blob: 7fda683c9b68eb4ca9d74443cb4627eb81100590 [file] [log] [blame]
class SDNIPperf:
def __init__( self ):
self.default = ''
global branchName
# This case is to setup ONOS
def CASE100( self, main ):
"""
CASE100 is to compile ONOS and push it to the test machines
Startup sequence:
cell <name>
onos-verify-cell
git pull
mvn clean install
onos-package
onos-install -f
onos-wait-for-start
"""
main.case( "Setting up test environment" )
cellName = main.params[ 'ENV' ][ 'cellName' ]
ONOS1Ip = main.params[ 'CTRL' ][ 'ip1' ]
main.step( "Applying cell variable to environment" )
cellResult = main.ONOSbench.setCell( cellName )
verifyResult = main.ONOSbench.verifyCell()
branchName = main.ONOSbench.getBranchName()
main.log.info( "ONOS is on branch: " + branchName )
main.log.report( "Uninstalling ONOS" )
main.ONOSbench.onosUninstall( ONOS1Ip )
cleanInstallResult = main.TRUE
gitPullResult = main.TRUE
main.step( "Git pull" )
gitPullResult = main.FALSE
#Need to push some new code to ONOS before using the git pull
#gitPullResult = main.ONOSbench.gitPull()
main.step( "Using mvn clean install" )
if gitPullResult == main.TRUE:
#cleanInstallResult = main.ONOSbench.cleanInstall()
cleanInstallResult = main.ONOSbench.cleanInstall( skipTest=True)
else:
main.log.warn( "Did not pull new code so skipping mvn " +
"clean install" )
main.ONOSbench.getVersion( report=True )
main.step( "Creating ONOS package" )
packageResult = main.ONOSbench.buckBuild()
main.step( "Installing ONOS package" )
onos1InstallResult = main.ONOSbench.onosInstall( options="-f",
node=ONOS1Ip )
main.step( "Checking if ONOS is up yet" )
for i in range( 2 ):
onos1Isup = main.ONOSbench.isup( ONOS1Ip, timeout=420 )
if onos1Isup:
break
if not onos1Isup:
main.log.report( "ONOS1 didn't start!" )
cliResult = main.ONOScli.startOnosCli( ONOS1Ip,
commandlineTimeout=100, onosStartTimeout=600)
case1Result = ( cleanInstallResult and packageResult and
cellResult and verifyResult and
onos1InstallResult and
onos1Isup and cliResult )
utilities.assert_equals( expect=main.TRUE, actual=case1Result,
onpass="ONOS startup successful",
onfail="ONOS startup NOT successful" )
if case1Result == main.FALSE:
main.cleanup()
main.exit()
def CASE9( self, main ):
"""
Test the SDN-IP Performance
Test whether SDN-IP can boot with 600,000 routes from an external peer.
Since our goal for SDN-IP is to handle 600,000 routes, in this test case
we statically configure an external peer Quagga with 655360 routes.
Thus, we pre-know the routes and intents it should be, and then boot the
whole system and check whether the numbers of routes and intents from
ONOS CLI are correct.
"""
import time
import json
from operator import eq
from time import localtime, strftime
# We configured one external BGP peer with 655360 routes
routeNumberExpected = 655360
m2SIntentsNumberExpected = 655360
main.case("This case is to testing the performance of SDN-IP with \
single ONOS instance" )
time.sleep( 10 )
main.step( "Get devices in the network" )
listResult = main.ONOScli.devices( jsonFormat=False )
main.log.info( listResult )
main.step( "Get links in the network" )
listResult = main.ONOScli.links ( jsonFormat=False )
main.log.info( listResult )
main.log.info( "Activate sdn-ip application" )
main.ONOScli.activateApp( "org.onosproject.sdnip" )
main.step("Sleep 1200 seconds")
# wait until SDN-IP receives all routes and ONOS installs all intents
time.sleep( int(main.params[ 'timers' ][ 'SystemBoot' ]) )
main.step( "Checking routes installed" )
main.log.info( "Total route number expected is:" )
main.log.info( routeNumberExpected )
routeNumberActual = main.ONOScli.ipv4RouteNumber()
main.log.info("Total route number actual is: ")
main.log.info(routeNumberActual)
utilities.assertEquals(
expect=routeNumberExpected, actual=routeNumberActual,
onpass="***Routes in SDN-IP are correct!***",
onfail="***Routes in SDN-IP are wrong!***" )
main.step( "Checking MultiPointToSinglePointIntent intents installed" )
main.log.info( "MultiPointToSinglePoint intent number expected is:" )
main.log.info( m2SIntentsNumberExpected )
m2SIntentsNumberActual = main.ONOScli.m2SIntentInstalledNumber()
main.log.info( "MultiPointToSinglePoint intent number actual is:" )
main.log.info(m2SIntentsNumberActual)
utilities.assertEquals(
expect=True,
actual=eq( m2SIntentsNumberExpected, m2SIntentsNumberActual ),
onpass="***MultiPointToSinglePoint intent number is correct!***",
onfail="***MultiPointToSinglePoint intent number is wrong!***" )