diff --git a/TestON/tests/HATestClusterRestart/HATestClusterRestart.py b/TestON/tests/HATestClusterRestart/HATestClusterRestart.py
index 2933c93..ff38cfe 100644
--- a/TestON/tests/HATestClusterRestart/HATestClusterRestart.py
+++ b/TestON/tests/HATestClusterRestart/HATestClusterRestart.py
@@ -119,7 +119,7 @@
         else:
             main.log.warn( "Did not pull new code so skipping mvn " +
                            "clean install" )
-    main.ONOSbench.getVersion( report=True )
+        main.ONOSbench.getVersion( report=True )
 
         main.step( "Creating ONOS package" )
         packageResult = main.ONOSbench.onosPackage()
@@ -439,19 +439,36 @@
                 str( hex( i )[ 2: ] ).zfill( 2 ).upper()
             host2 = "00:00:00:00:00:" + \
                 str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper()
-            host1Id = main.ONOScli1.getHost( host1 )[ 'id' ]
-            host2Id = main.ONOScli1.getHost( host2 )[ 'id' ]
-            # NOTE: get host can return None
+            # NOTE: getHost can return None
+            host1Dict = main.ONOScli1.getHost( host1 )
+            host2Dict = main.ONOScli1.getHost( host2 )
+            host1Id = None
+            host2Id = None
+            if host1Dict and host2Dict:
+                host1Id = host1Dict.get( 'id', None )
+                host2Id = host2Dict.get( 'id', None )
             if host1Id and host2Id:
                 tmpResult = main.ONOScli1.addHostIntent(
                     host1Id,
                     host2Id )
             else:
                 main.log.error( "Error, getHost() failed" )
+                main.log.warn( json.dumps( json.loads( main.ONOScli1.hosts() ),
+                                           sort_keys=True,
+                                           indent=4,
+                                           separators=( ',', ': ' ) ) )
                 tmpResult = main.FALSE
             intentAddResult = bool( pingResult and intentAddResult
                                      and tmpResult )
             # TODO Check that intents were added?
+        # Print the intent states
+        intents = main.ONOScli1.intents( )
+        intentStates = []
+        for intent in json.loads( intents ):  # Iter through intents of a node
+            intentStates.append( intent.get( 'state', None ) )
+        out = [ (i, intentStates.count( i ) ) for i in set( intentStates ) ]
+        main.log.info( dict( out ) )
+
         utilities.assert_equals(
             expect=True,
             actual=intentAddResult,
@@ -1293,6 +1310,24 @@
             actual=intentCheck,
             onpass="Intents are consistent across all ONOS nodes",
             onfail="ONOS nodes have different views of intents" )
+        # Print the intent states
+        intents = []
+        intents.append( ONOS1Intents )
+        intents.append( ONOS2Intents )
+        intents.append( ONOS3Intents )
+        intents.append( ONOS4Intents )
+        intents.append( ONOS5Intents )
+        intents.append( ONOS6Intents )
+        intents.append( ONOS7Intents )
+        intentStates = []
+        for node in intents:  # Iter through ONOS nodes
+            nodeStates = []
+            for intent in json.loads( node ):  # Iter through intents of a node
+                nodeStates.append( intent[ 'state' ] )
+            intentStates.append( nodeStates )
+            out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ]
+            main.log.info( dict( out ) )
+
 
         # NOTE: Hazelcast has no durability, so intents are lost across system
         # restarts
@@ -1300,7 +1335,8 @@
         main.step( "Compare current intents with intents before the failure" )
         # NOTE: this requires case 5 to pass for intentState to be set.
         #      maybe we should stop the test if that fails?
-        if intentState == ONOS1Intents:
+        sameIntents = main.TRUE
+        if intentState and intentState == ONOS1Intents:
             sameIntents = main.TRUE
             main.log.report( "Intents are consistent with before failure" )
         # TODO: possibly the states have changed? we may need to figure out
@@ -1489,7 +1525,6 @@
             for controller in range( 0, len( hosts ) ):
                 controllerStr = str( controller + 1 )
                 for host in hosts[ controller ]:
-                    host
                     if host[ 'ips' ] == []:
                         main.log.error(
                             "DEBUG:Error with host ips on controller" +
@@ -1642,7 +1677,7 @@
         note = "note it takes about " + str( int( cliTime ) ) + \
             " seconds for the test to make all the cli calls to fetch " +\
             "the topology from each ONOS instance"
-        main.log.report(
+        main.log.info(
             "Very crass estimate for topology discovery/convergence( " +
             str( note ) + " ): " + str( elapsed ) + " seconds, " +
             str( count ) + " tries" )
diff --git a/TestON/tests/HATestMinorityRestart/HATestMinorityRestart.py b/TestON/tests/HATestMinorityRestart/HATestMinorityRestart.py
index d23dcda..3d9adc7 100644
--- a/TestON/tests/HATestMinorityRestart/HATestMinorityRestart.py
+++ b/TestON/tests/HATestMinorityRestart/HATestMinorityRestart.py
@@ -437,19 +437,37 @@
                 str( hex( i )[ 2: ] ).zfill( 2 ).upper()
             host2 = "00:00:00:00:00:" + \
                 str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper()
-            host1Id = main.ONOScli1.getHost( host1 )[ 'id' ]
-            host2Id = main.ONOScli1.getHost( host2 )[ 'id' ]
-            # NOTE: get host can return None
+            # NOTE: getHost can return None
+            host1Dict = main.ONOScli1.getHost( host1 )
+            host2Dict = main.ONOScli1.getHost( host2 )
+            host1Id = None
+            host2Id = None
+            if host1Dict and host2Dict:
+                host1Id = host1Dict.get( 'id', None )
+                host2Id = host2Dict.get( 'id', None )
             if host1Id and host2Id:
-                tmpResult = main.ONOScli1.addHostIntent(
+                #Changed onos node to test something
+                tmpResult = main.ONOScli4.addHostIntent(
                     host1Id,
                     host2Id )
             else:
                 main.log.error( "Error, getHost() failed" )
+                main.log.warn( json.dumps( json.loads( main.ONOScli1.hosts() ),
+                                           sort_keys=True,
+                                           indent=4,
+                                           separators=( ',', ': ' ) ) )
                 tmpResult = main.FALSE
             intentAddResult = bool( pingResult and intentAddResult
                                      and tmpResult )
             # TODO Check that intents were added?
+        # Print the intent states
+        intents = main.ONOScli1.intents( )
+        intentStates = []
+        for intent in json.loads( intents ):  # Iter through intents of a node
+            intentStates.append( intent.get( 'state', None ) )
+        out = [ (i, intentStates.count( i ) ) for i in set( intentStates ) ]
+        main.log.info( dict( out ) )
+
         utilities.assert_equals(
             expect=True,
             actual=intentAddResult,
@@ -909,12 +927,6 @@
         hosts.append( main.ONOScli5.hosts() )
         hosts.append( main.ONOScli6.hosts() )
         hosts.append( main.ONOScli7.hosts() )
-        for controller in range( 0, len( hosts ) ):
-            controllerStr = str( controller + 1 )
-            for host in hosts[ controller ]:
-                if host[ 'ips' ] == []:
-                    main.log.error( "DEBUG:Error with host ips on controller" +
-                                    controllerStr + ": " + str( host ) )
         ports = []
         ports.append( main.ONOScli1.ports() )
         ports.append( main.ONOScli2.ports() )
@@ -1290,13 +1302,32 @@
             actual=intentCheck,
             onpass="Intents are consistent across all ONOS nodes",
             onfail="ONOS nodes have different views of intents" )
+        # Print the intent states
+        intents = []
+        intents.append( ONOS1Intents )
+        intents.append( ONOS2Intents )
+        intents.append( ONOS3Intents )
+        intents.append( ONOS4Intents )
+        intents.append( ONOS5Intents )
+        intents.append( ONOS6Intents )
+        intents.append( ONOS7Intents )
+        intentStates = []
+        for node in intents:  # Iter through ONOS nodes
+            nodeStates = []
+            for intent in json.loads( node ):  # Iter through intents of a node
+                nodeStates.append( intent[ 'state' ] )
+            intentStates.append( nodeStates )
+            out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ]
+            main.log.info( dict( out ) )
+
 
         # NOTE: Hazelcast has no durability, so intents are lost across system
         # restarts
         main.step( "Compare current intents with intents before the failure" )
         # NOTE: this requires case 5 to pass for intentState to be set.
         #      maybe we should stop the test if that fails?
-        if intentState == ONOS1Intents:
+        sameIntents = main.TRUE
+        if intentState and intentState == ONOS1Intents:
             sameIntents = main.TRUE
             main.log.report( "Intents are consistent with before failure" )
         # TODO: possibly the states have changed? we may need to figure out
@@ -1490,7 +1521,6 @@
             for controller in range( 0, len( hosts ) ):
                 controllerStr = str( controller + 1 )
                 for host in hosts[ controller ]:
-                    host
                     if host[ 'ips' ] == []:
                         main.log.error(
                             "DEBUG:Error with host ips on controller" +
@@ -1643,7 +1673,7 @@
         note = "note it takes about " + str( int( cliTime ) ) + \
             " seconds for the test to make all the cli calls to fetch " +\
             "the topology from each ONOS instance"
-        main.log.report(
+        main.log.info(
             "Very crass estimate for topology discovery/convergence( " +
             str( note ) + " ): " + str( elapsed ) + " seconds, " +
             str( count ) + " tries" )
diff --git a/TestON/tests/HATestSanity/HATestSanity.py b/TestON/tests/HATestSanity/HATestSanity.py
index e205a02..58f9954 100644
--- a/TestON/tests/HATestSanity/HATestSanity.py
+++ b/TestON/tests/HATestSanity/HATestSanity.py
@@ -437,19 +437,36 @@
                 str( hex( i )[ 2: ] ).zfill( 2 ).upper()
             host2 = "00:00:00:00:00:" + \
                 str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper()
-            host1Id = main.ONOScli1.getHost( host1 )[ 'id' ]
-            host2Id = main.ONOScli1.getHost( host2 )[ 'id' ]
-            # NOTE: get host can return None
+            # NOTE: getHost can return None
+            host1Dict = main.ONOScli1.getHost( host1 )
+            host2Dict = main.ONOScli1.getHost( host2 )
+            host1Id = None
+            host2Id = None
+            if host1Dict and host2Dict:
+                host1Id = host1Dict.get( 'id', None )
+                host2Id = host2Dict.get( 'id', None )
             if host1Id and host2Id:
                 tmpResult = main.ONOScli1.addHostIntent(
                     host1Id,
                     host2Id )
             else:
                 main.log.error( "Error, getHost() failed" )
+                main.log.warn( json.dumps( json.loads( main.ONOScli1.hosts() ),
+                                           sort_keys=True,
+                                           indent=4,
+                                           separators=( ',', ': ' ) ) )
                 tmpResult = main.FALSE
             intentAddResult = bool( pingResult and intentAddResult
                                      and tmpResult )
             # TODO Check that intents were added?
+        # Print the intent states
+        intents = main.ONOScli1.intents( )
+        intentStates = []
+        for intent in json.loads( intents ):  # Iter through intents of a node
+            intentStates.append( intent.get( 'state', None ) )
+        out = [ (i, intentStates.count( i ) ) for i in set( intentStates ) ]
+        main.log.info( dict( out ) )
+
         utilities.assert_equals(
             expect=True,
             actual=intentAddResult,
@@ -1261,13 +1278,32 @@
             actual=intentCheck,
             onpass="Intents are consistent across all ONOS nodes",
             onfail="ONOS nodes have different views of intents" )
+        # Print the intent states
+        intents = []
+        intents.append( ONOS1Intents )
+        intents.append( ONOS2Intents )
+        intents.append( ONOS3Intents )
+        intents.append( ONOS4Intents )
+        intents.append( ONOS5Intents )
+        intents.append( ONOS6Intents )
+        intents.append( ONOS7Intents )
+        intentStates = []
+        for node in intents:  # Iter through ONOS nodes
+            nodeStates = []
+            for intent in json.loads( node ):  # Iter through intents of a node
+                nodeStates.append( intent[ 'state' ] )
+            intentStates.append( nodeStates )
+            out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ]
+            main.log.info( dict( out ) )
+
 
         # NOTE: Hazelcast has no durability, so intents are lost across system
         # restarts
         main.step( "Compare current intents with intents before the failure" )
         # NOTE: this requires case 5 to pass for intentState to be set.
         #      maybe we should stop the test if that fails?
-        if intentState == ONOS1Intents:
+        sameIntents = main.TRUE
+        if intentState and intentState == ONOS1Intents:
             sameIntents = main.TRUE
             main.log.report( "Intents are consistent with before failure" )
         # TODO: possibly the states have changed? we may need to figure out
@@ -1457,7 +1493,6 @@
             for controller in range( 0, len( hosts ) ):
                 controllerStr = str( controller + 1 )
                 for host in hosts[ controller ]:
-                    host
                     if host[ 'ips' ] == []:
                         main.log.error(
                             "DEBUG:Error with host ips on controller" +
@@ -1611,7 +1646,7 @@
                 note = "note it takes about " + str( int( cliTime ) ) + \
                     " seconds for the test to make all the cli calls to fetch " +\
                     "the topology from each ONOS instance"
-                main.log.report(
+                main.log.info(
                     "Very crass estimate for topology discovery/convergence( " +
                     str( note ) + " ): " + str( elapsed ) + " seconds, " +
                     str( count ) + " tries" )
diff --git a/TestON/tests/HATestSingleInstanceRestart/HATestSingleInstanceRestart.py b/TestON/tests/HATestSingleInstanceRestart/HATestSingleInstanceRestart.py
index f312e23..4b9b287 100644
--- a/TestON/tests/HATestSingleInstanceRestart/HATestSingleInstanceRestart.py
+++ b/TestON/tests/HATestSingleInstanceRestart/HATestSingleInstanceRestart.py
@@ -239,19 +239,36 @@
                 str( hex( i )[ 2: ] ).zfill( 2 ).upper()
             host2 = "00:00:00:00:00:" + \
                 str( hex( i + 10 )[ 2: ] ).zfill( 2 ).upper()
-            host1Id = main.ONOScli1.getHost( host1 )[ 'id' ]
-            host2Id = main.ONOScli1.getHost( host2 )[ 'id' ]
-            # NOTE: get host can return None
+            # NOTE: getHost can return None
+            host1Dict = main.ONOScli1.getHost( host1 )
+            host2Dict = main.ONOScli1.getHost( host2 )
+            host1Id = None
+            host2Id = None
+            if host1Dict and host2Dict:
+                host1Id = host1Dict.get( 'id', None )
+                host2Id = host2Dict.get( 'id', None )
             if host1Id and host2Id:
                 tmpResult = main.ONOScli1.addHostIntent(
                     host1Id,
                     host2Id )
             else:
                 main.log.error( "Error, getHost() failed" )
+                main.log.warn( json.dumps( json.loads( main.ONOScli1.hosts() ),
+                                           sort_keys=True,
+                                           indent=4,
+                                           separators=( ',', ': ' ) ) )
                 tmpResult = main.FALSE
             intentAddResult = bool( pingResult and intentAddResult
                                      and tmpResult )
             # TODO Check that intents were added?
+        # Print the intent states
+        intents = main.ONOScli1.intents( )
+        intentStates = []
+        for intent in json.loads( intents ):  # Iter through intents of a node
+            intentStates.append( intent.get( 'state', None ) )
+        out = [ (i, intentStates.count( i ) ) for i in set( intentStates ) ]
+        main.log.info( dict( out ) )
+
         utilities.assert_equals(
             expect=True,
             actual=intentAddResult,
@@ -565,6 +582,18 @@
             actual=intentCheck,
             onpass="Intents are consistent across all ONOS nodes",
             onfail="ONOS nodes have different views of intents" )
+        # Print the intent states
+        intents = []
+        intents.append( ONOS1Intents )
+        intentStates = []
+        for node in intents:  # Iter through ONOS nodes
+            nodeStates = []
+            for intent in json.loads( node ):  # Iter through intents of a node
+                nodeStates.append( intent[ 'state' ] )
+            intentStates.append( nodeStates )
+            out = [ (i, nodeStates.count( i ) ) for i in set( nodeStates ) ]
+            main.log.info( dict( out ) )
+
 
         # NOTE: Hazelcast has no durability, so intents are lost across system
         # restarts
@@ -572,7 +601,8 @@
         main.step( "Compare current intents with intents before the failure" )
         # NOTE: this requires case 5 to pass for intentState to be set.
         #      maybe we should stop the test if that fails?
-        if intentState == ONOS1Intents:
+        sameIntents = main.TRUE
+        if intentState and intentState == ONOS1Intents:
             sameIntents = main.TRUE
             main.log.report( "Intents are consistent with before failure" )
         # TODO: possibly the states have changed? we may need to figure out
@@ -773,7 +803,7 @@
         note = "note it takes about " + str( int( cliTime ) ) + \
             " seconds for the test to make all the cli calls to fetch " +\
             "the topology from each ONOS instance"
-        main.log.report(
+        main.log.info(
             "Very crass estimate for topology discovery/convergence( " +
             str( note ) + " ): " + str( elapsed ) + " seconds, " +
             str( count ) + " tries" )