diff --git a/TestON/dependencies/topo-100sw.py b/TestON/dependencies/topo-100sw.py
new file mode 100644
index 0000000..308a3f1
--- /dev/null
+++ b/TestON/dependencies/topo-100sw.py
@@ -0,0 +1,31 @@
+
+from mininet.topo import Topo
+
+class MyTopo( Topo ):
+        "100 'floating' switch topology"
+
+        def __init__( self ):
+                # Initialize topology
+                Topo.__init__( self )
+
+                sw_list = []
+
+                for i in range(1, 101):
+                        sw_list.append(
+                                self.addSwitch(
+                                        's'+str(i),
+                                        dpid = str(i).zfill(16)))
+
+
+                #Below connections are used for test cases
+                #that need to test link and port events
+                #Add link between switch 1 and switch 2
+                self.addLink(sw_list[0],sw_list[1])
+                
+                #Create hosts and attach to sw 1 and sw 2
+                h1 = self.addHost('h1')
+                h2 = self.addHost('h2')
+                self.addLink(sw_list[0],h1)
+                self.addLink(sw_list[1],h2)
+        
+topos = { 'mytopo': ( lambda: MyTopo() ) }
diff --git a/TestON/dependencies/topo-intentFlower.py b/TestON/dependencies/topo-intentFlower.py
new file mode 100644
index 0000000..138c291
--- /dev/null
+++ b/TestON/dependencies/topo-intentFlower.py
@@ -0,0 +1,80 @@
+'''
+Topology with 3 core switches connected linearly.
+
+Each 'core' switch has a 'flower' of 10 switches
+for a total of 33 switches.
+
+Used in conjunction with 'IntentPerfNext' test
+'''
+
+from mininet.topo import Topo
+
+class MyTopo( Topo ):
+
+    def __init__( self ):
+        Topo.__init__( self )
+       
+        #Switches are listed out here for better view
+        #of the topology from this code
+        core_sw_list = ['s1','s2','s3']
+       
+        #Flower switches for core switch 1
+        flower_sw_list_s1 =\
+                ['s10', 's11', 's12', 's13', 's14',
+                 's15', 's16', 's17', 's18', 's19']
+        #Flower switches for core switch 2
+        flower_sw_list_s2 =\
+                ['s20', 's21', 's22', 's23', 's24',
+                 's25', 's26', 's27', 's28', 's29']
+        #Flower switches for core switch 3
+        flower_sw_list_s3 =\
+                ['s30', 's31', 's32', 's33', 's34',
+                 's35', 's36', 's37', 's38', 's39']
+
+        #Store switch objects in these variables
+        core_switches = []
+        flower_switches_1 = []
+        flower_switches_2 = []
+        flower_switches_3 = []
+       
+        #Add switches
+        for sw in core_sw_list:
+            core_switches.append(
+                    self.addSwitch(
+                        sw, 
+                        dpid = sw.replace('s','').zfill(16)
+                    )
+            )
+        for sw in flower_sw_list_s1:
+            flower_switches_1.append(
+                    self.addSwitch(
+                        sw,
+                        dpid = sw.replace('s','').zfill(16)
+                    )
+            )
+        for sw in flower_sw_list_s2:
+            flower_switches_2.append(
+                    self.addSwitch(
+                        sw,
+                        dpid = sw.replace('s','').zfill(16)
+                    )
+            )
+        for sw in flower_sw_list_s3:
+            flower_switches_3.append(
+                    self.addSwitch(
+                        sw,
+                        dpid = sw.replace('s','').zfill(16)
+                    )
+            )
+
+        self.addLink(core_switches[0], core_switches[1])
+        self.addLink(core_switches[1], core_switches[2])
+
+        for x in range(0, len(flower_sw_list_s1)):
+            self.addLink(core_switches[0], flower_switches_1[x]) 
+        for x in range(0, len(flower_sw_list_s2)):
+            self.addLink(core_switches[1], flower_switches_2[x])
+        for x in range(0, len(flower_sw_list_s3)):
+            self.addLink(core_switches[2], flower_switches_3[x])
+
+topos = { 'mytopo': ( lambda: MyTopo() ) }
diff --git a/TestON/drivers/common/cli/emulator/mininetclidriver.py b/TestON/drivers/common/cli/emulator/mininetclidriver.py
index 9875064..ad07d95 100644
--- a/TestON/drivers/common/cli/emulator/mininetclidriver.py
+++ b/TestON/drivers/common/cli/emulator/mininetclidriver.py
@@ -115,18 +115,18 @@
             if fanout is None:     #In tree topology, if fanout arg is not given, by default it is 2
                 fanout = 2
             k = 0
-            sum = 0
+            count = 0
             while(k <= depth-1): 
-                sum = sum + pow(fanout,k)
+                count = count + pow(fanout,k)
                 k = k+1
-                num_switches = sum
+                num_switches = count
             while(k <= depth-2): 
                 '''depth-2 gives you only core links and not considering edge links as seen by ONOS
                     If all the links including edge links are required, do depth-1
                 '''
-                sum = sum + pow(fanout,k)
+                count = count + pow(fanout,k)
                 k = k+1
-            num_links = sum * fanout
+            num_links = count * fanout
             #print "num_switches for %s(%d,%d) = %d and links=%d" %(topoType,depth,fanout,num_switches,num_links)
         
         elif topoType =='linear':
@@ -387,7 +387,7 @@
             return information dict about interfaces connected to the node
         '''
         if self.handle :
-            cmd = 'py "\\n".join(["name=%s,mac=%s,ip=%s,isUp=%s" % (i.name, i.MAC(), i.IP(), i.isUp())'
+            cmd = 'py "\\n".join(["name=%s,mac=%s,ip=%s,enabled=%s" % (i.name, i.MAC(), i.IP(), i.isUp())'
             cmd += ' for i in %s.intfs.values()])' % node
             try:
                 response = self.execute(cmd=cmd,prompt="mininet>",timeout=10)
@@ -490,11 +490,11 @@
         '''
         Bring link(s) between two nodes up or down
         '''
-        main.log.info('Bring link(s) between two nodes up or down')
         args = utilities.parse_args(["END1","END2","OPTION"],**linkargs)
         end1 = args["END1"] if args["END1"] != None else ""
         end2 = args["END2"] if args["END2"] != None else ""
         option = args["OPTION"] if args["OPTION"] != None else ""
+        main.log.info("Bring link between '"+ end1 +"' and '" + end2 + "' '" + option + "'")
         command = "link "+str(end1) + " " + str(end2)+ " " + str(option)
         try:
             #response = self.execute(cmd=command,prompt="mininet>",timeout=10)
@@ -716,7 +716,6 @@
             pattern = "flow_count=(\d+)"
             result = re.search(pattern, response, re.MULTILINE)
             if result is None:
-                print "no flow on switch print test"
                 main.log.info("Couldn't find flows on switch '', found: %s" % (switch, response))
                 return main.FALSE
             return result.group(1)
@@ -811,13 +810,10 @@
         #main.log.debug("Switches_json string: ", switches_json)
         output = {"switches":[]}
         for switch in topo.graph.switches: #iterate through the MN topology and pull out switches and and port info
-            #print vars(switch)
             ports = []
             for port in switch.ports.values():
-                #print port.hw_addr.toStr(separator = '')
                 ports.append({'of_port': port.port_no, 'mac': str(port.hw_addr).replace('\'',''), 'name': port.name})
             output['switches'].append({"name": switch.name, "dpid": str(switch.dpid).zfill(16), "ports": ports })
-        #print output
 
         #print "mn"
         #print json.dumps(output, sort_keys=True,indent=4,separators=(',', ': '))
@@ -830,6 +826,7 @@
         for switch in output['switches']:
             mnDPIDs.append(switch['dpid'])
         mnDPIDs.sort()
+        #print "List of Mininet switch DPID's"
         #print mnDPIDs
         if switches_json == "":#if rest call fails
             main.log.error(self.name + ".compare_switches(): Empty JSON object given from ONOS")
@@ -837,9 +834,13 @@
         onos=switches_json
         onosDPIDs=[]
         for switch in onos:
-            onosDPIDs.append(switch['id'].replace(":",'').replace("of",''))
-            #print switch
+            if switch['available'] == True:
+                onosDPIDs.append(switch['id'].replace(":",'').replace("of",''))
+            #else:
+                #print "Switch is unavailable:"
+                #print switch
         onosDPIDs.sort()
+        #print "List of ONOS switch DPID's"
         #print onosDPIDs
 
         if mnDPIDs!=onosDPIDs:
@@ -872,51 +873,68 @@
         port_results = main.TRUE
         output = {"switches":[]}
         for switch in topo.graph.switches: #iterate through the MN topology and pull out switches and and port info
-            #print vars(switch)
             ports = []
             for port in switch.ports.values():
                 #print port.hw_addr.toStr(separator = '')
-                ports.append({'of_port': port.port_no, 'mac': str(port.hw_addr).replace('\'',''), 'name': port.name})
-            output['switches'].append({"name": switch.name, "dpid": str(switch.dpid).zfill(16), "ports": ports })
-        #print "compare_ports 'output' variable:"
-        #print output
+                tmp_port = {}
+                tmp_port['of_port'] = port.port_no
+                tmp_port['mac'] = str(port.hw_addr).replace('\'','')
+                tmp_port['name'] = port.name
+                tmp_port['enabled'] = port.enabled
+
+                ports.append(tmp_port)
+            tmp_switch = {}
+            tmp_switch['name'] = switch.name
+            tmp_switch['dpid'] = str(switch.dpid).zfill(16)
+            tmp_switch['ports'] = ports
+
+            output['switches'].append(tmp_switch)
 
 
         ################ports#############
-        for switch in output['switches']:
+        for mn_switch in output['switches']:
             mn_ports = []
             onos_ports = []
-            for port in switch['ports']:
-                mn_ports.append(port['of_port'])
+            for port in mn_switch['ports']:
+                if port['enabled'] == True:
+                    mn_ports.append(port['of_port'])
             for onos_switch in ports_json:
-                if onos_switch['device'].replace(':','').replace("of", '') == switch['dpid']:
-                    for port in onos_switch['ports']:
-                        onos_ports.append(int(port['port'])) 
+                #print "Iterating through a new switch as seen by ONOS"
+                #print onos_switch
+                if onos_switch['device']['available'] == True:
+                    if onos_switch['device']['id'].replace(':','').replace("of", '') == mn_switch['dpid']:
+                        for port in onos_switch['ports']:
+                            if port['isEnabled']:
+                                #print "Iterating through available ports on the switch"
+                                #print port
+                                onos_ports.append(int(port['port'])) 
             mn_ports.sort(key=float)
             onos_ports.sort(key=float)
             #print "\nPorts for Switch %s:" % (switch['name'])
             #print "\tmn_ports[] = ", mn_ports
             #print "\tonos_ports[] = ", onos_ports
             
-            #if mn_ports == onos_ports:
-                #pass #don't set results to true here as this is just one of many checks and it might override a failure
-
-            #For OF1.3, the OFP_local port number is 0xfffffffe or 4294967294 instead of 0xfffe or 65534 in OF1.0, ONOS topology
-            #sees the correct port number, however MN topology as read from line 151 of https://github.com/ucb-sts/sts/blob/
-            #topology_refactoring2/sts/entities/teston_entities.py is 0xfffe which doesn't work correctly with OF1.3 switches.
-            #So a short term fix is to ignore the case when mn_port == 65534 and onos_port ==4294967294.
+            #NOTE:For OF1.3, the OFP_local port number is 0xfffffffe or 4294967294 instead of 0xfffe or 65534 in OF1.0,
+            #   ONOS topology sees the correct port number, however MN topology as read from line 151 of
+            #   https://github.com/ucb-sts/sts/blob/topology_refactoring2/sts/entities/teston_entities.py 
+            #   is 0xfffe which doesn't work correctly with OF1.3 switches.
             
-            #ONOS-Next is abstracting port numbers to 64bit unsigned number. So we will be converting the OF reserved ports to these numbers
+            #NOTE: ONOS is abstracting port numbers to 64bit unsigned number(long). So we will be converting the 
+            #   OF reserved ports to these numbers
+
+
             #TODO: handle other reserved port numbers besides LOCAL
             for mn_port,onos_port in zip(mn_ports,onos_ports):
-                if mn_port == onos_port or (mn_port == 65534 and onos_port ==int(uint64(-2))):
+                #print "mn == onos port?"
+                #print mn_port, onos_port
+                if mn_port == onos_port or (mn_port == 65534 and onos_port == long(uint64(-2))):
                     continue
                     #don't set results to true here as this is just one of many checks and it might override a failure
                 else:  #the ports of this switch don't match
                     port_results = main.FALSE
                     break
             if port_results == main.FALSE:
-                main.log.report("The list of ports for switch %s(%s) does not match:" % (switch['name'], switch['dpid']) )
+                main.log.report("The list of ports for switch %s(%s) does not match:" % (mn_switch['name'], mn_switch['dpid']) )
                 main.log.report("mn_ports[] = " +  str(mn_ports))
                 main.log.report("onos_ports[] = " + str(onos_ports))
         return port_results
@@ -939,7 +957,8 @@
         output = {"switches":[]}
         onos = links_json
         for switch in topo.graph.switches: #iterate through the MN topology and pull out switches and and port info
-            #print vars(switch)
+            # print "Iterating though switches as seen by Mininet"
+            # print switch
             ports = []
             for port in switch.ports.values():
                 #print port.hw_addr.toStr(separator = '')
@@ -947,19 +966,21 @@
             output['switches'].append({"name": switch.name, "dpid": str(switch.dpid).zfill(16), "ports": ports })
         #######Links########
 
-        if 2*len(topo.patch_panel.network_links) == len(onos):
+        mn_links = [link for link in topo.patch_panel.network_links if (link.port1.enabled and link.port2.enabled)]
+        #print "mn_links:"
+        #print mn_links
+        if 2*len(mn_links) == len(onos):
             link_results = main.TRUE
         else:
             link_results = main.FALSE
-            main.log.report("Mininet has %i bidirectional links and ONOS has %i unidirectional links" % (len(topo.patch_panel.network_links), len(onos) ))
+            main.log.report("Mininet has %i bidirectional links and ONOS has %i unidirectional links" % (len(mn_links), len(onos) ))
 
 
         # iterate through MN links and check if an ONOS link exists in both directions
         # NOTE: Will currently only show mn links as down if they are cut through STS. 
         #       We can either do everything through STS or wait for up_network_links 
         #       and down_network_links to be fully implemented.
-        for link in topo.patch_panel.network_links: 
-            #print "\n"
+        for link in mn_links: 
             #print "Link: %s" % link
             #TODO: Find a more efficient search method
             node1 = None
@@ -1050,6 +1071,26 @@
 
         return host_list 
 
+
+    def update(self):
+        '''
+        updates the port address and status information for each port in mn
+        '''
+        #TODO: Add error checking. currently the mininet command has no output
+        main.log.info("Updateing MN port information")
+        self.handle.sendline("")
+        self.handle.expect("mininet>")
+        
+        self.handle.sendline("update")
+        self.handle.expect("mininet>")
+
+        self.handle.sendline("")
+        self.handle.expect("mininet>")
+
+        return main.TRUE 
+
+        
+
 if __name__ != "__main__":
     import sys
     sys.modules[__name__] = MininetCliDriver()
diff --git a/TestON/drivers/common/cli/emulator/remotemininetdriver.py b/TestON/drivers/common/cli/emulator/remotemininetdriver.py
index 2acddb4..ffb5151 100644
--- a/TestON/drivers/common/cli/emulator/remotemininetdriver.py
+++ b/TestON/drivers/common/cli/emulator/remotemininetdriver.py
@@ -416,6 +416,15 @@
             main.cleanup()
             main.exit()
 
+    def run_optical_mn_script(self):
+        self.handle.sendline("")
+        self.handle.expect("\$")
+        self.handle.sendline("cd ~")
+        self.handle.expect("\$")
+        self.handle.sendline("sudo python optical.py")
+        self.handle.expect("\$")
+
+
     def del_switch(self,sw):
         self.handle.sendline("")
         self.handle.expect("\$")
diff --git a/TestON/drivers/common/cli/onosclidriver.py b/TestON/drivers/common/cli/onosclidriver.py
index 2404a0d..90514d0 100644
--- a/TestON/drivers/common/cli/onosclidriver.py
+++ b/TestON/drivers/common/cli/onosclidriver.py
@@ -950,7 +950,7 @@
 
     def add_point_intent(self, ingress_device, port_ingress,
             egress_device, port_egress, ethType="", ethSrc="",
-            ethDst=""):
+            ethDst="", bandwidth="", lambda_alloc=False):
         '''
         Required:
             * ingress_device: device id of ingress device
@@ -959,6 +959,9 @@
             * ethType: specify ethType
             * ethSrc: specify ethSrc (i.e. src mac addr)
             * ethDst: specify ethDst (i.e. dst mac addr)
+            * bandwidth: specify bandwidth capacity of link
+            * lambda_alloc: if True, intent will allocate lambda 
+              for the specified intent
         Description:
             Adds a point-to-point intent (uni-directional) by
             specifying device id's and optional fields
@@ -971,7 +974,8 @@
             cmd = ""
 
             #If there are no optional arguments
-            if not ethType and not ethSrc and not ethDst:
+            if not ethType and not ethSrc and not ethDst\
+                    and not bandwidth and not lambda_alloc:
                 cmd = "add-point-intent "+\
                         str(ingress_device) + "/" + str(port_ingress) + " " +\
                         str(egress_device) + "/" + str(port_egress)
@@ -985,13 +989,14 @@
                     cmd += " --ethSrc " + str(ethSrc) 
                 if ethDst:    
                     cmd += " --ethDst " + str(ethDst) 
-                        
-                cmd += " "+str(ingress_device) + "/" + str(port_ingress) + " " +\
-                str(egress_device) + "/" + str(port_egress) 
+                if bandwidth:
+                    cmd += " --bandwidth " + str(bandwidth)
+                if lambda_alloc:
+                    cmd += " --lambda " 
 
-            #print "cmd = ", cmd
-            #self.handle.sendline("")
-            #self.handle.expect("onos>")
+                cmd += " "+str(ingress_device) +\
+                    "/" + str(port_ingress) + " " +\
+                    str(egress_device) + "/" + str(port_egress) 
 
             self.handle.sendline(cmd)
             i = self.handle.expect([
@@ -1001,12 +1006,6 @@
             self.handle.sendline("intents")
             self.handle.expect("onos>")
             Intenthandle = self.handle.before
-            #print "Intenthandle = ", Intenthandle
-
-            #self.handle.sendline("flows")
-            #self.handle.expect("onos>")
-            #Flowhandle = self.handle.before
-            #print "Flowhandle = ", Flowhandle
 
             if i == 0:
                 main.log.error("Error in adding point-to-point intent")
@@ -1072,7 +1071,9 @@
                 self.handle.expect("intents -j")
                 self.handle.expect("onos>")
                 handle = self.handle.before
-
+                
+                ansi_escape = re.compile(r'\r\r\n\x1b[^m]*m')
+                handle = ansi_escape.sub('', handle)
             else:
                 self.handle.sendline("")
                 self.handle.expect("onos>")
@@ -1130,7 +1131,44 @@
             main.cleanup()
             main.exit()
 
+    def intents_events_metrics(self, json_format=True):
+        '''
+        Description:Returns topology metrics 
+        Optional:
+            * json_format: enable json formatting of output
+        '''
+        try:
+            if json_format:
+                self.handle.sendline("intents-events-metrics -j")
+                self.handle.expect("intents-events-metrics -j")
+                self.handle.expect("onos>")
+                
+                handle = self.handle.before
+              
+                #Some color thing that we want to escape
+                ansi_escape = re.compile(r'\r\r\n\x1b[^m]*m')
+                handle = ansi_escape.sub('', handle)
+            
+            else:
+                self.handle.sendline("intents-events-metrics")
+                self.handle.expect("intents-events-metrics")
+                self.handle.expect("onos>")
+                
+                handle = self.handle.before
 
+            return handle
+        
+        except pexpect.EOF:
+            main.log.error(self.name + ": EOF exception found")
+            main.log.error(self.name + ":    " + self.handle.before)
+            main.cleanup()
+            main.exit()
+        except:
+            main.log.info(self.name+" ::::::")
+            main.log.error( traceback.print_exc())
+            main.log.info(self.name+" ::::::")
+            main.cleanup()
+            main.exit()
 
     def topology_events_metrics(self, json_format=True):
         '''
diff --git a/TestON/drivers/common/cli/onosdriver.py b/TestON/drivers/common/cli/onosdriver.py
index 9238f8a..875707b 100644
--- a/TestON/drivers/common/cli/onosdriver.py
+++ b/TestON/drivers/common/cli/onosdriver.py
@@ -120,6 +120,36 @@
             main.cleanup()
             main.exit()
 
+    def onos_build(self):
+        '''
+        Use the pre defined script to build onos via mvn
+        '''
+        
+        try:
+            self.handle.sendline("onos-build")
+            self.handle.expect("onos-build")
+            i = self.handle.expect([
+                "BUILD SUCCESS",
+                "ERROR",
+                "BUILD FAILED"], timeout=120)
+            handle = str(self.handle.before)
+
+            main.log.info("onos-build command returned: "+
+                    handle)
+
+            if i == 0:
+                return main.TRUE
+            else:
+                return handle
+
+        except pexpect.EOF:
+            main.log.error(self.name + ": EOF exception found")
+            main.log.error(self.name + ":    " + self.handle.before)
+        except:
+            main.log.error("Failed to build ONOS")
+            main.cleanup()
+            main.exit()
+
     def clean_install(self):
         '''
         Runs mvn clean install in the root of the ONOS directory. 
@@ -354,7 +384,7 @@
             main.cleanup()
             main.exit()
 
-    def get_version(self):
+    def get_version(self, report=False):
         '''
         Writes the COMMIT number to the report to be parsed by Jenkins data collecter.
         '''
@@ -373,6 +403,9 @@
             lines=response.splitlines()
             for line in lines:
                 print line
+            if report:
+                for line in lines[2:-1]:
+                    main.log.report(line)
             return lines[2]
         except pexpect.EOF:
             main.log.error(self.name + ": EOF exception found")
@@ -850,7 +883,7 @@
             self.handle.sendline("onos-wait-for-start " + node )
             self.handle.expect("onos-wait-for-start")
             #NOTE: this timeout is arbitrary"
-            i = self.handle.expect(["\$", pexpect.TIMEOUT], timeout = 120)
+            i = self.handle.expect(["\$", pexpect.TIMEOUT], timeout = 300)
             if i == 0:
                 main.log.info(self.name + ": " + node + " is up")
                 return main.TRUE
@@ -986,6 +1019,41 @@
             main.cleanup()
             main.exit()
 
+    def tshark_pcap(self, interface, dir_file):
+        '''
+        Capture all packet activity and store in specified
+        directory/file
+
+        Required:
+            * interface: interface to capture
+            * dir: directory/filename to store pcap
+        '''
+        self.handle.sendline("")
+        self.handle.expect("\$")
+
+        self.handle.sendline("tshark -i "+str(interface)+
+                " -t e -w "+str(dir_file))
+        self.handle.expect("Capturing on")
+
+        main.log.info("Tshark started capturing files on "+
+                str(interface)+ " and saving to directory: "+
+                str(dir_File))
+
+
+    def run_onos_topo_cfg(self):
+        '''
+         On ONOS bench, run this command: ./~/ONOS/tools/test/bin/onos-topo-cfg
+            which starts the rest and copies the json file to the onos instance
+        '''
+        self.handle.sendline("")
+        self.handle.expect("\$")
+        self.handle.sendline("cd ~/ONOS/tools/test/bin")
+        self.handle.expect("/bin$")
+        self.handle.sendline("./onos-topo-cfg")
+        self.handle.expect("{}admin@onosTestBench")
+        self.handle.sendline("cd ~")
+        self.handle.expect("\$")
+
 
     def tshark_grep(self, grep, directory, interface='eth0'):
         '''
diff --git a/TestON/tests/IntentPerfNext/IntentPerfNext.params b/TestON/tests/IntentPerfNext/IntentPerfNext.params
new file mode 100644
index 0000000..7e1de77
--- /dev/null
+++ b/TestON/tests/IntentPerfNext/IntentPerfNext.params
@@ -0,0 +1,44 @@
+<PARAMS>
+    <testcases>1,2</testcases>
+
+    <ENV>
+        <cellName>intent_perf_test</cellName>
+    </ENV>
+
+    <GIT>
+        #autoPull 'on' or 'off'
+        <autoPull>off</autoPull>
+        <checkout>master</checkout>
+    </GIT>
+
+    <CTRL>
+        <user>admin</user>
+        <ip1>10.128.174.1</ip1>
+        <port1>6633</port1>
+        <ip2>10.128.174.2</ip2>
+        <port2>6633</port2>
+        <ip3>10.128.174.3</ip3>
+        <port3>6633</port3>
+    </CTRL>
+
+    <MN>
+        <ip1>10.128.10.90</ip1>
+        <ip2>10.128.10.91</ip2>
+    </MN>
+
+    <BENCH>
+        <ip>10.128.174.10</ip>
+    </BENCH>
+
+    <TEST>
+        #Number of times to iterate each case
+        <numIter>5</numIter>
+    </TEST>
+
+    <JSON>
+        <submittedTime>intentSubmittedTimestamp</submittedTime>
+        <installedTime>intentInstalledTimestamp</installedTime>
+        <wdRequestTime>intentWithdrawRequestedTimestamp</wdRequestTime>
+        <withdrawnTime>intentWithdrawnTimestamp</withdrawnTime>
+    </JSON>
+</PARAMS>
diff --git a/TestON/tests/IntentPerfNext/IntentPerfNext.py b/TestON/tests/IntentPerfNext/IntentPerfNext.py
new file mode 100644
index 0000000..2fb22dc
--- /dev/null
+++ b/TestON/tests/IntentPerfNext/IntentPerfNext.py
@@ -0,0 +1,218 @@
+#Intent Performance Test for ONOS-next
+#
+#andrew@onlab.us
+#
+#November 5, 2014
+
+class IntentPerfNext:
+    def __init__(self):
+        self.default = ""
+
+    def CASE1(self, main):
+        '''
+        ONOS startup sequence
+        '''
+
+        import time
+
+        cell_name = main.params['ENV']['cellName']
+
+        git_pull = main.params['GIT']['autoPull']
+        checkout_branch = main.params['GIT']['checkout']
+
+        ONOS1_ip = main.params['CTRL']['ip1']
+        ONOS2_ip = main.params['CTRL']['ip2']
+        ONOS3_ip = main.params['CTRL']['ip3']
+        
+        MN1_ip = main.params['MN']['ip1']
+        BENCH_ip = main.params['BENCH']['ip']
+    
+        main.case("Setting up test environment")
+
+        main.step("Creating cell file")
+        cell_file_result = main.ONOSbench.create_cell_file(
+                BENCH_ip, cell_name, MN1_ip, "onos-core",
+                ONOS1_ip, ONOS2_ip, ONOS3_ip)
+
+        main.step("Applying cell file to environment")
+        cell_apply_result = main.ONOSbench.set_cell(cell_name)
+        verify_cell_result = main.ONOSbench.verify_cell()
+
+        main.step("Git checkout and pull "+checkout_branch)
+        if git_pull == 'on':
+            checkout_result = \
+                main.ONOSbench.git_checkout(checkout_branch)
+            pull_result = main.ONOSbench.git_pull()
+           
+            #If you used git pull, auto compile
+            main.step("Using onos-build to compile ONOS")
+            build_result = main.ONOSbench.onos_build()
+        else:
+            checkout_result = main.TRUE
+            pull_result = main.TRUE
+            build_result = main.TRUE
+            main.log.info("Git pull skipped by configuration")
+
+        main.step("Creating ONOS package")
+        package_result = main.ONOSbench.onos_package()
+
+        main.step("Installing ONOS package")
+        install1_result = main.ONOSbench.onos_install(node=ONOS1_ip)
+        install2_result = main.ONOSbench.onos_install(node=ONOS2_ip)
+        install3_result = main.ONOSbench.onos_install(node=ONOS3_ip)
+
+        main.step("Set cell for ONOScli env")
+        main.ONOS1cli.set_cell(cell_name)
+        main.ONOS2cli.set_cell(cell_name)
+        main.ONOS3cli.set_cell(cell_name)
+
+        time.sleep(5)
+
+        main.step("Start onos cli")
+        cli1 = main.ONOS1cli.start_onos_cli(ONOS1_ip)
+        cli2 = main.ONOS2cli.start_onos_cli(ONOS2_ip)
+        cli3 = main.ONOS3cli.start_onos_cli(ONOS3_ip)
+
+        main.step("Enable metrics feature")
+        main.ONOS1cli.feature_install("onos-app-metrics")
+        main.ONOS2cli.feature_install("onos-app-metrics")
+        main.ONOS3cli.feature_install("onos-app-metrics")
+
+        utilities.assert_equals(expect=main.TRUE,
+                actual = cell_file_result and cell_apply_result and\
+                         verify_cell_result and checkout_result and\
+                         pull_result and build_result and\
+                         install1_result and install2_result and\
+                         install3_result,
+                onpass="ONOS started successfully",
+                onfail="Failed to start ONOS")
+
+    def CASE2(self, main):
+        '''
+        Single intent add latency
+
+        '''
+        import time
+        import json
+        import requests
+        import os
+
+        ONOS1_ip = main.params['CTRL']['ip1']
+        ONOS2_ip = main.params['CTRL']['ip2']
+        ONOS3_ip = main.params['CTRL']['ip3']
+        ONOS_user = main.params['CTRL']['user']
+
+        default_sw_port = main.params['CTRL']['port1']
+
+        #number of iterations of case
+        num_iter = main.params['TEST']['numIter']
+
+        #Timestamp keys for json metrics output
+        submit_time = main.params['JSON']['submittedTime']
+        install_time = main.params['JSON']['installedTime']
+        wdRequest_time = main.params['JSON']['wdRequestTime']
+        withdrawn_time = main.params['JSON']['withdrawnTime']
+
+        devices_json_str = main.ONOS1cli.devices()
+        devices_json_obj = json.loads(devices_json_str)
+
+        device_id_list = []
+
+        #Obtain device id list in ONOS format.
+        #They should already be in order (1,2,3,10,11,12,13, etc)
+        for device in devices_json_obj:
+            device_id_list.append(device['id'])
+
+        intent_add_lat_list = []
+
+        for i in range(0, int(num_iter)):
+            #add_point_intent(ingr_device, ingr_port, 
+            #                 egr_device, egr_port)
+            main.ONOS1cli.add_point_intent(
+                device_id_list[0], 2,
+                device_id_list[2], 1)
+        
+            #Allow some time for intents to propagate
+            time.sleep(5)
+
+            #Obtain metrics from ONOS 1, 2, 3
+            intents_json_str_1 = main.ONOS1cli.intents_events_metrics()
+            intents_json_str_2 = main.ONOS2cli.intents_events_metrics()
+            intents_json_str_3 = main.ONOS3cli.intents_events_metrics()
+
+            intents_json_obj_1 = json.loads(intents_json_str_1)
+            intents_json_obj_2 = json.loads(intents_json_str_2)
+            intents_json_obj_3 = json.loads(intents_json_str_3)
+
+            #Parse values from the json object
+            intent_submit_1 = \
+                    intents_json_obj_1[submit_time]['value']
+            intent_submit_2 = \
+                    intents_json_obj_2[submit_time]['value']
+            intent_submit_3 = \
+                    intents_json_obj_3[submit_time]['value']
+
+            intent_install_1 = \
+                    intents_json_obj_1[install_time]['value']
+            intent_install_2 = \
+                    intents_json_obj_2[install_time]['value']
+            intent_install_3 = \
+                    intents_json_obj_3[install_time]['value']
+
+            intent_install_lat_1 = \
+                    int(intent_install_1) - int(intent_submit_1)
+            intent_install_lat_2 = \
+                    int(intent_install_2) - int(intent_submit_2)
+            intent_install_lat_3 = \
+                    int(intent_install_3) - int(intent_submit_3)
+            
+            intent_install_lat_avg = \
+                    (intent_install_lat_1 + 
+                     intent_install_lat_2 +
+                     intent_install_lat_3 ) / 3
+
+            main.log.info("Intent add latency avg for iteration "+str(i)+
+                    ": "+str(intent_install_lat_avg))
+
+            if intent_install_lat_avg > 0.0 and \
+               intent_install_lat_avg < 1000:
+                intent_add_lat_list.append(intent_install_lat_avg)
+            else:
+                main.log.info("Intent add latency exceeded "+
+                        "threshold. Skipping iteration "+str(i))
+
+            time.sleep(3)
+            
+            #TODO: Possibly put this in the driver function
+            main.log.info("Removing intents for next iteration")
+            json_temp = \
+                    main.ONOS1cli.intents(json_format=True)
+            json_obj_intents = json.loads(json_temp)
+            if json_obj_intents:
+                for intents in json_obj_intents:
+                    temp_id = intents['id']
+                    main.ONOS1cli.remove_intent(temp_id)
+                    main.log.info("Removing intent id: "+
+                        str(temp_id))
+                    main.ONOS1cli.remove_intent(temp_id)
+            else:
+                main.log.info("Intents were not installed correctly")
+
+            time.sleep(5)
+
+        intent_add_lat_min = min(intent_add_lat_list)
+        intent_add_lat_max = max(intent_add_lat_list)
+        intent_add_lat_avg = sum(intent_add_lat_list) /\
+                             len(intent_add_lat_list)
+        #END ITERATION FOR LOOP
+        main.log.report("Single intent add latency - \n"+
+                "Min: "+str(intent_add_lat_min)+" ms\n"+
+                "Max: "+str(intent_add_lat_max)+" ms\n"+
+                "Avg: "+str(intent_add_lat_avg)+" ms\n")
+
+
+    def CASE3(self, main):
+        '''
+        CASE3 coming soon
+        '''
+
diff --git a/TestON/tests/IntentPerfNext/IntentPerfNext.topo b/TestON/tests/IntentPerfNext/IntentPerfNext.topo
new file mode 100644
index 0000000..fbde0e1
--- /dev/null
+++ b/TestON/tests/IntentPerfNext/IntentPerfNext.topo
@@ -0,0 +1,73 @@
+<TOPOLOGY>
+    <COMPONENT>
+        
+        <ONOSbench>
+            <host>10.128.174.10</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosDriver</type>
+            <connect_order>1</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </ONOSbench>
+
+        <ONOS1cli>
+            <host>10.128.174.10</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosCliDriver</type>
+            <connect_order>2</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </ONOS1cli>
+
+        <ONOS2cli>
+            <host>10.128.174.10</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosCliDriver</type>
+            <connect_order>2</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </ONOS2cli>
+        
+        <ONOS3cli>
+            <host>10.128.174.10</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosCliDriver</type>
+            <connect_order>2</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </ONOS3cli>
+
+        <ONOS1>
+            <host>10.128.174.1</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosDriver</type>
+            <connect_order>3</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </ONOS1>
+
+        <Mininet1>
+            <host>10.128.10.90</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>MininetCliDriver</type>
+            <connect_order>4</connect_order>
+            <COMPONENTS>
+                <arg1> --custom topo-intentFlower.py </arg1>
+                <arg2> --arp --mac --topo mytopo</arg2>
+                <arg3> </arg3>
+                <controller> remote,ip=10.128.174.1 </controller>
+            </COMPONENTS>
+        </Mininet1>
+
+        <Mininet2>
+            <host>10.128.10.90</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>RemoteMininetDriver</type>
+            <connect_order>5</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </Mininet2>
+
+    </COMPONENT>
+</TOPOLOGY>
diff --git a/TestON/tests/MininetSlicing/MininetSlicing.py b/TestON/tests/MininetSlicing/MininetSlicing.py
index ac723fb..86b3ddc 100644
--- a/TestON/tests/MininetSlicing/MininetSlicing.py
+++ b/TestON/tests/MininetSlicing/MininetSlicing.py
@@ -1,17 +1,4 @@
-'''
-	
- *   TestON is free software: you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation, either version 2 of the License, or
- *   (at your option) any later version.
 
- *   TestON is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
-
-
-'''
 class MininetSlicing :
 
     def __init__(self) :
@@ -81,5 +68,4 @@
     
     
     
-    
-    
+    
\ No newline at end of file
diff --git a/TestON/tests/ONOSNextTest/ONOSNextTest.params b/TestON/tests/ONOSNextTest/ONOSNextTest.params
index 019b746..d600eae 100755
--- a/TestON/tests/ONOSNextTest/ONOSNextTest.params
+++ b/TestON/tests/ONOSNextTest/ONOSNextTest.params
@@ -8,7 +8,7 @@
     </ENV>
 
     <CTRL>
-        <ip1>10.128.20.11</ip1>
+        <ip1>10.128.174.1</ip1>
         <port1>6633</port1>
     </CTRL>
 
diff --git a/TestON/tests/ONOSNextTest/ONOSNextTest.py b/TestON/tests/ONOSNextTest/ONOSNextTest.py
index de441ba..3496771 100755
--- a/TestON/tests/ONOSNextTest/ONOSNextTest.py
+++ b/TestON/tests/ONOSNextTest/ONOSNextTest.py
@@ -30,7 +30,7 @@
         ONOS1_port = main.params['CTRL']['port1']
         
         git_pull_trigger = main.params['GIT']['autoPull']
-        git_checkout_branch = main.params['GIT']['branch']
+        git_checkout_branch = main.params['GIT']['checkout']
 
         main.case("Setting up test environment")
         
@@ -39,7 +39,7 @@
         cell_file_result = main.ONOSbench.create_cell_file(
                 "10.128.20.10", "temp_cell_2", "10.128.10.90",
                 "onos-core-trivial,onos-app-fwd",
-                "10.128.20.11")
+                "10.128.174.1")
 
         main.step("Applying cell variable to environment")
         #cell_result = main.ONOSbench.set_cell(cell_name)
@@ -180,7 +180,8 @@
         main.case("Testing the ONOS-cli")
         
         main.step("Set cell for ONOS-cli environment")
-        main.ONOScli.set_cell(cell_name)
+        #main.ONOScli.set_cell(cell_name)
+        main.ONOScli.set_cell("temp_cell_2")
 
         main.step("Start ONOS-cli")
         main.ONOScli.start_onos_cli(ONOS1_ip)
@@ -198,12 +199,12 @@
             main.log.info("Node successfully added")
 
         main.step("Add a correct node")
-        node_result = main.ONOScli.add_node("111", "10.128.20.12")
+        node_result = main.ONOScli.add_node("111", "10.128.174.2")
 
         main.step("Assign switches and list devices")
         for i in range(1,8):
             main.Mininet2.handle.sendline("sh ovs-vsctl set-controller s"+str(i)+
-                    " tcp:10.128.20.11")
+                    " tcp:10.128.174.1")
             main.Mininet2.handle.expect("mininet>")
         #Need to sleep to allow switch add processing
         time.sleep(5)
@@ -315,6 +316,19 @@
             main.log.info(get_intent_result)
         #*******************************************
 
+        main.step("Print intents in json format")
+        intents = main.ONOScli.intents(json_format = True)
+        main.log.info(intents)
+
+        main.step("Add eth options in point-to-point intent")
+        ptp_eth = main.ONOScli.add_point_intent(
+                devices_id_list[2], 1, devices_id_list[3], 2,
+                ethSrc = "00:02", ethDst = "00:03")
+        main.log.info(ptp_eth)
+
+        main.step("Print intents with eth options")
+        intents = main.ONOScli.intents()
+        main.log.info(intents)
 ######
 #jhall@onlab.us
 #andrew@onlab.us
diff --git a/TestON/tests/ONOSNextTest/ONOSNextTest.topo b/TestON/tests/ONOSNextTest/ONOSNextTest.topo
index 118e57c..0c84cc7 100755
--- a/TestON/tests/ONOSNextTest/ONOSNextTest.topo
+++ b/TestON/tests/ONOSNextTest/ONOSNextTest.topo
@@ -20,7 +20,7 @@
         </ONOScli>
 
         <ONOS1>
-            <host>10.128.20.11</host>
+            <host>10.128.174.1</host>
             <user>sdn</user>
             <password>rocks</password>
             <type>OnosDriver</type>
diff --git a/TestON/tests/TopoPerfNext/TopoPerfNext.params b/TestON/tests/TopoPerfNext/TopoPerfNext.params
index 39ddc7b..01334c9 100644
--- a/TestON/tests/TopoPerfNext/TopoPerfNext.params
+++ b/TestON/tests/TopoPerfNext/TopoPerfNext.params
@@ -1,5 +1,5 @@
 <PARAMS>
-    <testcases>1,4</testcases>
+    <testcases>1,2,3,4,5</testcases>
 
     <ENV>
         <cellName>topo_perf_test</cellName>
@@ -31,9 +31,22 @@
     </BENCH>
 
     <TEST>
+        #'on' or 'off' debug mode.
+        #If on, logging will be more verbose and
+        #tshark pcap will be enabled
+        #pcap file located at /tmp/'capture_name'
+        <debugMode>on</debugMode>
+
         #Number of times to iterate each case
-        <numIter>2</numIter>
+        <numIter>5</numIter>
         <numSwitch>100</numSwitch>         
+    
+        <singleSwThreshold>0,1000</singleSwThreshold>
+        <portUpThreshold>0,1000</portUpThreshold>
+        <portDownThreshold>0,1000</portDownThreshold>
+        <linkUpThreshold>0,10000</linkUpThreshold>
+        <linkDownThreshold>0,10000</linkDownThreshold>
+        <swDisc100Threshold>0,10000</swDisc100Threshold>
     </TEST>
 
     <JSON>
diff --git a/TestON/tests/TopoPerfNext/TopoPerfNext.py b/TestON/tests/TopoPerfNext/TopoPerfNext.py
index adc3b96..9dd828e 100644
--- a/TestON/tests/TopoPerfNext/TopoPerfNext.py
+++ b/TestON/tests/TopoPerfNext/TopoPerfNext.py
@@ -131,6 +131,14 @@
         deviceTimestamp = main.params['JSON']['deviceTimestamp']
         graphTimestamp = main.params['JSON']['graphTimestamp']
 
+        debug_mode = main.params['TEST']['debugMode']
+
+        #Threshold for the test
+        threshold_str = main.params['TEST']['singleSwThreshold']
+        threshold_obj = threshold_str.split(",")
+        threshold_min = int(threshold_obj[0])
+        threshold_max = int(threshold_obj[1])
+
         #List of switch add latency collected from
         #all iterations
         latency_end_to_end_list = []
@@ -148,7 +156,12 @@
      
         #Initialize assertion to TRUE
         assertion = main.TRUE
-        
+      
+        local_time = time.strftime('%x %X')
+        if debug_mode == 'on':
+            main.ONOS1.tshark_pcap("eth0",
+                    "/tmp/single_sw_lat_pcap"+local_time) 
+
         main.log.report("Latency of adding one switch")
 
         for i in range(0, int(num_iter)):
@@ -308,7 +321,8 @@
                      int(delta_ofp_graph_2)+\
                      int(delta_ofp_graph_3)) / 3
             
-            if avg_delta_ofp_graph > 0.0 and avg_delta_ofp_graph < 10000:
+            if avg_delta_ofp_graph > threshold_min \
+                    and avg_delta_ofp_graph < threshold_max:
                 latency_ofp_to_graph_list.append(avg_delta_ofp_graph)
             else:
                 main.log.info("Results for ofp-to-graph "+\
@@ -326,14 +340,11 @@
             
             #NOTE: ofp - delta measurements are occasionally negative
             #      due to system time misalignment.
-            #TODO: Implement ptp across all clusters
-            #Just add the calculation to list for now
             latency_ofp_to_device_list.append(avg_delta_ofp_device)
 
             #TODO:
             #Fetch logs upon threshold excess
 
-            
             main.log.info("ONOS1 delta end-to-end: "+
                     str(delta_graph_1) + " ms")
             main.log.info("ONOS2 delta end-to-end: "+
@@ -355,12 +366,12 @@
             main.log.info("ONOS3 delta device - t0: "+
                     str(delta_device_3) + " ms")
           
-            main.log.info("ONOS1 delta OFP - device: "+
-                    str(delta_ofp_device_1) + " ms")
-            main.log.info("ONOS2 delta OFP - device: "+
-                    str(delta_ofp_device_2) + " ms")
-            main.log.info("ONOS3 delta OFP - device: "+
-                    str(delta_ofp_device_3) + " ms")
+            #main.log.info("ONOS1 delta OFP - device: "+
+            #        str(delta_ofp_device_1) + " ms")
+            #main.log.info("ONOS2 delta OFP - device: "+
+            #        str(delta_ofp_device_2) + " ms")
+            #main.log.info("ONOS3 delta OFP - device: "+
+            #        str(delta_ofp_device_3) + " ms")
 
             main.step("Remove switch from controller")
             main.Mininet1.delete_sw_controller("s1")
@@ -426,21 +437,17 @@
                  len(latency_ofp_to_device_list))
 
         main.log.report("Switch add - End-to-end latency: \n"+\
-                "Min: "+str(latency_end_to_end_min)+"\n"+\
-                "Max: "+str(latency_end_to_end_max)+"\n"+\
-                "Avg: "+str(latency_end_to_end_avg))
+                "Min: "+str(latency_end_to_end_min)+" mx\n"+\
+                "Max: "+str(latency_end_to_end_max)+" ms\n"+\
+                "Avg: "+str(latency_end_to_end_avg)+" ms")
         main.log.report("Switch add - OFP-to-Graph latency: \n"+\
-                "Min: "+str(latency_ofp_to_graph_min)+"\n"+\
-                "Max: "+str(latency_ofp_to_graph_max)+"\n"+\
-                "Avg: "+str(latency_ofp_to_graph_avg))
-        main.log.report("Switch add - OFP-to-Device latency: \n"+\
-                "Min: "+str(latency_ofp_to_device_min)+"\n"+\
-                "Max: "+str(latency_ofp_to_device_max)+"\n"+\
-                "Avg: "+str(latency_ofp_to_device_avg))
+                "Min: "+str(latency_ofp_to_graph_min)+" ms \n"+\
+                "Max: "+str(latency_ofp_to_graph_max)+" ms\n"+\
+                "Avg: "+str(latency_ofp_to_graph_avg)+" ms")
         main.log.report("Switch add - t0-to-Device latency: \n"+\
-                "Min: "+str(latency_t0_to_device_min)+"\n"+\
-                "Max: "+str(latency_t0_to_device_max)+"\n"+\
-                "Avg: "+str(latency_t0_to_device_avg))
+                "Min: "+str(latency_t0_to_device_min)+" ms\n"+\
+                "Max: "+str(latency_t0_to_device_max)+" ms\n"+\
+                "Avg: "+str(latency_t0_to_device_avg)+" ms")
 
         utilities.assert_equals(expect=main.TRUE, actual=assertion,
                 onpass="Switch latency test successful",
@@ -467,7 +474,8 @@
         ONOS_user = main.params['CTRL']['user']
 
         default_sw_port = main.params['CTRL']['port1']
-       
+      
+        assertion = main.TRUE
         #Number of iterations of case
         num_iter = main.params['TEST']['numIter']
        
@@ -475,6 +483,25 @@
         #These are subject to change, hence moved into params
         deviceTimestamp = main.params['JSON']['deviceTimestamp']
         graphTimestamp = main.params['JSON']['graphTimestamp']
+        
+        debug_mode = main.params['TEST']['debugMode']
+
+        local_time = time.strftime('%x %X')
+        if debug_mode == 'on':
+            main.ONOS1.tshark_pcap("eth0",
+                    "/tmp/port_lat_pcap"+local_time) 
+
+        #Threshold for this test case
+        up_threshold_str = main.params['TEST']['portUpThreshold']
+        down_threshold_str = main.params['TEST']['portDownThreshold']
+        up_threshold_obj = up_threshold_str.split(",")
+        down_threshold_obj = down_threshold_str.split(",")
+
+        up_threshold_min = int(up_threshold_obj[0])
+        up_threshold_max = int(up_threshold_obj[1])
+
+        down_threshold_min = int(down_threshold_obj[0])
+        down_threshold_max = int(down_threshold_obj[1])
 
         #NOTE: Some hardcoded variables you may need to configure
         #      besides the params
@@ -493,6 +520,11 @@
         main.Mininet1.assign_sw_controller(sw="2",ip1=ONOS1_ip,
                 port1=default_sw_port)
 
+        #Give enough time for metrics to propagate the 
+        #assign controller event. Otherwise, these events may
+        #carry over to our measurements
+        time.sleep(10)
+
         main.step("Verify switch is assigned correctly")
         result_s1 = main.Mininet1.get_sw_controller(sw="s1")
         result_s2 = main.Mininet1.get_sw_controller(sw="s2")
@@ -519,7 +551,7 @@
             main.Mininet2.handle.sendline("sudo ifconfig "+
                     interface_config+" down")
             main.Mininet2.handle.expect("\$")
-            time.sleep(20)
+            time.sleep(10)
 
             main.ONOS1.tshark_stop()
             time.sleep(5)
@@ -597,11 +629,11 @@
             pt_down_graph_to_ofp_avg =\
                     (int(pt_down_graph_to_ofp_1) +
                      int(pt_down_graph_to_ofp_2) + 
-                     int(pt_down_graph_to_ofp_3)) / 3
+                     int(pt_down_graph_to_ofp_3)) / 3.0
             pt_down_device_to_ofp_avg = \
                     (int(pt_down_device_to_ofp_1) + 
                      int(pt_down_device_to_ofp_2) +
-                     int(pt_down_device_to_ofp_3)) / 3
+                     int(pt_down_device_to_ofp_3)) / 3.0
 
             if pt_down_graph_to_ofp_avg > 0.0 and \
                     pt_down_graph_to_ofp_avg < 1000:
@@ -629,12 +661,14 @@
             main.step("Enable port and obtain timestamp")
             main.step("Starting wireshark capture for port status up")
             main.ONOS1.tshark_grep("OFP 130 Port Status", tshark_port_up)
-            time.sleep(10)
+            time.sleep(5)
 
             main.Mininet2.handle.sendline("sudo ifconfig "+
                     interface_config+" up")
             main.Mininet2.handle.expect("\$")
-            time.sleep(20)
+            time.sleep(10)
+            
+            main.ONOS1.tshark_stop()
 
             os.system("scp "+ONOS_user+"@"+ONOS1_ip+":"+
                     tshark_port_up+" /tmp/")
@@ -706,8 +740,8 @@
                      float(pt_up_device_to_ofp_2) +
                      float(pt_up_device_to_ofp_3)) / 3
 
-            if pt_up_graph_to_ofp_avg > 0 and \
-                    pt_up_graph_to_ofp_avg < 1000:
+            if pt_up_graph_to_ofp_avg > up_threshold_min and \
+                    pt_up_graph_to_ofp_avg < up_threshold_max: 
                 port_up_graph_to_ofp_list.append(
                         pt_up_graph_to_ofp_avg)
                 main.log.info("Port down: graph to ofp avg: "+
@@ -717,8 +751,8 @@
                         " exceeded the threshold: "+
                         str(pt_up_graph_to_ofp_avg))
             
-            if pt_up_device_to_ofp_avg > 0 and \
-                    pt_up_device_to_ofp_avg < 1000:
+            if pt_up_device_to_ofp_avg > up_threshold_min and \
+                    pt_up_device_to_ofp_avg < up_threshold_max:
                 port_up_device_to_ofp_list.append(
                         pt_up_device_to_ofp_avg)
                 main.log.info("Port up: device to ofp avg: "+
@@ -729,7 +763,12 @@
                         str(pt_up_device_to_ofp_avg))
             
             #END ITERATION FOR LOOP
-       
+        
+        #Check all list for latency existence and set assertion
+        if (port_down_graph_to_ofp_list and port_down_device_to_ofp_list\
+           and port_up_graph_to_ofp_list and port_up_device_to_ofp_list):
+            assertion = main.TRUE
+
         #Calculate and report latency measurements
         port_down_graph_to_ofp_min = min(port_down_graph_to_ofp_list)
         port_down_graph_to_ofp_max = max(port_down_graph_to_ofp_list)
@@ -737,12 +776,10 @@
                 (sum(port_down_graph_to_ofp_list) / 
                  len(port_down_graph_to_ofp_list))
         
-        main.log.report("Port down graph-to-ofp Min: "+
-                str(port_down_graph_to_ofp_min))
-        main.log.report("Port down graph-to-ofp Max: "+
-                str(port_down_graph_to_ofp_max))
-        main.log.report("Port down graph-to-ofp Avg: "+
-                str(port_down_graph_to_ofp_avg))
+        main.log.report("Port down graph-to-ofp \nMin: "+
+                str(port_down_graph_to_ofp_min)+" ms  \nMax: "+
+                str(port_down_graph_to_ofp_max)+" ms  \nAvg: "+
+                str(port_down_graph_to_ofp_avg)+" ms")
         
         port_down_device_to_ofp_min = min(port_down_device_to_ofp_list)
         port_down_device_to_ofp_max = max(port_down_device_to_ofp_list)
@@ -750,19 +787,36 @@
                 (sum(port_down_device_to_ofp_list) /\
                  len(port_down_device_to_ofp_list))
         
-        main.log.report("Port down device-to-ofp Min: "+
-                str(port_down_device_to_ofp_min))
-        main.log.report("Port down device-to-ofp Max: "+
-                str(port_down_device_to_ofp_max))
-        main.log.report("Port down device-to-ofp Avg: "+
-                str(port_down_device_to_ofp_avg))
+        main.log.report("Port down device-to-ofp \nMin: "+
+                str(port_down_device_to_ofp_min)+" ms  \nMax: "+
+                str(port_down_device_to_ofp_max)+" ms  \nAvg: "+
+                str(port_down_device_to_ofp_avg)+" ms")
         
         port_up_graph_to_ofp_min = min(port_up_graph_to_ofp_list)
         port_up_graph_to_ofp_max = max(port_up_graph_to_ofp_list)
         port_up_graph_to_ofp_avg = \
                 (sum(port_up_graph_to_ofp_list) /\
                  len(port_up_graph_to_ofp_list))
-           
+        
+        main.log.report("Port up graph-to-ofp \nMin: "+
+                str(port_up_graph_to_ofp_min)+" ms  \nMax: "+
+                str(port_up_graph_to_ofp_max)+" ms  \nAvg: "+
+                str(port_up_graph_to_ofp_avg)+" ms")
+          
+        port_up_device_to_ofp_min = min(port_up_device_to_ofp_list)
+        port_up_device_to_ofp_max = max(port_up_device_to_ofp_list)
+        port_up_device_to_ofp_avg = \
+                (sum(port_up_device_to_ofp_list) /\
+                 len(port_up_device_to_ofp_list))
+        
+        main.log.report("Port up device-to-ofp \nMin: "+
+                str(port_up_device_to_ofp_min)+" ms  \nMax: "+
+                str(port_up_device_to_ofp_max)+" ms  \nAvg: "+
+                str(port_up_device_to_ofp_avg)+" ms")
+
+        utilities.assert_equals(expect=main.TRUE, actual=assertion,
+                onpass="Port discovery latency calculation successful",
+                onfail="Port discovery test failed")
 
     def CASE4(self, main):
         '''
@@ -794,6 +848,26 @@
         deviceTimestamp = main.params['JSON']['deviceTimestamp']
         linkTimestamp = main.params['JSON']['linkTimestamp'] 
         graphTimestamp = main.params['JSON']['graphTimestamp']
+        
+        debug_mode = main.params['TEST']['debugMode']
+
+        local_time = time.strftime('%x %X')
+        if debug_mode == 'on':
+            main.ONOS1.tshark_pcap("eth0",
+                    "/tmp/link_lat_pcap"+local_time) 
+
+        #Threshold for this test case
+        up_threshold_str = main.params['TEST']['linkUpThreshold']
+        down_threshold_str = main.params['TEST']['linkDownThreshold']
+
+        up_threshold_obj = up_threshold_str.split(",")
+        down_threshold_obj = down_threshold_str.split(",")
+
+        up_threshold_min = int(up_threshold_obj[0])
+        up_threshold_max = int(up_threshold_obj[1])
+
+        down_threshold_min = int(down_threshold_obj[0])
+        down_threshold_max = int(down_threshold_obj[1])
 
         assertion = main.TRUE
         #Link event timestamp to system time list
@@ -972,14 +1046,22 @@
                      link_down_lat_link3) / 3.0
 
             #Set threshold and append latency to list
-            if link_down_lat_graph_avg > 0.0 and\
-               link_down_lat_graph_avg < 30000:
+            if link_down_lat_graph_avg > down_threshold_min and\
+               link_down_lat_graph_avg < down_threshold_max:
                 link_down_graph_to_system_list.append(
                         link_down_lat_graph_avg)
-            if link_down_lat_link_avg > 0.0 and\
-               link_down_lat_link_avg < 30000:
+            else:
+                main.log.info("Link down latency exceeded threshold")
+                main.log.info("Results for iteration "+str(i)+
+                        "have been omitted")
+            if link_down_lat_link_avg > down_threshold_min and\
+               link_down_lat_link_avg < down_threshold_max:
                 link_down_link_to_system_list.append(
                         link_down_lat_link_avg)
+            else:
+                main.log.info("Link down latency exceeded threshold")
+                main.log.info("Results for iteration "+str(i)+
+                        "have been omitted")
 
             #NOTE: To remove loss rate and measure latency:
             #       'sh tc qdisc del dev s1-eth1 root'
@@ -1089,24 +1171,25 @@
                     link_up_lat_device1 = 0
                     link_up_lat_device2 = 0
                     link_up_lat_device3 = 0
-        
-            main.log.info("Link up latency ONOS1 iteration "+
+       
+            if debug_mode == 'on':
+                main.log.info("Link up latency ONOS1 iteration "+
                     str(i)+" (end-to-end): "+
                     str(link_up_lat_graph1)+" ms")
-            main.log.info("Link up latency ONOS2 iteration "+
+                main.log.info("Link up latency ONOS2 iteration "+
                     str(i)+" (end-to-end): "+
                     str(link_up_lat_graph2)+" ms")
-            main.log.info("Link up latency ONOS3 iteration "+
+                main.log.info("Link up latency ONOS3 iteration "+
                     str(i)+" (end-to-end): "+
                     str(link_up_lat_graph3)+" ms")
             
-            main.log.info("Link up latency ONOS1 iteration "+
+                main.log.info("Link up latency ONOS1 iteration "+
                     str(i)+" (link-event-to-system-timestamp): "+
                     str(link_up_lat_link1)+" ms")
-            main.log.info("Link up latency ONOS2 iteration "+
+                main.log.info("Link up latency ONOS2 iteration "+
                     str(i)+" (link-event-to-system-timestamp): "+
                     str(link_up_lat_link2)+" ms")
-            main.log.info("Link up latency ONOS3 iteration "+
+                main.log.info("Link up latency ONOS3 iteration "+
                     str(i)+" (link-event-to-system-timestamp): "+
                     str(link_up_lat_link3))
       
@@ -1121,14 +1204,22 @@
                      link_up_lat_link3) / 3.0
 
             #Set threshold and append latency to list
-            if link_up_lat_graph_avg > 0.0 and\
-               link_up_lat_graph_avg < 30000:
+            if link_up_lat_graph_avg > up_threshold_min and\
+               link_up_lat_graph_avg < up_threshold_max:
                 link_up_graph_to_system_list.append(
                         link_up_lat_graph_avg)
-            if link_up_lat_link_avg > 0.0 and\
-               link_up_lat_link_avg < 30000:
+            else:
+                main.log.info("Link up latency exceeded threshold")
+                main.log.info("Results for iteration "+str(i)+
+                        "have been omitted")
+            if link_up_lat_link_avg > up_threshold_min and\
+               link_up_lat_link_avg < up_threshold_max:
                 link_up_link_to_system_list.append(
                         link_up_lat_link_avg)
+            else:
+                main.log.info("Link up latency exceeded threshold")
+                main.log.info("Results for iteration "+str(i)+
+                        "have been omitted")
 
         #Calculate min, max, avg of list and report
         link_down_min = min(link_down_graph_to_system_list)
@@ -1140,28 +1231,33 @@
         link_up_avg = sum(link_up_graph_to_system_list) / \
                         len(link_up_graph_to_system_list)
 
-        main.log.report("Link down latency - Min: "+
-                str(link_down_min)+"ms  Max: "+
-                str(link_down_max)+"ms  Avg: "+
-                str(link_down_avg)+"ms")
-        main.log.report("Link up latency - Min: "+
-                str(link_up_min)+"ms  Max: "+
-                str(link_up_max)+"ms  Avg: "+
-                str(link_up_avg)+"ms")
+        main.log.report("Link down latency - \nMin: "+
+                str(link_down_min)+" ms  \nMax: "+
+                str(link_down_max)+" ms  \nAvg: "+
+                str(link_down_avg)+" ms")
+        main.log.report("Link up latency - \nMin: "+
+                str(link_up_min)+" ms  \nMax: "+
+                str(link_up_max)+" ms  \nAvg: "+
+                str(link_up_avg)+" ms")
+
+        utilities.assert_equals(expect=main.TRUE, actual=assertion,
+                onpass="Link discovery latency calculation successful",
+                onfail="Link discovery latency case failed")
 
     def CASE5(self, main):
         '''
         100 Switch discovery latency
 
         Important:
-            If a simple topology was used in previous cases,
-            you will need to change the topology file in the
-            params for this case to proceed
-        
             This test case can be potentially dangerous if 
             your machine has previously set iptables rules.
             One of the steps of the test case will flush
             all existing iptables rules.
+        Note:
+            You can specify the number of switches in the 
+            params file to adjust the switch discovery size
+            (and specify the corresponding topology in Mininet1 
+            .topo file)
         '''
         import time
         import subprocess
@@ -1185,13 +1281,28 @@
         #These are subject to change, hence moved into params
         deviceTimestamp = main.params['JSON']['deviceTimestamp']
         graphTimestamp = main.params['JSON']['graphTimestamp']
-   
+        
+        debug_mode = main.params['TEST']['debugMode']
+
+        local_time = time.strftime('%x %X')
+        if debug_mode == 'on':
+            main.ONOS1.tshark_pcap("eth0",
+                    "/tmp/100_sw_lat_pcap"+local_time) 
+ 
+        #Threshold for this test case
+        sw_disc_threshold_str = main.params['TEST']['swDisc100Threshold']
+        sw_disc_threshold_obj = sw_disc_threshold_str.split(",")
+        sw_disc_threshold_min = int(sw_disc_threshold_obj[0])
+        sw_disc_threshold_max = int(sw_disc_threshold_obj[1])
+
         tshark_ofp_output = "/tmp/tshark_ofp_"+num_sw+"sw.txt"
         tshark_tcp_output = "/tmp/tshark_tcp_"+num_sw+"sw.txt"
 
         tshark_ofp_result_list = []
         tshark_tcp_result_list = []
 
+        sw_discovery_lat_list = []
+
         main.case(num_sw+" Switch discovery latency")
         main.step("Assigning all switches to ONOS1")
         for i in range(1, int(num_sw)+1):
@@ -1230,6 +1341,8 @@
                     " --dport "+default_sw_port+" -j DROP")
             main.ONOS1.handle.expect("\$")
             #Give time to allow rule to take effect
+            #NOTE: Sleep period may need to be configured 
+            #      based on the number of switches in the topology
             main.log.info("Please wait for switch connection to "+
                     "time out")
             time.sleep(60)
@@ -1323,24 +1436,23 @@
                     tshark_ofp_output+" /tmp/") 
             os.system("scp "+ONOS_user+"@"+ONOS1_ip+":"+
                     tshark_tcp_output+" /tmp/")
-            ofp_file = open(tshark_ofp_output, 'r')
 
-            #The following is for information purpose only.
             #TODO: Automate OFP output analysis
-            main.log.info("Tshark OFP Vendor output: ")
-            for line in ofp_file:
-                tshark_ofp_result_list.append(line)
-                main.log.info(line)
+            #Debug mode - print out packets captured at runtime     
+            if debug_mode == 'on': 
+                ofp_file = open(tshark_ofp_output, 'r')
+                main.log.info("Tshark OFP Vendor output: ")
+                for line in ofp_file:
+                    tshark_ofp_result_list.append(line)
+                    main.log.info(line)
+                ofp_file.close()
 
-            ofp_file.close()
-
-            tcp_file = open(tshark_tcp_output, 'r')
-            main.log.info("Tshark TCP 74 output: ")
-            for line in tcp_file:
-                tshark_tcp_result_list.append(line)
-                main.log.info(line)
-
-            tcp_file.close()
+                tcp_file = open(tshark_tcp_output, 'r')
+                main.log.info("Tshark TCP 74 output: ")
+                for line in tcp_file:
+                    tshark_tcp_result_list.append(line)
+                    main.log.info(line)
+                tcp_file.close()
 
             json_obj_1 = json.loads(json_str_topology_metrics_1)
             json_obj_2 = json.loads(json_str_topology_metrics_2)
@@ -1353,16 +1465,33 @@
             graph_timestamp_3 = \
                     json_obj_3[graphTimestamp]['value']
 
-            main.log.info(
-                    int(graph_timestamp_1) - int(t0_system))
-            main.log.info(
-                    int(graph_timestamp_2) - int(t0_system))
-            main.log.info(
-                    int(graph_timestamp_3) - int(t0_system))
+            graph_lat_1 = int(graph_timestamp_1) - int(t0_system)
+            graph_lat_2 = int(graph_timestamp_2) - int(t0_system)
+            graph_lat_3 = int(graph_timestamp_3) - int(t0_system)
 
+            avg_graph_lat = \
+                    (int(graph_lat_1) +\
+                     int(graph_lat_2) +\
+                     int(graph_lat_3)) / 3
+    
+            if avg_graph_lat > sw_disc_threshold_min \
+                    and avg_graph_lat < sw_disc_threshold_max:
+                sw_discovery_lat_list.append(
+                        avg_graph_lat)
+            else:
+                main.log.info("100 Switch discovery latency "+
+                        "exceeded the threshold.")
+            
+            #END ITERATION FOR LOOP
 
+        sw_lat_min = min(sw_discovery_lat_list)
+        sw_lat_max = max(sw_discovery_lat_list)
+        sw_lat_avg = sum(sw_discovery_lat_list) /\
+                     len(sw_discovery_lat_list)
 
-
-
+        main.log.report("100 Switch discovery lat - \n"+\
+                "Min: "+str(sw_lat_min)+" ms\n"+\
+                "Max: "+str(sw_lat_max)+" ms\n"+\
+                "Avg: "+str(sw_lat_avg)+" ms\n")
 
 
diff --git a/TestON/tests/TopoPerfNextSingleNode/TopoPerfNextSingleNode.params b/TestON/tests/TopoPerfNextSingleNode/TopoPerfNextSingleNode.params
new file mode 100644
index 0000000..f797706
--- /dev/null
+++ b/TestON/tests/TopoPerfNextSingleNode/TopoPerfNextSingleNode.params
@@ -0,0 +1,45 @@
+<PARAMS>
+    <testcases>1,2,3,4,5</testcases>
+
+    <ENV>
+        <cellName>topo_perf_test</cellName>
+    </ENV>
+
+    <GIT>
+        #autoPull 'on' or 'off'
+        <autoPull>off</autoPull>
+        <checkout>master</checkout>
+    </GIT>
+
+    <CTRL>
+        <user>admin</user>
+        <ip1>10.128.174.1</ip1>
+        <port1>6633</port1>
+        <ip2>10.128.174.2</ip2>
+        <port2>6633</port2>
+        <ip3>10.128.174.3</ip3>
+        <port3>6633</port3>
+    </CTRL>
+
+    <MN>
+        <ip1>10.128.10.90</ip1>
+        <ip2>10.128.10.91</ip2>
+    </MN>
+
+    <BENCH>
+        <ip>10.128.174.10</ip>
+    </BENCH>
+
+    <TEST>
+        #Number of times to iterate each case
+        <numIter>5</numIter>
+        <numSwitch>100</numSwitch>         
+    </TEST>
+
+    <JSON>
+        <deviceTimestamp>topologyDeviceEventTimestamp</deviceTimestamp>
+        <hostTimestamp>topologyHostEventTimestamp</hostTimestamp>
+        <linkTimestamp>topologyLinkEventTimestamp</linkTimestamp>
+        <graphTimestamp>topologyGraphEventTimestamp</graphTimestamp>
+    </JSON>
+</PARAMS>
diff --git a/TestON/tests/TopoPerfNextSingleNode/TopoPerfNextSingleNode.py b/TestON/tests/TopoPerfNextSingleNode/TopoPerfNextSingleNode.py
new file mode 100644
index 0000000..d10c0ee
--- /dev/null
+++ b/TestON/tests/TopoPerfNextSingleNode/TopoPerfNextSingleNode.py
@@ -0,0 +1,1108 @@
+#TopoPerfNext
+#
+#Topology Performance test for ONOS-next
+#*** Revised for single node operation ***
+#
+#andrew@onlab.us
+
+import time
+import sys
+import os
+import re
+
+class TopoPerfNextSingleNode:
+    def __init__(self):
+        self.default = ''
+
+    def CASE1(self, main):
+        '''
+        ONOS startup sequence
+        '''
+        import time
+    
+        cell_name = main.params['ENV']['cellName']
+
+        git_pull = main.params['GIT']['autoPull']
+        checkout_branch = main.params['GIT']['checkout']
+
+        ONOS1_ip = main.params['CTRL']['ip1']
+        MN1_ip = main.params['MN']['ip1']
+        BENCH_ip = main.params['BENCH']['ip']
+
+        main.case("Setting up test environment")
+
+        main.step("Creating cell file")
+        cell_file_result = main.ONOSbench.create_cell_file(
+                BENCH_ip, cell_name, MN1_ip, "onos-core",
+                ONOS1_ip)
+
+        main.step("Applying cell file to environment")
+        cell_apply_result = main.ONOSbench.set_cell(cell_name)
+        verify_cell_result = main.ONOSbench.verify_cell()
+        
+        main.step("Git checkout and pull "+checkout_branch)
+        if git_pull == 'on':
+            checkout_result = \
+                    main.ONOSbench.git_checkout(checkout_branch)
+            pull_result = main.ONOSbench.git_pull()
+        else:
+            checkout_result = main.TRUE
+            pull_result = main.TRUE
+            main.log.info("Skipped git checkout and pull")
+
+        main.step("Using mvn clean & install")
+        #mvn_result = main.ONOSbench.clean_install()
+        mvn_result = main.TRUE
+
+        main.step("Creating ONOS package")
+        package_result = main.ONOSbench.onos_package()
+
+        main.step("Installing ONOS package")
+        install1_result = main.ONOSbench.onos_install(node=ONOS1_ip)
+
+        #NOTE: This step may be unnecessary
+        #main.step("Starting ONOS service")
+        #start_result = main.ONOSbench.onos_start(ONOS1_ip)
+
+        main.step("Set cell for ONOS cli env")
+        main.ONOS1cli.set_cell(cell_name)
+
+        time.sleep(10)
+
+        main.step("Start onos cli")
+        cli1 = main.ONOS1cli.start_onos_cli(ONOS1_ip)
+
+        main.step("Enable metrics feature")
+        main.ONOS1cli.feature_install("onos-app-metrics")
+
+        utilities.assert_equals(expect=main.TRUE,
+                actual= cell_file_result and cell_apply_result and\
+                        verify_cell_result and checkout_result and\
+                        pull_result and mvn_result and\
+                        install1_result, 
+                onpass="ONOS started successfully",
+                onfail="Failed to start ONOS")
+
+    def CASE2(self, main):
+        '''
+        Assign s1 to ONOS1 and measure latency
+        
+        There are 4 levels of latency measurements to this test:
+        1) End-to-end measurement: Complete end-to-end measurement
+           from TCP (SYN/ACK) handshake to Graph change
+        2) OFP-to-graph measurement: 'ONOS processing' snippet of
+           measurement from OFP Vendor message to Graph change
+        3) OFP-to-device measurement: 'ONOS processing without 
+           graph change' snippet of measurement from OFP vendor
+           message to Device change timestamp
+        4) T0-to-device measurement: Measurement that includes
+           the switch handshake to devices timestamp without 
+           the graph view change. (TCP handshake -> Device 
+           change)
+        '''
+        import time
+        import subprocess
+        import json
+        import requests
+        import os
+
+        ONOS1_ip = main.params['CTRL']['ip1']
+        ONOS_user = main.params['CTRL']['user']
+
+        default_sw_port = main.params['CTRL']['port1']
+       
+        #Number of iterations of case
+        num_iter = main.params['TEST']['numIter']
+       
+        #Timestamp 'keys' for json metrics output.
+        #These are subject to change, hence moved into params
+        deviceTimestamp = main.params['JSON']['deviceTimestamp']
+        graphTimestamp = main.params['JSON']['graphTimestamp']
+
+        #List of switch add latency collected from
+        #all iterations
+        latency_end_to_end_list = []
+        latency_ofp_to_graph_list = []
+        latency_ofp_to_device_list = []
+        latency_t0_to_device_list = []
+
+        #Directory/file to store tshark results
+        tshark_of_output = "/tmp/tshark_of_topo.txt"
+        tshark_tcp_output = "/tmp/tshark_tcp_topo.txt"
+
+        #String to grep in tshark output
+        tshark_tcp_string = "TCP 74 "+default_sw_port
+        tshark_of_string = "OFP 86 Vendor"
+     
+        #Initialize assertion to TRUE
+        assertion = main.TRUE
+        
+        main.log.report("Latency of adding one switch")
+
+        for i in range(0, int(num_iter)):
+            main.log.info("Starting tshark capture")
+
+            #* TCP [ACK, SYN] is used as t0_a, the
+            #  very first "exchange" between ONOS and 
+            #  the switch for end-to-end measurement
+            #* OFP [Stats Reply] is used for t0_b
+            #  the very last OFP message between ONOS
+            #  and the switch for ONOS measurement
+            main.ONOS1.tshark_grep(tshark_tcp_string,
+                    tshark_tcp_output)
+            main.ONOS1.tshark_grep(tshark_of_string,
+                    tshark_of_output)
+
+            #Wait and ensure tshark is started and 
+            #capturing
+            time.sleep(10)
+
+            main.log.info("Assigning s1 to controller")
+
+            main.Mininet1.assign_sw_controller(sw="1",
+                    ip1=ONOS1_ip, port1=default_sw_port)
+
+            #Wait and ensure switch is assigned
+            #before stopping tshark
+            time.sleep(30)
+   
+            main.log.info("Stopping all Tshark processes")
+            main.ONOS1.stop_tshark()
+
+            #tshark output is saved in ONOS. Use subprocess
+            #to copy over files to TestON for parsing
+            main.log.info("Copying over tshark files")
+            
+            #TCP CAPTURE ****
+            #Copy the tshark output from ONOS machine to
+            #TestON machine in tshark_tcp_output directory>file
+            os.system("scp "+ONOS_user+"@"+ONOS1_ip+":"+
+                    tshark_tcp_output+" /tmp/") 
+            tcp_file = open(tshark_tcp_output, 'r')
+            temp_text = tcp_file.readline()
+            temp_text = temp_text.split(" ")
+
+            main.log.info("Object read in from TCP capture: "+
+                    str(temp_text))
+            if len(temp_text) > 1:
+                t0_tcp = float(temp_text[1])*1000.0
+            else:
+                main.log.error("Tshark output file for TCP"+
+                        " returned unexpected results")
+                t0_tcp = 0
+                assertion = main.FALSE
+            
+            tcp_file.close()
+            #****************
+
+            #OF CAPTURE ****
+            os.system("scp "+ONOS_user+"@"+ONOS1_ip+":"+
+                    tshark_of_output+" /tmp/")
+            of_file = open(tshark_of_output, 'r')
+           
+            line_ofp = ""
+            #Read until last line of file
+            while True:
+                temp_text = of_file.readline()
+                if temp_text !='':
+                    line_ofp = temp_text
+                else:
+                    break 
+            obj = line_ofp.split(" ")
+            
+            main.log.info("Object read in from OFP capture: "+
+                    str(line_ofp))
+    
+            if len(line_ofp) > 1:
+                t0_ofp = float(obj[1])*1000.0
+            else:
+                main.log.error("Tshark output file for OFP"+
+                        " returned unexpected results")
+                t0_ofp = 0
+                assertion = main.FALSE
+            
+            of_file.close()
+            #****************
+           
+            json_str_1 = main.ONOS1cli.topology_events_metrics()
+
+            json_obj_1 = json.loads(json_str_1)
+
+            #Obtain graph timestamp. This timestsamp captures
+            #the epoch time at which the topology graph was updated.
+            graph_timestamp_1 = \
+                    json_obj_1[graphTimestamp]['value']
+
+            #Obtain device timestamp. This timestamp captures
+            #the epoch time at which the device event happened
+            device_timestamp_1 = \
+                    json_obj_1[deviceTimestamp]['value'] 
+            
+            #t0 to device processing latency 
+            delta_device_1 = int(device_timestamp_1) - int(t0_tcp)
+        
+            #Get average of delta from all instances
+            avg_delta_device = (int(delta_device_1))
+
+            #Ensure avg delta meets the threshold before appending
+            if avg_delta_device > 0.0 and avg_delta_device < 10000:
+                latency_t0_to_device_list.append(avg_delta_device)
+            else:
+                main.log.info("Results for t0-to-device ignored"+\
+                        "due to excess in threshold")
+
+            #t0 to graph processing latency (end-to-end)
+            delta_graph_1 = int(graph_timestamp_1) - int(t0_tcp)
+        
+            #Get average of delta from all instances
+            avg_delta_graph = int(delta_graph_1)
+
+            #Ensure avg delta meets the threshold before appending
+            if avg_delta_graph > 0.0 and avg_delta_graph < 10000:
+                latency_end_to_end_list.append(avg_delta_graph)
+            else:
+                main.log.info("Results for end-to-end ignored"+\
+                        "due to excess in threshold")
+
+            #ofp to graph processing latency (ONOS processing)
+            delta_ofp_graph_1 = int(graph_timestamp_1) - int(t0_ofp)
+            
+            avg_delta_ofp_graph = int(delta_ofp_graph_1)
+            
+            if avg_delta_ofp_graph > 0.0 and avg_delta_ofp_graph < 10000:
+                latency_ofp_to_graph_list.append(avg_delta_ofp_graph)
+            else:
+                main.log.info("Results for ofp-to-graph "+\
+                        "ignored due to excess in threshold")
+
+            #ofp to device processing latency (ONOS processing)
+            delta_ofp_device_1 = float(device_timestamp_1) - float(t0_ofp)
+            
+            avg_delta_ofp_device = float(delta_ofp_device_1)
+            
+            #NOTE: ofp - delta measurements are occasionally negative
+            #      due to system time misalignment.
+            latency_ofp_to_device_list.append(avg_delta_ofp_device)
+
+            #TODO:
+            #Fetch logs upon threshold excess
+
+            main.log.info("ONOS1 delta end-to-end: "+
+                    str(delta_graph_1) + " ms")
+
+            main.log.info("ONOS1 delta OFP - graph: "+
+                    str(delta_ofp_graph_1) + " ms")
+            
+            main.log.info("ONOS1 delta device - t0: "+
+                    str(delta_device_1) + " ms")
+          
+            main.step("Remove switch from controller")
+            main.Mininet1.delete_sw_controller("s1")
+
+            time.sleep(5)
+
+        #END of for loop iteration
+
+        #If there is at least 1 element in each list,
+        #pass the test case
+        if len(latency_end_to_end_list) > 0 and\
+           len(latency_ofp_to_graph_list) > 0 and\
+           len(latency_ofp_to_device_list) > 0 and\
+           len(latency_t0_to_device_list) > 0:
+            assertion = main.TRUE
+        elif len(latency_end_to_end_list) == 0:
+            #The appending of 0 here is to prevent 
+            #the min,max,sum functions from failing 
+            #below
+            latency_end_to_end_list.append(0)
+            assertion = main.FALSE
+        elif len(latency_ofp_to_graph_list) == 0:
+            latency_ofp_to_graph_list.append(0)
+            assertion = main.FALSE
+        elif len(latency_ofp_to_device_list) == 0:
+            latency_ofp_to_device_list.append(0)
+            assertion = main.FALSE
+        elif len(latency_t0_to_device_list) == 0:
+            latency_t0_to_device_list.append(0)
+            assertion = main.FALSE
+
+        #Calculate min, max, avg of latency lists
+        latency_end_to_end_max = \
+                int(max(latency_end_to_end_list))
+        latency_end_to_end_min = \
+                int(min(latency_end_to_end_list))
+        latency_end_to_end_avg = \
+                (int(sum(latency_end_to_end_list)) / \
+                 len(latency_end_to_end_list))
+   
+        latency_ofp_to_graph_max = \
+                int(max(latency_ofp_to_graph_list))
+        latency_ofp_to_graph_min = \
+                int(min(latency_ofp_to_graph_list))
+        latency_ofp_to_graph_avg = \
+                (int(sum(latency_ofp_to_graph_list)) / \
+                 len(latency_ofp_to_graph_list))
+
+        latency_ofp_to_device_max = \
+                int(max(latency_ofp_to_device_list))
+        latency_ofp_to_device_min = \
+                int(min(latency_ofp_to_device_list))
+        latency_ofp_to_device_avg = \
+                (int(sum(latency_ofp_to_device_list)) / \
+                 len(latency_ofp_to_device_list))
+
+        latency_t0_to_device_max = \
+                float(max(latency_t0_to_device_list))
+        latency_t0_to_device_min = \
+                float(min(latency_t0_to_device_list))
+        latency_t0_to_device_avg = \
+                (float(sum(latency_t0_to_device_list)) / \
+                 len(latency_ofp_to_device_list))
+
+        main.log.report("Switch add - End-to-end latency: \n"+\
+                "Min: "+str(latency_end_to_end_min)+"\n"+\
+                "Max: "+str(latency_end_to_end_max)+"\n"+\
+                "Avg: "+str(latency_end_to_end_avg))
+        main.log.report("Switch add - OFP-to-Graph latency: \n"+\
+                "Min: "+str(latency_ofp_to_graph_min)+"\n"+\
+                "Max: "+str(latency_ofp_to_graph_max)+"\n"+\
+                "Avg: "+str(latency_ofp_to_graph_avg))
+        main.log.report("Switch add - t0-to-Device latency: \n"+\
+                "Min: "+str(latency_t0_to_device_min)+"\n"+\
+                "Max: "+str(latency_t0_to_device_max)+"\n"+\
+                "Avg: "+str(latency_t0_to_device_avg))
+
+        utilities.assert_equals(expect=main.TRUE, actual=assertion,
+                onpass="Switch latency test successful",
+                onfail="Switch latency test failed")
+
+    def CASE3(self, main):
+        '''
+        Bring port up / down and measure latency.
+        Port enable / disable is simulated by ifconfig up / down
+        
+        In ONOS-next, we must ensure that the port we are 
+        manipulating is connected to another switch with a valid
+        connection. Otherwise, graph view will not be updated.
+        '''
+        import time
+        import subprocess
+        import os
+        import requests
+        import json
+
+        ONOS1_ip = main.params['CTRL']['ip1']
+        ONOS_user = main.params['CTRL']['user']
+
+        default_sw_port = main.params['CTRL']['port1']
+      
+        assertion = main.TRUE
+        #Number of iterations of case
+        num_iter = main.params['TEST']['numIter']
+       
+        #Timestamp 'keys' for json metrics output.
+        #These are subject to change, hence moved into params
+        deviceTimestamp = main.params['JSON']['deviceTimestamp']
+        graphTimestamp = main.params['JSON']['graphTimestamp']
+
+        #NOTE: Some hardcoded variables you may need to configure
+        #      besides the params
+            
+        tshark_port_status = "OFP 130 Port Status"
+
+        tshark_port_up = "/tmp/tshark_port_up.txt"
+        tshark_port_down = "/tmp/tshark_port_down.txt"
+        interface_config = "s1-eth1"
+
+        main.log.report("Port enable / disable latency")
+
+        main.step("Assign switches s1 and s2 to controller 1")
+        main.Mininet1.assign_sw_controller(sw="1",ip1=ONOS1_ip,
+                port1=default_sw_port)
+        main.Mininet1.assign_sw_controller(sw="2",ip1=ONOS1_ip,
+                port1=default_sw_port)
+
+        #Give enough time for metrics to propagate the 
+        #assign controller event. Otherwise, these events may
+        #carry over to our measurements
+        time.sleep(10)
+
+        main.step("Verify switch is assigned correctly")
+        result_s1 = main.Mininet1.get_sw_controller(sw="s1")
+        result_s2 = main.Mininet1.get_sw_controller(sw="s2")
+        if result_s1 == main.FALSE or result_s2 == main.FALSE:
+            main.log.info("Switch s1 was not assigned correctly")
+            assertion = main.FALSE
+        else:
+            main.log.info("Switch s1 was assigned correctly")
+
+        port_up_device_to_ofp_list = []
+        port_up_graph_to_ofp_list = []
+        port_down_device_to_ofp_list = []
+        port_down_graph_to_ofp_list = []
+
+        for i in range(0, int(num_iter)):
+            main.step("Starting wireshark capture for port status down")
+            main.ONOS1.tshark_grep(tshark_port_status,
+                    tshark_port_down)
+            
+            time.sleep(10)
+
+            #Disable interface that is connected to switch 2
+            main.step("Disable port: "+interface_config)
+            main.Mininet2.handle.sendline("sudo ifconfig "+
+                    interface_config+" down")
+            main.Mininet2.handle.expect("\$")
+            time.sleep(10)
+
+            main.ONOS1.tshark_stop()
+            time.sleep(5)
+            
+            #Copy tshark output file from ONOS to TestON instance
+            #/tmp directory
+            os.system("scp "+ONOS_user+"@"+ONOS1_ip+":"+
+                    tshark_port_down+" /tmp/")
+
+            f_port_down = open(tshark_port_down, 'r')
+            #Get first line of port down event from tshark
+            f_line = f_port_down.readline()
+            obj_down = f_line.split(" ")
+            if len(f_line) > 0:
+                timestamp_begin_pt_down = int(float(obj_down[1]))*1000
+                main.log.info("Port down begin timestamp: "+
+                        str(timestamp_begin_pt_down))
+            else:
+                main.log.info("Tshark output file returned unexpected"+
+                        " results: "+str(obj_down))
+                timestamp_begin_pt_down = 0
+            
+            f_port_down.close()
+
+            main.log.info("TEST tshark obj: "+str(obj_down))
+
+            main.step("Obtain t1 by REST call")
+            json_str_1 = main.ONOS1cli.topology_events_metrics()
+
+            main.log.info("TEST json_str 1: "+str(json_str_1))
+
+            json_obj_1 = json.loads(json_str_1)
+           
+            time.sleep(5)
+
+            #Obtain graph timestamp. This timestsamp captures
+            #the epoch time at which the topology graph was updated.
+            graph_timestamp_1 = \
+                    json_obj_1[graphTimestamp]['value']
+
+            #Obtain device timestamp. This timestamp captures
+            #the epoch time at which the device event happened
+            device_timestamp_1 = \
+                    json_obj_1[deviceTimestamp]['value'] 
+
+            #Get delta between graph event and OFP 
+            pt_down_graph_to_ofp_1 = int(graph_timestamp_1) -\
+                    int(timestamp_begin_pt_down)
+
+            #Get delta between device event and OFP
+            pt_down_device_to_ofp_1 = int(device_timestamp_1) -\
+                    int(timestamp_begin_pt_down)
+       
+            #Caluclate average across clusters
+            pt_down_graph_to_ofp_avg = int(pt_down_graph_to_ofp_1)
+            pt_down_device_to_ofp_avg = int(pt_down_device_to_ofp_1) 
+
+            if pt_down_graph_to_ofp_avg > 0.0 and \
+                    pt_down_graph_to_ofp_avg < 1000:
+                port_down_graph_to_ofp_list.append(
+                    pt_down_graph_to_ofp_avg)
+                main.log.info("Port down: graph to ofp avg: "+
+                    str(pt_down_graph_to_ofp_avg) + " ms")
+            else:
+                main.log.info("Average port down graph-to-ofp result" +
+                        " exceeded the threshold: "+
+                        str(pt_down_graph_to_ofp_avg))
+
+            if pt_down_device_to_ofp_avg > 0 and \
+                    pt_down_device_to_ofp_avg < 1000:
+                port_down_device_to_ofp_list.append(
+                    pt_down_device_to_ofp_avg)
+                main.log.info("Port down: device to ofp avg: "+
+                    str(pt_down_device_to_ofp_avg) + " ms")
+            else:
+                main.log.info("Average port down device-to-ofp result" +
+                        " exceeded the threshold: "+
+                        str(pt_down_device_to_ofp_avg))
+
+            #Port up events 
+            main.step("Enable port and obtain timestamp")
+            main.step("Starting wireshark capture for port status up")
+            main.ONOS1.tshark_grep("OFP 130 Port Status", tshark_port_up)
+            time.sleep(5)
+
+            main.Mininet2.handle.sendline("sudo ifconfig "+
+                    interface_config+" up")
+            main.Mininet2.handle.expect("\$")
+            time.sleep(10)
+            
+            main.ONOS1.tshark_stop()
+
+            os.system("scp "+ONOS_user+"@"+ONOS1_ip+":"+
+                    tshark_port_up+" /tmp/")
+
+            f_port_up = open(tshark_port_up, 'r')
+            f_line = f_port_up.readline()
+            obj_up = f_line.split(" ")
+            if len(f_line) > 0:
+                timestamp_begin_pt_up = int(float(obj_up[1]))*1000
+                main.log.info("Port up begin timestamp: "+
+                        str(timestamp_begin_pt_up))
+            else:
+                main.log.info("Tshark output file returned unexpected"+
+                        " results.")
+                timestamp_begin_pt_up = 0
+            
+            f_port_up.close()
+
+            main.step("Obtain t1 by REST call")
+            json_str_1 = main.ONOS1cli.topology_events_metrics()
+
+            json_obj_1 = json.loads(json_str_1)
+
+            #Obtain graph timestamp. This timestsamp captures
+            #the epoch time at which the topology graph was updated.
+            graph_timestamp_1 = \
+                    json_obj_1[graphTimestamp]['value']
+
+            #Obtain device timestamp. This timestamp captures
+            #the epoch time at which the device event happened
+            device_timestamp_1 = \
+                    json_obj_1[deviceTimestamp]['value'] 
+            
+            #Get delta between graph event and OFP 
+            pt_up_graph_to_ofp_1 = int(graph_timestamp_1) -\
+                    int(timestamp_begin_pt_up)
+
+            #Get delta between device event and OFP
+            pt_up_device_to_ofp_1 = int(device_timestamp_1) -\
+                    int(timestamp_begin_pt_up)
+
+            pt_up_graph_to_ofp_avg = float(pt_up_graph_to_ofp_1) 
+
+            pt_up_device_to_ofp_avg = float(pt_up_device_to_ofp_1) 
+
+            if pt_up_graph_to_ofp_avg > 0 and \
+                    pt_up_graph_to_ofp_avg < 1000:
+                port_up_graph_to_ofp_list.append(
+                        pt_up_graph_to_ofp_avg)
+                main.log.info("Port down: graph to ofp avg: "+
+                    str(pt_up_graph_to_ofp_avg) + " ms")
+            else:
+                main.log.info("Average port up graph-to-ofp result"+
+                        " exceeded the threshold: "+
+                        str(pt_up_graph_to_ofp_avg))
+            
+            if pt_up_device_to_ofp_avg > 0 and \
+                    pt_up_device_to_ofp_avg < 1000:
+                port_up_device_to_ofp_list.append(
+                        pt_up_device_to_ofp_avg)
+                main.log.info("Port up: device to ofp avg: "+
+                    str(pt_up_device_to_ofp_avg) + " ms")
+            else:
+                main.log.info("Average port up device-to-ofp result"+
+                        " exceeded the threshold: "+
+                        str(pt_up_device_to_ofp_avg))
+            
+            #END ITERATION FOR LOOP
+        
+        #Check all list for latency existence and set assertion
+        if (port_down_graph_to_ofp_list and port_down_device_to_ofp_list\
+           and port_up_graph_to_ofp_list and port_up_device_to_ofp_list):
+            assertion = main.TRUE
+
+        #Calculate and report latency measurements
+        port_down_graph_to_ofp_min = min(port_down_graph_to_ofp_list)
+        port_down_graph_to_ofp_max = max(port_down_graph_to_ofp_list)
+        port_down_graph_to_ofp_avg = \
+                (sum(port_down_graph_to_ofp_list) / 
+                 len(port_down_graph_to_ofp_list))
+        
+        main.log.report("Port down graph-to-ofp Min: "+
+                str(port_down_graph_to_ofp_min)+" ms  Max: "+
+                str(port_down_graph_to_ofp_max)+" ms  Avg: "+
+                str(port_down_graph_to_ofp_avg))
+        
+        port_down_device_to_ofp_min = min(port_down_device_to_ofp_list)
+        port_down_device_to_ofp_max = max(port_down_device_to_ofp_list)
+        port_down_device_to_ofp_avg = \
+                (sum(port_down_device_to_ofp_list) /\
+                 len(port_down_device_to_ofp_list))
+        
+        main.log.report("Port down device-to-ofp Min: "+
+                str(port_down_device_to_ofp_min)+" ms  Max: "+
+                str(port_down_device_to_ofp_max)+" ms  Avg: "+
+                str(port_down_device_to_ofp_avg))
+        
+        port_up_graph_to_ofp_min = min(port_up_graph_to_ofp_list)
+        port_up_graph_to_ofp_max = max(port_up_graph_to_ofp_list)
+        port_up_graph_to_ofp_avg = \
+                (sum(port_up_graph_to_ofp_list) /\
+                 len(port_up_graph_to_ofp_list))
+        
+        main.log.report("Port up graph-to-ofp Min: "+
+                str(port_up_graph_to_ofp_min)+" ms  Max: "+
+                str(port_up_graph_to_ofp_max)+" ms  Avg: "+
+                str(port_up_graph_to_ofp_avg))
+          
+        port_up_device_to_ofp_min = min(port_up_device_to_ofp_list)
+        port_up_device_to_ofp_max = max(port_up_device_to_ofp_list)
+        port_up_device_to_ofp_avg = \
+                (sum(port_up_device_to_ofp_list) /\
+                 len(port_up_device_to_ofp_list))
+        
+        main.log.report("Port up device-to-ofp Min: "+
+                str(port_up_device_to_ofp_min)+" ms  Max: "+
+                str(port_up_device_to_ofp_max)+" ms  Avg: "+
+                str(port_up_device_to_ofp_avg))
+
+        utilities.assert_equals(expect=main.TRUE, actual=assertion,
+                onpass="Port discovery latency calculation successful",
+                onfail="Port discovery test failed")
+
+    def CASE4(self, main):
+        '''
+        Link down event using loss rate 100%
+        
+        Important:
+            Use a simple 2 switch topology with 1 link between
+            the two switches. Ensure that mac addresses of the 
+            switches are 1 / 2 respectively
+        '''
+        import time
+        import subprocess
+        import os
+        import requests
+        import json
+
+        ONOS1_ip = main.params['CTRL']['ip1']
+        ONOS_user = main.params['CTRL']['user']
+
+        default_sw_port = main.params['CTRL']['port1']
+       
+        #Number of iterations of case
+        num_iter = main.params['TEST']['numIter']
+       
+        #Timestamp 'keys' for json metrics output.
+        #These are subject to change, hence moved into params
+        deviceTimestamp = main.params['JSON']['deviceTimestamp']
+        linkTimestamp = main.params['JSON']['linkTimestamp'] 
+        graphTimestamp = main.params['JSON']['graphTimestamp']
+
+        assertion = main.TRUE
+        #Link event timestamp to system time list
+        link_down_link_to_system_list = []
+        link_up_link_to_system_list = []
+        #Graph event timestamp to system time list
+        link_down_graph_to_system_list = []
+        link_up_graph_to_system_list = [] 
+
+        main.log.report("Add / remove link latency between "+
+                "two switches")
+
+        main.step("Assign all switches")
+        main.Mininet1.assign_sw_controller(sw="1",
+                ip1=ONOS1_ip, port1=default_sw_port)
+        main.Mininet1.assign_sw_controller(sw="2",
+                ip1=ONOS1_ip, port1=default_sw_port)
+
+        main.step("Verifying switch assignment")
+        result_s1 = main.Mininet1.get_sw_controller(sw="s1")
+        result_s2 = main.Mininet1.get_sw_controller(sw="s2")
+          
+        #Allow time for events to finish before taking measurements
+        time.sleep(10)
+
+        link_down = False
+        #Start iteration of link event test
+        for i in range(0, int(num_iter)):
+            main.step("Getting initial system time as t0")
+            
+            timestamp_link_down_t0 = time.time() * 1000
+            #Link down is simulated by 100% loss rate using traffic 
+            #control command
+            main.Mininet1.handle.sendline(
+                    "sh tc qdisc add dev s1-eth1 root netem loss 100%")
+
+            #TODO: Iterate through 'links' command to verify that
+            #      link s1 -> s2 went down (loop timeout 30 seconds) 
+            #      on all 3 ONOS instances
+            main.log.info("Checking ONOS for link update")
+            loop_count = 0
+            while( not link_down and loop_count < 30 ):
+                json_str = main.ONOS1cli.links()
+                
+                if not json_str:
+                    main.log.error("CLI command returned error ")
+                    break
+                else:
+                    json_obj = json.loads(json_str)
+                for obj in json_obj:
+                    if '01' not in obj['src']['device']:
+                        link_down = True
+                        main.log.report("Link down from "+
+                                "s1 -> s2 on ONOS1 detected")
+                loop_count += 1
+                #If CLI doesn't like the continuous requests
+                #and exits in this loop, increase the sleep here.
+                #Consequently, while loop timeout will increase
+                time.sleep(1)
+    
+            #Give time for metrics measurement to catch up
+            #NOTE: May need to be configured more accurately
+            time.sleep(10)
+            #If we exited the while loop and link down 1,2,3 are still 
+            #false, then ONOS has failed to discover link down event
+            if not link_down:
+                main.log.info("Link down discovery failed")
+                
+                link_down_lat_graph1 = 0
+                link_down_lat_device1 = 0
+                assertion = main.FALSE
+            else:
+                json_topo_metrics_1 =\
+                        main.ONOS1cli.topology_events_metrics()
+                json_topo_metrics_1 = json.loads(json_topo_metrics_1)
+                
+                main.log.info("Obtaining graph and device timestamp")
+                graph_timestamp_1 = \
+                    json_topo_metrics_1[graphTimestamp]['value']
+
+                link_timestamp_1 = \
+                    json_topo_metrics_1[linkTimestamp]['value']
+
+                if graph_timestamp_1 and link_timestamp_1:
+                    link_down_lat_graph1 = int(graph_timestamp_1) -\
+                            timestamp_link_down_t0
+                
+                    link_down_lat_link1 = int(link_timestamp_1) -\
+                            timestamp_link_down_t0
+                else:
+                    main.log.error("There was an error calculating"+
+                        " the delta for link down event")
+                    link_down_lat_graph1 = 0
+                    
+                    link_down_lat_device1 = 0
+        
+            main.log.report("Link down latency ONOS1 iteration "+
+                    str(i)+" (end-to-end): "+
+                    str(link_down_lat_graph1)+" ms")
+            
+            main.log.report("Link down latency ONOS1 iteration "+
+                    str(i)+" (link-event-to-system-timestamp): "+
+                    str(link_down_lat_link1)+" ms")
+      
+            #Calculate avg of node calculations
+            link_down_lat_graph_avg = link_down_lat_graph1
+            link_down_lat_link_avg = link_down_lat_link1
+
+            #Set threshold and append latency to list
+            if link_down_lat_graph_avg > 0.0 and\
+               link_down_lat_graph_avg < 30000:
+                link_down_graph_to_system_list.append(
+                        link_down_lat_graph_avg)
+            else:
+                main.log.info("Link down latency exceeded threshold")
+                main.log.info("Results for iteration "+str(i)+
+                        "have been omitted")
+            if link_down_lat_link_avg > 0.0 and\
+               link_down_lat_link_avg < 30000:
+                link_down_link_to_system_list.append(
+                        link_down_lat_link_avg)
+            else:
+                main.log.info("Link down latency exceeded threshold")
+                main.log.info("Results for iteration "+str(i)+
+                        "have been omitted")
+
+            #NOTE: To remove loss rate and measure latency:
+            #       'sh tc qdisc del dev s1-eth1 root'
+            timestamp_link_up_t0 = time.time() * 1000
+            main.Mininet1.handle.sendline("sh tc qdisc del dev "+
+                    "s1-eth1 root")
+            main.Mininet1.handle.expect("mininet>")
+            
+            main.log.info("Checking ONOS for link update")
+            
+            link_down1 = True
+            loop_count = 0
+            while( link_down1 and loop_count < 30 ):
+                json_str1 = main.ONOS1cli.links()
+                if not json_str1:
+                    main.log.error("CLI command returned error ")
+                    break
+                else:
+                    json_obj1 = json.loads(json_str1)
+                
+                for obj1 in json_obj1:
+                    if '01' in obj1['src']['device']:
+                        link_down1 = False 
+                        main.log.report("Link up from "+
+                            "s1 -> s2 on ONOS1 detected")
+                loop_count += 1
+                time.sleep(1)
+            
+            if link_down1:
+                main.log.info("Link up discovery failed")
+                link_up_lat_graph1 = 0
+                link_up_lat_device1 = 0
+                assertion = main.FALSE
+            else:
+                json_topo_metrics_1 =\
+                        main.ONOS1cli.topology_events_metrics()
+                json_topo_metrics_1 = json.loads(json_topo_metrics_1)
+
+                main.log.info("Obtaining graph and device timestamp")
+                graph_timestamp_1 = \
+                    json_topo_metrics_1[graphTimestamp]['value']
+                
+                link_timestamp_1 = \
+                    json_topo_metrics_1[linkTimestamp]['value']
+
+                if graph_timestamp_1 and link_timestamp_1:
+                    link_up_lat_graph1 = int(graph_timestamp_1) -\
+                            timestamp_link_up_t0
+                    link_up_lat_link1 = int(link_timestamp_1) -\
+                            timestamp_link_up_t0
+                else:
+                    main.log.error("There was an error calculating"+
+                        " the delta for link down event")
+                    link_up_lat_graph1 = 0
+                    link_up_lat_device1 = 0
+        
+            main.log.info("Link up latency ONOS1 iteration "+
+                    str(i)+" (end-to-end): "+
+                    str(link_up_lat_graph1)+" ms")
+            
+            main.log.info("Link up latency ONOS1 iteration "+
+                    str(i)+" (link-event-to-system-timestamp): "+
+                    str(link_up_lat_link1)+" ms")
+      
+            #Calculate avg of node calculations
+            link_up_lat_graph_avg = link_up_lat_graph1
+            link_up_lat_link_avg = link_up_lat_link1
+
+            #Set threshold and append latency to list
+            if link_up_lat_graph_avg > 0.0 and\
+               link_up_lat_graph_avg < 30000:
+                link_up_graph_to_system_list.append(
+                        link_up_lat_graph_avg)
+            else:
+                main.log.info("Link up latency exceeded threshold")
+                main.log.info("Results for iteration "+str(i)+
+                        "have been omitted")
+            if link_up_lat_link_avg > 0.0 and\
+               link_up_lat_link_avg < 30000:
+                link_up_link_to_system_list.append(
+                        link_up_lat_link_avg)
+            else:
+                main.log.info("Link up latency exceeded threshold")
+                main.log.info("Results for iteration "+str(i)+
+                        "have been omitted")
+
+        #Calculate min, max, avg of list and report
+        link_down_min = min(link_down_graph_to_system_list)
+        link_down_max = max(link_down_graph_to_system_list)
+        link_down_avg = sum(link_down_graph_to_system_list) / \
+                        len(link_down_graph_to_system_list)
+        link_up_min = min(link_up_graph_to_system_list)
+        link_up_max = max(link_up_graph_to_system_list)
+        link_up_avg = sum(link_up_graph_to_system_list) / \
+                        len(link_up_graph_to_system_list)
+
+        main.log.report("Link down latency - Min: "+
+                str(link_down_min)+"ms  Max: "+
+                str(link_down_max)+"ms  Avg: "+
+                str(link_down_avg)+"ms")
+        main.log.report("Link up latency - Min: "+
+                str(link_up_min)+"ms  Max: "+
+                str(link_up_max)+"ms  Avg: "+
+                str(link_up_avg)+"ms")
+
+        utilities.assert_equals(expect=main.TRUE, actual=assertion,
+                onpass="Link discovery latency calculation successful",
+                onfail="Link discovery latency case failed")
+
+    def CASE5(self, main):
+        '''
+        100 Switch discovery latency
+
+        Important:
+            This test case can be potentially dangerous if 
+            your machine has previously set iptables rules.
+            One of the steps of the test case will flush
+            all existing iptables rules.
+        Note:
+            You can specify the number of switches in the 
+            params file to adjust the switch discovery size
+            (and specify the corresponding topology in Mininet1 
+            .topo file)
+        '''
+        import time
+        import subprocess
+        import os
+        import requests
+        import json
+
+        ONOS1_ip = main.params['CTRL']['ip1']
+        MN1_ip = main.params['MN']['ip1']
+        ONOS_user = main.params['CTRL']['user']
+
+        default_sw_port = main.params['CTRL']['port1']
+       
+        #Number of iterations of case
+        num_iter = main.params['TEST']['numIter']
+        num_sw = main.params['TEST']['numSwitch']
+
+        #Timestamp 'keys' for json metrics output.
+        #These are subject to change, hence moved into params
+        deviceTimestamp = main.params['JSON']['deviceTimestamp']
+        graphTimestamp = main.params['JSON']['graphTimestamp']
+   
+        tshark_ofp_output = "/tmp/tshark_ofp_"+num_sw+"sw.txt"
+        tshark_tcp_output = "/tmp/tshark_tcp_"+num_sw+"sw.txt"
+
+        tshark_ofp_result_list = []
+        tshark_tcp_result_list = []
+
+        main.case(num_sw+" Switch discovery latency")
+        main.step("Assigning all switches to ONOS1")
+        for i in range(1, int(num_sw)+1):
+            main.Mininet1.assign_sw_controller(
+                    sw=str(i),
+                    ip1=ONOS1_ip,
+                    port1=default_sw_port)
+        
+        #Ensure that nodes are configured with ptpd
+        #Just a warning message
+        main.log.info("Please check ptpd configuration to ensure"+\
+                " All nodes' system times are in sync")
+        time.sleep(5)
+
+        for i in range(0, int(num_iter)):
+            
+            main.step("Set iptables rule to block incoming sw connections")
+            #Set iptables rule to block incoming switch connections
+            #The rule description is as follows:
+            #   Append to INPUT rule,
+            #   behavior DROP that matches following:
+            #       * packet type: tcp
+            #       * source IP: MN1_ip
+            #       * destination PORT: 6633
+            main.ONOS1.handle.sendline(
+                    "sudo iptables -A INPUT -p tcp -s "+MN1_ip+
+                    " --dport "+default_sw_port+" -j DROP")
+            main.ONOS1.handle.expect("\$") 
+            #   Append to OUTPUT rule, 
+            #   behavior DROP that matches following:
+            #       * packet type: tcp
+            #       * source IP: MN1_ip
+            #       * destination PORT: 6633
+            main.ONOS1.handle.sendline(
+                    "sudo iptables -A OUTPUT -p tcp -s "+MN1_ip+
+                    " --dport "+default_sw_port+" -j DROP")
+            main.ONOS1.handle.expect("\$")
+            #Give time to allow rule to take effect
+            #NOTE: Sleep period may need to be configured 
+            #      based on the number of switches in the topology
+            main.log.info("Please wait for switch connection to "+
+                    "time out")
+            time.sleep(60)
+            
+            #Gather vendor OFP with tshark
+            main.ONOS1.tshark_grep("OFP 86 Vendor", 
+                    tshark_ofp_output)
+            main.ONOS1.tshark_grep("TCP 74 ",
+                    tshark_tcp_output)
+
+            #NOTE: Remove all iptables rule quickly (flush)
+            #      Before removal, obtain TestON timestamp at which 
+            #      removal took place
+            #      (ensuring nodes are configured via ptp)
+            #      sudo iptables -F
+            
+            t0_system = time.time() * 1000
+            main.ONOS1.handle.sendline(
+                    "sudo iptables -F")
+
+            #Counter to track loop count
+            counter_loop = 0
+            counter_avail1 = 0
+            onos1_dev = False
+            while counter_loop < 60:
+                #Continue to check devices for all device 
+                #availability. When all devices in all 3
+                #ONOS instances indicate that devices are available
+                #obtain graph event timestamp for t1.
+                device_str_obj1 = main.ONOS1cli.devices()
+                device_json1 = json.loads(device_str_obj1)                
+                
+                for device1 in device_json1:
+                    if device1['available'] == True:
+                        counter_avail1 += 1
+                        if counter_avail1 == int(num_sw):
+                            onos1_dev = True
+                            main.log.info("All devices have been "+
+                                    "discovered on ONOS1")
+                    else:
+                        counter_avail1 = 0
+
+                if onos1_dev: 
+                    main.log.info("All devices have been discovered "+
+                            "on all ONOS instances")
+                    json_str_topology_metrics_1 =\
+                        main.ONOS1cli.topology_events_metrics()
+                    #Exit while loop if all devices discovered
+                    break 
+                
+                counter_loop += 1
+                #Give some time in between CLI calls
+                #(will not affect measurement)
+                time.sleep(3)
+
+            main.ONOS1.tshark_stop()
+            
+            os.system("scp "+ONOS_user+"@"+ONOS1_ip+":"+
+                    tshark_ofp_output+" /tmp/") 
+            os.system("scp "+ONOS_user+"@"+ONOS1_ip+":"+
+                    tshark_tcp_output+" /tmp/")
+            ofp_file = open(tshark_ofp_output, 'r')
+
+            #The following is for information purpose only.
+            #TODO: Automate OFP output analysis
+            main.log.info("Tshark OFP Vendor output: ")
+            for line in ofp_file:
+                tshark_ofp_result_list.append(line)
+                main.log.info(line)
+
+            ofp_file.close()
+
+            tcp_file = open(tshark_tcp_output, 'r')
+            main.log.info("Tshark TCP 74 output: ")
+            for line in tcp_file:
+                tshark_tcp_result_list.append(line)
+                main.log.info(line)
+
+            tcp_file.close()
+
+            json_obj_1 = json.loads(json_str_topology_metrics_1)
+
+            graph_timestamp_1 = \
+                    json_obj_1[graphTimestamp]['value']
+
+            main.log.info(
+                    int(graph_timestamp_1) - int(t0_system))
+
+
+
+
+
+
+
diff --git a/TestON/tests/TopoPerfNextSingleNode/TopoPerfNextSingleNode.topo b/TestON/tests/TopoPerfNextSingleNode/TopoPerfNextSingleNode.topo
new file mode 100644
index 0000000..3fc7bdc
--- /dev/null
+++ b/TestON/tests/TopoPerfNextSingleNode/TopoPerfNextSingleNode.topo
@@ -0,0 +1,55 @@
+<TOPOLOGY>
+    <COMPONENT>
+        
+        <ONOSbench>
+            <host>10.128.174.10</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosDriver</type>
+            <connect_order>1</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </ONOSbench>
+
+        <ONOS1cli>
+            <host>10.128.174.10</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosCliDriver</type>
+            <connect_order>2</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </ONOS1cli>
+        
+        <ONOS1>
+            <host>10.128.174.1</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>OnosDriver</type>
+            <connect_order>3</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </ONOS1>
+
+        <Mininet1>
+            <host>10.128.10.90</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>MininetCliDriver</type>
+            <connect_order>4</connect_order>
+            <COMPONENTS>
+                <arg1> --custom topo-100sw.py </arg1>
+                <arg2> --arp --mac --topo mytopo</arg2>
+                <arg3> </arg3>
+                <controller> remote </controller>
+            </COMPONENTS>
+        </Mininet1>
+
+        <Mininet2>
+            <host>10.128.10.90</host>
+            <user>admin</user>
+            <password>onos_test</password>
+            <type>RemoteMininetDriver</type>
+            <connect_order>5</connect_order>
+            <COMPONENTS> </COMPONENTS>
+        </Mininet2>
+
+    </COMPONENT>
+</TOPOLOGY>