add test environment - onos cluster, 2 BGP speakers, FSFW
Change-Id: If3b83bd5e4b9fb3a2b3d435e2e41efc3a09693d6
diff --git a/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/Functions.py b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/Functions.py
new file mode 100644
index 0000000..8d4007a
--- /dev/null
+++ b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/Functions.py
@@ -0,0 +1,178 @@
+
+def checkRouteNum( main, routeNumExpected, ONOScli = "ONOScli1" ):
+ main.step( "Check routes installed" )
+ main.log.info( "Route number expected:" )
+ main.log.info( routeNumExpected )
+ main.log.info( "Route number from ONOS CLI:" )
+
+ if ONOScli == "ONOScli1":
+ routeNumActual = main.ONOScli1.ipv4RouteNumber()
+ else:
+ routeNumActual = main.ONOScli2.ipv4RouteNumber()
+
+ main.log.info( routeNumActual )
+ utilities.assertEquals( \
+ expect = routeNumExpected, actual = routeNumActual,
+ onpass = "Route number is correct!",
+ onfail = "Route number is wrong!" )
+
+def checkM2SintentNum( main, intentNumExpected, ONOScli = "ONOScli1" ):
+ main.step( "Check M2S intents installed" )
+ main.log.info( "Intent number expected:" )
+ main.log.info( intentNumExpected )
+ main.log.info( "Intent number from ONOS CLI:" )
+ if ONOScli == "ONOScli1":
+ jsonResult = main.ONOScli1.intents( jsonFormat = True, summary = True,
+ TYPE = "multiPointToSinglePoint" )
+ else:
+ jsonResult = main.ONOScli2.intents( jsonFormat = True, summary = True,
+ TYPE = "multiPointToSinglePoint" )
+ intentNumActual = jsonResult['installed']
+ main.log.info( intentNumActual )
+ utilities.assertEquals( \
+ expect = intentNumExpected, actual = intentNumActual,
+ onpass = "M2S intent number is correct!",
+ onfail = "M2S intent number is wrong!" )
+
+def checkP2PintentNum( main, intentNumExpected, ONOScli = "ONOScli1" ):
+ main.step( "Check P2P intents installed" )
+ main.log.info( "Intent number expected:" )
+ main.log.info( intentNumExpected )
+ main.log.info( "Intent number from ONOS CLI:" )
+ if ONOScli == "ONOScli1":
+ jsonResult = main.ONOScli1.intents( jsonFormat = True, summary = True,
+ TYPE = "pointToPoint" )
+ else:
+ jsonResult = main.ONOScli2.intents( jsonFormat = True, summary = True,
+ TYPE = "pointToPoint" )
+ intentNumActual = jsonResult['installed']
+ main.log.info( intentNumActual )
+ utilities.assertEquals( \
+ expect = intentNumExpected, actual = intentNumActual,
+ onpass = "P2P intent number is correct!",
+ onfail = "P2P intent number is wrong!" )
+
+def checkFlowNum( main, switch, flowNumExpected ):
+ main.step( "Check flow entry number in " + switch )
+ main.log.info( "Flow number expected:" )
+ main.log.info( flowNumExpected )
+ main.log.info( "Flow number actual:" )
+ flowNumActual = main.Mininet.getSwitchFlowCount( switch )
+ main.log.info( flowNumActual )
+ utilities.assertEquals( \
+ expect = flowNumExpected, actual = flowNumActual,
+ onpass = "Flow number in " + switch + " is correct!",
+ onfail = "Flow number in " + switch + " is wrong!" )
+
+
+def pingSpeakerToPeer( main, speakers = ["speaker1"],
+ peers = ["peer64514", "peer64515", "peer64516"],
+ expectAllSuccess = True ):
+ """
+ Carry out ping test between each BGP speaker and peer pair
+ Optional argument:
+ * speakers - BGP speakers
+ * peers - BGP peers
+ * expectAllSuccess - boolean indicating if you expect all results
+ succeed if True, otherwise expect all results fail if False
+ """
+ if len( speakers ) == 0:
+ main.log.error( "Parameter speakers can not be empty." )
+ main.cleanup()
+ main.exit()
+ if len( peers ) == 0:
+ main.log.error( "Parameter speakers can not be empty." )
+ main.cleanup()
+ main.exit()
+
+ if expectAllSuccess:
+ main.step( "BGP speakers ping peers, expect all tests to succeed" )
+ else:
+ main.step( "BGP speakers ping peers, expect all tests to fail" )
+
+ result = True
+ if expectAllSuccess:
+ for speaker in speakers:
+ for peer in peers:
+ tmpResult = main.Mininet.pingHost( src = speaker,
+ target = peer )
+ result = result and ( tmpResult == main.TRUE )
+ else:
+ for speaker in speakers:
+ for peer in peers:
+ tmpResult = main.Mininet.pingHost( src = speaker,
+ target = peer )
+
+ utilities.assert_equals( expect = True, actual = result,
+ onpass = "Ping test results are expected",
+ onfail = "Ping test results are Not expected" )
+
+ if result == False:
+ main.cleanup()
+ main.exit()
+
+
+def pingHostToHost( main, hosts = ["host64514", "host64515", "host64516"],
+ expectAllSuccess = True ):
+ """
+ Carry out ping test between each BGP host pair
+ Optional argument:
+ * hosts - hosts behind BGP peer routers
+ * expectAllSuccess - boolean indicating if you expect all results
+ succeed if True, otherwise expect all results fail if False
+ """
+ main.step( "Check ping between each host pair" )
+ if len( hosts ) == 0:
+ main.log.error( "Parameter hosts can not be empty." )
+ main.cleanup()
+ main.exit()
+
+ result = True
+ if expectAllSuccess:
+ for srcHost in hosts:
+ for targetHost in hosts:
+ if srcHost != targetHost:
+ tmpResult = main.Mininet.pingHost( src = srcHost,
+ target = targetHost )
+ result = result and ( tmpResult == main.TRUE )
+ else:
+ for srcHost in hosts:
+ for targetHost in hosts:
+ if srcHost != targetHost:
+ tmpResult = main.Mininet.pingHost( src = srcHost,
+ target = targetHost )
+ result = result and ( tmpResult == main.FALSE )
+
+ utilities.assert_equals( expect = True, actual = result,
+ onpass = "Ping test results are expected",
+ onfail = "Ping test results are Not expected" )
+
+ '''
+ if result == False:
+ main.cleanup()
+ main.exit()
+ '''
+
+
+def setupTunnel( main, srcIp, srcPort, dstIp, dstPort ):
+ """
+ Create a tunnel from Mininet host to host outside Mininet
+ """
+ main.step( "Set up tunnel from Mininet node " +
+ str( srcIp ) + ":" + str( srcPort ) + " to ONOS node "
+ + str(dstIp) + ":" + str(dstPort) )
+ forwarding = '%s:%s:%s:%s' % ( srcIp, srcPort, dstIp, dstPort )
+ command = 'ssh -nNT -o "PasswordAuthentication no" \
+ -o "StrictHostKeyChecking no" -l sdn -L %s %s & ' % ( forwarding, dstIp )
+
+
+ tunnelResult = main.TRUE
+ tunnelResult = main.Mininet.node( "root", command )
+ utilities.assert_equals( expect = True,
+ actual = ( "PasswordAuthentication" in tunnelResult ),
+ onpass = "Created tunnel succeeded",
+ onfail = "Create tunnel failed" )
+ if ( "PasswordAuthentication" not in tunnelResult ) :
+ main.cleanup()
+ main.exit()
+
diff --git a/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/USECASE_SdnipI2MN_Cluster_fsfw.py b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/USECASE_SdnipI2MN_Cluster_fsfw.py
new file mode 100644
index 0000000..d034371
--- /dev/null
+++ b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/USECASE_SdnipI2MN_Cluster_fsfw.py
@@ -0,0 +1,422 @@
+#!/usr/bin/python
+
+"""
+Set up the SDN-IP topology as same as it on Internet2
+"""
+
+"""
+AS 64513, (SDN AS)
+AS 64514, reachable by 10.0.4.1, 10.0.14.1
+AS 64515, reachable by 10.0.5.1, 10.0.15.1
+AS 64516, reachable by 10.0.6.1, 10.0.16.1
+"""
+
+from mininet.net import Mininet
+from mininet.node import Controller, RemoteController
+from mininet.log import setLogLevel, info
+from mininet.cli import CLI
+from mininet.topo import Topo
+from mininet.util import quietRun
+from mininet.moduledeps import pathCheck
+
+import os.path
+import time
+from subprocess import Popen, STDOUT, PIPE
+
+QUAGGA_DIR = '/usr/lib/quagga'
+QUAGGA_RUN_DIR = '/usr/local/var/run/quagga'
+QUAGGA_CONFIG_DIR = '~/OnosSystemTest/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/'
+numSw = 39
+
+# net = Mininet( controller = RemoteController )
+
+class SDNTopo( Topo ):
+ "SDN Topology"
+
+ def __init__( self, *args, **kwargs ):
+
+ Topo.__init__( self, *args, **kwargs )
+
+ # BGP peer hosts
+ peer64514 = self.addHost( 'peer64514' )
+ peer64515 = self.addHost( 'peer64515' )
+ peer64516 = self.addHost( 'peer64516' )
+
+ '''
+ sw1 = self.addSwitch( 'SEAT', dpid = '00000000000000a1' )
+ sw2 = self.addSwitch( 'PORT', dpid = '00000000000000a2' )
+ sw3 = self.addSwitch( 'SUNN', dpid = '00000000000000a3' )
+ sw4 = self.addSwitch( 'RENO', dpid = '00000000000000a4' )
+ sw5 = self.addSwitch( 'LOSA', dpid = '00000000000000a5' )
+ sw6 = self.addSwitch( 'MISS', dpid = '00000000000000a6' )
+ sw7 = self.addSwitch( 'LASV', dpid = '00000000000000a7' )
+ sw8 = self.addSwitch( 'SALT', dpid = '00000000000000a8' )
+ sw9 = self.addSwitch( 'PHOE', dpid = '00000000000000a9' )
+ sw10 = self.addSwitch( 'TUCS', dpid = '0000000000000a10' )
+ sw11 = self.addSwitch( 'DENV', dpid = '0000000000000a11' )
+ sw12 = self.addSwitch( 'ELPA', dpid = '0000000000000a12' )
+ sw13 = self.addSwitch( 'MINN', dpid = '0000000000000a13' )
+ sw14 = self.addSwitch( 'KANS', dpid = '0000000000000a14' )
+ sw15 = self.addSwitch( 'TULS', dpid = '0000000000000a15' )
+ sw16 = self.addSwitch( 'DALL', dpid = '0000000000000a16' )
+ sw17 = self.addSwitch( 'HOUH', dpid = '0000000000000a17' )
+ sw18 = self.addSwitch( 'COLU', dpid = '0000000000000a18' )
+ sw19 = self.addSwitch( 'JCSN', dpid = '0000000000000a19' )
+ sw20 = self.addSwitch( 'BATO', dpid = '0000000000000a20' )
+ sw21 = self.addSwitch( 'EQCH', dpid = '0000000000000a21' )
+ sw22 = self.addSwitch( 'STAR', dpid = '0000000000000a22' )
+ sw23 = self.addSwitch( 'CHIC', dpid = '0000000000000a23' )
+ sw24 = self.addSwitch( 'INDI', dpid = '0000000000000a24' )
+ sw25 = self.addSwitch( 'CINC', dpid = '0000000000000a25' )
+ sw26 = self.addSwitch( 'LOUI', dpid = '0000000000000a26' )
+ sw27 = self.addSwitch( 'ATLA', dpid = '0000000000000a27' )
+ sw28 = self.addSwitch( 'JACK', dpid = '0000000000000a28' )
+ sw29 = self.addSwitch( 'CLEV', dpid = '0000000000000a29' )
+ sw30 = self.addSwitch( 'PITT', dpid = '0000000000000a30' )
+ sw31 = self.addSwitch( 'ASHB', dpid = '0000000000000a31' )
+ sw32 = self.addSwitch( 'WASH', dpid = '0000000000000a32' )
+ sw33 = self.addSwitch( 'RALE', dpid = '0000000000000a33' )
+ sw34 = self.addSwitch( 'CHAR', dpid = '0000000000000a34' )
+ sw35 = self.addSwitch( 'ALBA', dpid = '0000000000000a35' )
+ sw36 = self.addSwitch( 'BOST', dpid = '0000000000000a36' )
+ sw37 = self.addSwitch( 'HART', dpid = '0000000000000a37' )
+ sw38 = self.addSwitch( 'NEWY', dpid = '0000000000000a38' )
+ sw39 = self.addSwitch( 'PHIL', dpid = '0000000000000a39' )
+ '''
+ sw1 = self.addSwitch( 'sw1', dpid = '00000000000000a1' )
+ sw2 = self.addSwitch( 'sw2', dpid = '00000000000000a2' )
+ sw3 = self.addSwitch( 'sw3', dpid = '00000000000000a3' )
+ sw4 = self.addSwitch( 'sw4', dpid = '00000000000000a4' )
+ sw5 = self.addSwitch( 'sw5', dpid = '00000000000000a5' )
+ sw6 = self.addSwitch( 'sw6', dpid = '00000000000000a6' )
+ sw7 = self.addSwitch( 'sw7', dpid = '00000000000000a7' )
+ sw8 = self.addSwitch( 'sw8', dpid = '00000000000000a8' )
+ sw9 = self.addSwitch( 'sw9', dpid = '00000000000000a9' )
+ sw10 = self.addSwitch( 'sw10', dpid = '0000000000000a10' )
+ sw11 = self.addSwitch( 'sw11', dpid = '0000000000000a11' )
+ sw12 = self.addSwitch( 'sw12', dpid = '0000000000000a12' )
+ sw13 = self.addSwitch( 'sw13', dpid = '0000000000000a13' )
+ sw14 = self.addSwitch( 'sw14', dpid = '0000000000000a14' )
+ sw15 = self.addSwitch( 'sw15', dpid = '0000000000000a15' )
+ sw16 = self.addSwitch( 'sw16', dpid = '0000000000000a16' )
+ sw17 = self.addSwitch( 'sw17', dpid = '0000000000000a17' )
+ sw18 = self.addSwitch( 'sw18', dpid = '0000000000000a18' )
+ sw19 = self.addSwitch( 'sw19', dpid = '0000000000000a19' )
+ sw20 = self.addSwitch( 'sw20', dpid = '0000000000000a20' )
+ sw21 = self.addSwitch( 'sw21', dpid = '0000000000000a21' )
+ sw22 = self.addSwitch( 'sw22', dpid = '0000000000000a22' )
+ sw23 = self.addSwitch( 'sw23', dpid = '0000000000000a23' )
+ sw24 = self.addSwitch( 'sw24', dpid = '0000000000000a24' )
+ sw25 = self.addSwitch( 'sw25', dpid = '0000000000000a25' )
+ sw26 = self.addSwitch( 'sw26', dpid = '0000000000000a26' )
+ sw27 = self.addSwitch( 'sw27', dpid = '0000000000000a27' )
+ sw28 = self.addSwitch( 'sw28', dpid = '0000000000000a28' )
+ sw29 = self.addSwitch( 'sw29', dpid = '0000000000000a29' )
+ sw30 = self.addSwitch( 'sw30', dpid = '0000000000000a30' )
+ sw31 = self.addSwitch( 'sw31', dpid = '0000000000000a31' )
+ sw32 = self.addSwitch( 'sw32', dpid = '0000000000000a32' )
+ sw33 = self.addSwitch( 'sw33', dpid = '0000000000000a33' )
+ sw34 = self.addSwitch( 'sw34', dpid = '0000000000000a34' )
+ sw35 = self.addSwitch( 'sw35', dpid = '0000000000000a35' )
+ sw36 = self.addSwitch( 'sw36', dpid = '0000000000000a36' )
+ sw37 = self.addSwitch( 'sw37', dpid = '0000000000000a37' )
+ sw38 = self.addSwitch( 'sw38', dpid = '0000000000000a38' )
+ sw39 = self.addSwitch( 'sw39', dpid = '0000000000000a39' )
+
+
+ # Add a layer2 switch for control plane connectivity
+ # This switch isn't part of the SDN topology
+ # We'll use the ovs-controller to turn this into a learning switch
+ swCtl100 = self.addSwitch( 'swCtl100', dpid = '0000000000000100' )
+
+
+ # BGP speaker hosts
+ speaker1 = self.addHost( 'speaker1' )
+ speaker2 = self.addHost( 'speaker2' )
+
+ root = self.addHost( 'root', inNamespace = False , ip = '0' )
+
+ # hosts behind each AS
+ host64514 = self.addHost( 'host64514' )
+ host64515 = self.addHost( 'host64515' )
+ host64516 = self.addHost( 'host64516' )
+
+ self.addLink( 'speaker1', sw24 )
+ self.addLink( 'speaker2', sw24 )
+
+ # connect all switches
+ self.addLink( sw1, sw2 )
+ self.addLink( sw1, sw6 )
+ self.addLink( sw1, sw8 )
+ self.addLink( sw2, sw3 )
+ self.addLink( sw3, sw4 )
+ self.addLink( sw3, sw5 )
+ self.addLink( sw4, sw8 )
+ self.addLink( sw5, sw7 )
+ self.addLink( sw5, sw9 )
+ self.addLink( sw6, sw13 )
+ self.addLink( sw7, sw8 )
+ self.addLink( sw8, sw11 )
+ self.addLink( sw9, sw10 )
+ self.addLink( sw10, sw12 )
+ self.addLink( sw11, sw12 )
+ self.addLink( sw11, sw14 )
+ self.addLink( sw12, sw17 )
+ self.addLink( sw13, sw14 )
+ self.addLink( sw13, sw21 )
+ self.addLink( sw14, sw15 )
+ self.addLink( sw14, sw18 )
+ self.addLink( sw14, sw23 )
+ self.addLink( sw15, sw16 )
+ self.addLink( sw16, sw17 )
+ self.addLink( sw17, sw19 )
+ self.addLink( sw17, sw20 )
+ self.addLink( sw18, sw23 )
+ self.addLink( sw19, sw27 )
+ self.addLink( sw20, sw28 )
+ self.addLink( sw21, sw22 )
+ self.addLink( sw21, sw29 )
+ self.addLink( sw22, sw23 )
+ self.addLink( sw23, sw24 )
+ self.addLink( sw23, sw31 )
+ self.addLink( sw24, sw25 )
+ self.addLink( sw25, sw26 )
+ self.addLink( sw26, sw27 )
+ self.addLink( sw27, sw28 )
+ self.addLink( sw27, sw34 )
+ self.addLink( sw29, sw30 )
+ self.addLink( sw29, sw35 )
+ self.addLink( sw30, sw31 )
+ self.addLink( sw31, sw32 )
+ self.addLink( sw32, sw33 )
+ self.addLink( sw32, sw39 )
+ self.addLink( sw33, sw34 )
+ self.addLink( sw35, sw36 )
+ self.addLink( sw36, sw37 )
+ self.addLink( sw37, sw38 )
+ self.addLink( sw38, sw39 )
+
+ # connection between switches and peers
+ self.addLink( peer64514, sw32 )
+ self.addLink( peer64515, sw8 )
+ self.addLink( peer64516, sw28 )
+
+ # connection between BGP peer and hosts behind the BGP peer
+ self.addLink( peer64514, host64514 )
+ self.addLink( peer64515, host64515 )
+ self.addLink( peer64516, host64516 )
+
+ # Internal Connection To Hosts
+ self.addLink( swCtl100, peer64514 )
+ self.addLink( swCtl100, peer64515 )
+ self.addLink( swCtl100, peer64516 )
+ self.addLink( swCtl100, speaker1 )
+ self.addLink( swCtl100, speaker2 )
+
+
+ # add host64514 to control plane for ping test
+ self.addLink( swCtl100, host64514 )
+ self.addLink( swCtl100, root )
+ self.addLink( swCtl100, root )
+ self.addLink( swCtl100, root )
+
+
+def startsshd( host ):
+ "Start sshd on host"
+ info( '*** Starting sshd\n' )
+ name, intf, ip = host.name, host.defaultIntf(), host.IP()
+ banner = '/tmp/%s.banner' % name
+ host.cmd( 'echo "Welcome to %s at %s" > %s' % ( name, ip, banner ) )
+ host.cmd( '/usr/sbin/sshd -o "Banner %s"' % banner, '-o "UseDNS no"' )
+ info( '***', host.name, 'is running sshd on', intf, 'at', ip, '\n' )
+
+def startsshds ( hosts ):
+ for h in hosts:
+ startsshd( h )
+
+def stopsshd():
+ "Stop *all* sshd processes with a custom banner"
+ info( '*** Shutting down stale sshd/Banner processes ',
+ quietRun( "pkill -9 -f Banner" ), '\n' )
+
+def startquagga( host, num, config_file ):
+ info( '*** Starting Quagga on %s\n' % host )
+ host.cmd( "cd %s" % QUAGGA_CONFIG_DIR )
+ zebra_cmd = \
+ '%s/zebra -d -f ./zebra.conf -z %s/zserv%s.api -i %s/zebra%s.pid'\
+ % ( QUAGGA_DIR, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num )
+ quagga_cmd = '%s/bgpd -d -f %s -z %s/zserv%s.api -i %s/bgpd%s.pid' \
+ % ( QUAGGA_DIR, config_file, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num )
+
+ print zebra_cmd
+ print quagga_cmd
+
+ host.cmd( zebra_cmd )
+ host.cmd( quagga_cmd )
+
+'''
+def startQuaggaFromTeston( host, num, config_file ):
+ global net
+ h = net.get( str( host ) )
+ startquagga( h, num, config_file )
+'''
+
+def startquaggahost5( host, num ):
+ info( '*** Starting Quagga on %s\n' % host )
+ zebra_cmd = \
+ '%s/zebra -d -f ./zebra.conf -z %s/zserv%s.api -i %s/zebra%s.pid' \
+ % ( QUAGGA_DIR, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num )
+ quagga_cmd = \
+ '%s/bgpd -d -f ./as4quaggas/quagga%s.conf -z %s/zserv%s.api -i %s/bgpd%s.pid'\
+ % ( QUAGGA_DIR, num, QUAGGA_RUN_DIR, num, QUAGGA_RUN_DIR, num )
+
+ host.cmd( zebra_cmd )
+ host.cmd( quagga_cmd )
+
+
+def stopquagga():
+ quietRun( 'sudo pkill -9 -f bgpd' )
+ quietRun( 'sudo pkill -9 -f zebra' )
+
+def sdn1net():
+ topo = SDNTopo()
+ info( '*** Creating network\n' )
+
+ # global net
+ net = Mininet( topo = topo, controller = RemoteController )
+
+
+ speaker1, speaker2, peer64514, peer64515, peer64516 = \
+ net.get( 'speaker1', 'speaker2' ,
+ 'peer64514', 'peer64515', 'peer64516' )
+
+ # Adding addresses to speakers' interface connected to sw24
+ # for BGP peering
+ speaker1.setMAC( '00:00:00:00:00:01', 'speaker1-eth0' )
+ speaker1.cmd( 'ip addr add 10.0.4.101/24 dev speaker1-eth0' )
+ speaker1.cmd( 'ip addr add 10.0.5.101/24 dev speaker1-eth0' )
+ speaker1.cmd( 'ip addr add 10.0.6.101/24 dev speaker1-eth0' )
+
+ speaker1.defaultIntf().setIP( '10.0.4.101/24' )
+ speaker1.defaultIntf().setMAC( '00:00:00:00:00:01' )
+
+ speaker2.setMAC( '00:00:00:00:00:02', 'speaker2-eth0' )
+ speaker2.cmd( 'ip addr add 10.0.14.101/24 dev speaker2-eth0' )
+ speaker2.cmd( 'ip addr add 10.0.15.101/24 dev speaker2-eth0' )
+ speaker2.cmd( 'ip addr add 10.0.16.101/24 dev speaker2-eth0' )
+
+ speaker2.defaultIntf().setIP( '10.0.14.101/24' )
+ speaker2.defaultIntf().setMAC( '00:00:00:00:00:02' )
+
+ # Net has to be start after adding the above link
+ net.start()
+
+ # setup configuration on the interface connected to switch
+ peer64514.cmd( "ifconfig peer64514-eth0 10.0.4.1 up" )
+ peer64514.cmd( "ip addr add 10.0.14.1/24 dev peer64514-eth0" )
+ peer64514.setMAC( '00:00:00:00:00:04', 'peer64514-eth0' )
+ peer64515.cmd( "ifconfig peer64515-eth0 10.0.5.1 up" )
+ peer64515.cmd( "ip addr add 10.0.15.1/24 dev peer64515-eth0" )
+ peer64515.setMAC( '00:00:00:00:00:05', 'peer64515-eth0' )
+ peer64516.cmd( "ifconfig peer64516-eth0 10.0.6.1 up" )
+ peer64516.cmd( "ip addr add 10.0.16.1/24 dev peer64516-eth0" )
+ peer64516.setMAC( '00:00:00:00:00:06', 'peer64516-eth0' )
+
+ # setup configuration on the interface connected to hosts
+ peer64514.setIP( "4.0.0.254", 8, "peer64514-eth1" )
+ peer64514.setMAC( '00:00:00:00:00:44', 'peer64514-eth1' )
+ peer64515.setIP( "5.0.0.254", 8, "peer64515-eth1" )
+ peer64515.setMAC( '00:00:00:00:00:55', 'peer64515-eth1' )
+ peer64516.setIP( "6.0.0.254", 8, "peer64516-eth1" )
+ peer64516.setMAC( '00:00:00:00:00:66', 'peer64516-eth1' )
+
+ # enable forwarding on BGP peer hosts
+ peer64514.cmd( 'sysctl net.ipv4.conf.all.forwarding=1' )
+ peer64515.cmd( 'sysctl net.ipv4.conf.all.forwarding=1' )
+ peer64516.cmd( 'sysctl net.ipv4.conf.all.forwarding=1' )
+
+ # config interface for control plane connectivity
+ peer64514.setIP( "192.168.0.4", 24, "peer64514-eth2" )
+ peer64515.setIP( "192.168.0.5", 24, "peer64515-eth2" )
+ peer64516.setIP( "192.168.0.6", 24, "peer64516-eth2" )
+
+ # Setup hosts in each non-SDN AS
+ host64514, host64515, host64516 = \
+ net.get( 'host64514', 'host64515', 'host64516' )
+ host64514.cmd( 'ifconfig host64514-eth0 4.0.0.1 up' )
+ host64514.cmd( 'ip route add default via 4.0.0.254' )
+ host64514.setIP( '192.168.0.44', 24, 'host64514-eth1' ) # for control plane
+ host64515.cmd( 'ifconfig host64515-eth0 5.0.0.1 up' )
+ host64515.cmd( 'ip route add default via 5.0.0.254' )
+ host64516.cmd( 'ifconfig host64516-eth0 6.0.0.1 up' )
+ host64516.cmd( 'ip route add default via 6.0.0.254' )
+
+
+ # set up swCtl100 as a learning
+ swCtl100 = net.get( 'swCtl100' )
+ swCtl100.cmd( 'ovs-vsctl set-controller swCtl100 none' )
+ swCtl100.cmd( 'ovs-vsctl set-fail-mode swCtl100 standalone' )
+
+ # connect all switches to controller
+ '''
+ onos1IP = "10.128.4.52"
+ onos2IP = "10.128.4.53"
+ onos3IP = "10.128.4.54"
+ for i in range ( 1, numSw + 1 ):
+ swX = net.get( 'sw%s' % ( i ) )
+ swX.cmd( 'ovs-vsctl set-controller sw%s tcp:%s:6653 tcp:%s:6653 tcp:%s:6653' % ( i, onos1IP, onos2IP, onos3IP) )
+ '''
+
+ # Start Quagga on border routers
+ startquagga( peer64514, 64514, 'quagga64514.conf' )
+ startquagga( peer64515, 64515, 'quagga64515.conf' )
+ startquagga( peer64516, 64516, 'quagga64516.conf' )
+
+ # start Quagga in SDN network
+ startquagga( speaker1, 64513, 'quagga-sdn.conf' )
+ startquagga( speaker2, 64512, 'quagga-sdn-speaker2.conf' )
+
+
+ root = net.get( 'root' )
+ root.intf( 'root-eth0' ).setIP( '1.1.1.2/24' )
+ root.cmd( 'ip addr add 192.168.0.100/24 dev root-eth0' )
+
+ root.intf( 'root-eth1' ).setIP( '1.1.1.4/24' )
+ root.cmd( 'ip addr add 192.168.0.101/24 dev root-eth1' )
+
+ root.intf( 'root-eth2' ).setIP( '1.1.1.6/24' )
+ root.cmd( 'ip addr add 192.168.0.102/24 dev root-eth2' )
+
+ speaker1.intf( 'speaker1-eth1' ).setIP( '1.1.1.1/24' )
+ speaker2.intf( 'speaker2-eth1' ).setIP( '1.1.1.3/24' )
+
+
+ stopsshd()
+
+ hosts = [ peer64514, peer64515, peer64516, host64514];
+ startsshds( hosts )
+
+
+ '''
+ forwarding1 = '%s:2000:%s:2000' % ( '1.1.1.2', onos1IP )
+ root.cmd( 'ssh -nNT -o "PasswordAuthentication no" \
+ -o "StrictHostKeyChecking no" -l sdn -L %s %s & ' % ( forwarding1, onos1IP ) )
+
+ forwarding2 = '%s:2000:%s:2000' % ( '1.1.1.4', onos2IP )
+ root.cmd( 'ssh -nNT -o "PasswordAuthentication no" \
+ -o "StrictHostKeyChecking no" -l sdn -L %s %s & ' % ( forwarding2, onos2IP ) )
+
+ forwarding3 = '%s:2000:%s:2000' % ( '1.1.1.6', onos3IP )
+ root.cmd( 'ssh -nNT -o "PasswordAuthentication no" \
+ -o "StrictHostKeyChecking no" -l sdn -L %s %s & ' % ( forwarding3, onos3IP ) )
+ '''
+ CLI( net )
+
+ stopsshd()
+ stopquagga()
+ net.stop()
+
+
+if __name__ == '__main__':
+ setLogLevel( 'debug' )
+ sdn1net()
diff --git a/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga-sdn-speaker2.conf b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga-sdn-speaker2.conf
new file mode 100644
index 0000000..256e7e8
--- /dev/null
+++ b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga-sdn-speaker2.conf
@@ -0,0 +1,49 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+!
+router bgp 64513
+ bgp router-id 10.0.14.101
+ timers bgp 1 3
+ !timers bgp 3 9
+ neighbor 10.0.14.1 remote-as 64514
+ neighbor 10.0.14.1 ebgp-multihop
+ neighbor 10.0.14.1 timers connect 5
+ neighbor 10.0.15.1 remote-as 64515
+ neighbor 10.0.15.1 ebgp-multihop
+ neighbor 10.0.15.1 timers connect 5
+ neighbor 10.0.16.1 remote-as 64516
+ neighbor 10.0.16.1 ebgp-multihop
+ neighbor 10.0.16.1 timers connect 5
+
+ neighbor 1.1.1.2 remote-as 64513
+ neighbor 1.1.1.2 port 2000
+ neighbor 1.1.1.2 timers connect 5
+
+ neighbor 1.1.1.4 remote-as 64513
+ neighbor 1.1.1.4 port 2000
+ neighbor 1.1.1.4 timers connect 5
+
+ neighbor 1.1.1.6 remote-as 64513
+ neighbor 1.1.1.6 port 2000
+ neighbor 1.1.1.6 timers connect 5
+
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
diff --git a/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga-sdn.conf b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga-sdn.conf
new file mode 100644
index 0000000..3d2a455
--- /dev/null
+++ b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga-sdn.conf
@@ -0,0 +1,49 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+!
+router bgp 64513
+ bgp router-id 10.0.4.101
+ timers bgp 1 3
+ !timers bgp 3 9
+ neighbor 10.0.4.1 remote-as 64514
+ neighbor 10.0.4.1 ebgp-multihop
+ neighbor 10.0.4.1 timers connect 5
+ neighbor 10.0.5.1 remote-as 64515
+ neighbor 10.0.5.1 ebgp-multihop
+ neighbor 10.0.5.1 timers connect 5
+ neighbor 10.0.6.1 remote-as 64516
+ neighbor 10.0.6.1 ebgp-multihop
+ neighbor 10.0.6.1 timers connect 5
+
+ neighbor 1.1.1.2 remote-as 64513
+ neighbor 1.1.1.2 port 2000
+ neighbor 1.1.1.2 timers connect 5
+
+ neighbor 1.1.1.4 remote-as 64513
+ neighbor 1.1.1.4 port 2000
+ neighbor 1.1.1.4 timers connect 5
+
+ neighbor 1.1.1.6 remote-as 64513
+ neighbor 1.1.1.6 port 2000
+ neighbor 1.1.1.6 timers connect 5
+
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
diff --git a/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga64514.conf b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga64514.conf
new file mode 100644
index 0000000..cc056dd
--- /dev/null
+++ b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga64514.conf
@@ -0,0 +1,29 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+router bgp 64514
+ bgp router-id 10.0.4.1
+! timers bgp 1 3
+ neighbor 10.0.4.101 remote-as 64513
+ neighbor 10.0.14.101 remote-as 64513
+ network 4.0.0.0/24
+
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
\ No newline at end of file
diff --git a/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga64515.conf b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga64515.conf
new file mode 100644
index 0000000..7b45d57
--- /dev/null
+++ b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga64515.conf
@@ -0,0 +1,29 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+router bgp 64515
+ bgp router-id 10.0.5.1
+! timers bgp 1 3
+ neighbor 10.0.5.101 remote-as 64513
+ neighbor 10.0.15.101 remote-as 64513
+ network 5.0.0.0/24
+
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
diff --git a/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga64516.conf b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga64516.conf
new file mode 100644
index 0000000..20c104e
--- /dev/null
+++ b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/quagga64516.conf
@@ -0,0 +1,32 @@
+! -*- bgp -*-
+!
+! BGPd sample configuratin file
+!
+! $Id: bgpd.conf.sample,v 1.1 2002/12/13 20:15:29 paul Exp $
+!
+hostname bgpd
+password hello
+!enable password please-set-at-here
+!
+!bgp mulitple-instance
+!
+router bgp 64516
+ bgp router-id 10.0.6.1
+! timers bgp 1 3
+ neighbor 10.0.6.101 remote-as 64513
+ neighbor 10.0.16.101 remote-as 64513
+ network 6.0.0.0/24
+
+! neighbor 10.0.0.2 route-map set-nexthop out
+! neighbor 10.0.0.2 ebgp-multihop
+! neighbor 10.0.0.2 next-hop-self
+!
+! access-list all permit any
+!
+!route-map set-nexthop permit 10
+! match ip address all
+! set ip next-hop 10.0.0.1
+!
+!log file /usr/local/var/log/quagga/bgpd.log
+!
+log stdout
diff --git a/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/zebra.conf b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/zebra.conf
new file mode 100644
index 0000000..517db94
--- /dev/null
+++ b/TestON/tests/USECASE_SdnipFunctionCluster_fsfw/Dependency/zebra.conf
@@ -0,0 +1,26 @@
+! -*- zebra -*-
+!
+! zebra sample configuration file
+!
+! $Id: zebra.conf.sample,v 1.1 2002/12/13 20:15:30 paul Exp $
+!
+hostname zebra
+password hello
+enable password 0fw0rk
+log stdout
+!
+! Interfaces description.
+!
+!interface lo
+! description test of desc.
+!
+!interface sit0
+! multicast
+
+!
+! Static default route sample.
+!
+!ip route 0.0.0.0/0 203.181.89.241
+!
+
+!log file /usr/local/var/log/quagga/zebra.log