requests;
+            Returns None for exceptions
+        NOTE:
+            The ip and port option are for the requests input's ip and port
+            of the ONOS node
+        """
+        #from pprint import pprint
+
+        flowJsonList = []
+        flowJsonBatch = {"flows":flowJsonList}
+        dev = swIndex
+
+        for fl in range(1, batchSize + 1):
+            flowJson = { "priority":100,
+                           "deviceId":"",
+                           "isPermanent":"true",
+                           "timeout":0,
+                           "treatment":{"instructions":[]},
+                           "selector": {"criteria":[]}}
+
+            #main.log.info("fl: " + str(fl))
+            if dev <= numSw:
+                deviceId = deviceIdpreFix + "{0:0{1}x}".format(dev,16)
+                #print deviceId
+                flowJson['deviceId'] = deviceId
+                dev += 1
+            else:
+                dev = 1
+                deviceId = deviceIdpreFix + "{0:0{1}x}".format(dev,16)
+                #print deviceId
+                flowJson['deviceId'] = deviceId
+                dev += 1
+
+                # ethSrc starts with "0"; ethDst starts with "1"
+                # 2 Hex digit of device number; 5 digits of batch index number; 5 digits of batch size
+            ethS = "%02X" %int( "0" + "{0:0{1}b}".format(dev,7), 2 ) + \
+                   "{0:0{1}x}".format(batchIndex,5) + "{0:0{1}x}".format(fl,5)
+            ethSrc = ':'.join(ethS[i:i+2] for i in range(0,len(ethS),2))
+            ethD = "%02X" %int( "1" + "{0:0{1}b}".format(dev,7), 2 ) + \
+                   "{0:0{1}x}".format(batchIndex,5) + "{0:0{1}x}".format(fl,5)
+            ethDst = ':'.join(ethD[i:i+2] for i in range(0,len(ethD),2))
+
+            if appId:
+                flowJson[ "appId" ] = appId
+
+            if egressPort:
+                flowJson[ 'treatment' ][ 'instructions' ].append( {
+                                                        "type":"OUTPUT",
+                                                        "port":egressPort } )
+            if ingressPort:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":"IN_PORT",
+                                                        "port":ingressPort } )
+            if ethType:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":"ETH_TYPE",
+                                                        "ethType":ethType } )
+            if ethSrc:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":"ETH_SRC",
+                                                        "mac":ethSrc } )
+            if ethDst:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":"ETH_DST",
+                                                        "mac":ethDst } )
+            if vlan:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":"VLAN_VID",
+                                                        "vlanId":vlan } )
+            if mpls:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":"MPLS_LABEL",
+                                                        "label":mpls } )
+            if ipSrc:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":ipSrc[0],
+                                                        "ip":ipSrc[1] } )
+            if ipDst:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":ipDst[0],
+                                                        "ip":ipDst[1] } )
+            if tcpSrc:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":"TCP_SRC",
+                                                        "tcpPort": tcpSrc } )
+            if tcpDst:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":"TCP_DST",
+                                                        "tcpPort": tcpDst } )
+            if udpSrc:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":"UDP_SRC",
+                                                        "udpPort": udpSrc } )
+            if udpDst:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":"UDP_DST",
+                                                        "udpPort": udpDst } )
+            if ipProto:
+                flowJson[ 'selector' ][ 'criteria' ].append( {
+                                                        "type":"IP_PROTO",
+                                                        "protocol": ipProto } )
+            #pprint(flowJson)
+            flowJsonList.append(flowJson)
+
+        main.log.info("Number of flows in batch: " + str( len(flowJsonList) ) )
+        flowJsonBatch['flows'] = flowJsonList
+        #pprint(flowJsonBatch)
+
+        return flowJsonBatch
+
+
+    def sendFlowBatch( self, batch={}, ip="DEFAULT", port="DEFAULT", debug=False ):
+        """
+        Description:
+            Sends a single flow batch through /flows REST API.
+        Required:
+            * The batch of flows
+        Returns:
+            Returns main.TRUE for successful requests; Returns main.FALSE
+            if error on requests;
+            Returns None for exceptions
+        NOTE:
+            The ip and port option are for the requests input's ip and port
+            of the ONOS node
+        """
+        import time
+
+        try:
+            if debug: main.log.debug( "Adding flow: " + self.pprint( batch ) )
+            output = None
+            if ip == "DEFAULT":
+                main.log.warn( "No ip given, reverting to ip from topo file" )
+                ip = self.ip_address
+            if port == "DEFAULT":
+                main.log.warn( "No port given, reverting to port " +
+                               "from topo file" )
+                port = self.port
+            url = "/flows/"
+            response = self.send( ip,
+                                  port,
+                                  method="POST",
+                                  url=url,
+                                  data=json.dumps( batch ) )
+            #main.log.info("Post response is: ", str(response[0]))
+            if response[0] == 200:
+                main.log.info( self.name + ": Successfully POST flow batch" )
+                return main.TRUE, response
+            else:
+                main.log.error( "Error with REST request, response was: " +
+                                    str( response ) )
+                return main.FALSE
+        except NotImplementedError as e:
+            raise e  # Inform the caller
+        except ( AttributeError, TypeError ):
+            main.log.exception( self.name + ": Object not as expected" )
+            return None
+        except Exception:
+            main.log.exception( self.name + ": Uncaught exception!" )
+            main.cleanup()
+            main.exit()
+
+    def removeFlowBatch( self, batch={},
+                       ip="DEFAULT", port="DEFAULT" ):
+        """
+        Description:
+            Remove a batch of flows
+        Required:
+            flow batch
+        Return:
+            Returns main.TRUE if successfully deletes flows, otherwise
+            Returns main.FALSE, Returns None on error
+        """
+        try:
+            output = None
+            if ip == "DEFAULT":
+                main.log.warn( "No ip given, reverting to ip from topo file" )
+                ip = self.ip_address
+            if port == "DEFAULT":
+                main.log.warn( "No port given, reverting to port " +
+                               "from topo file" )
+                port = self.port
+            # NOTE: REST url requires the intent id to be in decimal form
+
+            response = self.send( ip,
+                                  port,
+                                  method="DELETE",
+                                  url="/flows/",
+                                  data = json.dumps(batch) )
+            if response:
+                if 200 <= response[ 0 ] <= 299:
+                    return main.TRUE
+                else:
+                    main.log.error( "Error with REST request, response was: " +
+                                    str( response ) )
+                    return main.FALSE
+        except ( AttributeError, TypeError ):
+            main.log.exception( self.name + ": Object not as expected" )
+            return None
+        except Exception:
+            main.log.exception( self.name + ": Uncaught exception!" )
+            main.cleanup()
+            main.exit()
diff --git a/TestON/drivers/common/cli/emulator/mininetclidriver.py b/TestON/drivers/common/cli/emulator/mininetclidriver.py
index c198c4f..5a165a2 100644
--- a/TestON/drivers/common/cli/emulator/mininetclidriver.py
+++ b/TestON/drivers/common/cli/emulator/mininetclidriver.py
@@ -1985,7 +1985,7 @@
             response = main.FALSE
         return response
 
-    def arping( self, srcHost="", dstHost="10.128.20.211", ethDevice="", output=main.TRUE ):
+    def arping( self, srcHost="", dstHost="10.128.20.211", ethDevice="", output=True, noResult=False ):
         """
         Description:
             Sends arp message from mininet host for hosts discovery
@@ -1997,7 +1997,10 @@
         """
         if ethDevice:
             ethDevice = '-I ' + ethDevice + ' '
-        cmd = srcHost + " arping -c1 " + ethDevice + dstHost
+        cmd = srcHost + " arping -c1 "
+        if noResult:
+            cmd += "-w10 " # If we don't want the actural arping result, set -w10, arping will exit after 10 ms.
+        cmd += ethDevice + dstHost
         try:
             if output:
                 main.log.info( "Sending: " + cmd )
diff --git a/TestON/drivers/common/cli/onosdriver.py b/TestON/drivers/common/cli/onosdriver.py
index 4f69254..e0a1a6a 100644
--- a/TestON/drivers/common/cli/onosdriver.py
+++ b/TestON/drivers/common/cli/onosdriver.py
@@ -20,7 +20,8 @@
 import types
 import pexpect
 import os
-import os.path
+import re
+import subprocess
 from requests.models import Response
 from drivers.common.clidriver import CLI
 
@@ -34,6 +35,7 @@
         self.name = None
         self.home = None
         self.handle = None
+        self.nicAddr = None
         super( CLI, self ).__init__()
 
     def connect( self, **connectargs ):
@@ -183,7 +185,7 @@
             main.cleanup()
             main.exit()
 
-    def onosPackage( self, opTimeout=120 ):
+    def onosPackage( self, opTimeout=180 ):
         """
         Produce a self-contained tar.gz file that can be deployed
         and executed on any platform with Java 8 JRE.
@@ -720,6 +722,7 @@
         tempList = tempList[ :-1 ]
         # Structure the nic string ip
         nicAddr = ".".join( tempList ) + ".*"
+        self.nicAddr = nicAddr
         onosNicString = "export ONOS_NIC=" + nicAddr
 
         try:
@@ -945,7 +948,7 @@
                                       "ONOS\sis\salready\sinstalled",
                                       "already\sup-to-date",
                                       "\$",
-                                      pexpect.TIMEOUT ], timeout=60 )
+                                      pexpect.TIMEOUT ], timeout=180 )
             if i == 0:
                 main.log.warn( "Network is unreachable" )
                 self.handle.expect( "\$" )
@@ -2219,26 +2222,26 @@
         serviceConfig.write("""${ONOS_HOME}/apache-karaf-$KARAF_VERSION/bin/karaf "$@" \n """)
         serviceConfig.close()
 
-    def createDBFile(self, testData):
+    def createDBFile( self, testData ):
 
         filename = main.TEST + "DB"
         DBString = ""
 
         for item in testData:
-            if type(item) is string:
+            if type( item ) is string:
                 item = "'" + item + "'"
-            if testData.index(item) < len(testData-1):
+            if testData.index( item ) < len( testData - 1 ):
                 item += ","
-            DBString += str(item)
+            DBString += str( item )
 
-        DBFile = open(filename, "a")
-        DBFile.write(DBString)
+        DBFile = open( filename, "a" )
+        DBFile.write( DBString )
         DBFile.close()
 
-    def verifySummary(self, ONOSIp,*deviceCount):
+    def verifySummary( self, ONOSIp, *deviceCount ):
 
-        self.handle.sendline("onos " + ONOSIp  + " summary")
-        self.handle.expect(":~")
+        self.handle.sendline( "onos " + ONOSIp  + " summary" )
+        self.handle.expect( ":~" )
 
         summaryStr = self.handle.before
         print "\nSummary\n==============\n" + summaryStr + "\n\n"
@@ -2250,18 +2253,65 @@
         passed = False
         if "SCC(s)=1," in summaryStr:
             passed = True
-            print("Summary is verifed")
+            print "Summary is verifed"
         else:
-            print("Summary failed")
+            print "Summary failed"
 
         if deviceCount:
             print" ============================="
-            checkStr = "devices=" + str(deviceCount[0]) + ","
+            checkStr = "devices=" + str( deviceCount[0] ) + ","
             print "Checkstr: " + checkStr
             if checkStr not in summaryStr:
                 passed = False
-                print("Device count failed")
+                print "Device count failed"
             else:
                 print "device count verified"
 
         return passed
+
+    def getIpAddr( self ):
+        """
+        Update self.ip_address with numerical ip address. If multiple IP's are
+        located on the device, will attempt to use self.nicAddr to choose the
+        right one. Defaults to 127.0.0.1 if no other address is found or cannot
+        determine the correct address.
+
+        ONLY WORKS WITH IPV4 ADDRESSES
+        """
+        try:
+            localhost = "127.0.0.1"
+            ipPat = "\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}"
+            pattern = re.compile( ipPat )
+            match = re.search( pattern, self.ip_address )
+            if self.nicAddr:
+                nicPat = self.nicAddr.replace( ".", "\." ).replace( "\*", r"\d{1,3}" )
+                nicPat = re.compile( nicPat )
+            else:
+                nicPat = None
+            # IF self.ip_address is an ip address and matches
+            #    self.nicAddr: return self.ip_address
+            if match:
+                curIp = match.group(0)
+                if nicPat:
+                    nicMatch = re.search( nicPat, curIp )
+                    if nicMatch:
+                        return self.ip_address
+            # ELSE: attempt to get correct address.
+            raw = subprocess.check_output( "ifconfig")
+            ifPat = re.compile( "inet addr:({})".format( ipPat ) )
+            ips = re.findall( ifPat, raw )
+            if nicPat:
+                for ip in ips:
+                    curMatch = re.search( nicPat, ip )
+                    if curMatch:
+                        self.ip_address = ip
+                        return ip
+            else:
+                tmpList = [ ip for ip in ips if ip is not localhost ]
+                if len(tmpList) == 1:
+                    curIp = tmpList[0]
+                    self.ip_address = curIp
+                    return curIp
+            return localhost
+        except Exception:
+            main.log.exception( "Uncaught exception" )
diff --git a/TestON/tests/FUNC/FUNCintentRest/FUNCintentRest.py b/TestON/tests/FUNC/FUNCintentRest/FUNCintentRest.py
index 8c6c8d5..f48ae3b 100644
--- a/TestON/tests/FUNC/FUNCintentRest/FUNCintentRest.py
+++ b/TestON/tests/FUNC/FUNCintentRest/FUNCintentRest.py
@@ -155,6 +155,7 @@
         # main.scale[ 0 ] determines the current number of ONOS controller
         main.numCtrls = int( main.scale[ 0 ] )
         main.flowCompiler = "Flow Rules"
+        main.initialized = main.TRUE
 
         main.case( "Starting up " + str( main.numCtrls ) +
                    " node(s) ONOS cluster" )
@@ -233,22 +234,22 @@
 
         for i in range( main.numCtrls ):
             onosIsUp = onosIsUp and main.ONOSbench.isup( main.ONOSip[ i ] )
-        if onosIsUp == main.TRUE:
-            main.log.report( "ONOS instance is up and ready" )
-        else:
-            main.log.report( "ONOS instance may not be up, stop and " +
-                             "start ONOS again " )
-            for i in range( main.numCtrls ):
-                stopResult = stopResult and \
-                        main.ONOSbench.onosStop( main.ONOSip[ i ] )
-            for i in range( main.numCtrls ):
-                startResult = startResult and \
-                        main.ONOSbench.onosStart( main.ONOSip[ i ] )
+            if onosIsUp == main.TRUE:
+                main.log.report( "ONOS instance {0} is up and ready".format( i + 1 ) )
+            else:
+                main.log.report( "ONOS instance {0} may not be up, stop and ".format( i + 1 ) +
+                                 "start ONOS again " )
+                stopResult = stopResult and main.ONOSbench.onosStop( main.ONOSip[ i ] )
+                startResult = startResult and main.ONOSbench.onosStart( main.ONOSip[ i ] )
+                if not startResult or stopResult:
+                    main.log.report( "ONOS instance {0} did not start correctly.".format( i + 1 ) )
         stepResult = onosIsUp and stopResult and startResult
         utilities.assert_equals( expect=main.TRUE,
                                  actual=stepResult,
                                  onpass="ONOS service is ready",
                                  onfail="ONOS service did not start properly" )
+        if not stepResult:
+            main.initialized = main.FALSE
 
         # Start an ONOS cli to provide functionality that is not currently
         # supported by the Rest API remove this when Leader Checking is supported
@@ -264,6 +265,8 @@
                                  actual=stepResult,
                                  onpass="Successfully start ONOS cli",
                                  onfail="Failed to start ONOS cli" )
+        if not stepResult:
+            main.initialized = main.FALSE
 
         # Remove the first element in main.scale list
         main.scale.remove( main.scale[ 0 ] )
@@ -477,6 +480,9 @@
         """
             Start Mininet topology with OF 1.0 switches
         """
+        if main.initialized == main.FALSE:
+            main.log.error( "Test components did not start correctly, skipping further tests" )
+            main.skipCase()
         main.OFProtocol = "1.0"
         main.log.report( "Start Mininet topology with OF 1.0 switches" )
         main.case( "Start Mininet topology with OF 1.0 switches" )
@@ -496,13 +502,15 @@
                                  onfail="Failed to load topology" )
         # Exit if topology did not load properly
         if not topoResult:
-            main.cleanup()
-            main.exit()
+            main.initialized = main.FALSE
 
     def CASE11( self, main ):
         """
             Start Mininet topology with OF 1.3 switches
         """
+        if main.initialized == main.FALSE:
+            main.log.error( "Test components did not start correctly, skipping further tests" )
+            main.skipCase()
         main.OFProtocol = "1.3"
         main.log.report( "Start Mininet topology with OF 1.3 switches" )
         main.case( "Start Mininet topology with OF 1.3 switches" )
@@ -522,8 +530,7 @@
                                  onfail="Failed to load topology" )
         # Exit if topology did not load properly
         if not topoResult:
-            main.cleanup()
-            main.exit()
+            main.initialized = main.FALSE
 
     def CASE12( self, main ):
         """
@@ -531,6 +538,9 @@
         """
         import re
 
+        if main.initialized == main.FALSE:
+            main.log.error( "Test components did not start correctly, skipping further tests" )
+            main.skipCase()
         main.case( "Assign switches to controllers" )
         main.step( "Assigning switches to controllers" )
         main.caseExplanation = "Assign OF " + main.OFProtocol +\
@@ -551,8 +561,9 @@
                                                          ip=tempONOSip,
                                                          port='6653' )
         if not assignResult:
-            main.cleanup()
-            main.exit()
+            main.log.error( "Problem assigning mastership of switches, skipping further test cases" )
+            main.initialized = main.FALSE
+            main.skipCase()
 
         for i in range( 1, ( main.numSwitch + 1 ) ):
             response = main.Mininet1.getSwController( "s" + str( i ) )
@@ -568,11 +579,16 @@
                                         "to controller",
                                  onfail="Failed to assign switches to " +
                                         "controller" )
+        if not stepResult:
+            main.initialized = main.FALSE
 
     def CASE13( self,main ):
         """
             Create Scapy components
         """
+        if main.initialized == main.FALSE:
+            main.log.error( "Test components did not start correctly, skipping further tests" )
+            main.skipCase()
         main.case( "Create scapy components" )
         main.step( "Create scapy components" )
         import json
@@ -595,11 +611,16 @@
                                  actual=scapyResult,
                                  onpass="Successfully created Scapy Components",
                                  onfail="Failed to discover Scapy Components" )
+        if not scapyResult:
+            main.initialized = main.FALSE
 
     def CASE14( self, main ):
         """
             Discover all hosts and store its data to a dictionary
         """
+        if main.initialized == main.FALSE:
+            main.log.error( "Test components did not start correctly, skipping further tests" )
+            main.skipCase()
         main.case( "Discover all hosts" )
 
         stepResult = main.TRUE
@@ -623,17 +644,23 @@
                                  actual=stepResult,
                                  onpass="Successfully discovered hosts",
                                  onfail="Failed to discover hosts" )
+        if not stepResult:
+            main.initialized = main.FALSE
 
     def CASE15( self, main ):
         """
             Discover all hosts with scapy arp packets and store its data to a dictionary
         """
+        if main.initialized == main.FALSE:
+            main.log.error( "Test components did not start correctly, skipping further tests" )
+            main.skipCase()
         main.case( "Discover all hosts using scapy" )
         main.step( "Send packets from each host to the first host and confirm onos discovery" )
 
         import collections
         if len( main.scapyHosts ) < 1:
             main.log.error( "No scapy hosts have been created" )
+            main.initialized = main.FALSE
             main.skipCase()
 
         # Send ARP packets from each scapy host component
@@ -647,6 +674,9 @@
                                  actual=stepResult,
                                  onpass="ONOS correctly discovered all hosts",
                                  onfail="ONOS incorrectly discovered hosts" )
+        if not stepResult:
+            main.initialized = main.FALSE
+            main.skipCase()
 
         main.step( "Populate hostsData" )
         stepResult = main.intentFunction.populateHostData( main )
@@ -654,11 +684,16 @@
                                  actual=stepResult,
                                  onpass="Successfully populated hostsData",
                                  onfail="Failed to populate hostsData" )
+        if not stepResult:
+            main.initialized = main.FALSE
 
     def CASE16( self, main ):
         """
             Balance Masters
         """
+        if main.initialized == main.FALSE:
+            main.log.error( "Test components did not start correctly, skipping further tests" )
+            main.skipCase()
         main.case( "Balance mastership of switches" )
         main.step( "Balancing mastership of switches" )
 
@@ -669,11 +704,16 @@
                                  actual=stepResult,
                                  onpass="Successfully balanced mastership of switches",
                                  onfail="Failed to balance mastership of switches" )
+        if not stepResult:
+            main.initialized = main.FALSE
 
     def CASE17( self, main ):
         """
             Use Flow Objectives
         """
+        if main.initialized == main.FALSE:
+            main.log.error( "Test components did not start correctly, skipping further tests" )
+            main.skipCase()
         main.case( "Enable intent compilation using Flow Objectives" )
         main.step( "Enabling Flow Objectives" )
 
@@ -688,6 +728,8 @@
                                  actual=stepResult,
                                  onpass="Successfully activated Flow Objectives",
                                  onfail="Failed to activate Flow Objectives" )
+        if not stepResult:
+            main.initialized = main.FALSE
 
     def CASE18( self, main ):
         """
@@ -750,14 +792,31 @@
         import time
         import json
         import re
-
+        if main.initialized == main.FALSE:
+            main.log.error( "Test components did not start correctly, skipping further tests" )
+            main.skipCase()
         # Assert variables - These variable's name|format must be followed
         # if you want to use the wrapper function
         assert main, "There is no main"
-        assert main.CLIs, "There is no main.CLIs"
-        assert main.Mininet1, "Mininet handle should be named Mininet1"
-        assert main.numSwitch, "Placed the total number of switch topology in \
-                                main.numSwitch"
+        try:
+            assert main.CLIs
+        except AssertionError:
+            main.log.error( "There is no main.CLIs, skipping test cases" )
+            main.initialized = main.FALSE
+            main.skipCase()
+        try:
+            assert main.Mininet1
+        except AssertionError:
+            main.log.error( "Mininet handle should be named Mininet1, skipping test cases" )
+            main.initialized = main.FALSE
+            main.skipCase()
+        try:
+            assert main.numSwitch
+        except AssertionError:
+            main.log.error( "Place the total number of switch topology in \
+                             main.numSwitch" )
+            main.initialized = main.FALSE
+            main.skipCase()
 
         # Save leader candidates
         intentLeadersOld = main.CLIs2[ 0 ].leaderCandidates()
@@ -971,14 +1030,31 @@
         import time
         import json
         import re
-
+        if main.initialized == main.FALSE:
+            main.log.error( "Test components did not start correctly, skipping further tests" )
+            main.skipCase()
         # Assert variables - These variable's name|format must be followed
         # if you want to use the wrapper function
         assert main, "There is no main"
-        assert main.CLIs, "There is no main.CLIs"
-        assert main.Mininet1, "Mininet handle should be named Mininet1"
-        assert main.numSwitch, "Placed the total number of switch topology in \
-                                main.numSwitch"
+        try:
+            assert main.CLIs
+        except AssertionError:
+            main.log.error( "There is no main.CLIs, skipping test cases" )
+            main.initialized = main.FALSE
+            main.skipCase()
+        try:
+            assert main.Mininet1
+        except AssertionError:
+            main.log.error( "Mininet handle should be named Mininet1, skipping test cases" )
+            main.initialized = main.FALSE
+            main.skipCase()
+        try:
+            assert main.numSwitch
+        except AssertionError:
+            main.log.error( "Place the total number of switch topology in \
+                             main.numSwitch" )
+            main.initialized = main.FALSE
+            main.skipCase()
 
         main.case( "Point Intents Test - " + str( main.numCtrls ) +
                    " NODE(S) - OF " + main.OFProtocol + " - Using " + main.flowCompiler )
@@ -1532,58 +1608,35 @@
                                         " to single point intents" )
 
     def CASE5000( self, main ):
-        # """
-        # Will add description in next patch set
-        # """
-        # assert main, "There is no main"
-        # assert main.CLIs, "There is no main.CLIs"
-        # assert main.Mininet1, "Mininet handle should be named Mininet1"
-        # assert main.numSwitch, "Placed the total number of switch topology in \
-        #                         main.numSwitch"
-        # main.case( "Test host mobility with host intents " )
-        # main.step( " Testing host mobility by moving h1 from s5 to s6" )
-        # h1PreMove = main.hostsData[ "h1" ][ "location" ][ 0:19 ]
-
-        # main.log.info( "Moving h1 from s5 to s6")
-
-        # main.Mininet1.moveHost( "h1","s5","s6" )
-
-        # main.intentFunction.getHostsData( main )
-        # h1PostMove = main.hostsData[ "h1" ][ "location" ][ 0:19 ]
-
-        # utilities.assert_equals( expect="of:0000000000000006",
-        #                          actual=h1PostMove,
-        #                          onpass="Mobility: Successfully moved h1 to s6",
-        #                          onfail="Mobility: Failed to moved h1 to s6" +
-        #                                 " to single point intents" +
-        #                                 " with IPV4 type and MAC addresses" +
-        #                                 " in the same VLAN" )
-
-        # main.step( "IPV4: Add host intents between h1 and h9" )
-        # stepResult = main.TRUE
-        # stepResult = main.intentFunction.hostIntent( main,
-        #                                       onosNode='0',
-        #                                       name='IPV4',
-        #                                       host1='h1',
-        #                                       host2='h9',
-        #                                       host1Id='00:00:00:00:00:01/-1',
-        #                                       host2Id='00:00:00:00:00:09/-1' )
-
-        # utilities.assert_equals( expect=main.TRUE,
-        #                          actual=stepResult,
-        #                          onpass="IPV4: Host intent test successful " +
-        #                                 "between two IPV4 hosts",
-        #                          onfail="IPV4: Host intent test failed " +
-        #                                 "between two IPV4 hosts")
         """
         Tests Host Mobility
         Modifies the topology location of h1
         """
+        if main.initialized == main.FALSE:
+            main.log.error( "Test components did not start correctly, skipping further tests" )
+            main.skipCase()
+        # Assert variables - These variable's name|format must be followed
+        # if you want to use the wrapper function
         assert main, "There is no main"
-        assert main.CLIs, "There is no main.CLIs"
-        assert main.Mininet1, "Mininet handle should be named Mininet1"
-        assert main.numSwitch, "Placed the total number of switch topology in \
-                                main.numSwitch"
+        try:
+            assert main.CLIs
+        except AssertionError:
+            main.log.error( "There is no main.CLIs, skipping test cases" )
+            main.initialized = main.FALSE
+            main.skipCase()
+        try:
+            assert main.Mininet1
+        except AssertionError:
+            main.log.error( "Mininet handle should be named Mininet1, skipping test cases" )
+            main.initialized = main.FALSE
+            main.skipCase()
+        try:
+            assert main.numSwitch
+        except AssertionError:
+            main.log.error( "Place the total number of switch topology in \
+                             main.numSwitch" )
+            main.initialized = main.FALSE
+            main.skipCase()
         main.case( "Test host mobility with host intents " )
         main.step( "Testing host mobility by moving h1 from s5 to s6" )
         h1PreMove = main.hostsData[ "h1" ][ "location" ][ 0:19 ]
diff --git a/TestON/tests/FUNC/FUNCintentRest/dependencies/FuncIntentFunction.py b/TestON/tests/FUNC/FUNCintentRest/dependencies/FuncIntentFunction.py
index 900abd5..8a48a13 100644
--- a/TestON/tests/FUNC/FUNCintentRest/dependencies/FuncIntentFunction.py
+++ b/TestON/tests/FUNC/FUNCintentRest/dependencies/FuncIntentFunction.py
@@ -66,24 +66,31 @@
 
     main.log.info( itemName + ": Adding single point to multi point intents" )
 
-    if not host1.get( "id" ):
-        main.log.warn( "ID not given for host1 {0}. Loading from main.hostData".format( host1.get( "name" ) ) )
-        main.log.debug( main.hostsData.get( host1.get( "name" ) ) )
-        host1[ "id" ] = main.hostsData.get( host1.get( "name" ) ).get( "id" )
+    try:
+        if not host1.get( "id" ):
+            main.log.warn( "ID not given for host1 {0}. Loading from main.hostData".format( host1.get( "name" ) ) )
+            main.log.debug( main.hostsData.get( host1.get( "name" ) ) )
+            host1[ "id" ] = main.hostsData.get( host1.get( "name" ) ).get( "id" )
 
-    if not host2.get( "id" ):
-        main.log.warn( "ID not given for host2 {0}. Loading from main.hostData".format( host2.get( "name" ) ) )
-        host2[ "id" ] = main.hostsData.get( host2.get( "name" ) ).get( "id" )
+        if not host2.get( "id" ):
+            main.log.warn( "ID not given for host2 {0}. Loading from main.hostData".format( host2.get( "name" ) ) )
+            host2[ "id" ] = main.hostsData.get( host2.get( "name" ) ).get( "id" )
 
-    # Adding host intents
-    main.log.info( itemName + ": Adding host intents" )
+        # Adding host intents
+        main.log.info( itemName + ": Adding host intents" )
 
-    intent1 = main.CLIs[ onosNode ].addHostIntent( hostIdOne=host1.get( "id" ),
-                                                   hostIdTwo=host2.get( "id" ) )
+        intent1 = main.CLIs[ onosNode ].addHostIntent( hostIdOne=host1.get( "id" ),
+                                                       hostIdTwo=host2.get( "id" ) )
 
-    # Get all intents ID in the system, time delay right after intents are added
-    time.sleep( main.addIntentSleep )
-    intentsId = main.CLIs[ 0 ].getIntentsId()
+        # Get all intents ID in the system, time delay right after intents are added
+        time.sleep( main.addIntentSleep )
+        intentsId = main.CLIs[ 0 ].getIntentsId()
+    except (KeyError, TypeError):
+        errorMsg = "There was a problem loading the hosts data."
+        if intentsId:
+            errorMsg += "  There was a problem installing host to host intent."
+        main.log.error( errorMsg )
+        return main.FALSE
 
     if utilities.retry ( f=checkIntentState, retValue=main.FALSE,
                          args = (main, intentsId ), sleep=main.checkIntentSleep ):
@@ -157,16 +164,20 @@
 
     main.log.info( itemName + ": Testing Host Intent" )
 
-    if not host1.get( "id" ):
-        main.log.warn( "Id not given for host1 {0}. Loading from main.hostData".format( host1.get( "name" ) ) )
-        host1[ "id" ] = main.hostsData.get( host1.get( "name" ) ).get( "location" )
+    try:
+        if not host1.get( "id" ):
+            main.log.warn( "Id not given for host1 {0}. Loading from main.hostData".format( host1.get( "name" ) ) )
+            host1[ "id" ] = main.hostsData.get( host1.get( "name" ) ).get( "location" )
 
-    if not host2.get( "id" ):
-        main.log.warn( "Id not given for host2 {0}. Loading from main.hostData".format( host2.get( "name" ) ) )
-        host2[ "id" ] = main.hostsData.get( host2.get( "name" ) ).get( "location" )
+        if not host2.get( "id" ):
+            main.log.warn( "Id not given for host2 {0}. Loading from main.hostData".format( host2.get( "name" ) ) )
+            host2[ "id" ] = main.hostsData.get( host2.get( "name" ) ).get( "location" )
 
-    senderNames = [ host1.get( "name" ), host2.get( "name" ) ]
-    recipientNames = [ host1.get( "name" ), host2.get( "name" ) ]
+        senderNames = [ host1.get( "name" ), host2.get( "name" ) ]
+        recipientNames = [ host1.get( "name" ), host2.get( "name" ) ]
+    except ( KeyError, TypeError ):
+        main.log.error( "There was a problem loading the hosts data." )
+        return main.FALSE
 
     testResult = main.TRUE
     main.log.info( itemName + ": Adding single point to multi point intents" )
@@ -336,50 +347,58 @@
 
     main.log.info( itemName + ": Adding single to single point intents" )
 
-    for sender in senders:
-        if not sender.get( "device" ):
-            main.log.warn( "Device not given for sender {0}. Loading from main.hostData".format( sender.get( "name" ) ) )
-            sender[ "device" ] = main.hostsData.get( sender.get( "name" ) ).get( "location" )
+    try:
+        for sender in senders:
+            if not sender.get( "device" ):
+                main.log.warn( "Device not given for sender {0}. Loading from main.hostData".format( sender.get( "name" ) ) )
+                sender[ "device" ] = main.hostsData.get( sender.get( "name" ) ).get( "location" )
 
-    for recipient in recipients:
-        if not recipient.get( "device" ):
-            main.log.warn( "Device not given for recipient {0}. Loading from main.hostData".format( recipient.get( "name" ) ) )
-            recipient[ "device" ] = main.hostsData.get( recipient.get( "name" ) ).get( "location" )
+        for recipient in recipients:
+            if not recipient.get( "device" ):
+                main.log.warn( "Device not given for recipient {0}. Loading from main.hostData".format( recipient.get( "name" ) ) )
+                recipient[ "device" ] = main.hostsData.get( recipient.get( "name" ) ).get( "location" )
 
 
-    ingressDevice = senders[ 0 ].get( "device" )
-    egressDevice = recipients[ 0 ].get( "device" )
+        ingressDevice = senders[ 0 ].get( "device" )
+        egressDevice = recipients[ 0 ].get( "device" )
 
-    portIngress = senders[ 0 ].get( "port", "" )
-    portEgress = recipients[ 0 ].get( "port", "" )
-    main.log.debug( ingressDevice )
-    main.log.debug( egressDevice )
+        portIngress = senders[ 0 ].get( "port", "" )
+        portEgress = recipients[ 0 ].get( "port", "" )
+        main.log.debug( ingressDevice )
+        main.log.debug( egressDevice )
 
-    srcMac = senders[ 0 ].get( "mac" )
-    dstMac = recipients[ 0 ].get( "mac" )
+        srcMac = senders[ 0 ].get( "mac" )
+        dstMac = recipients[ 0 ].get( "mac" )
 
-    ipSrc = senders[ 0 ].get( "ip" )
-    ipDst = recipients[ 0 ].get( "ip" )
+        ipSrc = senders[ 0 ].get( "ip" )
+        ipDst = recipients[ 0 ].get( "ip" )
 
-    intent1 = main.CLIs[ onosNode ].addPointIntent(
-                                        ingressDevice=ingressDevice,
-                                        egressDevice=egressDevice,
-                                        ingressPort=portIngress,
-                                        egressPort=portEgress,
-                                        ethType=ethType,
-                                        ethSrc=srcMac,
-                                        ethDst=dstMac,
-                                        bandwidth=bandwidth,
-                                        lambdaAlloc=lambdaAlloc,
-                                        ipProto=ipProto,
-                                        ipSrc=ipSrc,
-                                        ipDst=ipDst,
-                                        tcpSrc=tcpSrc,
-                                        tcpDst=tcpDst )
+        intent1 = main.CLIs[ onosNode ].addPointIntent(
+                                            ingressDevice=ingressDevice,
+                                            egressDevice=egressDevice,
+                                            ingressPort=portIngress,
+                                            egressPort=portEgress,
+                                            ethType=ethType,
+                                            ethSrc=srcMac,
+                                            ethDst=dstMac,
+                                            bandwidth=bandwidth,
+                                            lambdaAlloc=lambdaAlloc,
+                                            ipProto=ipProto,
+                                            ipSrc=ipSrc,
+                                            ipDst=ipDst,
+                                            tcpSrc=tcpSrc,
+                                            tcpDst=tcpDst )
 
-    time.sleep( main.addIntentSleep )
-    intentsId = main.CLIs[ 0 ].getIntentsId()
+        time.sleep( main.addIntentSleep )
+        intentsId = main.CLIs[ 0 ].getIntentsId()
+    except (KeyError, TypeError):
+        errorMsg = "There was a problem loading the hosts data."
+        if intentId:
+            errorMsg += "  There was a problem installing Point to Point intent."
+        main.log.error( errorMsg )
+        return main.FALSE
 
+    # Check intent state
     if utilities.retry ( f=checkIntentState, retValue=main.FALSE,
                          args = (main, intentsId ), sleep=main.checkIntentSleep ):
         return intentsId
@@ -387,13 +406,6 @@
         main.log.error( "Single to Single point intent did not install correctly" )
         return main.FALSE
 
-    # Check intents state
-    if utilities.retry( f=checkIntentState, retValue=main.FALSE, args=( main, intentsId ), sleep=main.checkIntentSleep ):
-        return intentsId
-    else:
-        main.log.error( "Point Intent did not install correctly" )
-        return main.FALSE
-
 def testPointIntent( main,
                      name,
                      intentId,
@@ -472,21 +484,25 @@
 
     main.log.info( itemName + ": Testing Point Intent" )
 
-    # Names for scapy
-    senderNames = [ x.get( "name" ) for x in senders ]
-    recipientNames = [ x.get( "name" ) for x in recipients ]
-    badSenderNames = [ x.get( "name" ) for x in badSenders ]
-    badRecipientNames = [ x.get( "name" ) for x in badRecipients ]
+    try:
+        # Names for scapy
+        senderNames = [ x.get( "name" ) for x in senders ]
+        recipientNames = [ x.get( "name" ) for x in recipients ]
+        badSenderNames = [ x.get( "name" ) for x in badSenders ]
+        badRecipientNames = [ x.get( "name" ) for x in badRecipients ]
 
-    for sender in senders:
-        if not sender.get( "device" ):
-            main.log.warn( "Device not given for sender {0}. Loading from main.hostData".format( sender.get( "name" ) ) )
-            sender[ "device" ] = main.hostsData.get( sender.get( "name" ) ).get( "location" )
+        for sender in senders:
+            if not sender.get( "device" ):
+                main.log.warn( "Device not given for sender {0}. Loading from main.hostData".format( sender.get( "name" ) ) )
+                sender[ "device" ] = main.hostsData.get( sender.get( "name" ) ).get( "location" )
 
-    for recipient in recipients:
-        if not recipient.get( "device" ):
-            main.log.warn( "Device not given for recipient {0}. Loading from main.hostData".format( recipient.get( "name" ) ) )
-            recipient[ "device" ] = main.hostsData.get( recipient.get( "name" ) ).get( "location" )
+        for recipient in recipients:
+            if not recipient.get( "device" ):
+                main.log.warn( "Device not given for recipient {0}. Loading from main.hostData".format( recipient.get( "name" ) ) )
+                recipient[ "device" ] = main.hostsData.get( recipient.get( "name" ) ).get( "location" )
+    except (KeyError, TypeError):
+        main.log.error( "There was a problem loading the hosts data." )
+        return main.FALSE
 
     testResult = main.TRUE
     main.log.info( itemName + ": Testing point intents" )
@@ -1534,22 +1550,30 @@
         controllerStr = str( controller + 1 )  # ONOS node number
         # Compare Hosts
         # Load hosts data for controller node
-        if hosts[ controller ] and "Error" not in hosts[ controller ]:
-            try:
-                hostData = json.loads( hosts[ controller ] )
-            except ( TypeError, ValueError ):
-                main.log.error( "Could not load json:" + str( hosts[ controller ] ) )
-                hostFails.append( controllerStr )
+        try:
+            if hosts[ controller ]:
+                main.log.info( "Hosts discovered" )
             else:
-                onosHostIPs = [ x.get( "ipAddresses" )[ 0 ]
-                                for x in hostData
-                                if len( x.get( "ipAddresses" ) ) > 0 ]
-                if not set( collections.Counter( scapyHostIPs ) ).issubset( set ( collections.Counter( onosHostIPs ) ) ):
-                    main.log.warn( "Controller {0} only sees nodes with {1} IPs. It should see all of the following: {2}".format( controllerStr, onosHostIPs, scapyHostIPs ) )
+                main.log.error( "Problem discovering hosts" )
+            if hosts[ controller ] and "Error" not in hosts[ controller ]:
+                try:
+                    hostData = json.loads( hosts[ controller ] )
+                except ( TypeError, ValueError ):
+                    main.log.error( "Could not load json:" + str( hosts[ controller ] ) )
                     hostFails.append( controllerStr )
-        else:
-            main.log.error( "Hosts returned nothing or an error." )
-            hostFails.append( controllerStr )
+                else:
+                    onosHostIPs = [ x.get( "ipAddresses" )[ 0 ]
+                                    for x in hostData
+                                    if len( x.get( "ipAddresses" ) ) > 0 ]
+                    if not set( collections.Counter( scapyHostIPs ) ).issubset( set ( collections.Counter( onosHostIPs ) ) ):
+                        main.log.warn( "Controller {0} only sees nodes with {1} IPs. It should see all of the following: {2}".format( controllerStr, onosHostIPs, scapyHostIPs ) )
+                        hostFails.append( controllerStr )
+            else:
+                main.log.error( "Hosts returned nothing or an error." )
+                hostFails.append( controllerStr )
+        except IndexError:
+            main.log.error( "Hosts returned nothing, Failed to discover hosts." )
+            return main.FALSE
 
     if hostFails:
         main.log.error( "List of failed ONOS Nodes:" + ', '.join(map(str, hostFails )) )
@@ -1579,9 +1603,18 @@
                                 hostj[ 'location' ][ 'port' ]
                     main.hostsData[ host ][ 'ipAddresses' ] = hostj[ 'ipAddresses' ]
         return main.TRUE
+    except ValueError:
+        main.log.error( "ValueError while populating hostsData" )
+        return main.FALSE
     except KeyError:
         main.log.error( "KeyError while populating hostsData")
         return main.FALSE
+    except IndexError:
+        main.log.error( "IndexError while populating hostsData" )
+        return main.FALSE
+    except TypeError:
+        main.log.error( "TypeError while populating hostsData" )
+        return main.FALSE
 
 def scapyCheckConnection( main, senders, recipients, packet=None, packetFilter=None, expectFailure=False ):
     """
diff --git a/TestON/tests/MISC/SCPFbatchFlowResp/SCPFbatchFlowResp.params b/TestON/tests/MISC/SCPFbatchFlowResp/SCPFbatchFlowResp.params
new file mode 100755
index 0000000..a413601
--- /dev/null
+++ b/TestON/tests/MISC/SCPFbatchFlowResp/SCPFbatchFlowResp.params
@@ -0,0 +1,72 @@
+
+<PARAMS>
+    <!--
+    # CASE - Descritpion
+    # 1,2,10,1000,1100,2000,1200,2000,100
+    # 1 - Variable initialization and optional pull and build ONOS package
+    # 2 - package onos, clean by uninstalling onos, install ONOS, start cli
+    # 10 - Start mininet and verify topology
+    # 11 - Start Null Provider linear topology
+    # 110 - check log for errors
+    # 1000 - build flow batches
+    # 2100 - REST POST flow batches in multiple threads and check till all ADDED
+    # 3100 - REST DELETE flow batches in multiple threads and check till all REMOVED
+    -->
+
+    <!-- <testcases>1,10,100,1000,100,2000,100,110</testcases> -->
+    <testcases>1,2,10,100,1000,2100,100,3100,100,110,210</testcases>
+
+    <GLOBAL>
+        <maxNodes>1</maxNodes> # currently only runs in single node onos
+        <numSw>63</numSw> # Number of devices used in topology
+        <numThreads>4</numThreads> #Number of Threads to use for POST and DELETE
+        <cluster>BM</cluster>
+        <SLEEP>
+            <startup>15</startup>
+            <startMN>15</startMN>
+            <addFlow>10</addFlow>
+            <delFlow>10</delFlow>
+            <chkFlow>0.5</chkFlow>
+            <cfg>5</cfg>
+        </SLEEP>
+    </GLOBAL>
+
+    <CASE1>
+        <cellName>temp</cellName>
+        <cellApps>drivers</cellApps>
+        <gitPull>False</gitPull>
+        <gitBranch>master</gitBranch>
+    </CASE1>
+
+    <CASE2>
+        <incPackaging>true</incPackaging>
+    </CASE2>
+
+    <CASE10>
+        <app>org.onosproject.openflow-base</app>
+        <adaptiveFlowenabled>false</adaptiveFlowenabled>
+        <mnArgs> --topo linear,{} --switch ovsk,protocols=OpenFlow13 --controller remote,port=6653</mnArgs>
+    </CASE10>
+
+    <CASE11>
+        <nullTopo>linear</nullTopo>
+        <nullStart>true</nullStart>
+    </CASE11>
+
+    <CASE1000>
+        <batchSize>200</batchSize>
+        <batches>500</batches>
+    </CASE1000>
+
+    <CASE2100>
+        <numThreads>4</numThreads>
+        <RESTchkFlow>main.FALSE</RESTchkFlow>
+        <chkFlowTO>200</chkFlowTO>
+    </CASE2100>
+
+    <CASE3100>
+        <RESTchkFlow>main.FALSE</RESTchkFlow>
+        <chkFlowTO>200</chkFlowTO>
+    </CASE3100>
+
+</PARAMS>
diff --git a/TestON/tests/MISC/SCPFbatchFlowResp/SCPFbatchFlowResp.py b/TestON/tests/MISC/SCPFbatchFlowResp/SCPFbatchFlowResp.py
new file mode 100755
index 0000000..ca5e240
--- /dev/null
+++ b/TestON/tests/MISC/SCPFbatchFlowResp/SCPFbatchFlowResp.py
@@ -0,0 +1,518 @@
+class SCPFbatchFlowResp:
+    '''
+    Testing end-to-end ONOS response time from POST of batched flows to when ONOS returns
+    response confirmation of all flows ADDED; subsequently testing the response time from when REST DELETE to
+    ONOS confirmation of all flows REMOVED.
+    '''
+
+    def __init__( self ):
+        self.default = ''
+
+    def CASE1( self, main ):
+        import time
+        import os
+        import imp
+
+        """
+        - Construct tests variables
+        - GIT ( optional )
+            - Checkout ONOS master branch
+            - Pull latest ONOS code
+        - Building ONOS ( optional )
+            - Install ONOS package
+            - Build ONOS package
+        """
+
+        main.case( "Constructing test variables and building ONOS package" )
+        main.step( "Constructing test variables" )
+
+        # Test variables
+        main.testOnDirectory = os.path.dirname( os.getcwd ( ) )
+        main.cellName = main.params[ 'CASE1' ][ 'cellName' ]
+        main.apps = main.params[ 'CASE1' ][ 'cellApps' ]
+        gitBranch = main.params[ 'CASE1' ][ 'gitBranch' ]
+        gitPull = main.params[ 'CASE1' ][ 'gitPull' ]
+        main.maxNodes = int( main.params['GLOBAL'][ 'maxNodes' ] )
+        main.startUpSleep = float( main.params['GLOBAL'][ 'SLEEP' ][ 'startup' ] )
+        main.startMNSleep = float( main.params['GLOBAL'][ 'SLEEP' ][ 'startMN' ] )
+        main.addFlowSleep = float( main.params['GLOBAL'][ 'SLEEP' ][ 'addFlow' ] )
+        main.delFlowSleep = float( main.params['GLOBAL'][ 'SLEEP' ][ 'delFlow' ] )
+        main.chkFlowSleep = float( main.params['GLOBAL']['SLEEP']['chkFlow'])
+        main.cfgSleep = float( main.params['GLOBAL']['SLEEP']['cfg'])
+        main.numSw = int( main.params['GLOBAL']['numSw'])
+        main.numThreads = int( main.params['GLOBAL']['numThreads'] )
+        main.cellData = {} # for creating cell file
+        main.CLIs = []
+        main.ONOSip = []
+        main.ONOSip = main.ONOSbench.getOnosIps()
+        main.commit = main.ONOSbench.getVersion()
+        main.cluster = main.params['GLOBAL']['cluster']
+
+        # Assigning ONOS cli handles to a list
+        for i in range( 1,  main.maxNodes + 1 ):
+            main.CLIs.append( getattr( main, 'ONOScli' + str( i ) ) )
+
+
+        if main.CLIs:
+            stepResult = main.TRUE
+        else:
+            main.log.error( "Did not properly created list of ONOS CLI handle" )
+            stepResult = main.FALSE
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully construct " +
+                                        "test variables ",
+                                 onfail="Failed to construct test variables" )
+
+        if gitPull == 'True':
+            main.step( "Building ONOS in " + gitBranch + " branch" )
+            onosBuildResult = main.startUp.onosBuild( main, gitBranch )
+            stepResult = onosBuildResult
+            utilities.assert_equals( expect=main.TRUE,
+                                     actual=stepResult,
+                                     onpass="Successfully compiled " +
+                                            "latest ONOS",
+                                     onfail="Failed to compile " +
+                                            "latest ONOS" )
+        else:
+            main.log.warn( "Did not pull new code so skipping mvn " +
+                           "clean install" )
+
+    def CASE2( self, main ):
+        """
+        - Set up cell
+            - Create cell file
+            - Set cell file
+            - Verify cell file
+        - Kill ONOS process
+        - Uninstall ONOS cluster
+        - Verify ONOS start up
+        - Install ONOS cluster
+        - Connect to cli
+        """
+
+        main.numCtrls = int( main.maxNodes )
+
+        main.case( "Starting up " + str( main.numCtrls ) +
+                   " node(s) ONOS cluster" )
+
+        main.log.info( "Safety check, killing all ONOS processes" +
+                       " before initiating environment setup" )
+
+        tempOnosIp = []
+        for i in range( main.numCtrls ):
+            tempOnosIp.append( main.ONOSip[i] )
+
+        if main.params['CASE2']['incPackaging'] == "true":
+            main.step("Create onos cell file with: " + main.apps)
+            main.ONOSbench.createCellFile( main.ONOSbench.ip_address, "temp",
+                                       main.Mininet1.ip_address, main.apps, tempOnosIp )
+
+            main.step( "Apply cell to environment" )
+            cellResult = main.ONOSbench.setCell( "temp" )
+            verifyResult = main.ONOSbench.verifyCell()
+            stepResult = cellResult and verifyResult
+            utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully applied cell to " + \
+                                        "environment",
+                                 onfail="Failed to apply cell to environment " )
+
+
+            main.step( "Creating ONOS package" )
+            packageResult = main.ONOSbench.onosPackage(opTimeout=240)
+            stepResult = packageResult
+            utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully created ONOS package",
+                                 onfail="Failed to create ONOS package" )
+            time.sleep( main.startUpSleep )
+
+            main.step( "Uninstalling ONOS package" )
+            onosUninstallResult = main.TRUE
+            for i in range( main.numCtrls ):
+                onosUninstallResult = onosUninstallResult and \
+                    main.ONOSbench.onosUninstall( nodeIp=main.ONOSip[ i ] )
+            stepResult = onosUninstallResult
+            utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully uninstalled ONOS package",
+                                 onfail="Failed to uninstall ONOS package" )
+            time.sleep( main.startUpSleep )
+
+        else:
+            main.log.info("onos Packaging Skipped!")
+
+        main.step( "Installing ONOS package" )
+        onosInstallResult = main.TRUE
+        for i in range( main.numCtrls ):
+            onosInstallResult = onosInstallResult and \
+                    main.ONOSbench.onosInstall( node=main.ONOSip[ i ] )
+        stepResult = onosInstallResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully installed ONOS package",
+                                 onfail="Failed to install ONOS package" )
+        time.sleep( main.startUpSleep )
+
+        main.step( "Starting ONOS service" )
+        stopResult = main.TRUE
+        startResult = main.TRUE
+        onosIsUp = main.TRUE
+
+        for i in range( main.numCtrls ):
+            onosIsUp = onosIsUp and main.ONOSbench.isup( main.ONOSip[ i ] )
+        if onosIsUp == main.TRUE:
+            main.log.report( "ONOS instance is up and ready" )
+        else:
+            main.log.report( "ONOS instance may not be up, stop and " +
+                             "start ONOS again " )
+            for i in range( main.numCtrls ):
+                stopResult = stopResult and \
+                        main.ONOSbench.onosStop( main.ONOSip[ i ] )
+            for i in range( main.numCtrls ):
+                startResult = startResult and \
+                        main.ONOSbench.onosStart( main.ONOSip[ i ] )
+        stepResult = onosIsUp and stopResult and startResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="ONOS service is ready",
+                                 onfail="ONOS service did not start properly" )
+
+        main.step( "Start ONOS cli" )
+        cliResult = main.TRUE
+        for i in range( i, main.numCtrls ):
+            cliResult = cliResult and \
+                        main.CLIs[ i ].startOnosCli( ONOSIp=main.ONOSip[ i ] )
+            main.log.info("ONOSip is: " + main.ONOSip[i])
+        stepResult = cliResult
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully start ONOS cli",
+                                 onfail="Failed to start ONOS cli" )
+
+
+
+    def CASE10( self, main ):
+        '''
+            Start Mininet
+        '''
+        import time
+
+        main.case( "Enable openflow-base on onos and start Mininet." )
+
+        main.step("Activate openflow-base App")
+        app = main.params['CASE10']['app']
+        stepResult = main.ONOSbench.onosCli( ONOSIp = main.ONOSip[0],
+                                             cmdstr = "app activate " + app )
+        time.sleep(main.cfgSleep)
+        main.log.info(stepResult)
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully activate " + app,
+                                 onfail="Failed to activate app " + app )
+
+        time.sleep(main.cfgSleep)
+
+
+        main.step( "Disable AdaptiveFlowSampling ")
+        stepResult = main.ONOSbench.onosCfgSet( main.ONOSip[0], "org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider",
+                                   "adaptiveFlowSampling " + main.params['CASE10']['adaptiveFlowenabled'])
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="App Configuration Succeeded! ",
+                                 onfail="App Configuration Failed!" )
+        time.sleep(main.cfgSleep)
+
+        main.step( "Setup Mininet Linear Topology with " + str(main.numSw) + " switches" )
+        argStr = main.params['CASE10']['mnArgs'].format(main.numSw)
+        stepResult = main.Mininet1.startNet( args = argStr )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully loaded topology",
+                                 onfail="Failed to load topology" )
+
+        time.sleep( main.startMNSleep )
+
+        main.step( "Assign switches to controller" )
+        for i in range(1, main.numSw + 1):
+            main.Mininet1.assignSwController( "s" + str(i), main.ONOSip[0] )
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully assigned switch to controller",
+                                 onfail="Failed to assign switch to controller" )
+
+        main.deviceIdPrefix = "of:"
+
+        time.sleep( main.startMNSleep )
+
+    def CASE11( self, main ):
+        '''
+            Start Null Provider
+        '''
+        import time
+
+        main.case( "Setup Null Provider for linear Topology" )
+
+        main.step("Activate Null Provider App")
+        stepResult = main.ONOSbench.onosCli( ONOSIp = main.ONOSip[0],
+                                             cmdstr = "app activate org.onosproject.null" )
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Successfully activated org.onosproject.null",
+                                 onfail="Failed to activate org.onosproject.null" )
+        time.sleep( main.cfgSleep)
+
+        main.step( "Setup Null Provider Linear Topology with " + str(main.numSw) + " devices." )
+        r1 = main.ONOSbench.onosCfgSet( main.ONOSip[0], "org.onosproject.provider.nil.NullProviders", "deviceCount " + str(main.numSw))
+        r2 = main.ONOSbench.onosCfgSet( main.ONOSip[0], "org.onosproject.provider.nil.NullProviders", "topoShape " + main.params['CASE11']['nullTopo'] )
+        r3 = main.ONOSbench.onosCfgSet( main.ONOSip[0], "org.onosproject.provider.nil.NullProviders", "enabled " + main.params['CASE11']['nullStart'])
+        stepResult = r1 & r2 & r3
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="App Configuration Succeeded! ",
+                                 onfail="App Configuration Failed!" )
+        time.sleep( main.cfgSleep )
+
+        main.log.info("Check to make sure null providers are configured correctly.")
+        main.ONOSbench.handle.sendline("onos $OC1 summary")
+        stepResult = main.ONOSbench.handle.expect(":~")
+        main.log.info("ONOS Summary: " + main.ONOSbench.handle.before)
+
+        main.deviceIdPrefix = "null:"
+
+        time.sleep( main.startMNSleep )
+
+
+
+    def CASE1000( self, main ):
+        '''
+            create JSON object with batched flows
+        '''
+        import numpy
+        import time
+        from pprint import pprint
+
+        main.case( "Create a json object for the batched flows" )
+
+        main.step( "Parse batch creation information" )
+        main.batchSize = int(main.params['CASE1000']['batchSize'])
+        main.log.info("Number of flows in a batch is:" + str(main.batchSize))
+
+        main.flowJsonBatchList = []
+        startSw = 1
+
+        main.step("Creating a full list of batches")
+        for index in range(1, int(main.params['CASE1000']['batches']) + 1):
+            if startSw <= main.numSw:
+                ind = startSw
+            else:
+                startSw = 1
+                ind = startSw
+
+            main.log.info("Creating batch: " + str(index))
+            flowJsonBatch = main.ONOSrest.createFlowBatch( numSw = main.numSw,
+                                                           swIndex = ind,
+                                                           batchSize = main.batchSize,
+                                                           batchIndex = index,
+                                                           deviceIdpreFix=main.deviceIdPrefix,
+                                                           ingressPort = 2,
+                                                           egressPort = 3)
+            main.flowJsonBatchList.append(flowJsonBatch)
+
+            startSw += 1
+        main.log.info( "Number of items created in the batch list is: " + str(len(main.flowJsonBatchList)))
+
+    def CASE2100(self, main):
+        '''
+            Posting flow batches using threads
+        '''
+        main.case("Using REST API /flows/{} to post flow batch - multi-threads")
+        main.step("Using REST API /flows/{} to post flow batch - multi-threads")
+
+        from Queue import Queue
+        from threading import Thread
+        import time
+        import json
+
+        main.threadID = 0
+        main.addedBatchList = []
+        q = Queue()
+        tAllAdded = 0
+
+        def postWorker(id):
+            while True:
+                item = q.get()
+                #print json.dumps(item)
+                status,response = main.ONOSrest.sendFlowBatch(batch = item)
+                main.log.info("Thread {} is working on posting. ".format(id))
+                #print json.dumps(response)
+                main.addedBatchList.append(response[1])
+                q.task_done()
+
+        for i in range( int( main.params['CASE2100']['numThreads'])):
+            threadID = "ThreadID-" + str(i)
+            t = Thread(target = postWorker, name = threadID, args=(threadID,) )
+            t.daemon = True
+            t.start()
+
+        tStartPost = time.time()
+        for item in main.flowJsonBatchList:
+            q.put(item)
+
+        q.join()
+        tLastPostEnd = time.time()
+
+        main.step("Check to ensure all flows are in added state.")
+        #pprint(main.addedBatchList)
+        resp = main.FALSE
+        while resp != main.TRUE and ( tAllAdded - tLastPostEnd < int (main.params['CASE2100']['chkFlowTO']) ):
+            if main.params['CASE2100']['RESTchkFlow'] == main.TRUE:
+                resp = main.ONOSrest.checkFlowsState()
+            else:
+                handle = main.CLIs[0].flows(state = " |grep PEND|wc -l", jsonFormat=False)
+                main.log.info("handle returns PENDING flows: " + handle)
+                if handle == "0":
+                    resp = main.TRUE
+
+            time.sleep( main.chkFlowSleep )
+            tAllAdded = time.time()
+
+        if tAllAdded - tLastPostEnd >= int (main.params['CASE2100']['chkFlowTO']):
+            main.log.warn("ONOS Flows still in pending state after: {} seconds.".format(tAllAdded - tLastPostEnd))
+
+        main.numFlows = int(main.params['CASE1000']['batches']) *\
+                                                    int(main.params['CASE1000']['batchSize'])
+        main.log.info("Total number of flows: " + str (main.numFlows) )
+        main.elapsePOST = tLastPostEnd-tStartPost
+        main.log.info("Total POST elapse time: " + str( main.elapsePOST ) )
+        main.log.info("Rate of ADD Controller response: " + str(main.numFlows / ( main.elapsePOST )))
+
+        main.POSTtoCONFRM = tAllAdded - tLastPostEnd
+        main.log.info("Elapse time from end of last REST POST to Flows in ADDED state: " +\
+                      str( main.POSTtoCONFRM ))
+        main.log.info("Rate of Confirmed Batch Flow ADD is (flows/sec): " +
+                      str( main.numFlows / main.POSTtoCONFRM ))
+        main.log.info("Number of flow Batches in the addedBatchList is: " +
+                      str( len(main.addedBatchList)))
+
+    def CASE3100(self, main):
+        '''
+            DELETE flow batches using threads
+        '''
+        main.case("Using REST API /flows/{} to delete flow batch - multi-threads")
+        main.step("Using REST API /flows/{} to delete flow batch - multi-threads")
+
+        from Queue import Queue
+        from threading import Thread
+        import time
+        import json
+
+        main.threadID = 0
+        q = Queue()
+        tAllRemoved = 0
+
+        main.log.info("Number of flow batches at start of remove: " + str( len( main.addedBatchList)))
+        def removeWorker(id):
+            while True:
+                item = q.get()
+                response = main.ONOSrest.removeFlowBatch(batch = json.loads(item) )
+                main.log.info("Thread {} is working on deleting. ".format(id))
+                q.task_done()
+
+        for i in range( int( main.params['CASE2100']['numThreads'])):
+            threadID = "ThreadID-" + str(i)
+            t = Thread(target = removeWorker, name = threadID, args=(threadID,) )
+            t.daemon = True
+            t.start()
+
+        tStartDelete = time.time()
+        for item in main.addedBatchList:
+            q.put(item)
+
+        q.join()
+        tLastDeleteEnd = time.time()
+        main.log.info("Number of flow batches at end of remove: " + str( len( main.addedBatchList)))
+
+        main.step("Check to ensure all flows are in added state.")
+        #pprint(main.addedBatchList)
+        resp = main.FALSE
+        while resp != main.TRUE and ( tAllRemoved - tLastDeleteEnd < int (main.params['CASE3100']['chkFlowTO']) ):
+            if main.params['CASE3100']['RESTchkFlow'] == main.TRUE:
+                resp = main.ONOSrest.checkFlowsState()
+            else:
+                handle = main.CLIs[0].flows(state = " |grep PEND|wc -l", jsonFormat=False)
+                main.log.info("handle returns PENDING flows: " + handle)
+                if handle == "0":
+                    resp = main.TRUE
+            time.sleep( main.chkFlowSleep )
+            tAllRemoved = time.time()
+
+        if tLastDeleteEnd - tLastDeleteEnd >= int (main.params['CASE2100']['chkFlowTO']):
+            main.log.warn("ONOS Flows still in pending state after: {} seconds.".format(tAllRemoved - tLastDeleteEnd))
+
+        main.numFlows = int(main.params['CASE1000']['batches']) *\
+                                                    int(main.params['CASE1000']['batchSize'])
+        main.log.info("Total number of flows: " + str (main.numFlows) )
+        main.elapseDELETE = tLastDeleteEnd-tStartDelete
+        main.log.info("Total DELETE elapse time: " + str( main.elapseDELETE ))
+        main.log.info("Rate of DELETE Controller response: " + str(main.numFlows / ( main.elapseDELETE )))
+
+        main.DELtoCONFRM = tAllRemoved - tLastDeleteEnd
+        main.log.info("Elapse time from end of last REST DELETE to Flows in REMOVED state: " +\
+                      str( main.DELtoCONFRM ))
+        main.log.info("Rate of Confirmed Batch Flow REMOVED is (flows/sec): " + str( main.numFlows / main.DELtoCONFRM))
+
+    def CASE100(self,main):
+        from pprint import pprint
+
+        main.case( "Check to ensure onos flows." )
+
+        resp = main.ONOSrest.checkFlowsState()
+        #pprint(resp)
+
+    def CASE210(self,main):
+        main.case("Log test results to a data file")
+        main.step("Write test resulted data to a data file")
+        main.scale = main.maxNodes
+
+        try:
+            dbFileName="/tmp/SCPFbatchFlowRespData"
+            dbfile = open(dbFileName, "w+")
+            temp = "'" + main.commit + "',"
+            temp += "'" + str( main.scale ) + "',"
+            temp += "'" + main.cluster + "',"
+            temp += "'" + str( main.elapsePOST ) + "',"
+            temp += "'" + str( main.POSTtoCONFRM ) + "',"
+            temp += "'" + str ( main.elapseDELETE ) + "',"
+            temp += "'" + str ( main.DELtoCONFRM ) + "'\n"
+            dbfile.write( temp )
+            dbfile.close()
+            stepResult = main.TRUE
+        except IOError:
+            main.log.warn("Error opening " + dbFileName + " to write results.")
+            stepResult = main.FALSE
+
+        utilities.assert_equals( expect=main.TRUE,
+                                 actual=stepResult,
+                                 onpass="Succeeded to write results to datafile",
+                                 onfail="Failed to write results to datafile " )
+        
+    def CASE110( self, main ):
+        '''
+        Report errors/warnings/exceptions
+        '''
+        main.log.info("Error report: \n" )
+        main.ONOSbench.logReport( main.ONOSip[ 0 ],
+                                  [ "INFO",
+                                    "FOLLOWER",
+                                    "WARN",
+                                    "flow",
+                                    "ERROR",
+                                    "Except" ],
+                                  "s" )
+        #main.stop()
+
diff --git a/TestON/tests/MISC/SCPFbatchFlowResp/SCPFbatchFlowResp.topo b/TestON/tests/MISC/SCPFbatchFlowResp/SCPFbatchFlowResp.topo
new file mode 100755
index 0000000..0e3543e
--- /dev/null
+++ b/TestON/tests/MISC/SCPFbatchFlowResp/SCPFbatchFlowResp.topo
@@ -0,0 +1,46 @@
+<TOPOLOGY>
+    <COMPONENT>
+
+        <ONOSbench>
+            <host>localhost</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosDriver</type>
+            <connect_order>1</connect_order>
+            <COMPONENTS>
+                <home>~/Projects/onos</home>
+            </COMPONENTS>
+        </ONOSbench>
+
+        <ONOScli1>
+            <host>localhost</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosCliDriver</type>
+            <connect_order>2</connect_order>
+            <COMPONENTS>
+            </COMPONENTS>
+        </ONOScli1>
+
+        <Mininet1>
+            <host>localhost</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>MininetCliDriver</type>
+            <connect_order>5</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </Mininet1>
+
+        <ONOSrest>
+            <host>OC1</host>
+            <port>8181</port>
+            <user>onos</user>
+            <password>rocks</password>
+            <type>OnosRestDriver</type>
+            <connect_order>6</connect_order>
+            <COMPONENTS>
+            </COMPONENTS>
+        </ONOSrest>
+
+    </COMPONENT>
+</TOPOLOGY>
diff --git a/TestON/tests/MISC/SCPFbatchFlowResp/__init__.py b/TestON/tests/MISC/SCPFbatchFlowResp/__init__.py
new file mode 100755
index 0000000..e69de29
--- /dev/null
+++ b/TestON/tests/MISC/SCPFbatchFlowResp/__init__.py
diff --git a/TestON/tests/SCPF/SCPFscaleTopo/SCPFscaleTopo.params b/TestON/tests/SCPF/SCPFscaleTopo/SCPFscaleTopo.params
index b44a3c0..90ec8bf 100755
--- a/TestON/tests/SCPF/SCPFscaleTopo/SCPFscaleTopo.params
+++ b/TestON/tests/SCPF/SCPFscaleTopo/SCPFscaleTopo.params
@@ -37,7 +37,7 @@
         <balance>10</balance>
         <nodeSleep>10</nodeSleep>
         <pingall>15</pingall>
-        <MNsleep>120</MNsleep>
+        <MNsleep>60</MNsleep>
     </SLEEP>
 
     <TIMEOUT>
diff --git a/TestON/tests/SCPF/SCPFscaleTopo/dependencies/topo.py b/TestON/tests/SCPF/SCPFscaleTopo/dependencies/topo.py
index 7a8c0c6..f1101fe 100644
--- a/TestON/tests/SCPF/SCPFscaleTopo/dependencies/topo.py
+++ b/TestON/tests/SCPF/SCPFscaleTopo/dependencies/topo.py
@@ -99,6 +99,7 @@
 
 def sendArpPackage( main, hostList ):
     import json
+    import time
     """
         send arping package from host
         return the total hosts number from Onos
@@ -107,7 +108,8 @@
     if isinstance(hostList, list):
         threads = []
         for h in hostList:
-            main.Mininet1.arping( srcHost=h, dstHost="10.0.0.1", output=main.FALSE )
+            main.Mininet1.arping( srcHost=h, dstHost="10.0.0.1", output=main.FALSE, noResult=True )
+            time.sleep(1)
     else:
         main.Mininet1.arping(srcHost=hostList)
     summaryStr = json.loads( main.CLIs[0].summary().encode() )
diff --git a/TestON/tests/USECASE/USECASE_SegmentRouting/4x4.json b/TestON/tests/USECASE/USECASE_SegmentRouting/4x4.json
new file mode 100644
index 0000000..dee6bc3
--- /dev/null
+++ b/TestON/tests/USECASE/USECASE_SegmentRouting/4x4.json
@@ -0,0 +1,200 @@
+{
+    "ports" : {
+    "of:0000000000000001/5" : {
+        "interfaces" : [
+        {
+            "ips" : [ "10.0.1.254/24" ]
+        }
+        ]
+    },
+    "of:0000000000000001/6" : {
+        "interfaces" : [
+        {
+            "ips" : [ "10.0.1.254/24" ]
+        }
+        ]
+    },
+    "of:0000000000000002/5" : {
+        "interfaces" : [
+        {
+            "ips" : [ "10.0.2.254/24" ]
+        }
+        ]
+    },
+    "of:0000000000000002/6" : {
+        "interfaces" : [
+        {
+            "ips" : [ "10.0.2.254/24" ]
+        }
+        ]
+    },
+    "of:0000000000000003/5" : {
+        "interfaces" : [
+        {
+            "ips" : [ "10.0.3.254/24" ]
+        }
+        ]
+    },
+    "of:0000000000000003/6" : {
+        "interfaces" : [
+        {
+            "ips" : [ "10.0.3.254/24" ]
+        }
+        ]
+    },
+    "of:0000000000000004/5" : {
+        "interfaces" : [
+        {
+            "ips" : [ "10.0.4.254/24" ]
+        }
+        ]
+    },
+    "of:0000000000000004/6" : {
+        "interfaces" : [
+        {
+            "ips" : [ "10.0.4.254/24"]
+        }
+        ]
+    }
+    },
+    "devices" : {
+        "of:0000000000000001" : {
+            "basic":{ "driver" : "ofdpa-cpqd" },
+            "segmentrouting" : {
+                "name" : "Leaf-R1",
+                "nodeSid" : 1,
+                "routerIp" : "192.168.0.1",
+                "routerMac" : "00:00:00:00:00:01",
+                "isEdgeRouter" : true,
+                "adjacencySids" : []
+            }
+        },
+        "of:0000000000000002" : {
+            "basic":{ "driver" : "ofdpa-cpqd" },
+            "segmentrouting" : {
+                "name" : "Leaf-R2",
+                "nodeSid" : 2,
+                "routerIp" : "192.168.0.2",
+                "routerMac" : "00:00:00:00:00:02",
+                "isEdgeRouter" : true,
+                "adjacencySids" : []
+            }
+        },
+        "of:0000000000000003" : {
+            "basic" :{ "driver" : "ofdpa-cpqd" },
+            "segmentrouting" : {
+                "name" : "Leaf-R3",
+                "nodeSid" : 3,
+                "routerIp" : "192.168.0.3",
+                "routerMac" : "00:00:00:00:00:03",
+                "isEdgeRouter" : true,
+                "adjacencySids" : []
+            }
+        },
+        "of:0000000000000004" : {
+            "basic":{ "driver" : "ofdpa-cpqd" },
+            "segmentrouting" : {
+                "name" : "Leaf-R4",
+                "nodeSid" : 4,
+                "routerIp" : "192.168.0.4",
+                "routerMac" : "00:00:00:00:00:04",
+                "isEdgeRouter" : true,
+                "adjacencySids" : []
+            }
+        },
+        "of:0000000000000101" : {
+            "basic":{ "driver" : "ofdpa-cpqd" },
+            "segmentrouting" : {
+                "name" : "Spine-R1",
+                "nodeSid" : 101,
+                "routerIp" : "192.168.0.101",
+                "routerMac" : "00:00:00:00:01:01",
+                "isEdgeRouter" : false,
+                "adjacencySids" : []
+            }
+        },
+        "of:0000000000000102" : {
+            "basic":{ "driver" : "ofdpa-cpqd" },
+            "segmentrouting" : {
+                "name" : "Spine-R2",
+                "nodeSid" : 102,
+                "routerIp" : "192.168.0.102",
+                "routerMac" : "00:00:00:00:01:02",
+                "isEdgeRouter" : false,
+                "adjacencySids" : []
+            }
+        },
+        "of:0000000000000103" : {
+            "basic":{ "driver" : "ofdpa-cpqd" },
+            "segmentrouting" : {
+                "name" : "Spine-R3",
+                "nodeSid" : 103,
+                "routerIp" : "192.168.0.103",
+                "routerMac" : "00:00:00:00:01:03",
+                "isEdgeRouter" : false,
+                "adjacencySids" : []
+            }
+        },
+        "of:0000000000000104" : {
+            "basic":{ "driver" : "ofdpa-cpqd" },
+            "segmentrouting" : {
+                "name" : "Spine-R4",
+                "nodeSid" : 104,
+                "routerIp" : "192.168.0.104",
+                "routerMac" : "00:00:00:00:01:04",
+                "isEdgeRouter" : false,
+                "adjacencySids" : []
+            }
+        }
+    },
+    "hosts" : {
+        "00:00:00:00:00:01/-1" : {
+            "basic": {
+                "ips": ["10.0.1.1"],
+                "location": "of:0000000000000001/5"
+            }
+        },
+        "00:00:00:00:00:02/-1" : {
+            "basic": {
+                "ips": ["10.0.1.2"],
+                "location": "of:0000000000000001/6"
+            }
+        },
+        "00:00:00:00:00:03/-1" : {
+            "basic": {
+                "ips": ["10.0.2.1"],
+                "location": "of:0000000000000002/5"
+            }
+        },
+        "00:00:00:00:00:04/-1" : {
+            "basic": {
+                "ips": ["10.0.2.2"],
+                "location": "of:0000000000000002/6"
+            }
+        },
+        "00:00:00:00:00:05/-1" : {
+            "basic": {
+                "ips": ["10.0.3.1"],
+                "location": "of:0000000000000003/5"
+            }
+        },
+        "00:00:00:00:00:06/-1" : {
+            "basic": {
+                "ips": ["10.0.3.2"],
+                "location": "of:0000000000000003/6"
+            }
+        },
+        "00:00:00:00:00:07/-1" : {
+            "basic": {
+                "ips": ["10.0.4.1"],
+                "location": "of:0000000000000004/5"
+            }
+        },
+        "00:00:00:00:00:08/-1" : {
+            "basic": {
+                "ips": ["10.0.4.2"],
+                "location": "of:0000000000000004/6"
+            }
+        }
+    }
+}
diff --git a/TestON/tests/USECASE/USECASE_SegmentRouting/USECASE_SegmentRouting.params b/TestON/tests/USECASE/USECASE_SegmentRouting/USECASE_SegmentRouting.params
index 0ceb4f2..eb55d5f 100755
--- a/TestON/tests/USECASE/USECASE_SegmentRouting/USECASE_SegmentRouting.params
+++ b/TestON/tests/USECASE/USECASE_SegmentRouting/USECASE_SegmentRouting.params
@@ -1,6 +1,6 @@
 <PARAMS>
 
-    <testcases>1,2,11,9, 2,11,9</testcases>
+    <testcases>1,2,11,9,2,11,9,2,11,9,2,11,9</testcases>
 
     <SCALE>
         <size>1</size>
diff --git a/TestON/tests/USECASE/USECASE_SegmentRouting/USECASE_SegmentRouting.py b/TestON/tests/USECASE/USECASE_SegmentRouting/USECASE_SegmentRouting.py
index c95e232..7eb4dd7 100644
--- a/TestON/tests/USECASE/USECASE_SegmentRouting/USECASE_SegmentRouting.py
+++ b/TestON/tests/USECASE/USECASE_SegmentRouting/USECASE_SegmentRouting.py
@@ -29,14 +29,16 @@
         # Test variables
         main.cellName = main.params[ 'ENV' ][ 'cellName' ]
         main.apps = main.params[ 'ENV' ][ 'cellApps' ]
-        main.diff = ( main.params[ 'ENV' ][ 'diffApps' ] ).split(";")
+        main.diff = []
+        main.diff.extend(( main.params[ 'ENV' ][ 'diffApps' ] ).split(";"))
+        main.diff.extend(( main.params[ 'ENV' ][ 'diffApps' ] ).split(";"))
         gitBranch = main.params[ 'GIT' ][ 'branch' ]
         main.path = os.path.dirname( main.testFile )
         main.dependencyPath = main.path + "/dependencies/"
         main.topology = main.params[ 'DEPENDENCY' ][ 'topology' ]
         #main.json = ["4x4"]
-        main.json = ["2x2", "2x2"]
-        main.args = [" ", " "]
+        main.json = ["2x2", "2x2","4x4","4x4"]
+        main.args = [" ", " ", " --spine 4 --leaf 4 ", " --spine 4 --leaf 4 "]
         #main.args = [" --spine 4 --leaf 4 "]
         main.scale = ( main.params[ 'SCALE' ][ 'size' ] ).split( "," )
         main.maxNodes = int( main.params[ 'SCALE' ][ 'max' ] )
@@ -147,11 +149,11 @@
         main.jsonFile=main.json.pop(0)
         main.ONOSbench.handle.sendline( "cp "+main.path+"/"+main.jsonFile+".json ~/onos/tools/package/config/network-cfg.json")
         packageResult = main.ONOSbench.onosPackage()
-        stepResult = packageResult
-        utilities.assert_equals( expect=main.TRUE,
-                                 actual=stepResult,
-                                 onpass="Successfully created ONOS package",
-                                 onfail="Failed to create ONOS package" )
+        #stepResult = packageResult
+        #utilities.assert_equals( expect=main.TRUE,
+        #                         actual=stepResult,
+        #                         onpass="Successfully created ONOS package",
+        #                         onfail="Failed to create ONOS package" )
 
         time.sleep( main.startUpSleep )
 
@@ -196,8 +198,8 @@
             Report errors/warnings/exceptions
         '''
         main.case( "Logging test for " + main.jsonFile )
-        if len(main.json) > 0 :
-            main.ONOSbench.cpLogsToDir("/opt/onos/log/karaf.log",main.logdir, 
+        #if len(main.json) > 0 :
+        main.ONOSbench.cpLogsToDir("/opt/onos/log/karaf.log",main.logdir, 
                            copyFileName="karaf.log."+main.jsonFile+str(len(main.json)))
         #main.ONOSbench.logReport( main.ONOSip[ 0 ],
         #                          [ "INFO" ],