Run codecheck script on FUNCintentRest
Change-Id: I742ce07a01a541ecaab5edadbf59553f51b0d78c
diff --git a/TestON/tests/FUNC/FUNCintentRest/dependencies/FuncIntentFunction.py b/TestON/tests/FUNC/FUNCintentRest/dependencies/FuncIntentFunction.py
old mode 100755
new mode 100644
index 8fa65f2..4bbbd9f
--- a/TestON/tests/FUNC/FUNCintentRest/dependencies/FuncIntentFunction.py
+++ b/TestON/tests/FUNC/FUNCintentRest/dependencies/FuncIntentFunction.py
@@ -8,9 +8,11 @@
import json
import types
+
def __init__( self ):
self.default = ''
+
def installHostIntent( main,
name,
host1,
@@ -55,7 +57,6 @@
ipProto - IP protocol
tcp - TCP ports in the same order as the hosts in hostNames
"""
-
assert main, "There is no main variable"
assert host1, "You must specify host1"
assert host2, "You must specify host2"
@@ -81,8 +82,8 @@
main.log.info( itemName + ": Adding host intents" )
intent1 = main.RESTs[ onosNode ].addHostIntent( hostIdOne=host1.get( "id" ),
- hostIdTwo=host2.get( "id" ),
- vlanId=vlanId )
+ hostIdTwo=host2.get( "id" ),
+ vlanId=vlanId )
# Get all intents ID in the system, time delay right after intents are added
time.sleep( main.addIntentSleep )
@@ -108,6 +109,7 @@
main.assertReturnString += 'Install Intent State Failed\n'
return main.FALSE
+
def testHostIntent( main,
name,
intentId,
@@ -160,7 +162,6 @@
switches are down
"""
-
# Parameter Validity Check
assert main, "There is no main variable"
assert host1, "You must specify host1"
@@ -297,6 +298,7 @@
return testResult
+
def installPointIntent( main,
name,
senders,
@@ -346,7 +348,6 @@
be two links lower than the links before the two
switches are down
"""
-
assert main, "There is no main variable"
assert senders, "You must specify a sender"
assert recipients, "You must specify a recipient"
@@ -370,7 +371,6 @@
recipient[ "device" ] = main.hostsData.get( recipient.get( "name" ) ).get( "location" )
vlanId = senders[ 0 ].get( "vlanId" )
-
ingressDevice = senders[ 0 ].get( "device" )
egressDevice = recipients[ 0 ].get( "device" )
@@ -427,6 +427,7 @@
main.assertReturnString += 'Install Intent State Failed\n'
return main.FALSE
+
def testPointIntent( main,
name,
intentId,
@@ -494,7 +495,6 @@
switches are down
"""
-
# Parameter Validity Check
assert main, "There is no main variable"
assert senders, "You must specify a sender"
@@ -523,7 +523,7 @@
if not recipient.get( "device" ):
main.log.warn( "Device not given for recipient {0}. Loading from main.hostData".format( recipient.get( "name" ) ) )
recipient[ "device" ] = main.hostsData.get( recipient.get( "name" ) ).get( "location" )
- vlanId=senders[ 0 ].get( "vlanId" )
+ vlanId = senders[ 0 ].get( "vlanId" )
except( KeyError, TypeError ):
main.log.error( "There was a problem loading the hosts data." )
return main.FALSE
@@ -546,7 +546,7 @@
testResult = main.FALSE
# Check Connectivity
- if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE, args=( main, senderNames, recipientNames, vlanId, useTCP ) ):
+ if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE, args=( main, senderNames, recipientNames, vlanId, useTCP ) ):
main.assertReturnString += 'Initial Ping Passed\n'
else:
main.assertReturnString += 'Initial Ping Failed\n'
@@ -555,7 +555,7 @@
# Check connections that shouldn't work
if badSenderNames:
main.log.info( "Checking that packets from incorrect sender do not go through" )
- if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE, args=( main, badSenderNames, recipientNames ), kwargs={ "expectFailure":True } ):
+ if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE, args=( main, badSenderNames, recipientNames ), kwargs={ "expectFailure": True } ):
main.assertReturnString += 'Bad Sender Ping Passed\n'
else:
main.assertReturnString += 'Bad Sender Ping Failed\n'
@@ -563,7 +563,7 @@
if badRecipientNames:
main.log.info( "Checking that packets to incorrect recipients do not go through" )
- if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE, args=( main, senderNames, badRecipientNames ), kwargs={ "expectFailure":True } ):
+ if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE, args=( main, senderNames, badRecipientNames ), kwargs={ "expectFailure": True } ):
main.assertReturnString += 'Bad Recipient Ping Passed\n'
else:
main.assertReturnString += 'Bad Recipient Ping Failed\n'
@@ -580,14 +580,14 @@
if protected:
# Check Connection
- if utilities.retry(f=scapyCheckConnection, retValue=main.FALSE,
- args=(main, senderNames, recipientNames, vlanId, useTCP)):
+ if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE,
+ args=( main, senderNames, recipientNames, vlanId, useTCP ) ):
main.assertReturnString += 'Link down Scapy Packet Received Passed\n'
else:
main.assertReturnString += 'Link down Scapy Packet Recieved Failed\n'
testResult = main.FALSE
- if ProtectedIntentCheck(main):
+ if ProtectedIntentCheck( main ):
main.assertReturnString += 'Protected Intent Check Passed\n'
else:
main.assertReturnString += 'Protected Intent Check Failed\n'
@@ -615,7 +615,7 @@
testResult = main.FALSE
# Check Connection
- if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE, args=( main, senderNames, recipientNames, vlanId, useTCP ) ):
+ if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE, args=( main, senderNames, recipientNames, vlanId, useTCP ) ):
main.assertReturnString += 'Link Down Pingall Passed\n'
else:
main.assertReturnString += 'Link Down Pingall Failed\n'
@@ -653,7 +653,7 @@
testResult = main.FALSE
# Check Connection
- if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE, args=( main, senderNames, recipientNames, vlanId, useTCP ) ):
+ if utilities.retry( f=scapyCheckConnection, retValue=main.FALSE, args=( main, senderNames, recipientNames, vlanId, useTCP ) ):
main.assertReturnString += 'Link Up Scapy Packet Received Passed\n'
else:
main.assertReturnString += 'Link Up Scapy Packet Recieved Failed\n'
@@ -668,6 +668,7 @@
return testResult
+
def pointIntentTcp( main,
name,
host1,
@@ -690,7 +691,6 @@
sw1="",
sw2="",
expectedLink=0 ):
-
"""
Description:
Verify add-point-intent only for TCP
@@ -740,7 +740,6 @@
be two links lower than the links before the two
switches are down
"""
-
assert main, "There is no main variable"
assert name, "variable name is empty"
assert host1 and host2, "You must specify hosts"
@@ -764,64 +763,64 @@
# Adding bidirectional point intents
main.log.info( itemName + ": Adding point intents" )
intent1 = main.RESTs[ onosNode ].addPointIntent( ingressDevice=deviceId1,
- egressDevice=deviceId2,
- ingressPort=port1,
- egressPort=port2,
- ethType=ethType,
- ethSrc=mac1,
- ethDst=mac2,
- bandwidth=bandwidth,
- lambdaAlloc=lambdaAlloc,
- ipProto=ipProto,
- ipSrc=ip1,
- ipDst=ip2,
- tcpSrc=tcp1,
- tcpDst="" )
+ egressDevice=deviceId2,
+ ingressPort=port1,
+ egressPort=port2,
+ ethType=ethType,
+ ethSrc=mac1,
+ ethDst=mac2,
+ bandwidth=bandwidth,
+ lambdaAlloc=lambdaAlloc,
+ ipProto=ipProto,
+ ipSrc=ip1,
+ ipDst=ip2,
+ tcpSrc=tcp1,
+ tcpDst="" )
intent2 = main.RESTs[ onosNode ].addPointIntent( ingressDevice=deviceId2,
- egressDevice=deviceId1,
- ingressPort=port2,
- egressPort=port1,
- ethType=ethType,
- ethSrc=mac2,
- ethDst=mac1,
- bandwidth=bandwidth,
- lambdaAlloc=lambdaAlloc,
- ipProto=ipProto,
- ipSrc=ip2,
- ipDst=ip1,
- tcpSrc=tcp2,
- tcpDst="" )
+ egressDevice=deviceId1,
+ ingressPort=port2,
+ egressPort=port1,
+ ethType=ethType,
+ ethSrc=mac2,
+ ethDst=mac1,
+ bandwidth=bandwidth,
+ lambdaAlloc=lambdaAlloc,
+ ipProto=ipProto,
+ ipSrc=ip2,
+ ipDst=ip1,
+ tcpSrc=tcp2,
+ tcpDst="" )
intent3 = main.RESTs[ onosNode ].addPointIntent( ingressDevice=deviceId1,
- egressDevice=deviceId2,
- ingressPort=port1,
- egressPort=port2,
- ethType=ethType,
- ethSrc=mac1,
- ethDst=mac2,
- bandwidth=bandwidth,
- lambdaAlloc=lambdaAlloc,
- ipProto=ipProto,
- ipSrc=ip1,
- ipDst=ip2,
- tcpSrc="",
- tcpDst=tcp2 )
+ egressDevice=deviceId2,
+ ingressPort=port1,
+ egressPort=port2,
+ ethType=ethType,
+ ethSrc=mac1,
+ ethDst=mac2,
+ bandwidth=bandwidth,
+ lambdaAlloc=lambdaAlloc,
+ ipProto=ipProto,
+ ipSrc=ip1,
+ ipDst=ip2,
+ tcpSrc="",
+ tcpDst=tcp2 )
intent4 = main.RESTs[ onosNode ].addPointIntent( ingressDevice=deviceId2,
- egressDevice=deviceId1,
- ingressPort=port2,
- egressPort=port1,
- ethType=ethType,
- ethSrc=mac2,
- ethDst=mac1,
- bandwidth=bandwidth,
- lambdaAlloc=lambdaAlloc,
- ipProto=ipProto,
- ipSrc=ip2,
- ipDst=ip1,
- tcpSrc="",
- tcpDst=tcp1 )
+ egressDevice=deviceId1,
+ ingressPort=port2,
+ egressPort=port1,
+ ethType=ethType,
+ ethSrc=mac2,
+ ethDst=mac1,
+ bandwidth=bandwidth,
+ lambdaAlloc=lambdaAlloc,
+ ipProto=ipProto,
+ ipSrc=ip2,
+ ipDst=ip1,
+ tcpSrc="",
+ tcpDst=tcp1 )
# Get all intents ID in the system, time delay right after intents are added
time.sleep( main.addIntentSleep )
@@ -925,8 +924,8 @@
in the same order index wise. All devices in the list should have the
same format, either all the devices have its port or it doesn't.
eg. hostName = [ 'h1', 'h2' ,.. ]
- devices = [ 'of:0000000000000001', 'of:0000000000000002', ...]
- ports = [ '1', '1', ..]
+ devices = [ 'of:0000000000000001', 'of:0000000000000002', ... ]
+ ports = [ '1', '1', .. ]
...
Description:
Verify add-single-to-multi-intent iterates through the list of given
@@ -973,7 +972,6 @@
be two links lower than the links before the two
switches are down
"""
-
assert main, "There is no main variable"
assert senders, "You must specify a sender"
assert recipients, "You must specify a recipient"
@@ -1055,6 +1053,7 @@
main.log.error( "Single to Multi Intent did not install correctly" )
return main.FALSE
+
def multiToSingleIntent( main,
name,
hostNames,
@@ -1077,8 +1076,8 @@
same order index wise. All devices in the list should have the same
format, either all the devices have its port or it doesn't.
eg. hostName = [ 'h1', 'h2' ,.. ]
- devices = [ 'of:0000000000000001', 'of:0000000000000002', ...]
- ports = [ '1', '1', ..]
+ devices = [ 'of:0000000000000001', 'of:0000000000000002', ... ]
+ ports = [ '1', '1', .. ]
...
Description:
Verify add-multi-to-single-intent
@@ -1124,7 +1123,6 @@
be two links lower than the links before the two
switches are down
"""
-
assert main, "There is no main variable"
assert hostNames, "You must specify hosts"
assert devices or main.hostsData, "You must specify devices"
@@ -1159,11 +1157,11 @@
devices = []
main.log.info( "multiToSingleIntent function is using main.hostsData" )
for host in hostNames:
- devices.append( main.hostsData.get( host ).get( 'location' ) )
- macsDict[ main.hostsData.get( host ).get( 'location' ) ] = \
- main.hostsData.get( host ).get( 'mac' )
- ipDict[ main.hostsData.get( host ).get( 'location' ) ] = \
- main.hostsData.get( host ).get( 'ipAddresses' )
+ devices.append( main.hostsData.get( host ).get( 'location' ) )
+ macsDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+ main.hostsData.get( host ).get( 'mac' )
+ ipDict[ main.hostsData.get( host ).get( 'location' ) ] = \
+ main.hostsData.get( host ).get( 'ipAddresses' )
#print main.hostsData
#print 'host names = ', hostNames
@@ -1202,7 +1200,7 @@
dstMac = ""
else:
dstMac = macsDict[ egressDevice ]
- if dstMac == None:
+ if dstMac is None:
main.log.debug( "There is no MAC in device - " + egressDevice )
dstMac = ""
@@ -1298,6 +1296,7 @@
return stepResult
+
def pingallHosts( main, hostList ):
# Ping all host in the hosts list variable
print "Pinging : ", hostList
@@ -1305,11 +1304,11 @@
pingResult = main.Mininet1.pingallHosts( hostList )
return pingResult
+
def getHostsData( main, hostList ):
"""
Use fwd app and pingall to discover all the hosts
"""
-
activateResult = main.TRUE
appCheck = main.TRUE
getDataResult = main.TRUE
@@ -1353,6 +1352,7 @@
return getDataResult
+
def checkTopology( main, expectedLink ):
statusResult = main.TRUE
# Check onos topology
@@ -1360,7 +1360,7 @@
for i in range( main.numCtrls ):
statusResult = main.RESTs[ i ].checkStatus( main.numSwitch,
- expectedLink )\
+ expectedLink )\
and statusResult
if not statusResult:
main.log.error( itemName + ": Topology mismatch" )
@@ -1368,12 +1368,12 @@
main.log.info( itemName + ": Topology match" )
return statusResult
+
def checkIntentState( main, intentsId ):
"""
This function will check intent state to make sure all the intents
are in INSTALLED state
"""
-
intentResult = main.TRUE
results = []
@@ -1406,13 +1406,15 @@
return intentResult
+
def checkFlowsState( main ):
main.log.info( itemName + ": Check flows state" )
checkFlowsResult = main.RESTs[ 0 ].checkFlowsState()
return checkFlowsResult
-def link( main, sw1, sw2, option):
+
+def link( main, sw1, sw2, option ):
# link down
main.log.info( itemName + ": Bring link " + option + "between " +
@@ -1420,15 +1422,15 @@
linkResult = main.Mininet1.link( end1=sw1, end2=sw2, option=option )
return linkResult
+
def removeAllIntents( main ):
"""
Remove all intents in the intentsId
"""
-
onosSummary = []
removeIntentResult = main.TRUE
# Remove intents
- removeIntentResult = main.RESTs[ 0 ].removeAllIntents( )
+ removeIntentResult = main.RESTs[ 0 ].removeAllIntents()
if removeIntentResult:
main.log.info( itemName + ": There are no more intents remaining, " +
@@ -1436,18 +1438,18 @@
return removeIntentResult
+
def checkFlowsCount( main ):
"""
Check flows count in each node
"""
-
flowsCount = []
main.log.info( itemName + ": Checking flows count in each ONOS node" )
for i in range( main.numCtrls ):
flowsCount.append( len( json.loads( main.RESTs[ i ].flows() ) ) )
if flowsCount:
- if all( flows==flowsCount[ 0 ] for flows in flowsCount ):
+ if all( flows == flowsCount[ 0 ] for flows in flowsCount ):
main.log.info( itemName + ": There are " + str( flowsCount[ 0 ] ) +
" flows in all ONOS node" )
else:
@@ -1460,6 +1462,7 @@
return main.TRUE
+
def sendDiscoveryArp( main, hosts=None ):
"""
Sends Discovery ARP packets from each host provided
@@ -1469,7 +1472,7 @@
if not hosts:
hosts = main.scapyHosts
for host in hosts:
- pkt = 'Ether( src="{0}")/ARP( psrc="{1}")'.format( host.hostMac ,host.hostIp )
+ pkt = 'Ether( src="{0}")/ARP( psrc="{1}")'.format( host.hostMac, host.hostIp )
# Send from the VLAN interface if there is one so ONOS discovers the VLAN correctly
iface = None
for interface in host.getIfList():
@@ -1480,6 +1483,7 @@
host.sendPacket( packet=pkt, iface=iface )
main.log.info( "Sending ARP packet from {0}".format( host.name ) )
+
def confirmHostDiscovery( main ):
"""
Confirms that all ONOS nodes have discovered all scapy hosts
@@ -1510,7 +1514,7 @@
onosHostIPs = [ x.get( "ipAddresses" )[ 0 ]
for x in hostData
if len( x.get( "ipAddresses" ) ) > 0 ]
- if not set( collections.Counter( scapyHostIPs ) ).issubset( set ( collections.Counter( onosHostIPs ) ) ):
+ if not set( collections.Counter( scapyHostIPs ) ).issubset( set( collections.Counter( onosHostIPs ) ) ):
main.log.warn( "Controller {0} only sees nodes with {1} IPs. It should see all of the following: {2}".format( controllerStr, onosHostIPs, scapyHostIPs ) )
hostFails.append( controllerStr )
else:
@@ -1526,6 +1530,7 @@
else:
return main.TRUE
+
def populateHostData( main ):
"""
Populates hostsData
@@ -1552,7 +1557,7 @@
main.log.error( "ValueError while populating hostsData" )
return main.FALSE
except KeyError:
- main.log.error( "KeyError while populating hostsData")
+ main.log.error( "KeyError while populating hostsData" )
return main.FALSE
except IndexError:
main.log.error( "IndexError while populating hostsData" )
@@ -1561,6 +1566,7 @@
main.log.error( "TypeError while populating hostsData" )
return main.FALSE
+
def scapyCheckConnection( main, senders, recipients, vlanId=None, useTCP=False, packet=None, packetFilter=None, expectFailure=False ):
"""
Checks the connectivity between all given sender hosts and all given recipient hosts
@@ -1602,9 +1608,9 @@
continue
if vlanId:
- recipientComp.startFilter( pktFilter = ( "vlan {}".format( vlanId ) + " && " + packetFilter.format( senderComp.hostMac ) ) )
+ recipientComp.startFilter( pktFilter=( "vlan {}".format( vlanId ) + " && " + packetFilter.format( senderComp.hostMac ) ) )
else:
- recipientComp.startFilter( pktFilter = packetFilter.format( senderComp.hostMac ) )
+ recipientComp.startFilter( pktFilter=packetFilter.format( senderComp.hostMac ) )
if not packet:
if vlanId:
@@ -1625,24 +1631,25 @@
if vlanId:
senderComp.sendPacket( iface=( "{0}-eth0.{1}".format( sender, vlanId ) ), packet = pkt )
else:
- senderComp.sendPacket( packet = pkt )
+ senderComp.sendPacket( packet=pkt )
if recipientComp.checkFilter( timeout ):
if expectFailure:
- main.log.error( "Packet from {0} successfully received by {1} when it should not have been".format( sender , recipient ) )
+ main.log.error( "Packet from {0} successfully received by {1} when it should not have been".format( sender, recipient ) )
connectionsFunctional = main.FALSE
else:
- main.log.info( "Packet from {0} successfully received by {1}".format( sender , recipient ) )
+ main.log.info( "Packet from {0} successfully received by {1}".format( sender, recipient ) )
else:
recipientComp.killFilter()
if expectFailure:
- main.log.info( "As expected, packet from {0} was not received by {1}".format( sender , recipient ) )
+ main.log.info( "As expected, packet from {0} was not received by {1}".format( sender, recipient ) )
else:
- main.log.error( "Packet from {0} was not received by {1}".format( sender , recipient ) )
+ main.log.error( "Packet from {0} was not received by {1}".format( sender, recipient ) )
connectionsFunctional = main.FALSE
return connectionsFunctional
+
def checkLeaderChange( leaders1, leaders2 ):
"""
Checks for a change in intent partition leadership.
@@ -1656,7 +1663,7 @@
try:
leaders1 = json.loads( leaders1 )
leaders2 = json.loads( leaders2 )
- except ( AttributeError, TypeError):
+ except ( AttributeError, TypeError ):
main.log.exception( self.name + ": Object not as expected" )
return main.FALSE
except Exception:
@@ -1669,12 +1676,12 @@
if "intent" in dict1.get( "topic", [] ):
for dict2 in leaders2:
if dict1.get( "topic", 0 ) == dict2.get( "topic", 0 ) and \
- dict1.get( "leader", 0 ) != dict2.get( "leader", 0 ):
+ dict1.get( "leader", 0 ) != dict2.get( "leader", 0 ):
mismatch = True
- main.log.error( "{0} changed leader from {1} to {2}".\
- format( dict1.get( "topic", "no-topic" ),\
- dict1.get( "leader", "no-leader" ),\
- dict2.get( "leader", "no-leader" ) ) )
+ main.log.error( "{0} changed leader from {1} to {2}".
+ format( dict1.get( "topic", "no-topic" ),
+ dict1.get( "leader", "no-leader" ),
+ dict2.get( "leader", "no-leader" ) ) )
if mismatch:
return main.FALSE
else:
@@ -1697,20 +1704,21 @@
main.log.info( "ERROR report: \n" )
for i in range( main.numCtrls ):
main.ONOSbench.logReport( main.ONOSip[ i ],
- [ "ERROR" ],
- "d" )
+ [ "ERROR" ],
+ "d" )
main.log.info( "EXCEPTIONS report: \n" )
for i in range( main.numCtrls ):
main.ONOSbench.logReport( main.ONOSip[ i ],
- [ "Except" ],
- "d" )
+ [ "Except" ],
+ "d" )
main.log.info( "WARNING report: \n" )
for i in range( main.numCtrls ):
main.ONOSbench.logReport( main.ONOSip[ i ],
- [ "WARN" ],
- "d" )
+ [ "WARN" ],
+ "d" )
+
def flowDuration( main ):
"""
@@ -1750,9 +1758,10 @@
return main.FALSE
return main.TRUE
+
def ProtectedIntentCheck( main ):
intent = main.RESTs[ 0 ].intents()
- main.log.debug(intent)
+ main.log.debug( intent )
main.stop()
if "Protection" in intent:
return main.TRUE
diff --git a/TestON/tests/FUNC/FUNCintentRest/dependencies/startUp.py b/TestON/tests/FUNC/FUNCintentRest/dependencies/startUp.py
index bf2a2b6..8122586 100644
--- a/TestON/tests/FUNC/FUNCintentRest/dependencies/startUp.py
+++ b/TestON/tests/FUNC/FUNCintentRest/dependencies/startUp.py
@@ -1,16 +1,15 @@
"""
This wrapper function is use for starting up onos instance
"""
-
import time
import os
import json
+
def onosBuild( main, gitBranch ):
"""
This includes pulling ONOS and building it using maven install
"""
-
buildResult = main.FALSE
# Git checkout a branch of ONOS
@@ -18,10 +17,10 @@
# Does the git pull on the branch that was checked out
if not checkOutResult:
main.log.warn( "Failed to checked out " + gitBranch +
- " branch")
+ " branch" )
else:
main.log.info( "Successfully checked out " + gitBranch +
- " branch")
+ " branch" )
gitPullResult = main.ONOSbench.gitPull()
if gitPullResult == main.ERROR:
main.log.error( "Error pulling git branch" )
@@ -32,7 +31,3 @@
buildResult = main.ONOSbench.cleanInstall()
return buildResult
-
-
-
-
diff --git a/TestON/tests/FUNC/FUNCintentRest/dependencies/topo.py b/TestON/tests/FUNC/FUNCintentRest/dependencies/topo.py
index b44e3fc..7217d4d 100644
--- a/TestON/tests/FUNC/FUNCintentRest/dependencies/topo.py
+++ b/TestON/tests/FUNC/FUNCintentRest/dependencies/topo.py
@@ -1,11 +1,11 @@
"""
These functions can be used for topology comparisons
"""
-
import time
import os
import json
+
def getAllDevices( main ):
"""
Return a list containing the devices output from each ONOS node
@@ -13,9 +13,9 @@
devices = []
threads = []
for i in range( main.numCtrls ):
- t = main.Thread( target=main.CLIs[i].devices,
+ t = main.Thread( target=main.CLIs[ i ].devices,
name="devices-" + str( i ),
- args=[ ] )
+ args=[] )
threads.append( t )
t.start()
@@ -24,6 +24,7 @@
devices.append( t.result )
return devices
+
def getAllHosts( main ):
"""
Return a list containing the hosts output from each ONOS node
@@ -32,9 +33,9 @@
ipResult = main.TRUE
threads = []
for i in range( main.numCtrls ):
- t = main.Thread( target=main.CLIs[i].hosts,
+ t = main.Thread( target=main.CLIs[ i ].hosts,
name="hosts-" + str( i ),
- args=[ ] )
+ args=[] )
threads.append( t )
t.start()
@@ -43,6 +44,7 @@
hosts.append( t.result )
return hosts
+
def getAllPorts( main ):
"""
Return a list containing the ports output from each ONOS node
@@ -50,9 +52,9 @@
ports = []
threads = []
for i in range( main.numCtrls ):
- t = main.Thread( target=main.CLIs[i].ports,
+ t = main.Thread( target=main.CLIs[ i ].ports,
name="ports-" + str( i ),
- args=[ ] )
+ args=[] )
threads.append( t )
t.start()
@@ -61,6 +63,7 @@
ports.append( t.result )
return ports
+
def getAllLinks( main ):
"""
Return a list containing the links output from each ONOS node
@@ -68,9 +71,9 @@
links = []
threads = []
for i in range( main.numCtrls ):
- t = main.Thread( target=main.CLIs[i].links,
+ t = main.Thread( target=main.CLIs[ i ].links,
name="links-" + str( i ),
- args=[ ] )
+ args=[] )
threads.append( t )
t.start()
@@ -79,6 +82,7 @@
links.append( t.result )
return links
+
def getAllClusters( main ):
"""
Return a list containing the clusters output from each ONOS node
@@ -86,9 +90,9 @@
clusters = []
threads = []
for i in range( main.numCtrls ):
- t = main.Thread( target=main.CLIs[i].clusters,
+ t = main.Thread( target=main.CLIs[ i ].clusters,
name="clusters-" + str( i ),
- args=[ ] )
+ args=[] )
threads.append( t )
t.start()
@@ -96,5 +100,3 @@
t.join()
clusters.append( t.result )
return clusters
-
-