Unify onos startup checks
Change-Id: Ia82f696839608031f67aec8f944156d6231b0177
diff --git a/TestON/tests/CHO/CHOtest/CHOtest.py b/TestON/tests/CHO/CHOtest/CHOtest.py
index 411035d..41f1693 100644
--- a/TestON/tests/CHO/CHOtest/CHOtest.py
+++ b/TestON/tests/CHO/CHOtest/CHOtest.py
@@ -134,16 +134,6 @@
onfail="Test step FAIL" )
installResult = ( installResult and i_result )
- main.step( "Verify ONOS nodes UP status" )
- statusResult = main.TRUE
- for i in range( int( main.numCtrls ) ):
- main.log.info( "ONOS Node " + main.onosIPs[i] + " status:" )
- onos_status = main.ONOSbench.onosStatus( node=main.onosIPs[i] )
- utilities.assert_equals( expect=main.TRUE, actual=onos_status,
- onpass="Test step PASS",
- onfail="Test step FAIL" )
- statusResult = ( statusResult and onos_status )
-
main.step( "Set up ONOS secure SSH" )
secureSshResult = main.TRUE
for i in range( int( main.numCtrls ) ):
@@ -152,6 +142,30 @@
onpass="Test step PASS",
onfail="Test step FAIL" )
+ time.sleep( 5 )
+ main.step( "Starting ONOS service" )
+ stopResult = main.TRUE
+ startResult = main.TRUE
+ onosIsUp = main.TRUE
+ for i in range( main.numCtrls ):
+ onosIsUp = onosIsUp and main.ONOSbench.isup( main.ONOSip[ i ] )
+ if onosIsUp == main.TRUE:
+ main.log.report( "ONOS instance is up and ready" )
+ else:
+ main.log.report( "ONOS instance may not be up, stop and " +
+ "start ONOS again " )
+ for i in range( main.numCtrls ):
+ stopResult = stopResult and \
+ main.ONOSbench.onosStop( main.ONOSip[ i ] )
+ for i in range( main.numCtrls ):
+ startResult = startResult and \
+ main.ONOSbench.onosStart( main.ONOSip[ i ] )
+ stepResult = onosIsUp and stopResult and startResult
+ utilities.assert_equals( expect=main.TRUE,
+ actual=stepResult,
+ onpass="ONOS service is ready",
+ onfail="ONOS service did not start properly" )
+
main.step( "Start ONOS CLI on all nodes" )
cliResult = main.TRUE
main.step(" Start ONOS cli using thread ")
diff --git a/TestON/tests/CHOTestMonkey/CHOTestMonkey.py b/TestON/tests/CHOTestMonkey/CHOTestMonkey.py
index ec64601..78bed55 100644
--- a/TestON/tests/CHOTestMonkey/CHOTestMonkey.py
+++ b/TestON/tests/CHOTestMonkey/CHOTestMonkey.py
@@ -147,16 +147,6 @@
onfail="Test step FAIL" )
installResult = ( installResult and iResult )
- main.step( "Verify ONOS nodes UP status" )
- statusResult = main.TRUE
- for i in range( int( main.numCtrls ) ):
- main.log.info( "ONOS Node " + main.onosIPs[i] + " status:" )
- onos_status = main.ONOSbench.onosStatus( node=main.onosIPs[i] )
- utilities.assert_equals( expect=main.TRUE, actual=onos_status,
- onpass="Test step PASS",
- onfail="Test step FAIL" )
- statusResult = ( statusResult and onos_status )
-
main.step( "Set up ONOS secure SSH" )
secureSshResult = main.TRUE
for i in range( int( main.numCtrls ) ):
@@ -165,6 +155,30 @@
onpass="Test step PASS",
onfail="Test step FAIL" )
+ time.sleep( 5 )
+ main.step( "Starting ONOS service" )
+ stopResult = main.TRUE
+ startResult = main.TRUE
+ onosIsUp = main.TRUE
+ for i in range( main.numCtrls ):
+ onosIsUp = onosIsUp and main.ONOSbench.isup( main.ONOSip[ i ] )
+ if onosIsUp == main.TRUE:
+ main.log.report( "ONOS instance is up and ready" )
+ else:
+ main.log.report( "ONOS instance may not be up, stop and " +
+ "start ONOS again " )
+ for i in range( main.numCtrls ):
+ stopResult = stopResult and \
+ main.ONOSbench.onosStop( main.ONOSip[ i ] )
+ for i in range( main.numCtrls ):
+ startResult = startResult and \
+ main.ONOSbench.onosStart( main.ONOSip[ i ] )
+ stepResult = onosIsUp and stopResult and startResult
+ utilities.assert_equals( expect=main.TRUE,
+ actual=stepResult,
+ onpass="ONOS service is ready",
+ onfail="ONOS service did not start properly" )
+
main.step( "Start ONOS CLI on all nodes" )
cliResult = main.TRUE
startCliResult = main.TRUE
diff --git a/TestON/tests/SCPF/SCPFhostLat/SCPFhostLat.py b/TestON/tests/SCPF/SCPFhostLat/SCPFhostLat.py
index 42159b4..6c382e4 100644
--- a/TestON/tests/SCPF/SCPFhostLat/SCPFhostLat.py
+++ b/TestON/tests/SCPF/SCPFhostLat/SCPFhostLat.py
@@ -167,16 +167,6 @@
onpass="Test step PASS",
onfail="Test step FAIL" )
installResult = installResult and i_result
- time.sleep( main.startUpSleep )
- main.step( "Verify ONOS nodes UP status" )
- statusResult = main.TRUE
- for i in range( int( main.numCtrls ) ):
- main.log.info( "ONOS Node " + main.ONOSip[i] + " status:" )
- onos_status = main.ONOSbench.onosStatus( node=main.ONOSip[i] )
- utilities.assert_equals( expect=main.TRUE, actual=onos_status,
- onpass="Test step PASS",
- onfail="Test step FAIL" )
- statusResult = ( statusResult and onos_status )
main.step( "Set up ONOS secure SSH" )
secureSshResult = main.TRUE
@@ -186,6 +176,31 @@
onpass="Test step PASS",
onfail="Test step FAIL" )
+ time.sleep( main.startUpSleep )
+ main.step( "Starting ONOS service" )
+ stopResult = main.TRUE
+ startResult = main.TRUE
+ onosIsUp = main.TRUE
+
+ for i in range( main.numCtrls ):
+ onosIsUp = onosIsUp and main.ONOSbench.isup( main.ONOSip[ i ] )
+ if onosIsUp == main.TRUE:
+ main.log.report( "ONOS instance is up and ready" )
+ else:
+ main.log.report( "ONOS instance may not be up, stop and " +
+ "start ONOS again " )
+ for i in range( main.numCtrls ):
+ stopResult = stopResult and \
+ main.ONOSbench.onosStop( main.ONOSip[ i ] )
+ for i in range( main.numCtrls ):
+ startResult = startResult and \
+ main.ONOSbench.onosStart( main.ONOSip[ i ] )
+ stepResult = onosIsUp and stopResult and startResult
+ utilities.assert_equals( expect=main.TRUE,
+ actual=stepResult,
+ onpass="ONOS service is ready",
+ onfail="ONOS service did not start properly" )
+
main.step( "Start ONOS CLI on all nodes" )
cliResult = main.TRUE
main.step(" Start ONOS cli using thread ")
diff --git a/TestON/tests/SCPF/SCPFintentEventTp/SCPFintentEventTp.py b/TestON/tests/SCPF/SCPFintentEventTp/SCPFintentEventTp.py
index 42c3522..3e221a5 100644
--- a/TestON/tests/SCPF/SCPFintentEventTp/SCPFintentEventTp.py
+++ b/TestON/tests/SCPF/SCPFintentEventTp/SCPFintentEventTp.py
@@ -166,17 +166,6 @@
onfail="Test step FAIL")
installResult = installResult and i_result
- main.step( "Verify ONOS nodes UP status" )
- statusResult = main.TRUE
- for i in range( int( main.numCtrls ) ):
- main.log.info( "ONOS Node " + main.ONOSip[i] + " status:" )
- onos_status = main.ONOSbench.onosStatus(node=main.ONOSip[i])
- utilities.assert_equals(expect=main.TRUE, actual=onos_status,
- onpass="Test step PASS",
- onfail="Test step FAIL")
- statusResult = (statusResult and onos_status)
- time.sleep(2)
-
main.step( "Set up ONOS secure SSH" )
secureSshResult = main.TRUE
for i in range( int( main.numCtrls ) ):
@@ -185,6 +174,30 @@
onpass="Test step PASS",
onfail="Test step FAIL" )
+ time.sleep( main.startUpSleep )
+ main.step( "Starting ONOS service" )
+ stopResult = main.TRUE
+ startResult = main.TRUE
+ onosIsUp = main.TRUE
+ for i in range( main.numCtrls ):
+ onosIsUp = onosIsUp and main.ONOSbench.isup( main.ONOSip[ i ] )
+ if onosIsUp == main.TRUE:
+ main.log.report( "ONOS instance is up and ready" )
+ else:
+ main.log.report( "ONOS instance may not be up, stop and " +
+ "start ONOS again " )
+ for i in range( main.numCtrls ):
+ stopResult = stopResult and \
+ main.ONOSbench.onosStop( main.ONOSip[ i ] )
+ for i in range( main.numCtrls ):
+ startResult = startResult and \
+ main.ONOSbench.onosStart( main.ONOSip[ i ] )
+ stepResult = onosIsUp and stopResult and startResult
+ utilities.assert_equals( expect=main.TRUE,
+ actual=stepResult,
+ onpass="ONOS service is ready",
+ onfail="ONOS service did not start properly" )
+
main.step( "Start ONOS cli using thread" )
startCliResult = main.TRUE
pool = []
diff --git a/TestON/tests/SCPF/SCPFintentInstallWithdrawLat/SCPFintentInstallWithdrawLat.py b/TestON/tests/SCPF/SCPFintentInstallWithdrawLat/SCPFintentInstallWithdrawLat.py
index 1c04fd1..412ef29 100644
--- a/TestON/tests/SCPF/SCPFintentInstallWithdrawLat/SCPFintentInstallWithdrawLat.py
+++ b/TestON/tests/SCPF/SCPFintentInstallWithdrawLat/SCPFintentInstallWithdrawLat.py
@@ -164,16 +164,6 @@
onfail="Test step FAIL")
installResult = installResult and i_result
- main.step("Verify ONOS nodes UP status")
- statusResult = main.TRUE
- for i in range(int(main.numCtrls)):
- main.log.info("ONOS Node " + main.ONOSip[i] + " status:")
- onos_status = main.ONOSbench.onosStatus(node=main.ONOSip[i])
- utilities.assert_equals(expect=main.TRUE, actual=onos_status,
- onpass="Test step PASS",
- onfail="Test step FAIL")
- statusResult = (statusResult and onos_status)
-
main.step( "Set up ONOS secure SSH" )
secureSshResult = main.TRUE
for i in range( int( main.numCtrls ) ):
@@ -182,6 +172,30 @@
onpass="Test step PASS",
onfail="Test step FAIL" )
+ time.sleep( main.startUpSleep )
+ main.step( "Starting ONOS service" )
+ stopResult = main.TRUE
+ startResult = main.TRUE
+ onosIsUp = main.TRUE
+ for i in range( main.numCtrls ):
+ onosIsUp = onosIsUp and main.ONOSbench.isup( main.ONOSip[ i ] )
+ if onosIsUp == main.TRUE:
+ main.log.report( "ONOS instance is up and ready" )
+ else:
+ main.log.report( "ONOS instance may not be up, stop and " +
+ "start ONOS again " )
+ for i in range( main.numCtrls ):
+ stopResult = stopResult and \
+ main.ONOSbench.onosStop( main.ONOSip[ i ] )
+ for i in range( main.numCtrls ):
+ startResult = startResult and \
+ main.ONOSbench.onosStart( main.ONOSip[ i ] )
+ stepResult = onosIsUp and stopResult and startResult
+ utilities.assert_equals( expect=main.TRUE,
+ actual=stepResult,
+ onpass="ONOS service is ready",
+ onfail="ONOS service did not start properly" )
+
time.sleep(2)
main.step("Start ONOS CLI on all nodes")
cliResult = main.TRUE
diff --git a/TestON/tests/SCPF/SCPFportLat/SCPFportLat.py b/TestON/tests/SCPF/SCPFportLat/SCPFportLat.py
index 59dc3a1..ae38911 100644
--- a/TestON/tests/SCPF/SCPFportLat/SCPFportLat.py
+++ b/TestON/tests/SCPF/SCPFportLat/SCPFportLat.py
@@ -168,17 +168,6 @@
onfail="Test step FAIL")
installResult = installResult and i_result
- main.step( "Verify ONOS nodes UP status" )
- statusResult = main.TRUE
- for i in range( int( main.numCtrls ) ):
- main.log.info( "ONOS Node " + main.ONOSip[i] + " status:" )
- onos_status = main.ONOSbench.onosStatus( node=main.ONOSip[i] )
- utilities.assert_equals(expect=main.TRUE, actual=onos_status,
- onpass="Test step PASS",
- onfail="Test step FAIL")
- statusResult = statusResult and onos_status
- time.sleep(2)
-
main.step( "Set up ONOS secure SSH" )
secureSshResult = main.TRUE
for i in range( int( main.numCtrls ) ):
@@ -187,6 +176,30 @@
onpass="Test step PASS",
onfail="Test step FAIL" )
+ time.sleep( main.startUpSleep )
+ main.step( "Starting ONOS service" )
+ stopResult = main.TRUE
+ startResult = main.TRUE
+ onosIsUp = main.TRUE
+ for i in range( main.numCtrls ):
+ onosIsUp = onosIsUp and main.ONOSbench.isup( main.ONOSip[ i ] )
+ if onosIsUp == main.TRUE:
+ main.log.report( "ONOS instance is up and ready" )
+ else:
+ main.log.report( "ONOS instance may not be up, stop and " +
+ "start ONOS again " )
+ for i in range( main.numCtrls ):
+ stopResult = stopResult and \
+ main.ONOSbench.onosStop( main.ONOSip[ i ] )
+ for i in range( main.numCtrls ):
+ startResult = startResult and \
+ main.ONOSbench.onosStart( main.ONOSip[ i ] )
+ stepResult = onosIsUp and stopResult and startResult
+ utilities.assert_equals( expect=main.TRUE,
+ actual=stepResult,
+ onpass="ONOS service is ready",
+ onfail="ONOS service did not start properly" )
+
main.step( "Start ONOS CLI on all nodes" )
cliResult = main.TRUE
main.step( " Start ONOS cli using thread " )
diff --git a/TestON/tests/SCPF/SCPFscalingMaxIntents/SCPFscalingMaxIntents.py b/TestON/tests/SCPF/SCPFscalingMaxIntents/SCPFscalingMaxIntents.py
index a7a7bc5..46714ac 100644
--- a/TestON/tests/SCPF/SCPFscalingMaxIntents/SCPFscalingMaxIntents.py
+++ b/TestON/tests/SCPF/SCPFscalingMaxIntents/SCPFscalingMaxIntents.py
@@ -192,16 +192,6 @@
onfail="Test step FAIL" )
installResult = installResult and i_result
- main.step( "Verify ONOS nodes UP status" )
- statusResult = main.TRUE
- for i in range( int( main.numCtrls ) ):
- main.log.info( "ONOS Node " + main.ONOSip[i] + " status:" )
- onos_status = main.ONOSbench.onosStatus( node=main.ONOSip[i] )
- utilities.assert_equals( expect=main.TRUE, actual=onos_status,
- onpass="Test step PASS",
- onfail="Test step FAIL" )
- statusResult = ( statusResult and onos_status )
-
main.step( "Set up ONOS secure SSH" )
secureSshResult = main.TRUE
for i in range( int( main.numCtrls ) ):
@@ -210,6 +200,30 @@
onpass="Test step PASS",
onfail="Test step FAIL" )
+ time.sleep( main.startUpSleep )
+ main.step( "Starting ONOS service" )
+ stopResult = main.TRUE
+ startResult = main.TRUE
+ onosIsUp = main.TRUE
+ for i in range( main.numCtrls ):
+ onosIsUp = onosIsUp and main.ONOSbench.isup( main.ONOSip[ i ] )
+ if onosIsUp == main.TRUE:
+ main.log.report( "ONOS instance is up and ready" )
+ else:
+ main.log.report( "ONOS instance may not be up, stop and " +
+ "start ONOS again " )
+ for i in range( main.numCtrls ):
+ stopResult = stopResult and \
+ main.ONOSbench.onosStop( main.ONOSip[ i ] )
+ for i in range( main.numCtrls ):
+ startResult = startResult and \
+ main.ONOSbench.onosStart( main.ONOSip[ i ] )
+ stepResult = onosIsUp and stopResult and startResult
+ utilities.assert_equals( expect=main.TRUE,
+ actual=stepResult,
+ onpass="ONOS service is ready",
+ onfail="ONOS service did not start properly" )
+
main.step( "Start ONOS CLI on all nodes" )
cliResult = main.TRUE
main.step(" Start ONOS cli using thread ")
diff --git a/TestON/tests/SCPF/SCPFswitchLat/SCPFswitchLat.py b/TestON/tests/SCPF/SCPFswitchLat/SCPFswitchLat.py
index 3fef087..46a5f47 100644
--- a/TestON/tests/SCPF/SCPFswitchLat/SCPFswitchLat.py
+++ b/TestON/tests/SCPF/SCPFswitchLat/SCPFswitchLat.py
@@ -171,16 +171,6 @@
onfail="Test step FAIL")
installResult = installResult and i_result
- main.step("Verify ONOS nodes UP status")
- statusResult = main.TRUE
- for i in range(int(main.numCtrls)):
- main.log.info("ONOS Node " + main.ONOSip[i] + " status:")
- onos_status = main.ONOSbench.onosStatus(node=main.ONOSip[i])
- utilities.assert_equals(expect=main.TRUE, actual=onos_status,
- onpass="Test step PASS",
- onfail="Test step FAIL")
- statusResult = (statusResult and onos_status)
-
main.step( "Set up ONOS secure SSH" )
secureSshResult = main.TRUE
for i in range( int( main.numCtrls ) ):
@@ -189,6 +179,30 @@
onpass="Test step PASS",
onfail="Test step FAIL" )
+ time.sleep( main.startUpSleep )
+ main.step( "Starting ONOS service" )
+ stopResult = main.TRUE
+ startResult = main.TRUE
+ onosIsUp = main.TRUE
+ for i in range( main.numCtrls ):
+ onosIsUp = onosIsUp and main.ONOSbench.isup( main.ONOSip[ i ] )
+ if onosIsUp == main.TRUE:
+ main.log.report( "ONOS instance is up and ready" )
+ else:
+ main.log.report( "ONOS instance may not be up, stop and " +
+ "start ONOS again " )
+ for i in range( main.numCtrls ):
+ stopResult = stopResult and \
+ main.ONOSbench.onosStop( main.ONOSip[ i ] )
+ for i in range( main.numCtrls ):
+ startResult = startResult and \
+ main.ONOSbench.onosStart( main.ONOSip[ i ] )
+ stepResult = onosIsUp and stopResult and startResult
+ utilities.assert_equals( expect=main.TRUE,
+ actual=stepResult,
+ onpass="ONOS service is ready",
+ onfail="ONOS service did not start properly" )
+
time.sleep(2)
main.step("Start ONOS CLI on all nodes")
cliResult = main.TRUE