Update Cluster Driver
Change-Id: I8a3a57e19637ff210548e57d41178e6f194cf694
diff --git a/TestON/tests/USECASE/VPLS/VPLSBasic/VPLSBasic.py b/TestON/tests/USECASE/VPLS/VPLSBasic/VPLSBasic.py
index a0a061a..0b8c85d 100644
--- a/TestON/tests/USECASE/VPLS/VPLSBasic/VPLSBasic.py
+++ b/TestON/tests/USECASE/VPLS/VPLSBasic/VPLSBasic.py
@@ -64,15 +64,15 @@
cellName = main.params[ 'ENV' ][ 'cellName' ]
main.apps = main.params[ 'ENV' ][ 'cellApps' ]
- main.numCtrls = int( main.params[ 'num_controllers' ] )
ofPort = main.params[ 'CTRL' ][ 'port' ]
- stepResult = main.testSetUp.envSetup( hasRest=True, hasNode=True )
+ stepResult = main.testSetUp.envSetup()
except Exception as e:
main.testSetUp.envSetupException( e )
main.testSetUp.evnSetupConclusion( stepResult )
- main.testSetUp.ONOSSetUp( main.Mininet1, cellName=cellName )
+ main.testSetUp.ONOSSetUp( main.Mininet1, main.Cluster,
+ cellName=cellName )
main.step( "Starting Mininet" )
# scp topo file to mininet
@@ -86,15 +86,14 @@
direction="to" )
topo = " --custom " + main.Mininet1.home + topoFile + " --topo " + topoName
args = " --switch ovs,protocols=OpenFlow13"
- for node in main.nodes:
- args += " --controller=remote,ip=" + node.ip_address
+ for ctrl in main.Cluster.active():
+ args += " --controller=remote,ip=" + ctrl.ipAddress
mnCmd = "sudo mn" + topo + args
mnResult = main.Mininet1.startNet( mnCmd=mnCmd )
utilities.assert_equals( expect=main.TRUE, actual=mnResult,
onpass="Mininet Started",
onfail="Error starting Mininet" )
- main.activeNodes = [ i for i in range( 0, len( main.CLIs ) ) ]
main.step( "Activate apps defined in the params file" )
# get data from the params
@@ -104,11 +103,11 @@
main.log.warn( apps )
activateResult = True
for app in apps:
- main.CLIs[ 0 ].app( app, "Activate" )
+ main.Cluster.active( 0 ).CLI.app( app, "Activate" )
# TODO: check this worked
time.sleep( SLEEP ) # wait for apps to activate
for app in apps:
- state = main.CLIs[ 0 ].appStatus( app )
+ state = main.Cluster.active( 0 ).CLI.appStatus( app )
if state == "ACTIVE":
activateResult = activateResult and True
else:
@@ -129,7 +128,7 @@
for component in config:
for setting in config[ component ]:
value = config[ component ][ setting ]
- check = main.CLIs[ 0 ].setCfg( component, setting, value )
+ check = main.Cluster.active( 0 ).CLI.setCfg( component, setting, value )
main.log.info( "Value was changed? {}".format( main.TRUE == check ) )
checkResult = check and checkResult
utilities.assert_equals( expect=main.TRUE,
@@ -140,22 +139,11 @@
main.log.warn( "No configurations were specified to be changed after startup" )
main.step( "App Ids check" )
- appCheck = main.TRUE
- threads = []
- for i in main.activeNodes:
- t = main.Thread( target=main.CLIs[ i ].appToIDCheck,
- name="appToIDCheck-" + str( i ),
- args=[] )
- threads.append( t )
- t.start()
-
- for t in threads:
- t.join()
- appCheck = appCheck and t.result
- if appCheck != main.TRUE:
- main.log.warn( main.CLIs[ 0 ].apps() )
- main.log.warn( main.CLIs[ 0 ].appIDs() )
- utilities.assert_equals( expect=main.TRUE, actual=appCheck,
+ appCheck = main.Cluster.command( "appToIDCheck", returnBool=True )
+ if appCheck != True:
+ main.log.warn( main.Cluster.active( 0 ).CLI.apps() )
+ main.log.warn( main.Cluster.active( 0 ).CLI.appIDs() )
+ utilities.assert_equals( expect=True, actual=appCheck,
onpass="App Ids seem to be correct",
onfail="Something is wrong with app Ids" )
@@ -167,7 +155,7 @@
from tests.USECASE.VPLS.dependencies import vpls
main.vpls = vpls
- pprint = main.ONOSrest1.pprint
+ pprint = main.Cluster.active( 0 ).REST.pprint
hosts = int( main.params[ 'vpls' ][ 'hosts' ] )
SLEEP = int( main.params[ 'SLEEP' ][ 'netcfg' ] )
@@ -184,7 +172,7 @@
fileName = main.params[ 'DEPENDENCY' ][ 'topology' ]
app = main.params[ 'vpls' ][ 'name' ]
- loadVPLSResult = main.ONOSbench.onosNetCfg( main.nodes[ 0 ].ip_address, "", fileName )
+ loadVPLSResult = main.ONOSbench.onosNetCfg( main.Cluster.active( 0 ).ipAddress, "", fileName )
utilities.assert_equals( expect=main.TRUE,
actual=loadVPLSResult,
onpass="Loaded vpls configuration.",
@@ -211,7 +199,7 @@
main.step( "Check interface configurations" )
result = False
- getPorts = utilities.retry( f=main.ONOSrest1.getNetCfg,
+ getPorts = utilities.retry( f=main.Cluster.active( 0 ).REST.getNetCfg,
retValue=False,
kwargs={"subjectClass":"ports"},
sleep=SLEEP )
@@ -234,7 +222,7 @@
vpls.verify( main )
main.step( "Loading vpls configuration in case any configuration was missed." )
- loadVPLSResult = main.ONOSbench.onosNetCfg( main.nodes[ 0 ].ip_address, "", fileName )
+ loadVPLSResult = main.ONOSbench.onosNetCfg( main.Cluster.active( 0 ).ipAddress, "", fileName )
utilities.assert_equals( expect=main.TRUE,
actual=loadVPLSResult,
onpass="Loaded vpls configuration.",
@@ -255,10 +243,10 @@
"""
from tests.USECASE.VPLS.dependencies import vpls
SLEEP = int( main.params[ 'SLEEP' ][ 'netcfg' ] )
- pprint = main.ONOSrest1.pprint
+ pprint = main.Cluster.active( 0 ).REST.pprint
main.step( "Remove an interface from a vpls network" )
- main.CLIs[ 0 ].vplsRemIface( 'VPLS1', 'h1' )
+ main.Cluster.active( 0 ).CLI.vplsRemIface( 'VPLS1', 'h1' )
time.sleep( SLEEP )
#update master config json
for network in main.vplsConfig:
@@ -268,23 +256,23 @@
vpls.verify( main )
main.step( "Clean all vpls configurations" )
- main.CLIs[ 0 ].vplsClean()
+ main.Cluster.active( 0 ).CLI.vplsClean()
time.sleep( SLEEP )
main.vplsConfig = []
vpls.verify( main )
main.step( "Create a new vpls network" )
name = "Network1"
- main.CLIs[ 0 ].vplsCreate( name )
+ main.Cluster.active( 0 ).CLI.vplsCreate( name )
time.sleep( SLEEP )
network1 = { 'name': name, 'interfaces': [], 'encapsulation': 'NONE' }
main.vplsConfig.append( network1 )
vpls.verify( main )
main.step( "Add interfaces to the network" )
- main.CLIs[ 0 ].vplsAddIface( name, "h1" )
- main.CLIs[ 0 ].vplsAddIface( name, "h5" )
- main.CLIs[ 0 ].vplsAddIface( name, "h4" )
+ main.Cluster.active( 0 ).CLI.vplsAddIface( name, "h1" )
+ main.Cluster.active( 0 ).CLI.vplsAddIface( name, "h5" )
+ main.Cluster.active( 0 ).CLI.vplsAddIface( name, "h4" )
time.sleep( SLEEP )
for network in main.vplsConfig:
if network.get( 'name' ) == name:
@@ -297,7 +285,7 @@
main.step( "Add MPLS encapsulation to a vpls network" )
encapType = "MPLS"
- main.CLIs[ 0 ].vplsSetEncap( name, encapType )
+ main.Cluster.active( 0 ).CLI.vplsSetEncap( name, encapType )
for network in main.vplsConfig:
if network.get( 'name' ) == name:
network[ 'encapsulation' ] = encapType
@@ -306,7 +294,7 @@
main.step( "Change an encapsulation type" )
encapType = "VLAN"
- main.CLIs[ 0 ].vplsSetEncap( name, encapType )
+ main.Cluster.active( 0 ).CLI.vplsSetEncap( name, encapType )
for network in main.vplsConfig:
if network.get( 'name' ) == name:
network[ 'encapsulation' ] = encapType
@@ -315,7 +303,7 @@
main.step( "Remove encapsulation" )
encapType = "NONE"
- main.CLIs[ 0 ].vplsSetEncap( name, encapType )
+ main.Cluster.active( 0 ).CLI.vplsSetEncap( name, encapType )
for network in main.vplsConfig:
if network.get( 'name' ) == name:
network[ 'encapsulation' ] = encapType
@@ -323,7 +311,7 @@
vpls.verify( main )
main.step( "Clean all vpls configurations" )
- main.CLIs[ 0 ].vplsClean()
+ main.Cluster.active( 0 ).CLI.vplsClean()
time.sleep( SLEEP )
main.vplsConfig = []
vpls.verify( main )
diff --git a/TestON/tests/USECASE/VPLS/VPLSBasic/VPLSBasic.topo b/TestON/tests/USECASE/VPLS/VPLSBasic/VPLSBasic.topo
index 03e451b..4441c62 100755
--- a/TestON/tests/USECASE/VPLS/VPLSBasic/VPLSBasic.topo
+++ b/TestON/tests/USECASE/VPLS/VPLSBasic/VPLSBasic.topo
@@ -1,129 +1,32 @@
<TOPOLOGY>
<COMPONENT>
- <ONOSbench>
- <host>localhost</host>
+ <ONOScell>
+ <host>localhost</host> # ONOS "bench" machine
<user>sdn</user>
<password>rocks</password>
- <type>OnosDriver</type>
+ <type>OnosClusterDriver</type>
<connect_order>1</connect_order>
<COMPONENTS>
- <nodes>3</nodes>
- <prompt></prompt>
- </COMPONENTS>
- </ONOSbench>
-
- <ONOScli1>
- <host>localhost</host>
- <user>sdn</user>
- <password>rocks</password>
- <type>OnosCliDriver</type>
- <connect_order>2</connect_order>
- <COMPONENTS>
+ <cluster_name></cluster_name> # Used as a prefix for cluster components. Defaults to 'ONOS'
+ <diff_clihost></diff_clihost> # if it has different host other than localhost for CLI. True or empty.
<karaf_username></karaf_username>
<karaf_password></karaf_password>
- <prompt></prompt>
+ <web_user></web_user>
+ <web_pass></web_pass>
+ <rest_port></rest_port>
+ <prompt></prompt> # TODO: we technically need a few of these, one per component
+ <onos_home></onos_home> # defines where onos home is
+ <nodes> 3 </nodes> # number of nodes in the cluster
</COMPONENTS>
- </ONOScli1>
-
- <ONOScli2>
- <host>localhost</host>
- <user>sdn</user>
- <password>rocks</password>
- <type>OnosCliDriver</type>
- <connect_order>3</connect_order>
- <COMPONENTS>
- <prompt></prompt>
- </COMPONENTS>
- </ONOScli2>
-
- <ONOScli3>
- <host>localhost</host>
- <user>sdn</user>
- <password>rocks</password>
- <type>OnosCliDriver</type>
- <connect_order>4</connect_order>
- <COMPONENTS>
- <prompt></prompt>
- </COMPONENTS>
- </ONOScli3>
-
- <ONOS1>
- <host>OC1</host>
- <user>sdn</user>
- <password>rocks</password>
- <type>OnosDriver</type>
- <connect_order>9</connect_order>
- <COMPONENTS>
- <prompt></prompt>
- </COMPONENTS>
- </ONOS1>
-
- <ONOS2>
- <host>OC2</host>
- <user>sdn</user>
- <password>rocks</password>
- <type>OnosDriver</type>
- <connect_order>10</connect_order>
- <COMPONENTS>
- <prompt></prompt>
- </COMPONENTS>
- </ONOS2>
-
- <ONOS3>
- <host>OC3</host>
- <user>sdn</user>
- <password>rocks</password>
- <type>OnosDriver</type>
- <connect_order>11</connect_order>
- <COMPONENTS>
- <prompt></prompt>
- </COMPONENTS>
- </ONOS3>
-
- <ONOSrest1>
- <host>OC1</host>
- <port>8181</port>
- <user>onos</user>
- <password>rocks</password>
- <type>OnosRestDriver</type>
- <connect_order>2</connect_order>
- <COMPONENTS>
- <prompt></prompt>
- </COMPONENTS>
- </ONOSrest1>
-
- <ONOSrest2>
- <host>OC2</host>
- <port>8181</port>
- <user>onos</user>
- <password>rocks</password>
- <type>OnosRestDriver</type>
- <connect_order>3</connect_order>
- <COMPONENTS>
- <prompt></prompt>
- </COMPONENTS>
- </ONOSrest2>
-
- <ONOSrest3>
- <host>OC3</host>
- <port>8181</port>
- <user>onos</user>
- <password>rocks</password>
- <type>OnosRestDriver</type>
- <connect_order>4</connect_order>
- <COMPONENTS>
- <prompt></prompt>
- </COMPONENTS>
- </ONOSrest3>
-
+ </ONOScell>
<Mininet1>
<host>OCN</host>
<user>sdn</user>
<password>rocks</password>
<type>MininetCliDriver</type>
- <connect_order>7</connect_order>
+ <connect_order>2</connect_order>
<COMPONENTS>
<home>~/mininet/custom/</home>
<prompt></prompt>